After installing TomTom7, my quick list screen, activated by holding down the end-call button, takes about 5-10 seconds before it appears. Before installing TomTom it came up pretty much instantly.
It's a bit annoying as I like using it to lock the device or set vibrate quickly.
Has anyone else had the same issue, and managed to fix it?
Thanks all!
Related
Hi, i have just got a new xda orbit and noticed that when the backlight goes off after a set period (30 secs), it seems to be still lit but only very slighty, so at night you still see the today screen etc. But if i press the power button then the display goes off. Is this correct ?
The reason im asking as i have been using an xda mini s for over a year and when the backlight times out the display is not visible at all in the dark. You have to press the power button to see the screen again.
Hope this makes sense
Yes, that is fine. The dim backlight will go out in time too.
MaskedMarauder is 100% right. It will go out eventually.
Ok thanks guys for the quick reply, just obsevered it last night and noticed it was different.
Thanks again...
I've tried posting about this before, but it never gets answered - i've got a mda III, and that dims to brightness 1 (from within the registry), but will never go out - regardless of what rom i've tried.
I've also noticed that i can force set it to 0 in the registry, but thats the overall screen brightness. None of the other reg keys (putting bkl1:, etc in the various power keys) seem to work.
Any one got any ideas or utils to sort this? I'd try to code this as there are some code samples which allow you to force this, but i've not got VS
Like you i've tried all the registry edits i can think off to no avail. I too have a wizard and find this irritating - plus backllight stays on when media player on etc.. No difference with wm6 so i guess it maybe a hardware issue. I use a small app to turn off display when apps are running and i want the display off.
I use backlight time of 30 secs and power of 1 minute - so overall similar to my wizards backlight time of 1 minute.
why not..
why not just pres the I/O button on the side to turn off the backlight when u don't want it on? obviosuly a bit of a hassle, but if u get into the habit of doing it, no problems
Because that puts the device into standby and turns everything else off too (except the phone etc.) So if your listening to music your plunged into silence.
I had an XDA2i (Alpine) previous to my Orbit and I actually prefer the dimmed screen.
A brief press on the 1/0 power button WILL make the device go into standby.... BUT...
press and HOLD the power button for LONGER than 2-3 seconds and it toggles the backlight on and off, whilst STILL keeping the device on!
hope this helps
Joe
I've just installed Schaps 3.54c on a friend's JasJam. She now has a strange issue where she turns the screen on, taps on the Today screen to unlock the device and then pressing the green phone button doesn't do anything. But if you tap Start then go into Programs or Settings and THEN try the green button, it works fine!
Has anyone experienced this?
i have notice this little bug now and again, i just have to click the ok button then i get all control back to the call button.
Not sure what causes it though.
Its like another proggy is running in the background.
It's been three days since I have a small bug sometimes.
Sometimes when I press the button to turn on my device the phone wake up (the buttons light up) but the screen sty off... The only thing I can do is a softreset and then everything is all right...
Does someone have the same problem and is ther a fix?
Thanks for the answer
Happens to me sometimes too
I guess the ROM is not 100% stable yet... Let's pary 6.5 will be out soon ! (With TF3D 2.5 or even better with the new sense interface !)
same problem here, if he stays off you can hear de volume butons if you press them so it is only the screen or something.
also when i slide out the keyboard, the screen is rotating realy slow and bit by bit. hope for a soon spl and custom (nrg) rom
paulaafjes said:
same problem here, if he stays off you can hear de volume butons if you press them so it is only the screen or something.
also when i slide out the keyboard, the screen is rotating realy slow and bit by bit. hope for a soon spl and custom (nrg) rom
Click to expand...
Click to collapse
Have this too, sometimes. I thought it was due to WAD which sometimes uses way too much CPU.
But the screen not comming off is really annoying! And I don't know why this happens.
I removed SPB Pocket Plus and did not experience this problem again - I think it's just coincidence, but still... You could try!
UPDATE
It seems to happens very very more often if I use the camera apps.
Sebacestmoi_666 said:
It's been three days since I have a small bug sometimes.
Sometimes when I press the button to turn on my device the phone wake up (the buttons light up) but the screen sty off... The only thing I can do is a softreset and then everything is all right...
Does someone have the same problem and is ther a fix?
Thanks for the answer
Click to expand...
Click to collapse
1 More here..
got the same problem .... but then I just keep trying to turn the screen on with the on/off button .... that always works after a few tries
Text msg wont wake up phone
Is this normal? when I receive a text msg, the phone doesnt wake up. My TyTN II woke up when a text msg came through
When I boot up after reset or power off, the homescreen displays top task bar, bottom soft keys, and displays "launching TouchFlo3D..." and then... nothing. The screen stays like this until I tap it, and then it displays the home screen. Anybody else seeing this?
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
I have never got no one to answer a question on here good luck...
PaulusUK said:
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
Click to expand...
Click to collapse
Does touching the screen make it start?
I know that not turning off TF3D before installing some cabs can make it behave oddly- TF3D restarts, fails to launch at boot, etc...
Mine does the same thing except its just a plain screen until I touch it then it says launching tflo
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
acrh2 said:
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
Click to expand...
Click to collapse
It has something to do with the PIN lock code, you're right.. now we just need someone to look into this further who knows how to troubleshoot these issues from the back-end.
Bump for more answers!
-mak
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile
I've got a new (to me) AT&T Note 4 and only after getting it did I realize I couldn't root it because.....AT&T.... Anyways, it's on MM 6.0.1 now and I'm having a massively irritating issue that I can't find anywhere else online for reference. After roughly 15-30 minutes after I restart the phone, 3 things happen simultaneously.
1: Screen rotation stops working (except when I get a notification for textra from the pulldown menu and reply, then in that reply state, I can turn the phone and it will successfully rotate). I've checked the sensors and they're fine and working properly. I can use the rotate app to force rotation successfully and it doesn't matter if I have the rotation icon on or off, it will not auto rotate which makes nav apps a pain in the butt to have to keep restarting the phone for only a few minutes of working.
2: Home button stops working to go home. The physical button still works if I long press then google app comes up, but short press does nothing.
3: Menu button stops working completely, no response at all short or long press.
If anyone has a reference to point me towards or an idea of what's happening, I would love to figure this out so I don't want to throw my phone out the window after only a week. Thank you!
astral_aura said:
i've got a new (to me) at&t note 4 and only after getting it did i realize i couldn't root it because.....at&t.... Anyways, it's on mm 6.0.1 now and i'm having a massively irritating issue that i can't find anywhere else online for reference. After roughly 15-30 minutes after i restart the phone, 3 things happen simultaneously.
1: Screen rotation stops working (except when i get a notification for textra from the pulldown menu and reply, then in that reply state, i can turn the phone and it will successfully rotate). I've checked the sensors and they're fine and working properly. I can use the rotate app to force rotation successfully and it doesn't matter if i have the rotation icon on or off, it will not auto rotate which makes nav apps a pain in the butt to have to keep restarting the phone for only a few minutes of working.
2: Home button stops working to go home. The physical button still works if i long press then google app comes up, but short press does nothing.
3: Menu button stops working completely, no response at all short or long press.
If anyone has a reference to point me towards or an idea of what's happening, i would love to figure this out so i don't want to throw my phone out the window after only a week. Thank you!
Click to expand...
Click to collapse
i have the same problem, have you found anything?????