Ok, i try to explain how to change the position of new tab with my poor english.
Because I've see, there is a bug in TF3D 15-TAB if you try to change the original position with "advanced config" or "diamond config editor"
For example, if you try to move the "call history" and "calendar" before the sms tab, the sms tab in the TF3D will be hidden, and the new tabs will be named "unknow" (in advanced config and Diamond Config) and you don't know what the hell are you moving.
- Uninstall 15 Tab TF3D
- Turn off and Turn on the HD.
- Open the registry and add at this position these entries:
[HKEY_CURRENT_USER\\Software\HTC\Manila]
"Manila://calendar.page.hidden" -> DWORD Data=0
[HKEY_LOCAL_MACHINE\\Software\HTC\Manila\Configurat ion\11]
"Title"="Calendar"
"PageName"="Manila://calendar.page"
"Enable"=0
[HKEY_CURRENT_USER\\Software\HTC\Manila]
"Manila://sounds.page.hidden" -> DWORD Data=0
[HKEY_LOCAL_MACHINE\\Software\HTC\Manila\Configurat ion\12]
"Title"="Sounds"
"PageName"="Manila://sounds.page"
"Enable"=0
[HKEY_CURRENT_USER\\Software\HTC\Manila]
"Manila://communications.page.hidden" -> DWORD Data=0
[HKEY_LOCAL_MACHINE\\Software\HTC\Manila\Configurat ion\13]
"Title"="Communications"
"PageName"="Manila://communications.page"
"Enable"=0
[HKEY_CURRENT_USER\\Software\HTC\Manila]
"Manila://callhistory.page.hidden" -> DWORD Data=0
[HKEY_LOCAL_MACHINE\\Software\HTC\Manila\Configurat ion\14]
"Title"="[[IDS_CALLLOGTITLE]]"
"PageName"="Manila://callhistory.page"
"Enable"=0
11 (12, 13 and 14) are a new "KEY"
"Enable" is a "DWORD Value"
"Title" is a"String Value"
"PageName" is a "String Value"
- Now, after these modify, close the registry editor and turn off the HD (don't do a soft reset)
- Turn on the HD, and go in the Tab "settings" and click in the "Tab settings position", you'll find the new entries, check it, and move the tabs where you want and press "ok".
- Now, reinstall the TF3D 15 Tabs
et voilà, you'll find the new tabs in the position where you have choose before.
I hope you can understand my english...
see you!
ok guys! I've found the last value for call history, i've modify my previous post adding the 14 value!
Domanda: a me serve solo sostituire il tab delle azioni della borsa con uno di Comm-Manager. E' possibile? (senza dover cambiare tutto il mondo).
Excellent. Thanks for this. Works a treat. Do you think there would be a way to enable the "Tab settings position" settings after the 15 tabs are installed
Hi
Thanks for this tutorial. Can you or someone make it easier with a cab, which adds this keys, because it's much work to type all these registry keys.
Thanks
if someone can make a cab file to simply change the tabs around, as I have noticed, if you have like Weather not on the tabs in the first place you cant get it back
btw where do i find this registery? ... Ive never done registerys on PDA's b4
where and what is the name of this registry?
Is there no way of changing the layout after installing the 15-Tabs?
15-Tab cab File
Hey,
I have created a CAB file for this registry edit, at the moment you still have to uninstall the 15-Tab Program first. The reason for this is that the Customise tabs program; program. I will try and make it so you can get this program back in the settings but untill then (or if I just generally don't this will have to do).
ToxicDragon said:
Hey,
I have created a CAB file for this registry edit, at the moment you still have to uninstall the 15-Tab Program first. The reason for this is that the Customise tabs program; program. I will try and make it so you can get this program back in the settings but untill then (or if I just generally don't this will have to do).
Click to expand...
Click to collapse
Thanks a lot!!! This was really helpful!!!!
What about getting this back to the settings tab? Is there any result?
Cheers!
Hi, can someone make a cab file for adding only a "call history" tab on tf3d?
I need this tab only.
Thank you very much...
Hi,
look here: http://forum.xda-developers.com/showthread.php?t=450278
wfg
starbase64
starbase64 said:
Hi,
look here: http://forum.xda-developers.com/showthread.php?t=450278
wfg
starbase64
Click to expand...
Click to collapse
Thanks, but it seems not only the "call history" but 15-tab! In fact, I wanna install a 15-tab on my tf3d, but there is no traditional chinese file for me, I also don't know how to change it(I've read that post already, but its really too complicate for me), but I found the "call history" tab seems can displayed in traditional chinese.
Hi, if I put the words translation from English to Traditional Chinese here, can someone make a Traditional Chinese version of TF3D 15-tab for me? I really want to have such a file, but I am afraid that I'm not understand how to make it. Hope someone can help me, thank you very much....
Home = 首頁
Contacts = 人物
Messages = 訊息
Mails = 郵件
Weather = 氣象
Stocks = 股票
Internet = 網際網路
Photos/Videos = 相片及影片
Musics = 音樂
Setting = 設定
Programs = 程式集
Call History = 通話記錄
Comm Mgr = 通訊管理員
Calendar = 月曆
Sounds Setting= 響鈴設定
This is a combination of Sid-Shrunk´s IFonz Weather Mortscript and superflysocal´s s2u2 weather Mortscript + modifications made by me to display in IPhonetoday
What it does?
- It displays actual temp + todays forecast in IPhonetoday as an icon
- In Icon click it displays 4 days forecast as icons in IPhonetoday
- It displays todays forecast in the s2u2 slider (Version 1.30 and above) and s2u2 Wallpaper
- It displays tomorrows forecast in s2u2 weather option
- It translates the forecasts (right now only to german feel free to edit and repost)
- It "crops"/changes the forecasts to ~ 14 chars to fit s2u2´s slider and forecast
Install:
- Install Mortscript
- download and extract the zip
- copy s2u2 folder to your Program Files folder (Overwrite files if prompted) [This is optional if you don´t use s2u2 just leave this out and set s2u2forecast=0 in the weather ini]
- copy iPhonetoday folder to your root folder (Overwrite files if prompted, won´t mess with your settings)
- change the settings to your desires in weather.ini in /Iphonetoday/
- start getweather.mscr in /Iphonetoday/weather/ (If you want you can put it into the autostart folder)
For background Development i added the source .psd´s and a script for photoshop for batch processing (In the devtools zip)
Thanks go out to:
- MiToNiOeS for the fantastic IPhonetoday
- A_C for the fantastic S2U2
- Mort for his Mortscript
- superflysocal for his weather wallpaper script which had a big influence on this (Pointing me to mortscript!) and for his wallpapers
- schettj for providing the and base for this script
- Sid-Shrunk who also provided the base for this script
- bluemetalaxe for his Realize weather icons
- someone I can´t remember who proivided the diamond weather png´s (Sorry! Please speak up if you are the one)
- someone I can´t remember for making Refreshtoday.exe (Sorry! Please speak up if you are the one)
Feel free to make Icons and translations for your language and post them here(just look for the translation section in getweather.mscr
Only QVGA for now but also feel free to create Icons backgounds for different resolutions and upload them.
This is the weather.ini
; General settings
;--------------------------------------------
;
location=
;this is your location code(see http://weather.yahoo.com/ on finding your location)
units=c
;this sets the units for temperatures f for farenheit c for celsius
GSMConnection=
;your internetconnection("The Internet","Internet","My ISP"..see settings/connections ...) If you only want to use available connections set GSMConnection=
doe=0
;set this to 1 to Disconnect on exit if Connection was established(doest work on all devices/settings)
bdc=0
;Bypass disabled connection (nodata i.e)
delayHours=1
delayMinutes=0
;how often to try and get the weather
nodata=No Data
;weather text to display when no data availible
dataerror=Data Error
;weather text to display when data corrupted
translate=1
;translate forecasts if set to 1 (note: can also be used to correct forecast to the right legth for the wallpaper theme)
; S2U2 settings
;-------------------------------------------
;
s2u2forecast=1
;set this to 0 to disable the s2u2 forecast completely
s2u2path=\program files\s2u2\
;this sets the path to s2u2
useweatherwallpaper=1
;set this to 0 to disable weather wallpaper
wallpaperfolder=\programme\s2u2\gfx\wallpaper\
;this sets the path to the s2u2 weather wallpapers
wallpapertype=.jpg
;this determines the file type of the wallpapers for s2u2
defwallpaper=def
;this wallpaper is displayed when there is no weather data available (use this without the file extention)
defs2u2text=slide to unlock
;this text is displayed in the slider when there is no weather data available
;
; IPhonetoday settings
;-------------------------------------------
;
iPhonetodayPixPath=\iPhoneToday\icons\weather\
;this sets the path to the weathericons for iPhonetoday
forecastdisplayrow=3
;this sets the row where the 4 day forecast is shown
forecastpageselect=0
;this sets the page where the 4 day forecast is shown
actualdisplayrow=3
;this sets the row in which the actual weather icon is shown
actualcolumn=1
;this sets the column in which the actual weather icon is shown
actualpageselect=0
;this sets the page in which the actual weather icon is shown
iPhonetodayTorF=0
;set this to 0 to display the Temperature values and to 1 to display the forecast text
noweather=0
;Weather Picture if no data available (without file extention)
Preparation
FIRST and MOST IMPORTANT: Back up your phone
1. Download and install iPhoneToday (http://forum.xda-developers.com/showthread.php?t=508429)
1. For my install walkthrough of IphoneToday visit: http://james27007.tripod.com/iPhone-Install.htm
2. Download the weather.zip file from the first post(http://forum.xda-developers.com/showthread.php?t=480686)
3. Unzip the weather.zip file
4. Open the weather.ini file and edit to your settings. Each line is explained in the file. I recommend leaving the settings alone and only changing the location and data connection type.
5. Download and install Mortscript (http://www.sto-helit.de/forum/)
6. Download and install S2U2 (http://s2u2.eqvipage.dk/)
1. Optional Here is the English version http://forum.xda-developers.com/showpost.php?p=4038445&postcount=29
----------------------
Editing the weather.ini file
On the PC Edit the weather.ini file with notepad. There are here is the entire file. Below is the settings I edit/changed :
; General settings
;--------------------------------------------
;
location=
;this is your location code(see http://weather.yahoo.com/ on finding your location)
units=
;this sets the units for temperatures f for farenheit c for celsius
GSMConnection=
;your internetconnection("The Internet","Internet","My ISP"..see settings/connections ...) If you only want to use available connections set GSMConnection=
doe=0
;Disconnect on exit if Connection was established(doest work on all devices/settings)
bdc=0
;Bypass disabled connection (nodata i.e)
delayHours=1
delayMinutes=0
;how often to try and get the weather
nodata=No Data
;weather text to display when no data availible
dataerror=Data Error
;weather text to display when data corrupted
translate=1
;translate forecasts if set to 1 (note: can also be used to correct forecast to the right legth for the wallpaper theme)
; S2U2 settings
;-------------------------------------------
;
s2u2forecast=1
;set this to 0 to disable the s2u2 forecast completely
s2u2path=\program files\s2u2\
;this sets the path to s2u2
useweatherwallpaper=1
;set this to 0 to disable weather wallpaper
wallpaperfolder=\programme\s2u2\gfx\wallpaper\
;this sets the path to the s2u2 weather wallpapers
wallpapertype=.jpg
;this determines the file type of the wallpapers for s2u2
defwallpaper=def
;this wallpaper is displayed when there is no weather data available (use this without the file extention)
defs2u2text=slide to unlock
;this text is displayed in the slider when there is no weather data available
;
; IPhonetoday settings
;-------------------------------------------
;
iPhonetodayPixPath=\iPhoneToday\icons\weather\
;this sets the path to the weathericons for iPhonetoday
forecastdisplayrow=3
;this sets the row where the 4 day forecast is shown
forecastpageselect=0
;this sets the page where the 4 day forecast is shown
actualdisplayrow=3
;this sets the row in which the actual weather icon is shown
actualcolumn = 1
;this sets the column in which the actual weather icon is shown
actualpageselect = 0
;this sets the page in which the actual weather icon is shown
iPhonetodayTorF=0
;set this to 0 to display the Temperature values and to 1 to display the forecast text
noweather=0
;Weather Picture if no data available (without file extention)
----------------------
Most settings have a perfect explanation; here are the ones I edited or changed for English settings
General Settings
1. You need to go to http://weather.yahoo.com/ and look up your location. In the URL you will see after the location a country code. Here are some examples
a. For Sacramento, CA, USA this was the URL:
b. weather.yahoo.com/forecast/USCA0967.html
c. So use USCA0967 as the location
d. For Berman, Germany this was the URL:
e. weather.yahoo.com/forecast/GMXX0014.html
f. So use GMXX0014 as the location
g. For Hong Kong, China this was the URL
h. weather.yahoo.com/forecast/CHXX0170.html
i. So use CHXX0170
2. units=
a. use C for Celsius and F for Fahrenheit
3. GSMConnection=
a. This is how your phone connects to the internet. Leave blank if you want it to use any available connection. Or to set your standard you need to look up your connection:
b. Press Start --> Settings --> Connections --> Connections --> select the Advanced tab --> Select Networks
c. The name in the top drop down box is your connection. I have AT&T so I use Media Net; other possibilities are "The Internet", "Internet", and "My ISP”
4. nodata=No Data
a. This the text that will display when you have no data, I like using “searching”
5. dataerror=Data Error
a. This the text that will display when you have a data error, I leave this alone
S2U2 Settings
6. s2u2forecast=1
a. change to 0 to disable S2U2 completly
7. s2u2path=\program files\s2u2\
a. this sets the path to s2u2 program CHECK LOCATION AND SPELLING!
8. useweatherwallpaper=1
a. set this to 0 to disable weather wallpaper
9. wallpaperfolder=\ program files \s2u2\gfx\wallpaper\
a. this sets the path to s2u2 wallpaper CHECK LOCATION AND SPELLING!
iPhone Today Settings
I left these alone, but the explanations under each line explains it perfectly.
You can Mess with other settings, however I do not recommend it unless you really know what you are doing
----------------------
How to install:
1. On your PC, open “My Computer”, then open your device. You can also use Active Sync, but this is a lot easier. Once you open your device you will be looking at the phone’s root directory; you will navigate from here to copy the files over.
2. On your PC, open the weather folder, open the S2U2 folder, then open the gfx folder. Copy the contests of the gfx folder to your phone under your phone’s \program files\S2U2\gfx folder
3. On your PC, open the weather folder and open the iPhoneToday folder. Copy the Weather folder in there, the weather.ini and Refresh Today.exe files to your phone’s iPhoneToday folder in the root directory, not the one in program files!
4. On your PC, open the weather folder, open the iPhoneToday folder then open the icons folder and copy the weather folder in there to your phone’s iPhoneToday\icons folder.
Here is what the folder tree looks like after you have copied the filter to you phone
5. On your phone, create an icon and point it to the getweather.mscr in your \iPhoneToday\Weather folder. This will start the program.
6. For an auto start option, copy the getweather.mscr to your \windows\startup folder. That way it will run every time you start your phone.
----------------------
S2U2 Settings
When enabled the S2U2 will display tomorrow’s forecast
The only thing you need to do is go into S2U2 settings and set the "Today's Weather Forecast from" to "UserWeather"
If your background is not showing, verify what location it is looking in for the background; there may be a typo in the weather.ini file
----------------------
How it works
When you run getweather.mscr, your phone will connect to the internet and a new icon will appear on your 1st page of iPhoneToday. Note it may overwrite some of the icons. To avoid this place only 4 icons on the top row, that way the icons will be placed under that.
The new icon will be the actual weather for your area. When you press that icon it will be replaced with the forecast for the next 4 days.
To return back to the current weather, press any of the 4 forecast icons, this will remove them and restore the original current weather icon.
Wonderfull !!!!!!!!!
I wonder where can I get the same taskbar.
I would love to have the same as you (battery signalstrength ect.)
Eric
Ok, I copied the files and then ran the getweather.mscr, and the iPhonetodayWeather.mscr, Icons popped up, but I don't think my data connection is working. In setings --> Connections --> Connections It says i connect through "MEdia Net" YEA at&t. Is that what I use in the weather.ini file?
Also what exactly does the mscr files do? And can I move the weather icons to another page on iPhone today?
j101399j said:
Also what exactly does the mscr files do? And can I move the weather icons to another page on iPhone today?
Click to expand...
Click to collapse
Well the mscr files parse the icons.xml seperate it into pages and icons (only in code not in the xml itself) than it replaces the icons you specified in the weather.ini and writes it into the icons.xml. Then it refreshes using refreshtoday.exe. When you click on the icons again it copies a backup of the old icons.xml over the new icons.xml and refreshes again and voila you have the old icons back.
You can move the Weather-Icon to other pages by the weather ini
Just edit "actualpageselect=" and forecastpageselect=
But on refreshing it will always start on the first page. (No way around for now)
hello!
I would like to use your weather scripts & Co. but all I got is what you can see on my screenshot
If I lock my device with S2U2 I cannot see any difference - and no weather information appears
I'm quit sure to copy and edit everthing to your advice but I perhaps I didn't understand it or I miss to do other stuff before.
Can you please explain once more every single step to get a similar result to yours? If something would look ugly (because I use vga diamond) I will change it later on, first I want to see any result.
What I did:
- installed MortScript
- copied S2U2 gfx files
- copied iPhoneToday files from zip
- edited weather.ini
==> location="GMXX0007" for "Berlin"?
==> GSMConnection="VF DE Web" for my vodafone provider
- edited pathname of S2U2
- edited icon position for weather icon & forcast
I would be very happy for any idea
PS: or should I send pm in german
oops - where is the picture?
moesfeld said:
Well the mscr files parse the icons.xml seperate it into pages and icons (only in code not in the xml itself) than it replaces the icons you specified in the weather.ini and writes it into the icons.xml. Then it refreshes using refreshtoday.exe. When you click on the icons again it copies a backup of the old icons.xml over the new icons.xml and refreshes again and voila you have the old icons back.
You can move the Weather-Icon to other pages by the weather ini
Just edit "actualpageselect=" and forecastpageselect=
But on refreshing it will always start on the first page. (No way around for now)
Click to expand...
Click to collapse
Make a lot more sence. Thank you
So I will specify the icons that get changed, a 1st page with one icon. I would like the weather by itself on one page. Still having a hard time setting my location and data connection. When I get that fixed, I'll repost.
By the way, when I use the weather.yahoo.com link and put in my location (well the location where I work) it comes back as Riverside/March AFB Weather is that what I would put for my location? Or put Riverside, CA?MAybe an example of a location. I still get "No Data"; and I left the connection method blank.
j101399j said:
Make a lot more sence. Thank you
So I will specify the icons that get changed, a 1st page with one icon. I would like the weather by itself on one page. Still having a hard time setting my location and data connection. When I get that fixed, I'll repost.
By the way, when I use the weather.yahoo.com link and put in my location (well the location where I work) it comes back as Riverside/March AFB Weather is that what I would put for my location? Or put Riverside, CA?MAybe an example of a location. I still get "No Data"; and I left the connection method blank.
Click to expand...
Click to collapse
You have to put the city code USCA0949 in your case
stevieray said:
hello!
I would like to use your weather scripts & Co. but all I got is what you can see on my screenshot
If I lock my device with S2U2 I cannot see any difference - and no weather information appears
I'm quit sure to copy and edit everthing to your advice but I perhaps I didn't understand it or I miss to do other stuff before.
Can you please explain once more every single step to get a similar result to yours? If something would look ugly (because I use vga diamond) I will change it later on, first I want to see any result.
What I did:
- installed MortScript
- copied S2U2 gfx files
- copied iPhoneToday files from zip
- edited weather.ini
==> location="GMXX0007" for "Berlin"?
==> GSMConnection="VF DE Web" for my vodafone provider
- edited pathname of S2U2
- edited icon position for weather icon & forcast
I would be very happy for any idea
PS: or should I send pm in german
Click to expand...
Click to collapse
Evereything you described looks right. I´ll post a different getweather.mscr that will show errors later.
I have some questions to pinpoint the error:
- Did you try running getweather.mscr when on wifi connection?
- Does the script connect correctly to the Internet?
- Do you have IPhonetoday installed? (If not I will try to make a standalone version for s2u2)
P.s. I think you forgott the screenshot
moesfeld said:
You have to put the city code USCA0949 in your case
Click to expand...
Click to collapse
Now I see it, when I went to the http://weather.yahoo.com the code is in the URL. For Riverside, CA this was the URL:
...weather.yahoo.com/Riverside-California-United-States/USCA0949/forec...
So the USCA0949 is the location I needed.
Thanks
Changed it and I got the "No Data" message. My connection is MEdia Net; I 1st left the GSMConnection= ,blank and it did not connect. Then I added MEdia Net and it worked both on iPhone today and S2U2.
Thank you
First thank you for your answer!
moesfeld said:
- Did you try running getweather.mscr when on wifi connection?
Click to expand...
Click to collapse
No. And what about the "iPhoneTodayWeather.mscr"?
- Does the script connect correctly to the Internet?
Click to expand...
Click to collapse
how do I know? First I tried while connected via ActiveSync - this wouldn't give access to internet I think. Then tried again standalone.
I tried to insert a "message" command in getweather.mcr to trace the script but I didn't see anything on the screen
- Do you have IPhonetoday installed?
Click to expand...
Click to collapse
yes I have. First v0.9.1 then back to v0.9.1.
P.s. I think you forgott the screenshot
Click to expand...
Click to collapse
oops - you are so right and I am so
PS: one more hint: RefreshToday.mscr doesn't do anything
don't believe it!
I'm so sorry!
Now I at home, I at once added the missing screenshot and then...
I tried again the getweather script.
And what happened?
1st: I got an error: no internet... - because I was connected via ActiveSync. Then took off the cable and tried again.
2nd: I saw my traceback message command
and then - tataaaaaaa!!!
I had all the weather stuff as you gave it to us
Now I have to change the qvga wallpaper to vga (for S2U2)
Thank you anyway!!!
Translation?
Quick question, how do I translate? Is this part of the section in the getweather.mscr?
Code:
#Replace forecasts with language specific (also convert to ~ 14 chars legth [depends on width of the word trial&error])
if (translate = 1)
#Remove prefixes in forcasts
cond[FCCounter] = Replace(cond[FCCounter], "AM ", "")
cond[FCCounter] = Replace(cond[FCCounter], "PM ", "")
cond[FCCounter] = Replace(cond[FCCounter], " Early", "")
cond[FCCounter] = Replace(cond[FCCounter], " Late", "")
cond[FCCounter] = Replace(cond[FCCounter], "Few ", "")
cond[FCCounter] = Replace(cond[FCCounter], "Scattered ", "")
#Replace Partial forecasts (e.g. Light Rain/Fog (First line[the ones ending with /] sould be ~8 chars (including /) Second line [starting with /] sould be ~ 7 chars (including /))
# Partly section(Partial)
cond[FCCounter] = Replace(cond[FCCounter], "/Partly Cloudy", "/T.Bewö")
cond[FCCounter] = Replace(cond[FCCounter], "Partly Cloudy/", "T.Bewöl/")
# Mostly section(Partial)
cond[FCCounter] = Replace(cond[FCCounter], "/Mostly Sunny", "/M.Sonn")
cond[FCCounter] = Replace(cond[FCCounter], "Mostly Sunny/", "M.Sonn./")
So would I change
cond[FCCounter] = Replace(cond[FCCounter], "/Partly Cloudy", "/T.Bewö")
cond[FCCounter] = Replace(cond[FCCounter], "Partly Cloudy/", "T.Bewöl/")
with
cond[FCCounter] = Replace(cond[FCCounter], "/Partly Cloudy", "/PartCldy")
cond[FCCounter] = Replace(cond[FCCounter], "Partly Cloudy/", "PartCldy/")
j101399j said:
Quick question, how do I translate? Is this part of the section in the getweather.mscr?
Code:
#Replace forecasts with language specific (also convert to ~ 14 chars legth [depends on width of the word trial&error])
if (translate = 1)
#Remove prefixes in forcasts
cond[FCCounter] = Replace(cond[FCCounter], "AM ", "")
cond[FCCounter] = Replace(cond[FCCounter], "PM ", "")
cond[FCCounter] = Replace(cond[FCCounter], " Early", "")
cond[FCCounter] = Replace(cond[FCCounter], " Late", "")
cond[FCCounter] = Replace(cond[FCCounter], "Few ", "")
cond[FCCounter] = Replace(cond[FCCounter], "Scattered ", "")
#Replace Partial forecasts (e.g. Light Rain/Fog (First line[the ones ending with /] sould be ~8 chars (including /) Second line [starting with /] sould be ~ 7 chars (including /))
# Partly section(Partial)
cond[FCCounter] = Replace(cond[FCCounter], "/Partly Cloudy", "/T.Bewö")
cond[FCCounter] = Replace(cond[FCCounter], "Partly Cloudy/", "T.Bewöl/")
# Mostly section(Partial)
cond[FCCounter] = Replace(cond[FCCounter], "/Mostly Sunny", "/M.Sonn")
cond[FCCounter] = Replace(cond[FCCounter], "Mostly Sunny/", "M.Sonn./")
So would I change
cond[FCCounter] = Replace(cond[FCCounter], "/Partly Cloudy", "/T.Bewö")
cond[FCCounter] = Replace(cond[FCCounter], "Partly Cloudy/", "T.Bewöl/")
with
cond[FCCounter] = Replace(cond[FCCounter], "/Partly Cloudy", "/PartCldy")
cond[FCCounter] = Replace(cond[FCCounter], "Partly Cloudy/", "PartCldy/")
Click to expand...
Click to collapse
Yes that looks right.
Would you mind sharing your translation when you are done?
moesfeld said:
Yes that looks right.
Would you mind sharing your translation when you are done?
Click to expand...
Click to collapse
YES. I will be happy to this is a really fun program
One thing, I am having a very hard time getting the icons to place and show up. I moved the files to the correct location. Changed the location to the USCA#### for my area; set the GSM to MEdia Net. Pressed the getweather.mscr (I added an icon). After a short while I get 1 icon (active temp) on the 0 page in the 3rd row in the 1st position. The 4 forcast icons never shows up. When I press the active icon or rune iPhoneTodayWeather.mscr the forcast icons show up and the active icons goes away.
So I restarted, presses the getweather.mscr, moved the active icon to the bottom bar, so it showed and the forcast did not cover it. YEA!!! But now it does not update. It has stayed at 82 degrees F all night and so far through today. Is it becasue I used the UI to move the icons?
And if I try to change the positions of the icons in the weather.ini file, they get all messed up.
Also how do I translate S2U2? [edit] Just found that I need to change the icons and pictures in S2U2 to change the Morgen. Also I can't get the weather background to work I'll report when I do.
I am trying to understand as much as possible, that way I can (with your premission) also make a walkthrough for this and add it to the iPhone Today Walkthrough
moesfeld said:
Yes that looks right.
Would you mind sharing your translation when you are done?
Click to expand...
Click to collapse
Forgot to ask on this part:
Code:
cond[FCCounter] = Replace(cond[FCCounter], "/Partly Cloudy", "/PartCldy")
cond[FCCounter] = Replace(cond[FCCounter], "Partly Cloudy/", "PartCldy/")
What does the / in the "/Partly Cloudy", mean? I have noticed some entries have the / before the word, some have it after and some even have a period. Just want to make sure I translate correctly.
j101399j said:
Also how do I translate S2U2? It shows the sun (it is very sunny here right now) and it says "Sunny" on the bottom with the temp in the slider bar (still 82 degrees) Above the sun icon there is a Morgen button looking thing. What is that? and how do I change it? It looks like that is part of the slider graphics in S2U2
Click to expand...
Click to collapse
I will make an english version of the s2u2 backgrounds (Morgen is german for tomorrow).
I made that part look as it is part of the slider bu in fact it is part of the background.
- The slider text and the background image show the forecast for today.
- The icon and the text under the morgen show the forecast for tomorrow.
j101399j said:
So I restarted, presses the getweather.mscr, moved the active icon to the bottom bar, so it showed and the forcast did not cover it. YEA!!! But now it does not update. It has stayed at 82 degrees F all night and so far through today. Is it becasue I used the UI to move the icons?
Click to expand...
Click to collapse
If you moved the current weather icon with the gui it won´t update but the script will replace whatever you set in weather.ini.
Moving it to the bottom bar is not possible for now. (I will try to make an option in the next version.)
I made that icon replacing on purpose that way you only see the forecasts when needed.
So if you press on the actual weather icon it will show the forecast. When you press on one of the forecast icons it will go back to normal.
The getweather.mscr downloads the weather and stores it in the registry then it updates the current weather weather Icon (The current weather icon actually doesn´t show the current condition but the forecast for today. The caption shows the current Temp and the min and max temp for the day in the ()
If you press on the current weather Icon it runs iPhoneTodayWeather.mscr (that displays the 4 day forecast)
If you press one of the forecast icons it runs noweather.mscr (that reverts everything back to normal.
j101399j said:
And if I try to change the positions of the icons in the weather.ini file, they get all messed up.
Click to expand...
Click to collapse
Could you describe a little more detailed how everything gets messed up?
This might be a problem in the script.
Basicly the script needs icons that can be replaced. If there are no icons to replace it will create dummy icons by itself maybe i made a little mistake and it will add to many .
j101399j said:
I am trying to understand as much as possible, that way I can (with your premission) also make a walkthrough for this and add it to the iPhone Today Walkthrough
Click to expand...
Click to collapse
Cool as you can see I´m not the best in describing how to set it up
j101399j said:
What does the / in the "/Partly Cloudy", mean? I have noticed some entries have the / before the word, some have it after and some even have a period. Just want to make sure I translate correctly.
Click to expand...
Click to collapse
This is because when the weather is downloaded it is sometimes like sunny/Partly Cloudy
or Partly Cloudy/Sunny or just Partly Cloudy
So if the forecast is like the first 2 The partly cloudy needs to be shortend but if it is like the last there even needs a space to be added.
On the first lines there are AM and PM and some other prefixes striped away bacause the text would be to long.
moesfeld said:
I will make an english version of the s2u2 backgrounds (Morgen is german for tomorrow).
I made that part look as it is part of the slider bu in fact it is part of the background.
- The slider text and the background image show the forecast for today.
- The icon and the text under the morgen show the forecast for tomorrow.
[/qoute]
I have photoshop, I'll see if I can change that part as well, when I get it done I'll post it
moesfeld said:
I will make an english version of the s2u2
If you moved the current weather icon with the gui it won´t update but the script will replace whatever you set in weather.ini.
Moving it to the bottom bar is not possible for now. (I will try to make an option in the next version.)
I made that icon replacing on purpose that way you only see the forecasts when needed.
So if you press on the actual weather icon it will show the forecast. When you press on one of the forecast icons it will go back to normal.
The getweather.mscr downloads the weather and stores it in the registry then it updates the current weather weather Icon (The current weather icon actually doesn´t show the current condition but the forecast for today. The caption shows the current Temp and the min and max temp for the day in the ()
If you press on the current weather Icon it runs iPhoneTodayWeather.mscr (that displays the 4 day forecast)
If you press one of the forecast icons it runs noweather.mscr (that reverts everything back to normal.
Click to expand...
Click to collapse
That is what get messed up; or what I though was messed up. I though the forcast would be there and the actual temp. I did not know pressing the buttons changed that. I just tried that and it is perfect YEA!!!!!
moesfeld said:
I will make an english version of the s2u2
Could you describe a little more detailed how everything gets messed up?
This might be a problem in the script.
Basicly the script needs icons that can be replaced. If there are no icons to replace it will create dummy icons by itself maybe i made a little mistake and it will add to many .
Click to expand...
Click to collapse
Nope, I think the number of dummy icons are just fine.
moesfeld said:
I will make an english version of the s2u2
This is because when the weather is downloaded it is sometimes like sunny/Partly Cloudy
or Partly Cloudy/Sunny or just Partly Cloudy
So if the forecast is like the first 2 The partly cloudy needs to be shortend but if it is like the last there even needs a space to be added.
On the first lines there are AM and PM and some other prefixes striped away bacause the text would be to long.
Click to expand...
Click to collapse
Cool, I'll make an English version and send it to you, let me know after I'm done editing it.
Still trying to get the S2U2 background to work...
Click to expand...
Click to collapse
I know how to change the left softkey of the manila today screen
So e.g. If I want to change it to "contacts" (while you haven't the tab enabled)
Code:
homerskarguments contacts
homerskpath Manila://people\browserlayer\?.page
homersktext All People
This would bring you into the htc contact manager.
However, I want to let it enter the "footprints" app. So I've changed the registry into
Code:
homerskarguments footprints
homerskpath Manila://footprints\browserlayer\?.page
homersktext Footprints
This didn't work...which is too bad since the interface etc of the app looks sleek (the tab it self is another thing )
Code:
Manila://footprints.page
This one brings me to the footprints tab..not the app itself.
So I'm looking for the path and or arguments for entering the footprints app when the footprints tab itself is disabled.
Anyone who knows the answer to this mystery?
dgen said:
I know how to change the left softkey of the manila today screen
So e.g. If I want to change it to "contacts" (while you haven't the tab enabled)
Code:
homerskarguments contacts
homerskpath Manila://people\browserlayer\?.page
homersktext All People
This would bring you into the htc contact manager.
However, I want to let it enter the "footprints" app. So I've changed the registry into
Code:
homerskarguments footprints
homerskpath Manila://footprints\browserlayer\?.page
homersktext Footprints
This didn't work...which is too bad since the interface etc of the app looks sleek (the tab it self is another thing )
Code:
Manila://footprints.page
This one brings me to the footprints tab..not the app itself.
So I'm looking for the path and or arguments for entering the footprints app when the footprints tab itself is disabled.
Anyone who knows the answer to this mystery?
Click to expand...
Click to collapse
Hi there, can you advice which file do you modify that can change the sfotkey of M2.5 ? Thanks
hklm>software>htc>manila
but that's not the question here
btw..that's something that's been said over x times at xda :x
..hm..i think i'll do it the oldfashioned way...
dgen said:
hklm>software>htc>manila
but that's not the question here
btw..that's something that's been said over x times at xda :x
..hm..i think i'll do it the oldfashioned way...
Click to expand...
Click to collapse
I don't know how you can make it, but as I know there is NO possible to change the softkey of M2.5 as you mentioned above and that's why I ask how you change. Here is some thread that is discussed. FYI.
http://forum.xda-developers.com/showthread.php?t=553307