Develop Bugs

8525 Dead-End

PLEASE ASSIST: I'VE RECENTLY UPGRADED MY CINGULAR/ATT 8525 HERMES UNIT TO WINMOB6 AND NOW CAN'T GET PAST THE INITIAL WINDOWS MOBILE SCREEN WHERE IT SAYS "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE BASED DEVICE." (THE TOUCHSCREEN SEEMS TO BE DISABLED) ALSO, NOW ACTIVESYNC WILL NOT CONNECT TO THE DEVICE. I'M AT A LOSS AS TO WHAT ELSE TO DO (TRIED HARD RESET SEVERAL TIMES WITH SAME RESULT). IF SOMEONE COULD POINT ME IN THE RIGHT DIRECTION - I'D SURE APPRECIATE IT.

ETUMON said:
PLEASE ASSIST: I'VE RECENTLY UPGRADED MY CINGULAR/ATT 8525 HERMES UNIT TO WINMOB6 AND NOW CAN'T GET PAST THE INITIAL WINDOWS MOBILE SCREEN WHERE IT SAYS "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE BASED DEVICE." (THE TOUCHSCREEN SEEMS TO BE DISABLED) ALSO, NOW ACTIVESYNC WILL NOT CONNECT TO THE DEVICE. I'M AT A LOSS AS TO WHAT ELSE TO DO (TRIED HARD RESET SEVERAL TIMES WITH SAME RESULT). IF SOMEONE COULD POINT ME IN THE RIGHT DIRECTION - I'D SURE APPRECIATE IT.
Click to expand...
Click to collapse
hmm no need to scream.
Push the OK on left and power on right, and stick stylus in all at the same time. Re run the exe file while it is plugged in to active sync, and see. Which WM6 did you use?

Sorry I'm new at this. I used WM6.1. Which exe file do you want me to re-run. ActiveSync is offline....I can't get it to connect to the unit. Thanks for your assistance.

ETUMON said:
Sorry I'm new at this. I used WM6.1. Which exe file do you want me to re-run. ActiveSync is offline....I can't get it to connect to the unit. Thanks for your assistance.
Click to expand...
Click to collapse
Ok, since you're on ATT I suggest you follow my instruction above, get into tricolour screen (bootloader), and download this
from the post above you will get the shipped ATT rom. Don't worry if activesync is saying is not connected, just run the file. You will then get back to a WM6.

The phone originally came with WM5 and I was upgrading to mess around with the thing. I'm at the tricoloured screen and now downloading the files from RapidShare. Will this get me back to WM5 or to the upgrade. If there is a way, I like to try the HardSPL flash I've been reading about today - will this work on either WM version? Txs & Rgds.

ETUMON said:
The phone originally came with WM5 and I was upgrading to mess around with the thing. I'm at the tricoloured screen and now downloading the files from RapidShare. Will this get me back to WM5 or to the upgrade. If there is a way, I like to try the HardSPL flash I've been reading about today - will this work on either WM version? Txs & Rgds.
Click to expand...
Click to collapse
After you have flashed this WM6.0 you really need to flash hard SPL first, I thought you would have done that already.
Really please read this first before you brick your phone.

No that's the thing. I'm just finding out how I went about this all wrong and maybe shouldn't have been messing this in the first place. Anyhow, my bootloader screen reads like this:
HERM100
IPL-1.04
HERM100
SPL-1.40.Olipro

ETUMON said:
No that's the thing. I'm just finding out how I went about this all wrong and maybe shouldn't have been messing this in the first place. Anyhow, my bootloader screen reads like this:
HERM100
IPL-1.04
HERM100
SPL-1.40.Olipro
Click to expand...
Click to collapse
Well follow mrvanx guide, that's all I had to get on with few months ago.

Many thanks for the advice. So just to be clear I should first run the file I downloaded from RapidShare to get me back to a working WM version, then follow mrvanx guide to flash Hard SPL or viceversa...

ETUMON said:
Many thanks for the advice. So just to be clear I should first run the file I downloaded from RapidShare to get me back to a working WM version, then follow mrvanx guide to flash Hard SPL or viceversa...
Click to expand...
Click to collapse
I have not tried to hardspl a non working phone sorry so I have no experience with that. Give it a go first, and report back.

Still Stuck
zocster said:
I have not tried to hardspl a non working phone sorry so I have no experience with that. Give it a go first, and report back.
Click to expand...
Click to collapse
Nope, didn't work. Here's the report:
ERROR [260]: UPDATE ERROR
The update utility cannot connect to your PDA Phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA phone.
Check the following:
1. The PDA Phone is connected to the USB cradle/cable.
2. The USB cradle/cable is connected to the PC.
Is there another way to establish comunication with the PDA other than through ActiveSync? Somekind of emulator box or binary software???

ETUMON said:
Nope, didn't work. Here's the report:
ERROR [260]: UPDATE ERROR
The update utility cannot connect to your PDA Phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA phone.
Check the following:
1. The PDA Phone is connected to the USB cradle/cable.
2. The USB cradle/cable is connected to the PC.
Is there another way to establish comunication with the PDA other than through ActiveSync? Somekind of emulator box or binary software???
Click to expand...
Click to collapse
hmm weird, so have you got .net framework installed on your PC? try it again one more time while in bootloader, plug the phone to USB as long as you can hear the 'ding' sound you should be OK. I have 'bricked' my phone a few times and this always work. What are you trying to flash? the hardspl or the ROM?

Yes, today I upgraded to .net framework 3.5 when ActiveSync failed Microsoft Error took me to their website and offered me the option. I had been running 2.x .net framework and never had a problem would also use same ActiveSync with my old Axim X30.
Yes, I can hear the 'ding' sound and I was trying to run the file RUUWrapper.exe (Hermes ROM Upgrade w/ the option Force using SSPL).

well that shows the other way around doesn't work, so you need to get your phone to a working WM6 state, how is your download going from rapidshare? get it to boot loader mode again and flash that exe file.

Just completed that route - I ran the PDA Phone ROM Update Utility 3.12.3.7 - the process took about 10 minutes to go through 100%, then it restarted and stayed at the Window Mobile screen for little over minute (crossing my fingers), but then just showed the same message "Tap the screen to set up your Window Mobile based device." Please let me know if you have other avenues to try – It’s close to 4am here in Miami, but I'm not sleeping. I’m really glad you are able to assist with this mess – thanks a lot!

ETUMON said:
Just completed that route - I ran the PDA Phone ROM Update Utility 3.12.3.7 - the process took about 10 minutes to go through 100%, then it restarted and stayed at the Window Mobile screen for little over minute (crossing my fingers), but then just showed the same message "Tap the screen to set up your Window Mobile based device." Please let me know if you have other avenues to try – It’s close to 4am here in Miami, but I'm not sleeping. I’m really glad you are able to assist with this mess – thanks a lot!
Click to expand...
Click to collapse
so did you follow it through? and it didn't fix it? you have some bad blocks?
Unfortunately, you need to have some sleep, and read these when you wake up
http://forum.xda-developers.com/showthread.php?t=296722
http://forum.xda-developers.com/showthread.php?t=369434

zocster said:
so did you follow it through? and it didn't fix it? you have some bad blocks?
Unfortunately, you need to have some sleep, and read these when you wake up
http://forum.xda-developers.com/showthread.php?t=296722
http://forum.xda-developers.com/showthread.php?t=369434
Click to expand...
Click to collapse
what does bad blocks mean?
Okay, looks like I've got a Type 2c Brick Situation in my hands.... I think I will take your advice and get some rest and tackle this again later on. I really appreciate your assistance - will you be around again later?

Okay good day, I'm back on the trail. Found shipped ROM on WIKI for HERMES in the following thread - http://forum.xda-developers.com/showthread.php?t=277664
Downloading now...According to pof(moderator) it's a "new rom from the still unreleased Cingular 8525: HTC Hermes (HERM100) branded from U.S. Operator Cingular"
My only question then would be that this appears to be made for WM5 and I performed the WM6 upgrade which is what got me into this mess in the first place - so will there be any conflicts or issues I should now about? I'm about to go ahead with it - if anyone is out there and thinks otherwise, please advise soonest. Thx & rgds, Ed

ETUMON said:
Okay good day, I'm back on the trail. Found shipped ROM on WIKI for HERMES in the following thread - http://forum.xda-developers.com/showthread.php?t=277664
Downloading now...According to pof(moderator) it's a "new rom from the still unreleased Cingular 8525: HTC Hermes (HERM100) branded from U.S. Operator Cingular"
My only question then would be that this appears to be made for WM5 and I performed the WM6 upgrade which is what got me into this mess in the first place - so will there be any conflicts or issues I should now about? I'm about to go ahead with it - if anyone is out there and thinks otherwise, please advise soonest. Thx & rgds, Ed
Click to expand...
Click to collapse
Sounds good man!! Flash it!! oem WM6 roms usually fix allot of issues.. Don't be scared everyone else is busy flashing WM6.1 roms all the time now!

Thanks for the words of support <joshkoss>! Just attempted several times to flash the Shipped ROM I found from <pof> (PDA Phone ROM Update Utility - R:31300 D:51000 U:31101 P:0) and keep getting ‘ERROR[260]: UPDATE ERROR’ message. While instead I went back again to flashing the ROM that <zocster> suggested last night (PDA Phone ROM Update Utility 3.12.3.7) and it does go through the entire 10 minute process until it shows 100% completion both on the PDA and on the PC and then tells me congratulations….etc. I even flashed it twice back-to-back as I read to do in one of the threads – but just keep getting back to the dreaded Window Mobile screen with the same message "Tap the screen to set up your Window Mobile based device."
My next question is this: Why does the PDA Phone ROM Update Utility 3.12.3.7 connect to the PDA, but the PDA Phone ROM Update Utility - R:31300 D:51000 U:31101 P:0 (which I read is the Shipped ROM that I need to get the PDA back to) gives me an error message. Obviously, there is a connection since I’m able to get a 100% completion on the other ROM??? Please kindly advise…..

HTC S620 updating issue...

Hi,
I've searched over this forum and cant find an answer to what I need so I figured I would post.
I have a HTC S620 (sim free) and it has WM5 on. I would like to upgrade to WM6. (not 6.1 yet.) I have looked over this forum and found lots of stuff on how to do it and I have tried 2 different ROMs and also watched the you tube video.
When I use the official wm6 ROM, (even before I have tried to install the ROM) my phone gets to the white screen stage and then disconnects which means the ROM installer doesnt work because the phone isn't connected.
I have also tried to isntall the kavana 6.1 version and the ROM installer comes up with an error code which says the model isnt compatiable.
The wm6 official upgrade looks more promising if any one has any solutions? although any solutions would be very welcome.
thanks
James.

jameskelsall said:
Hi,
I've searched over this forum and cant find an answer to what I need so I figured I would post.
I have a HTC S620 (sim free) and it has WM5 on. I would like to upgrade to WM6. (not 6.1 yet.) I have looked over this forum and found lots of stuff on how to do it and I have tried 2 different ROMs and also watched the you tube video.
When I use the official wm6 ROM, (even before I have tried to install the ROM) my phone gets to the white screen stage and then disconnects which means the ROM installer doesnt work because the phone isn't connected.
I have also tried to isntall the kavana 6.1 version and the ROM installer comes up with an error code which says the model isnt compatiable.
The wm6 official upgrade looks more promising if any one has any solutions? although any solutions would be very welcome.
thanks
James.
Click to expand...
Click to collapse
James,
How long have you had BT Anywhere as they have all been WM6 since over a year ago? Should bare any difference anyway, the phone will stop active sync when it goes white anyway.
You should be able to upgrade to WM6.1 without any hitches with following the "Upgrade to WM6.1" you should do this before hand http://forum.xda-developers.com/showpost.php?p=2807194&postcount=485 if getting error message "mind you may help if know what the message is?"

Hi cheers for the reply. It's not a BT one, its actually a second hand one off ebay so I assume its pretty old. Its just branded as HTC...

jameskelsall said:
Hi cheers for the reply. It's not a BT one, its actually a second hand one off ebay so I assume its pretty old. Its just branded as HTC...
Click to expand...
Click to collapse
Wow i must have been reading something totally different to posted lol
Still go with previous post to flash WM6.1 if you want to upgrade to WM6 you need to know what the original carrier of the phone is does it have a carrier plas on load?
Mind you i'd flash to WM6.1 if i was you as it's an advancemet far greater than WM5 to WM6

Hi again,
I've just tried the kavana 6.1 ROM following all the instructions you've said. It got as far as the white screen (through the DOS programme) and then it lost its USB connection which means the ROM installer wouldnt work as it couldnt find a connection. I'm running windows vista.
thanks

jameskelsall said:
Hi again,
I've just tried the kavana 6.1 ROM following all the instructions you've said. It got as far as the white screen (through the DOS programme) and then it lost its USB connection which means the ROM installer wouldnt work as it couldnt find a connection. I'm running windows vista.
thanks
Click to expand...
Click to collapse
When the whitescreen launches WMDC will stop sync and the computer takes over via it's own driver, did you leave it there with the white screen or just disconnect Dash when WMDC disconected?

ive yet to change a rom on vista because of the lack of ativesync which is really dumb

stylez said:
When the whitescreen launches WMDC will stop sync and the computer takes over via it's own driver, did you leave it there with the white screen or just disconnect Dash when WMDC disconected?
Click to expand...
Click to collapse
I left it there with the white screen, didnt touch any USB connections or anything. When I did this, the windows sound sounded (as in when something is disconnected) and the green light went off on the phone and the ROM installer wouldnt run because it says the phone is disconnected...Cheers for your help btw
James.

Isn't there a center key press on the d-pad in there somewhere? Are you doing that?

Hi guys, I've managed to resolve the issue and im all sorted now. Just used a different USB port. Thanks for your help

[I780] Problems after flashing (bricked?) need official roms help plz

Hi guys,
i flashed my i780 with the heroes 6.1 rom. after 1 day of perfect functionality i couldnt unlock it because the touch screen didn`t respond anymore. then after some time i managed to unlock it, but it seemed the ui crashed, so i had to reboot. after boot all data were gone like just after a hard reset. i tried plenty other roms but it`s everytime the same. after some time the phone crash and i need to reflash it. so i think that my phone is damaged someway. i still got warrenty, but i don`t have the original roms anymore. do anyone know, where i can download the original samsung wm 6.0 roms (german)? i also need the original phone rom so i can send the phone to samsung. thanks in advance

ouch! That'll be hard to find!
What you could do is order a new i780....and anyway you have a 7 day return and money back option....do a rom dump and send it back

shockabuku said:
Hi guys,
i flashed my i780 with the heroes 6.1 rom. after 1 day of perfect functionality i couldnt unlock it because the touch screen dind`t respond anymore. then after some time i managed to unlock it, but it seemed the ui crashed, so i had to reboot. after boot all data were gone like just after a hard reset. i tried plenty other roms but it`s everytime the same. after some time the phone crash and i need to reflash it. so i think that my phone is damaged someway. i still got warrenty, but i don`t have the original roms anymore. do anyone know, where i can download the original samsung wm 6.0 roms (german)? i also need the original phone rom so i can send the phone to samsung. thanks in advance
Click to expand...
Click to collapse
take a look here --> http://forum.xda-developers.com/showthread.php?t=398874

thx a lot,
once again i tried the heroes 6.1 rom but this time without syncing my phone to my pc. `til know everything works. maybe my activesync is the problem. i try the latest usb driver from samsung. i hope it work

shockabuku said:
thx a lot,
once again i tried the heroes 6.1 rom but this time without syncing my phone to my pc. `til know everything works. maybe my activesync is the problem. i try the latest usb driver from samsung. i hope it work
Click to expand...
Click to collapse
delete the actual activesync and reboot your pc, download the latest version of activesync (4.5) from samsung official site and delete the old connection. reinstall the sw and try again.
Bye

gianvi60 said:
delete the actual activesync and reboot your pc, download the latest version of activesync (4.5) from samsung official site and delete the old connection. reinstall the sw and try again.
Bye
Click to expand...
Click to collapse
hello ... i flash my phone, he got stuck at 13% , after that the phone is stuck at loading windows page, i tried anothers roms but nothing, pls can u help me ? i think i need a official rom or something like that... pls help me, pls teach me

Samsung Office WM 6.1
This is office Samsung I780 Windows Mobile 6.1 upgrade.
http://www.samsungmobile.com/support/i780/index.jsp
you can has a try.

towseng said:
This is office Samsung I780 Windows Mobile 6.1 upgrade.
http://www.samsungmobile.com/support/i780/index.jsp
you can has a try.
Click to expand...
Click to collapse
1. i can`t find the SGH-i780 Updater, when i press the "firmware download" button i go to webside and there is nothing, i can`t find updates.
2. my activesync cannot see the phone so i can`t use a .exe update... just mirage see the phone when is in emergency mode...

Please Help -HARSPL

Please save sarcasm when responding. I have been reading and would onlt ask for help a last option.
My phone - HTC Pro 2 (I bought it from a authorized t-mobile store)
Need help with - ugrading it to 6.5 or any cooked version that will work
History - my phone is already unlocked as I had unlock kings do it. I tested it and I can put any sim it and it works fine.
Problem - every time I try and install a new rom on it I get one the follwing errors or issues: My usb connection stop when the install starts and the process times out, or I get a host of errors messeges from invild device to wrong version.
I need very simple instructions on what I need to do upgrade my os and then later migrate to some of the really roms I have seen on this site.
Please help.

Did you hardSPL? If not go here: HardSPL

Nothing
I DL'ed the fle and followed directions (auto option). Nothing happened.

bigdaddy67 said:
I DL'ed the fle and followed directions (auto option). Nothing happened.
Click to expand...
Click to collapse
When you read those 11 steps in the HSPL thread, where is it, where you say: nothing happends?

As it stands, you will only be able to install an official T-Mobile ROM if it is a T-Mobile-branded phone.
So installing HardSPL will let you flash whatever ROM you want, any of the official ones (including, say, HTC official 6.5), or one of the fine cooked ones from this forum.
If you are having trouble with HardSPL, you really need to post on that in the HardSPL sticky.

no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.

@bigdaddy67
This sounds like a USB issue, try this:
1. Power off your TP2
2. Press and HOLD the volume down button, press and HOLD power button until you see the multi-coloured screen (bootloader mode)
3. Connect your TP2 to your computer via USB
4. You should now see the letters USB at the bottom of the TP2 screen
5. If you DO, run hardSPL
If you DON'T, try a different USB cable and/or port on your computer.
If none of the above helps, take a screen shot of your bootloader screen and post it.
How to get a screenshot:
1. Go to http://www.mymobiler.com and download/install the software.
2. Open it and take a screen shot
3. Post it here.
We are here to help, but need some additional details!!!
Russ

bigdaddy67 said:
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
Click to expand...
Click to collapse
normally I would tell you to go search but you seem to be in a pickle so here...
Russ

bigdaddy67 said:
Please save sarcasm when responding. I have been reading and would onlt ask for help a last option.
My phone - HTC Pro 2 (I bought it from a authorized t-mobile store)
Need help with - ugrading it to 6.5 or any cooked version that will work
History - my phone is already unlocked as I had unlock kings do it. I tested it and I can put any sim it and it works fine.
Problem - every time I try and install a new rom on it I get one the follwing errors or issues: My usb connection stop when the install starts and the process times out, or I get a host of errors messeges from invild device to wrong version.
I need very simple instructions on what I need to do upgrade my os and then later migrate to some of the really roms I have seen on this site.
Please help.
Click to expand...
Click to collapse
Welcome to forums
Hope this guide help you:
http://forum.xda-developers.com/showthread.php?t=550540
And don´t forget to vote!

bigdaddy67 said:
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
Click to expand...
Click to collapse
Also, which OS are you running on your PC? If its Windows XP, make sure you download Active Sync and install/run it. If you run Vista / 7, make sure you run the Mobile Device Center.

moved you're thread out of rom dev section, best of luck sir.

Update -
My OS is win xp and copied and installed the cab on my device. then I re-powered hold down the volume and got that tri-color screen with the usb connected. Started the HardSP app and have been waiting for 15 minutes as nothing seems to be working.
Did I miss something?

Got error 262
Ok I finally got an 262 error. I am not what I missed. Dl'ed the cab re-powered holding down vol key started HardSp app.
Help.

Stil need help
I am at home and my pc is vista. Can someone pls help get over this hurdle?
Please Please Please

[TOOL] Task 29 (format internal Memory) without drivers, without mtty-It's about time

Hi all, for all the people like me who do not have the patience or knowledge do adventure themselves in the mitty thread.
This program already exists for X1, HD2, TP2 (for what I know) and I have tested it and it works.
After some search on this forum I have talked to agent_47, who was kind enough to make a task29 program for our HTC Diamonds (GSM version).
Agent_47 or me do not take any responsibility for ay damage done to your device. Use it at your own risk, and only after you have HSPL already installed on your device.
Do not know what a HSPL is, check here:
http://forum.xda-developers.com/showthread.php?t=415191
agent_47 said:
it will flash radio 1.09.25.23
replace the radio if u want to use other version
Click to expand...
Click to collapse
agent_47 said:
now we can mtty our "HTC Diamond" without having the need of MTTY and its drivers
INSTRUCTIONS:
- download and unzip
- run then ROMUpdateUtility.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM
DOWNLOAD:
http://rs604.rapidshare.com/files/407049148/task29-diamond.7z
WHATS TASK29\MTTY
when u flash a rom, you are copying files onto the internal memory (like duh!) but if u repeatadly flash different roms, sometimes files from older version stays behind as when u flash a rom, you just copy and sometimes overwrite files without deleting the older ones. hence at times these older files may create bugs\instability. hardrest donot always fix it.so we use MTTY
but the thing is, mtty is and can be hard to use for new users. ... for me,, i was having the worst time installin the drivers needed to run mtty on win7 x64. so u i made this tool for me and for all
CREDIT:
all credit goes to doloop for coming up with the idea
Click to expand...
Click to collapse
and I would add to agent_47, as he adapted this tool for the HTC Diamond

Did anyone tried this?
What's the verdict?

mmm. interesting.

Thanks for the share and all your hard work but this is actually harder than mitty for me and i am a windows 7 user also

wapvirus said:
Thanks for the share and all your hard work but this is actually harder than mitty for me and i am a windows 7 user also
Click to expand...
Click to collapse
I do not understand how this is possible, I am using Vista and this is as easy as flashing a ROM with a computer. You just connect the device via USB to the Diamond, let active sync finish. Then you just need to run "ROMUpdateUtility.exe" and follow the instructions.
I have tested this, and I can confirm this is working for the European HTC Diamond (bought in Portugal).
This was not made by me, but I do think that more people will benefit with this program. Hopefully people will overcome the initial resistance to change.

Great idea!
I used to MTTY through VMWare Windows XP x86 within my host Windows 7 x64. It was a pain in the ass to get though but it always worked for me. This is a great time saver!
Regards to both of you Johev and agent_47!
Willing to test on my next flash.
Best regards,
Cina.

INSTRUCTIONS:
- take our batti and then flash a rom using mSD cardor by taking device into bootloader and using customRUU to load ur favorite ROM
Click to expand...
Click to collapse
What do you mean? take out battery?
Gonna try this with my next flash

Yeah, the sentence is a bit odd to me to
i asume it means take out battery but still..
i'm not gonna try it until i know it for sure!
--edit--
i couldn't help it and used it anyway..
i assumed "take our batti" means take out battery cuz it worked for me!
my diamond was clean (i guess) and i'm now enjoying a new rom!
Thanx guys!!

I would never post something that I did not test first.
I am glad that you liked it, and I really think it is much simpler then the mitty thread.
Good luck flashing.

rapidshare
first would like to give thanks for sharing this one but some people cannot use rapidshare links and unluckily I am those few
can you give alternative link like mediafire ????

character said:
first would like to give thanks for sharing this one but some people cannot use rapidshare links and unluckily I am those few
can you give alternative link like mediafire ????
Click to expand...
Click to collapse
http://www.mediafire.com/?jabdu2n968xa9uk here you are

I LOVE THIS TOOL
this isn't good for my ORD.. i'm flashing the hell out of my diamond now!
Getting a HD2 in about a month.. can't wait for it ;D

I tried it, but I only get the start screen with "Touch diamond", no bootloader.
But I´ve installed HARDSPL Olinex, because I already flashed other ROM´s.
How can I solve this problem?
What about battery? When I have to get it out, when I can put it in again...?
fibula

to get into bootloader you have to reset your device while holding the volume down button!
then you will get the tri-color screen,
connect your diamond to your pc and flash a rom with a RUU!

fibula said:
I tried it, but I only get the start screen with "Touch diamond", no bootloader.
But I´ve installed HARDSPL Olinex, because I already flashed other ROM´s.
How can I solve this problem?
What about battery? When I have to get it out, when I can put it in again...?
fibula
Click to expand...
Click to collapse
To get into bootloader with my diamond:
1) Turn Diamond off, take out battery for 5 seconds.
2) Put battery back inside, and press and hold the centre button (circle) and turn ON the device (hold both buttons) until you see a 3 colour screen
If step 2 does not work, try pressing holding volume down while turning the device on (hold the ON button too). Remember to take out the battery before you do this.
Hope this helps.

Hi!
Does this work by simply copying any ROM's nbh file (instead of radio*.nbg) to folder and executing ROMUpdateUtility.exe? Will it MTTY before flashing the ROM?
Currently I'm trying this method out. It is around at 50% of flashing progress.
I'll report back.
Cina.

thanks a ton dude.... magnificent work...

Now if there were only a way to do it directly from Internal Storage, without RUU...

It does not work the way I described. It hangs on HTC Diamond black boot screen and no red lines appears in lower right corner (no OS recognized).
So you have to flash 2 times. Radio flash is shorted for the first attempt and on the second turn you flash your ROM with CustomRUU.
There is a similiar tool like this with the method working with other devices I described above. FlashaholicRUU. Someone give it a try for Diamond. Next week I'll do it and report back.
Cheers,
Cina.

cina said:
It does not work the way I described. It hangs on HTC Diamond black boot screen and no red lines appears in lower right corner (no OS recognized).
So you have to flash 2 times. Radio flash is shorted for the first attempt and on the second turn you flash your ROM with CustomRUU.
There is a similiar tool like this with the method working with other devices I described above. FlashaholicRUU. Someone give it a try for Diamond. Next week I'll do it and report back.
Cheers,
Cina.
Click to expand...
Click to collapse
I remember to see that post on xda developers front page short time ago, but I was not sure if it would work for HTC Diamond.
A universal task29 that would format and flash the device in one single process.
Ironically it was developed a few weeks after I have found an alternative way to mitty that I posted here.
So far I did not hear that it was compatible with Diamond, so I will not risk it.
It's nice to have all these options, because when I searched for something like this a few months ago, I could only find the mitty threat that has more than 80 posts.
For me it was strange as newer devices with very similar hardware and software already had something like this, but Diamond users had to use mitty.
Well I am glad that you like it, and hopefully I helped someone that was not able or willing to do it manually.