Dear helper,
I have my HTC Touch Pro2, but the front screen is loss now, that means the touch-part does not work anymore, but there is a lock on it (slide it and then enter a code), is there a way to get around the slide part to get my documents and contacts, because the repair-center can't help me get those personal contacts back, like a command sent trough the usb? or to get into the system without the code?
yours sincerely,
Kevin van Hoorn
djquim said:
Dear helper,
I have my HTC Touch Pro2, but the front screen is loss now, that means the touch-part does not work anymore, but there is a lock on it (slide it and then enter a code), is there a way to get around the slide part to get my documents and contacts, because the repair-center can't help me get those personal contacts back, like a command sent trough the usb? or to get into the system without the code?
yours sincerely,
Kevin van Hoorn
Click to expand...
Click to collapse
not sure about the sliding it to unlock as I never use that feature... but you can type in your code with your slide out keyboard.
I just enabled my lock screen to text and as soon as I slid out my keyboard the lock screen went away. Granted I don't have a pin set though.
Aaron McCarthy said:
not sure about the sliding it to unlock as I never use that feature... but you can type in your code with your slide out keyboard.
I just enabled my lock screen to text and as soon as I slid out my keyboard the lock screen went away. Granted I don't have a pin set though.
Click to expand...
Click to collapse
i know about the digits (numbers) but first i need the slider to go away
bye bye contacts
Try and install this
http://www.mymobiler.com/
If you can get it to install then you can control your phone on your pc’s screen.
yes my mobiler would help but only if you have sdkcerts installed to avoid the touchscreen question of yes to install a unkown program.
could use the arrow keys on the keyboard to move to yes, then press enter to confirm.
Related
OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
hi, I have a quick question. If my phone is locked and someone call me, is there way that I can have the keypad working when I pick the phone call without unlocking the screen? I did a quick search and could not find such option.
You can try this program. It will let you remap your keys, it's worth a shot.
http://forum.xda-developers.com/showthread.php?t=554240
If you install one of the many third-party screen Lock programs most of them will give you this function. I'm currently running the trial version of PocketShield and would recommend you give that a go.
E-Mail and Lock
When I lock my Tilt 2 I still get my phone calls through my Bluetooth. I can even see who is calling on the phone. But I cannot get any e-mails when the phone keyboard is locked. I have my phone in a belt case all the time being I am out and about in the construction site I am running.
Is there any way to get the e-mails while the keyboard is locked?
My touch screen won't respond to touch or the stylist. This just happened but I am beginning to see some bleed on the screen so I know it's a hardware issue.
Got a new one coming to replace it but here's my problem. My settings are set to automatically lock the screen after a period of time for security reasons and to help prevent pocket calls! Does anyone know a work around with the keyboard to unlock the screen?
Most of the software I loaded is on my PC but whenever I rebuild a phone it's always good to look at what is in the thing via "remove program" option. Needless to say, I can't get there without unlocking the screen.
I tried my magic wand and threatened the phone by telling it I was going to replace it with an iPhone but so far... nothing works.
Thanks,
Rick
The lockscreens are based on touch input. The only option I know of to recover your data is to replace the digitizer.
AFAIK, doing that on Windows Mobile 6.5 Stock is completely impossible. If you can get past the slider screen, you can use the numbers on your TP2 keypad and press enter. But I'm running 6.1 (makes me feel better being used to ye olde Pocket PCs), so I can't verify anything.
When my phone is unlocked and I access any entry in the notification pulldown screen (e.g., weather, email, USB connected......anything), I am taken to the lock screen and required to re-input my unlock pattern (or facial recognition). Since the phone is obviously unlocked when I tap on notification area, this seems like it may be a bug. Why return to the lock screen when the phone is already unlocked?
Is anybody else experiencing this behavior?
Merk
Merk07 said:
When my phone is unlocked and I access any entry in the notification pulldown screen (e.g., weather, email, USB connected......anything), I am taken to the lock screen and required to re-input my unlock pattern (or facial recognition). Since the phone is obviously unlocked when I tap on notification area, this seems like it may be a bug. Why return to the lock screen when the phone is already unlocked?
Is anybody else experiencing this behavior?
Merk
Click to expand...
Click to collapse
Mine did something like that for a little while....i'd just installed golocker but didn't have it set as the correct default I think.
Thanks for your response, Rocket_Science, but since I do not use the GO Launcher EX, I don't think the GO Locker will work on my phone. And I have no desire to install the GO Launcher. Still looking for a fix . . . .
I am going to bump this back up in the hope that some kind soul (who uses a password or gesture protected lock screen) will test their OG and let me know if they experience similar behavior: with your phone unlocked, access the notification pull down and tap on any item (weather, email, etc.). Are you taken to the item or do you return to the lock screen? I always get take to the lock screen and need to re-input my password to get access to the device.
Many thanks.
Merk
Merk07 said:
I am going to bump this back up in the hope that some kind soul (who uses a password or gesture protected lock screen) will test their OG and let me know if they experience similar behavior: with your phone unlocked, access the notification pull down and tap on any item (weather, email, etc.). Are you taken to the item or do you return to the lock screen? I always get take to the lock screen and need to re-input my password to get access to the device.
Many thanks.
Merk
Click to expand...
Click to collapse
This seems to be a known issue with Android 4.x when using an application that disables the lock screen for you. I use Llama, and I have it disable the lock screen automatically after it successfully connects to my home wifi. If I click on anything in the Notification area, the lock screen will appear and come up every time thereafter. As long as I don't click on any Notifications, it will not re-lock itself.
This happened to me on my HTC Evo 3D as well, so I thought it was a bug with Llama, but I saw the same issue mentioned with another application that performs a similar action.
This is probably something that would have to be reported to Google.
Verizon Pixel 2....so not unlocked bootloader/root.
Someone stole my wife's phone, smashed it up, and dumped it on the side of the road. Able to find it with locate my phone. Can't unlock it because battery died and she used fingerprint unlock, so trying to find a way so we can recover pics of the kiddos at baseball. It is responding, I can feel it vibrate when trying to unlock with fingerprint....but since it was restarted it is requiring her pin code. Any ideas?
Here's the damage...
GunnerOnASpooky said:
Verizon Pixel 2....so not unlocked bootloader/root.
Someone stole my wife's phone, smashed it up, and dumped it on the side of the road. Able to find it with locate my phone. Can't unlock it because battery died and she used fingerprint unlock, so trying to find a way so we can recover pics of the kiddos at baseball. It is responding, I can feel it vibrate when trying to unlock with fingerprint....but since it was restarted it is requiring her pin code. Any ideas?
Click to expand...
Click to collapse
if it is locked with a pin you have a chance if a pattern you are out of luck.
here is where to start
get your otg adapter from the box plug in a keyboard.
try to unlock with fingerprint
enter pin on keyboard
if it works from there i will tell you key combos to do what you want
It is locked by pin, but I don't have a keyboard. I'll see if I can find one in the next few days here to give it a shot
GunnerOnASpooky said:
It is locked by pin, but I don't have a keyboard. I'll see if I can find one in the next few days here to give it a shot
Click to expand...
Click to collapse
a keyboard mouse combo like this could be useful https://www.amazon.com/dp/B014EUQOGK/ref=nav_timeline_asin?_encoding=UTF8&psc=1
i just tested with it the old version of it
google has made this alot harder compared to when the app drawer had a button but im able to get to settings and open apps idk what you want to from there usb debugging maybe idk
also google play has a feature to remote install apps in you are on the same google account if you know a good screen mirroring app or similar
billycar11 said:
a keyboard mouse combo like this could be useful https://www.amazon.com/dp/B014EUQOGK/ref=nav_timeline_asin?_encoding=UTF8&psc=1
i just tested with it the old version of it
google has made this alot harder compared to when the app drawer had a button but im able to get to settings and open apps idk what you want to from there usb debugging maybe idk
also google play has a feature to remote install apps in you are on the same google account if you know a good screen mirroring app or similar
Click to expand...
Click to collapse
Thanks for all the info. She has a tablet with the same account on it, so I'll see if I can get it to install a screen mirroring app.
Ok, got a keyboard/mouse combo on the way. I shouldn't need much, besides getting it to unlock to be able to pull what I need...but just in case if you know the shortcuts to get to USB debugging, or even better, to get to screen casting, and could post them, that would be awesome.
GunnerOnASpooky said:
Ok, got a keyboard/mouse combo on the way. I shouldn't need much, besides getting it to unlock to be able to pull what I need...but just in case if you know the shortcuts to get to USB debugging, or even better, to get to screen casting, and could post them, that would be awesome.
Click to expand...
Click to collapse
1. try to unlock with fingerprint this brings up enter pin screen
2.enter pin on keyboard an hit enter should here unlock sound if speakers work
3.spam down on the arrow keys
4. rotate phone to landscape mode if you have it disabled this still works but very inconstant
5. this must be done quickly hit the windows key then right, right, left 7 times, right, enter <this is very inconsistent because google is dumb in portrait mode
6.right , enter
7.type : open settings , enter
8.down 13 times, enter
9. down 4, enter
10.down 2, enter
11.down 13, enter
12.left, right, enter usb debugging will be enabled if you have developer options enabled i hope you do other wise i need to re do this
please quote me so i get a notification