Develop Bugs

Having Problems with artemis touch 3.01, Help??

Hi im having small problems with artemis touch 3.01 and not getting any help within the thread itself hope someone can help out here ..
now using touch 3.01 is there anyway to get rid of the o2 screen in setting or do i need to use the splash screen program?
Also why does it say 247mhz on boot up instaed of 201mhz?
Also voice dialling not working says something about no trained voices any ideas?

DazSH said:
Hi im having small problems with artemis touch 3.01 and not getting any help within the thread itself hope someone can help out here ..
now using touch 3.01 is there anyway to get rid of the o2 screen in setting or do i need to use the splash screen program?
Also why does it say 247mhz on boot up instaed of 201mhz?
Also voice dialling not working says something about no trained voices any ideas?
Click to expand...
Click to collapse
I think you must use the splash screen program.
The ROM uses Battery status - overclocking to 247MHz.
My voice dialling is working perfectly..

Cheers no way of auto starting it at 201mhz then? also hard reset sorted the voice out now working ..
thx for your reply m8

on the today screen, if you tap continously to batt status indicator, you can see the settings. on the omap tab, you can select if you want to overclock on wakeup, on reboot, etc...

cheers done and sorted amazing how things are sometimes just under your nose.

[LG KS20] A common issue...

Hi everyone,
I've bought an LG KS20 few weeks ago, and I've found it had important problem. In fact, it seems that I'm not the only one to have noticed this problem (French forum here).
Details :
During a phone conversation, the screen always shut off (so that you don't click on it with your cheek), and generally the microphone also turns to MUTE MODE. In fact, I can perfectly listen to my friend, but he can't anymore!! I have to move the joystick, or click somewhere to EVENTUALLY fix the problem.
This issue randomly comes up during a conversation.
Some people says they brought their phone to the seller, sent it for repairing, but got it back with the same problem.
The request :
Are there some phone genius that could have a look on it? Is XDA Community more able than LG Electronics for upgrading ROM ?
Thank you very much for your services.

i have same this problem

Well, I don't have a LG KS20 but I have a HTC Kaiser. Both phones are a bit similar, even having the same chipset. Kaiser did have this "feature" of turning of the screen during a call, but that would not mute the mic.
If you are brave, check it and see if there are registry keys like this:
HKCU\ControlPanel\Phone\Sleep
HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall
Try disabling them, setting their value to zero. Hopefully your device will not sleep while you're talking.
I took this from KaiserTweaks, maybe it works for your phone too. And be careful not to mess up with anything else on your registry .

jym04 said:
Well, I don't have a LG KS20 but I have a HTC Kaiser. Both phones are a bit similar, even having the same chipset. Kaiser did have this "feature" of turning of the screen during a call, but that would not mute the mic.
If you are brave, check it and see if there are registry keys like this:
HKCU\ControlPanel\Phone\Sleep
HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall
Try disabling them, setting their value to zero. Hopefully your device will not sleep while you're talking.
I took this from KaiserTweaks, maybe it works for your phone too. And be careful not to mess up with anything else on your registry .
Click to expand...
Click to collapse
I don't have this key

Build it
with PHM RegEditor or SK Tools.
gregdu13250 said:
I don't have this key
Click to expand...
Click to collapse

I"m using this !

Hello greg, i can't create the second rules in my regirty ?
How do you do please?
Thanks

No finally i've create the registry rules but nothing: there is alwayse the same probleme during the conversation!
The micro look like to turn off ....

Up!
Some news about this problem?
thks

I think that we have to keep our phone busy.
Try to run the media player in the background with a file continuously

Any news guys;;;;;;;;;;;;;;;;;

Touch Pro 2 Call volume

Hi.
I am having a problem with calls on my gsm TP2. It started about an hour ago when I call someone they cant here me but i can here them fine. I think its the mike but idk. I havent dropped it recently so could it be software or is there a tweak to make the mic more sensitive. I am open to suggestions. Thanks in advance.

cfcoleman said:
Hi.
I am having a problem with calls on my gsm TP2. It started about an hour ago when I call someone they cant here me but i can here them fine. I think its the mike but idk. I havent dropped it recently so could it be software or is there a tweak to make the mic more sensitive. I am open to suggestions. Thanks in advance.
Click to expand...
Click to collapse
If by any chance you used Hd tweaks or instaled a audiopara3 file to make volume higher it will happen that. Just restore to origimal settings on hd tweak or uninstall the audiopara3 file that you installed.
Hope it helps

I dont have any of those installed. I hard reset my phone. Put two new radios on. Flashed the original wwe wm6.5 rom and its still the same. If i slide open the phone or hit the phone u can hear that through the other line but its not picking up my voice.
Ok. Now i have to yell into the phone for the person to hear me. Does anyone know the registry hack to increase mic sensitivity?????

NO SOUND, NEED TO RESET ALWAYS!!!!! Help Please

Hello,
I have been using Touch Pro 2 from last 7 months. Around 4 moths back i upgraded to Win 6.5. After that i am facing a particular problem. Sometimes i get an error of "Device.exe" and then all the sound from the phone is mute.It doesnt play any sound and even if i answer/make a call, i cannot hear the other party's sound or even when their phone is ringing. There is only vibration. I tried using it with headset, and there is absolutely no sound. After resarting the phone everything is fine. But the error appears the very next day or the day after that, and i just restart the phone. I tried Hard Reset and installing the official ROM from HTC website, still the problem persists. The only software i installed after replacing the ROM were NetCF3.5 & Advanced Configuration Tool v3.3 only. I highly doubt if it causes this problem as i was using it in Win6.1 when i bought the device.
The people at HTC downgraded my device to Win 6.1 and asked me to use it for a week and see if the error comes. I am using it for almost week, and the problem is not there.
Can someone suggest what the problem could be, as i dont like 6.1 as i am now used to 6.5. I dont think HTC will be able to help me soon. Someone please help me in this case.
REGARDS.

Hi, I had a similiar issue with my tilt 2 that I finally figured out was linked to advanced config tools. Specifically the changes I made in the sounds settings. For some reason this muted my microphone and speaker. After changing back those settings to default the problem was resolved. I am running 6.5 on my phone. Hopefully this helps you out.

ehaas13 said:
Hi, I had a similiar issue with my tilt 2 that I finally figured out was linked to advanced config tools. Specifically the changes I made in the sounds settings. For some reason this muted my microphone and speaker. After changing back those settings to default the problem was resolved. I am running 6.5 on my phone. Hopefully this helps you out.
Click to expand...
Click to collapse
YOU ARE RIGHT buddy... i was doubting on Advanced Config only..... but i did not made any changes to he sound, i use it for unthreaded messages only...but this time i did not install it, i got the unthreaded sms patch from HTC and installed it, and till now i did not face the same problem, it almost 3 complete days of my usage.....
now i am sure Advnced config is the culprit....
Few more people are having the same problem in my country(UAE) and have complained at HTC, i shall inform them about this...or lets wait for another 3 days to make sure that this problem does not occour.
THANKS A LOT

I had some similar problems with the advanced config running the stock rom with the att tilt2. I've since banished that program from my phone.

[Q] After update micrphone weak..?

Hi, after a clean install my mic turns out very weak.. I can hear the other side.. but the others don't hear me or very very weak.. another clean install doesn 't solve the problem
Are there some mic settings in the Touch Pro 2 for adjusting mic levels or is there a tweak, app.. HELP!!
greetss Mike

Yes. You must turn AVL (Auto Volume Level) off. You should find this under Settings.

Thnx for your replie!
Already done this .. but no positive result
Now i'm running XDANROID and the problem is solved!?
Switch back to WM 6.5 (clean) and MC doesn't work perfectly...So now i'm running my TP2 on XDANDROID

XDANDROID has the bad habit of screwing up some settings in WM, so maybe you should try to hard reset your phone and upgrade it to the latest ROM. This should fix your problem.