Related
How to get S =off and superuser permissions
Make sure you are on 2.2.1 software and fastboot is turned off, usb debugging is turned on and phone not connected to computer via usb cable... before u attempt this.
First make sure you have visionary(downlod link) and terminal emulator(market) installed.
http://android.modaco.com/content/software/320350/19-nov-r14-visionary-one-click-root/
Place the visionary download file into sdcard and install the apk using astro file manager.
Root.rar (all files plus a script to make things a little easier. )
http://www.mediafire.com/?flit79p2y069bb3
md5sum: 46361b0cc8652d88688c0ab66d44950b
1. Download the root.rar file and unzip it to /sdcard on your device.(it should be a folder after unzip.[place the whole folder called root directly into sdcard])
2. Run VISIONary to gain temp root. Open visionary and check "set system r/w after root" then click on "temproot"..screen will go blank..thats normal.
Now open terminal and run some commands.
Terminal Emulator Method
3a. Start terminal emulator up on your device.(I prefer this method b/c you can see the output.)
a. type "su" + enter to gain root privileges.
b. Type "cd /sdcard/root" + enter.
c. Type "sh root.sh" + enter.
d. Follow the on screen prompts.
Turn off your phone and hold vol down and power. on the top u will see s =off.
select "fastboot" then shutdown or powerdown. Power you phone back on.
Open terminal and typr "su"..it will say permission denied. Thats normal
Now open visionary again. Make sure "set system r/w after root" checked then click on "temproot"..screen will go blank.. thats normal. Now click on "Attempt Permroot now" phone is reboot and you are all set
Go back into terminal and type "su" and it will say user permissions granted.
or
Thanks to Mackster248 for makeing a youtube video on how to root. Disclaimer [This video tutorial uses visionary r11 and my guide uses visionary r14]
http://www.youtube.com/watch?v=eHrtVzlsA_s
If any one is having problem with "su" permission denied, Try using visionary r11.
download link for: visionary r11 http://forum.xda-developers.com/showpost.php?p=9278164&postcount=899
-----------------------------------------------------------------------------
Flash a Custom ROM----Make sure fastboot is off and usb debugging is on.
1. Before we flash anything lets flash clockwork so that you are able to get into recovery. From the market download Rom manager(free). Open rom manager and click on "flash clockworkmod recovery". Wait few min. Rom manager will download and flash clockwork. Turn your phone off and Hold vol down and power. In the hboot menu select recovery and then the phone will restart. You will get a phone with yellow triangle error. Thats normal. Don't panic. Take the battery out for couple on min. Turn the phone back on. Open Rom manager again. Now click on "flash clockworkmod recovery". It will flash the recovery second time. We are doing this to make the clockworkmod stick. Now turn the phone off and see if you can get into recovery again. It should work.
2. Make sure you are permrooted and S =off. Also make sure you are able to get into recovery before you start flashing stuff. Download rom from XDA developers and save it to your computer.
3. Once it is saved, plug in your phone via USB cable and mount the SD card so we can save files to the sd card.
4. Copy the ROM’s .zip file over to the root of the sd card (NOT in any folders on the sd card, just on the root of the card) (do NOT extract it, leave it as a .zip).
5. In the custom recovery screen, select Nandroid then Backup and backup your current ROM.
6. Then select Wipe Data and wipe caches.
7. Then select Apply ".zip from sd card" and choose the ROM you downloaded earlier.
8. Once it is done flashing, click reboot system. Once it reboots, you are all set. Enjoy!
or
Thanks to Mackster248 for makeing a youtube video on how to flash rom.
http://www.youtube.com/watch?v=ah_vsW44lss
I am not responsable for damage to your device from flashing. Do this at your own risk.
Credit for these steps: http://theunlockr.com/2010/11/15/how...ryhboot-s-off/
Credit for these steps:http://forum.xda-developers.com/showthread.php?t=834225
Hey devs let me know if something need to be corrected in the steps.
Looks pretty good and Thank You. Only thing I noticed is the detailed steps for Rom Manager and clockwork are missing.
bobsbbq said:
Looks pretty good and Thank You. Only thing I noticed is the detailed steps for Rom Manager and clockwork are missing.
Click to expand...
Click to collapse
Sure I will it in the guide in couple of days.
Nothing missing that I can see, looks pretty good.
My MyGlacier 4G MINE!!!
Well I thought since he is going to the extent on detailing all the steps he might as well talk about the ROM Manager and recovery. Someone will say how do I get in to custom recovery if it is not mentioned that it is needed. If you are going the detail route then this should be included IMHO. I think this will help many new users.
I meant as far as the s off and rom flashing. I agree with you though that cw needs to be outlined a little better I just didn't mention it b/c he said he was going to add it later.
My MyGlacier 4G MINE!!!
Added the Rom manager and clockwork recovery steps under "flashing new rom". Plz can someone make sure this thread stay on first page bec i have see if no one responds the old threads move to second page.
Thank you very much this is my first android phone and when I followed the other root guide I didn't press perm root in visionary (last step), and a mod should sticky this so that it stays on the first page
moustafaraslan said:
Thank you very much this is my first android phone and when I followed the other root guide I didn't press perm root in visionary (last step), and a mod should sticky this so that it stays on the first page
Click to expand...
Click to collapse
I am glad I can help.
I also just flashed a rom using this tutorial and I can tell you it's pretty noob friendly. I mean I have flashed softwares on other phones but never on an android, once again great guide.
i followed this method and when it rebooted after the "perm root" my phone keeps getting this error: The process android.process.acore has stopped unexpectedly. Please try again.
I can't really use my phone at this point.. any suggestions?
thanks.
Is there a way to force the 2.2.1 update if on the stock 2.2? I've tried all methods so fat and can't seem to get it to update....there is no ruu file around?
Sent From HTC G2
Videos!
I actually just made how to videos on these two topics!
http://www.youtube.com/watch?v=eHrtVzlsA_s
http://www.youtube.com/watch?v=ah_vsW44lss
I hope it helps some of the newcomers!
To the OP: Maybe if the vids are good enough you can put the links in the first post?
I'm still on 2.2 tho I'd love to get my my4g like yours ugh lol is there a way to force the 2.2.1 update? Or should i just wait :-(
Sent From HTC G2
poulosjr said:
I'm still on 2.2 tho I'd love to get my my4g like yours ugh lol is there a way to force the 2.2.1 update? Or should i just wait :-(
Sent From HTC G2
Click to expand...
Click to collapse
Just wait, how long have you had the phone? On my first mt4g it took over a day to get my OTA update, but on my second one it only took an hour till I got mine. I've seen some people not get it till almost a week later.
peez206 said:
i followed this method and when it rebooted after the "perm root" my phone keeps getting this error: The process android.process.acore has stopped unexpectedly. Please try again.
I can't really use my phone at this point.. any suggestions?
thanks.
Click to expand...
Click to collapse
Either Nandroid back or perform fix permissions via rom manager application.
i was never able to install the rom manager after it rebooted.. i only have maybe less than a second to do anything until the next force close pops back up.
Ive had it 3 days my g2 got the update like within 45min lol
peez206 said:
i was never able to install the rom manager after it rebooted.. i only have maybe less than a second to do anything until the next force close pops back up.
Click to expand...
Click to collapse
Not really sure what went wrong. Did u make sure u were on 2.2.1 before you preformed the root method. I have tried these methods and never failed yet.
mackster248 said:
I actually just made how to videos on these two topics!
http://www.youtube.com/watch?v=eHrtVzlsA_s
http://www.youtube.com/watch?v=ah_vsW44lss
I hope it helps some of the newcomers!
To the OP: Maybe if the vids are good enough you can put the links in the first post?
Click to expand...
Click to collapse
Hey Mackster248 the videos look good. The only thing is the root video by u uses visionary r11 and so visionary r14 has more options than last version so some people might get confused. what u say?
[Edit: I've now resolved this issue. Thanks to all who helped. Please see end of thread for my solution. I've made some edits below too. When things looked bad, the solution was to remove the microSD card, copy and load a more reliable PC36IMG.zip (there are a huge number out there), and only then could I use adb when the red triangle was present. Note that just renaming stuff randomly or worrying about the USB cable isn't a proper way to come up with a solution even though I did it also (and that may be the case for some units but it can't be the general problem or solution). I'd guess there's a huge amount of misinformation out there and some people may have tried random stuff but it looks like from playing with all this, there is a method to the madness of how phone and the adb communicate, as well as how the phone loads, and once you UNDERSTAND HOW that process, all this stops being so much of a black magic.
Note that the problem I had was because I used an outdated set of instructions. Here are the ones that worked for me in the end:
http://forum.xda-developers.com/showthread.php?t=829045
Thanks to all who did reply to my message.
]
--------
I've tried literally everything I've read to get out of my red triangle situation so please help if you can. This is not your standard "hold volume up and power button" response.
I was trying to get to root using the method at evo4g.me.
And I got a red triangle after the first application of the PC36IMG.ZIP. I then held the volume up and power button and, I get a blue lettered screen with 4 options:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
Well, I've seemingly tried everything but I can't seem to get past this screen. I've pulled the battery out and rebooted, I go back to the above screen. Option 1 above gets me back to the same spot. Option 2 says it can't find sdcard/update.zip. I did option 3 but it does that and turns off and on and comes back to this same position. Even when I try to hold the volume button down. When I try to access this using adb, I get "device offline".
I can take the battery out, hold the volume down button, and then power on, and it takes me the through the same steps as before and I don't seem to have control over the choice of whether it should load the PC36IMG.ZIP file or not (i.e., the menu I see before it doesn't to be controllable by me).
So I'm at a loss. I really would like to finish this process and get to root, which shouldn't be too hard in my view but here I am.
I could move the SD card elsewhere and put an update.zip file on there but I'm not sure what to do here exactly so I can recover (and hopefully with root). Is this the correct thing to be thinking about? Move the SD card to another device, replace the .ZIP file, and then go from there? Is there a way to do this without moving the SD card?
[Edit: this is indeed what I did in the end. I found the correct PCIMG.zip file by trial and error.]
Thanks a lot!
BTW, I backed up all my apps on my sdcard so I should be fine right? I'm not sure what I'd need to do reinstall them.
[Edit: I lost some public keys, etc. with app reinstalls but I just had too many apps doing backups in different places and wasn't matching the right app restore to the right location in part.]
--
Backgrround: I'm new to the Evo 4G and in general new to doing stuff like rooting phones and the like, so please forgive me if my questions (or actions) or too naive. I have been using Unix systems all my life and Linux when there were fewer than 100,000 users of it (back in 1992-1993) and am extremely comfortable with it and do all my science (work) exclusively with Linux.
ramdom said:
I've tried literally everything I've read to get out of my red triangle situation so please help if you can. This is not your standard "hold volume up and power button" response.
I was trying to get to root using the method at evo4g.me.
And I got a red triangle after the first application of the PC36IMG.ZIP. I then held the volume up and power button and, I get a blue lettered screen with 4 options:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
Well, I've seemingly tried everything but I can't seem to get past this screen. I've pulled the battery out and rebooted, I go back to the above screen. Option 1 above gets me back to the same spot. Option 2 says it can't find sdcard/update.zip. I did option 3 but it does that and turns off and on and comes back to this same position. Even when I try to hold the volume button down. When I try to access this using adb, I get "device offline".
I can take the battery out, hold the volume down button, and then power on, and it takes me the through the same steps as before and I don't seem to have control over the choice of whether it should load the PC36IMG.ZIP file or not (i.e., the menu I see before it doesn't to be controllable by me).
So I'm at a loss. I really would like to finish this process and get to root, which shouldn't be too hard in my view but here I am.
I could move the SD card elsewhere and put an update.zip file on there but I'm not sure what to do here exactly so I can recover (and hopefully with root). Is this the correct thing to be thinking about? Move the SD card to another device, replace the .ZIP file, and then go from there? Is there a way to do this without moving the SD card?
Thanks a lot!
BTW, I backed up all my apps on my sdcard so I should be fine right? I'm not sure what I'd need to do reinstall them.
--
Edits based on trying to fix this: when I do `adb devices`, I get:
List of devices attached
HT0B6HL05287 offline
--
Backgrround: I'm new to the Evo 4G and in general new to doing stuff like rooting phones and the like, so please forgive me if my questions (or actions) or too naive. I have been using Unix systems all my life and Linux when there were fewer than 100,000 users of it (back in 1992-1993) and am extremely comfortable with it and do all my science (work) exclusively with Linux.
Click to expand...
Click to collapse
That is the stock recovery you are seeing there, does it let you do anything at all in the bootloader? If you can get it into fastboot mode you can fix it from there.
I rooted using regaw's instructions also, and also got that damn triangle, lol. Pretty sure all I did was reboot to bootloader and let it update the PC36.img again to get out of it.
xHausx said:
That is the stock recovery you are seeing there, does it let you do anything at all in the bootloader? If you can get it into fastboot mode you can fix it from there.
Click to expand...
Click to collapse
Yes, I believe so. I can let the PC36IMG.ZIP reload again and then AFTER that I can say "no" to the update and then "no" to reboot devices and I can get into a menu that says:
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
HSB USB
From there I can select FASTBOOT and head into another menu that says:
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
Trying BOOTLOADER gets me through the same HBOOT cycle where the PC36IMG.ZIP is reloaded and asked to be applied. Trying REBOOT gives me a white HTC screen (unless I need to wait a while).
Thanks! I assume I need to pull the SD card out, load it on my computer through another source, and then remove the PC36IMG.ZIP file and then replace it with something else that I can use to get rooted? Or will just removing the PC36IMG.ZIP file do it?
I'm also looking to achieve root so if I am going to the trouble of removing the SD card and putting it back, I'd like to know if if there's another PC36IMG.ZIP that'll let me have a nice version of the HTC evo that is rooted.
--Ram
I know a few people who have recently purchased EVOs and they still have Hardware version 3 and Hboot .97
what versions do you guys have on your phones?
If the hboot is still .97 you can used unrevoked forever for a full root and nand unlock.
if higher there is a tutorial on these forums for Hboot 2.02.
chris66 said:
I rooted using regaw's instructions also, and also got that damn triangle, lol. Pretty sure all I did was reboot to bootloader and let it update the PC36.img again to get out of it.
Click to expand...
Click to collapse
How did you do it?
Tuffgong4 said:
I know a few people who have recently purchased EVOs and they still have Hardware version 3 and Hboot .97
what versions do you guys have on your phones?
If the hboot is still .97 you can used unrevoked forever for a full root and nand unlock.
if higher there is a tutorial on these forums for Hboot 2.02.
Click to expand...
Click to collapse
I have:
SUPERSONIC EVT2-3 SHIP S-ON
HBOOT-2.02-0000
TOUCH-PANEL-ATMELC-03_16ac
RADIO-2.15.00.09.01
Oct 14 2010, 19:14:47
I assume the tutorial you're referring to is here:
http://forum.xda-developers.com/showthread.php?t=829045
But I'm not sure how to get out of this particular PC36IMG.ZIP (gotten from evo4g.me) and replace it with the PC36IMG.ZIP posted in the above URL above easily, since I can no longer access this device using adb. Unless I am missing something obvious.
Well, I'm learning a lot! Thanks!
I do agree having root on these systems will be fantastic. I don't understand why it's not just a ready option. Things like tethering, etc. should be a given and built into the $10 cost or something else of the network. I'd like to port things like csh on there, and have a powerful terminal like I can get in the Mac OS X. Is there any way this is possible at all? We can get bigger and bigger microSD cards right? An entire stripped down Linux system can fit in a few gigs (but I want to be able to use it as a phone too).
--Ram
Went backward in the directions.
This the whole post that I used, pretty sure I just went backward and started again, it did take a seemingly HUGE amount of time the first time thru flashing the PC36.img
http://forum.xda-developers.com/showthread.php?t=765496
PULL THE SD CARD and put the image on the root? , lol
chris66 said:
Went backward in the directions.
This the whole post that I used, pretty sure I just went backward and started again, it did take a seemingly HUGE amount of time the first time thru flashing the PC36.img
http://forum.xda-developers.com/showthread.php?t=765496
PULL THE SD CARD and put the image on the root? , lol
Click to expand...
Click to collapse
The instructions at the above URL are what I used to get to this place with the red triangle that I can't seem to get out of. I can no longer access the phone using adb so I can't push anything. I can't access the phone through my computer right now once it has become stuck at the red triangle, this is my main issue. No access. Nothing. It just says "error: device offline" no matter what I try.
You don't think the SD CARD strategy will work?
This is where I scared the **** outta myself.....
"If this doesn't work (ie the PC36IMG.zip does NOT load) backup all of your sdcard contents onto your computer, reformat your sdcard to FAT32, redownload the PC36IMG.zip, and drag and drop it onto the sdcard, then reboot into the bootloader and try again. This should fix the issue."
It worked for me, but I don't know what hardware version and all you have.
ramdom said:
The instructions are the URL are what I used to get to this place with the red triangle that I can't seem to get out of. I can no longer access the phone using adb so I can't push anything. I can't access the phone through my computer right now once it has become stuck at the red triangle, this is my main issue. No access. Nothing. It just says "error: device offline" no matter what I try.
You don't think the SD CARD strategy will work?
Click to expand...
Click to collapse
just pull the sd card out of the evo (behind the battery) and put the new img on the root of the card.
chris66 said:
This is where I scaref the **** outta myself.....
"If this doesn't work (ie the PC36IMG.zip does NOT load) backup all of your sdcard contents onto your computer, reformat your sdcard to FAT32, redownload the PC36IMG.zip, and drag and drop it onto the sdcard, then reboot into the bootloader and try again. This should fix the issue."
It worked for me, but I don't know what hardware version and all you have.
Click to expand...
Click to collapse
Me too, but I pay for the extra warranty that's supposed to cover nearly everything, which I think should cover this.
So from the above instructions, am I to understand that I remove the sdcard out and clean it out in my computer and install a new PC36IMG?
Should I try the one from here? Even here, there are like 3 versions:
http://forum.xda-developers.com/showthread.php?t=829045
Sorry for all the questions. Normally I'd hack and figure this out without even googling it but after googling it, the amount of stuff out there is enormous which is throwing me off. I think I have like 10 versions of the PC36IMG and not sure which to go with next that'll not destroy everything and give me root! Crazy.
Tuffgong4 said:
just pull the sd card out of the evo (behind the battery) and put the new img on the root of the card.
Click to expand...
Click to collapse
Thanks a lot. Pulling the evo card was easier than I thought it would be. Which particular one? I'm looking here:
http://forum.xda-developers.com/showthread.php?t=829045
Should I just manually copy all these files over to the sdcard and then reboot and see what happens? I guess I'll try that. Thanks.
Thanks guys!
--Ram
Well, I solved this problem and am now enjoying root. Thanks to all who helped. I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=829045
But I still couldn't get past step 10. I even read the FAQ and followed the renaming suggestions (this wasn't the issue but I did it anyway) and it still didn't work. Basically the problem was that I wasn't even able to get to the shell even though I was able to use adb to push files (weird?).
So I was playing around with the EVO-recovery.zip (http://www.knowyourcell.com/htc/htc-evo-4g/evo-4g-guides/463925/how_to_root_the_htc_evo_4g.html) and ran the recovery-linux.sh script, which then put me into the green recovery screen. The rest was straight forward after that (as per the instructions at the URL above). So perhaps the difference of which adb to use was what it was, since that zip file comes with its own adb.
I am now rooted. Now what?
My wi fi doesn't seem to work, and neither does the google wireless tethering app, which is one of the reasons I wanted to root. When I run "adb shell" I now get a "#" instead of a "$" so I assume this (among other things, including the S-OFF) means I am rooted. So no wi-fi, did I trash something?
[Edit: I fixed this by installing the fresh ROM; thanks chris66 and others who helped!]
I'm just using the stock ROM provided from the URL above. Not sure what the best one to use is and how to use it.
[Edit: Stil no idea. Way too many ROMs out there. It's crazy. Fresh seems to have a good rep. It works pretty well, after one week.]
I also backed up all my apps on my sdcard, is there a way to restore them in one quick fell swoop instead of opening them one by one?
[Edit: I figured out how to do the multiselection option and apply it apps. A good file manager will do the backups for you. I went from ASTRO to ES File Explorer. Latter looks slightly cleaner. Probably better ones out there.]
Thanks to all who helped! I am excited about playing around with all this further. Only PITA is reconfiguring everything again the way I like it.
[Edit: Favourite apps are ConnectBot; Android Wireless Tether; AndroidVNC; DropBox; ES File Explorer; System Panel; --- from Ubuntu, I ADB to access stuff at the prompt which when having a # is really really powerful. Maybe I was wrong but before I put the new ROM on I didn't think the "more" command was available.]
Cool, try superuser and the wifi app from the market. Flash almost any of the newer roms, and they're already both usable, wifi and usb.
Sent from my PC36100 using XDA App
First off, let me say that I did not develop this schtuff and all thanks should go to those that did. Special thanks to noobnl (his thread here), mskip and TeamEpic for all their work.
A note about these instructions:
They're long and may seem a little daunting to those that aren't experienced. Please don't let that deter you as they've been written to be as simple and easy to follow as is reasonably possible assuming you can work a Windows PC and extract a zip file.
==> If you encounter problems with these instructions, please check the FAQ in the post following this one. <==
For video instructions (courtesy of qbking77) scroll to the bottom of this post.
General Disclaimer:
Use these tools and this guide at your own risk. Doing these things wrong/improperly/etc. has the ability to completely ruin your device and YOU assume all risk and responsibility if that happens.
Also note that rooting WILL violate the manufacturers warranty on the device making it ineligible for warranty repair. If you have insurance on the device however, they MAY still replace it for the cost of your deductible.
Click to expand...
Click to collapse
Non-ADB Root instructions (Windows Only):
First, the non-dangerous, standard user stuff:
Download and install the Samsung USB drivers from Samsung's website: http://downloadcenter.samsung.com/c...nt_L710_GSIII_Samsung_USB_Driver_v1_4_6_0.exe
Turn on Debugging on your Phone
Open Settings
Select "Developer options" in the System section
Check the box for "USB Debugging"
Press "OK" to confirm.
Plug you phone up to your computer using the USB cable and allow the drivers to install.
Download CMW_SuperUser_v3.07.zip from the bottom of this post
I recommend making yourself a nice little GS3 folder in your downloads folder for all this stuff so it's easy to find
DO NOT UNZIP!!
Copy CMW_SuperUser_v3.07.zip on to the Root of your GS3s INTERNAL storage (if you put it into a folder, you may have a hard time finding it later, but that's on you).
DO NOT UNZIP!!
Unplug your phone
Power off your phone
Now, this is the part that can BRICK your phone so follow ALL instructions CAREFULLY!!
Download Odin3-v3.04 from the bottom of this post
Extract Odin3-v3.04 into it's own folder somewhere where you can easily find it.
Download clockworkmod.tar from the bottom of this post to somewhere you can easily find it.
Reboot your phone into download mode
Hold down Volume Down, Home and then the Power button until the Warning!! message is displayed
Press Volume Up to continue.
Your phone should now be in download mode, displaying a green Android and say Downloading. If it is not, power off your phone by holding down the power button and then try to get into Download mode again. Do NOT progress until you have done so.
Go into the folder you extracted Odin3 into and run Odin3 v3.04.exe (you may have to Right-Clik => Run as Administrator)
Connect your phone to your computer via USB. Drivers may install again; if this happens, allow them to finish before progressing.
In Odin, the COM box all the way to the left should turn blue and it should say Added!! in the Message area.
Click on PDA and in the Open window that pops up navigate to and open the clockworkmod.TAR file you downloaded earlier
Verify that Auto Reboot and F. Reset Time are checked
Click Start. Once the process is completed you device should automatically reboot and there will be a green PASS! box in the upper left of the window. You can then close Odin.
Power off your device and boot into Recovery mode
To boot into Recovery mode: Hold down Volume Up, Home and then the Power button until the device begins to power on then release all 3.
You'll know you're in recover mode when it says "CWM-based Recovery" at the top of the screen
Install CMW_SuperUser_v3.07.zip that you copied onto your internal memory
Navigating ClockWorkMod Recovery: Use the Volume Up and Down rocker to change the highlighted option and the Home button to select an option. The Back softkey works, but will not be lit and will take you back one screen.
Installing a zip:
Select "Install zip from sdcard" (Yes, I know it's on the internal storage.)
Select "Choose zip from sdcard"
Select the zip you want to install; in this case CWM_SuperUser_v3.0.7.zip
Select "Yes" to begin installing
Once the process has completed use the Back arrow to get back to the main recovery screen (Remember: it works, but it's not lit) and select "reboot system now." Once your device boots up you should now be 'Rooted,' but there's still a few more things to be done
Install BusyBox. There are actually several ways to do this, but the BusyBox app in the Google Play Market is quick and easy.
Install BusyBox (this is a link to the online verison of the Google Play store. You can actually follow this link and install it from there and it will get pushed to your phone. Alternatively, just search for BusyBox in the Google Play store and it should be the first app in the search results from author Stephen (Stericson))
Open BusyBox Free from your App Drawer
Allow it Root access when it prompts you
Tap the red "X" to close the dialog window that pops up
Allow BusyBox to scan you phone
Tap "Install" to install BusyBox and make the necessary file changes.
Update your Binaries.
Open the Superuser App from the App Drawer
Get into settings (the wrench icon in the upper right of the screen)
Select Su binary under the General section towards the bottom of the list
Select Update
Your device is now rooted and all set.
How to video (YouTube): http://www.youtube.com/watch?v=7Soapch0c5U
Thanks again to qbking77 for the instructions video!
P.S. If you are a developer or I have used some of your material and/or you feel you should be credited, please let me know and I will update this post.
Frequently Asked Questions
This FAQ is in the works as more questions roll in so I'll do my best to keep it updated.
Q: Odin failed! What do I do!?
A: Try plugging your USB cable into a different USB port on your computer and/or try a different USB cable (Odin's picky about the cable). The drivers may install again; if so, wait for them to finish. After that, verify that the device shows as Added in Odin again and click start again. If that still fails, try unchecking F. Reset Time box and removing any MicroSD card you have in the device, plug the device into (yet another) USB port and try again.
Q: Will these instructions work for other US (LTE) versions of the GS3?
A: I have not personally tested this method on any other versions of the GS3 but uoY_redruM and carrrnuttt (and others) have confirmed that this method works for the T-Mobile version as well. It should in theory also work for the AT&T and Verizon versions, though that's unconfirmed at this point.
Q: Ok, so I've got Root. What now?
A: That's entirely up to you. Root allows a near endless amount of customizatoin, but some of the most commonly sought after benefits of Root are these:
Root Only applications. These allow you to simply do more with your phone or tweak the way it functions. Some that I personally recommend are:
Titanium Backup and its Pro Key => For making backups of your apps, app data and system data and uninstalling or freezing Bloatware.
Quick Boot => For booting drectily to recovery or Download Mode (listed as Bootloader in the App)
Removing Bloatware => I recommend Titanium Backup for this
Loading custom ROMs. There aren't many floating around just yet, but I expect that'll change soon as the ball gets rolling.
Excellent write-up. Thanks. Now can we install custom roms from other forums or do we have to specifically wait for any to come up here.
Great write up! very easy and simple
daniel06gt said:
Excellent write-up. Thanks. Now can we install custom roms from other forums or do we have to specifically wait for any to come up here.
Click to expand...
Click to collapse
You should wait for any specific Sprint Galaxy S3 ROMs that get posted if you want to ROM your phone. I'm sure some will be popping up by the end of the weekend so I wouldn't expect that you'll have to wait too long
Excellent write up, though I don't see the difference in methods; maybe because I speed read it but if you follow noobnl's method, you basically do the same thing, minus the adb to set the permissions, though if you install busybox, its the same goal. Again great because some people are afraid of adb.
Very nice work... I'll get a how to video going very soon!
(repost, sorry)
Great write-up! Thanks for taking the time to do this.
Thanks for writing this up!
teh roxxorz said:
Excellent write up, though I don't see the difference in methods; maybe because I speed read it but if you follow noobnl's method, you basically do the same thing, minus the adb to set the permissions, though if you install busybox, its the same goal. Again great because some people are afraid of adb.
Click to expand...
Click to collapse
Yes, this and noobl's method are pretty much the same, the main reason for this post is to put the method into an easy-to-read step-by-step format that's easy for beginners to follow. Remember, we were all beginners at some point
I come from HTC so Odin is new to me, this guide is little more friendly than noobl's method. Although either would suffice this is just pretty clearly laid out.
Look forward to root.
Very nice and simple
Thank you. Now let the games begin....
cypher_zero said:
[...]Remember, we were all beginners at some point
Click to expand...
Click to collapse
While I expect a fair amount of carry-overs from Sprint Epic's and Epic Touch's, I also expect a large influx of excited users who haven't used a Galaxy S phone before.
:highfive:
How to video is done! Just have to compile and upload it
qbking77 said:
How to video is done! Just have to compile and upload it
Click to expand...
Click to collapse
Always on the ball qbking77 gotta add galaxy s 3 to your signature now =)
teh roxxorz said:
Excellent write up, though I don't see the difference in methods; maybe because I speed read it but if you follow noobnl's method, you basically do the same thing, minus the adb to set the permissions, though if you install busybox, its the same goal. Again great because some people are afraid of adb.
Click to expand...
Click to collapse
I hate adb that shiit is tedious LOL
tj.iscool said:
I hate adb that shiit is tedious LOL
Click to expand...
Click to collapse
You can always script a bat file or two, saves always rewriting commands.
tj.iscool said:
I hate adb that shiit is tedious LOL
Click to expand...
Click to collapse
I actually prefer adb over one click roots.
Something about seeing what your doing and sense of accomplishment lol
cypher_zero said:
Yes, this and noobl's method are pretty much the same, the main reason for this post is to put the method into an easy-to-read step-by-step format that's easy for beginners to follow. Remember, we were all beginners at some point
Click to expand...
Click to collapse
No qualms there, just making sure I didn't miss anything. Though you are right, it may be hard for a beginner to follow noob's more experienced cut throat guide. Kudos.
This is a guide for noobs
First things first, ask yourself am I using a T-Mobile Note II SGH-t889?
If you are not, stop now.
Now if your phone blows up, fires nuclear missiles, activates sky net, or becomes a nice pretty paperweight, I am not responsible. You are using this guide at your own risk.
That being said I have provided the exact methods I used to do this on me device and it works perfectly.
OK let’s begin.
First plug your phone into your computer.
-If you are getting an error message about a connection you must have windows xp SP3 or higher (vista, windows 7)
-you must also have the Samsung mobile phone drivers available here http://forum.xda-developers.com/showthread.php?t=961956
-you must also have windows media player 11 available on the Microsoft website.
Now that you have all this you should be able to explore the files on your phone, it will be under mobile devices.
Now on your desktop let’s make a new folder called System Folder, and in that Folder make two folders, one called ROM and one called KERNEL.
Now back on the desktop let’s make another folder called ODIN
SYSTEM FOLDER
-ROM
-KERNEL
ODIN
Let’s go over to the T-mobile note II XDA forum page http://forum.xda-developers.com/forumdisplay.php?f=1877
Now we’re going to go to the section called ORIGINAL ANDROID DEVELOPMENT
Download the KERNEL "peruses". http://forum.xda-developers.com/showthread.php?t=1960935
Download the one that says Perseus-alpha27.4-T889-CWM.zip (though the version number may change)
Put that file in the KERNEL folder (DO NOT UNZIP IT)
Download cwm6-recovery-n7100-121014.tar : http://www.mediafire.com/?mouxvj4og7azcow CWM md5: 67208cd19e82478af8591a83ca0a39b2 (the md5 is used to check your download, make sure you have no errors)
Put this file in the ODIN folder
Download CWM SUPERSU installable ZIP: http://www.mediafire.com/?w3i20sr6r58r8ah (put this in System Folder, DO NOT UNZIP)
SU md5 : 010b98d757544d7b2971574951c1d5e6
Download PC Odin: http://d-h.st/6Er put this into the Odin folder and unzip this one
Download Xquizit rom http://forum.xda-developers.com/showthread.php?t=1960950
Download the xquizit rom kitchen too.
Put these in the ROM folder, (DO NOT UNZIP)
This rom is straight forward, once you get the hang of flashing try other ROMs.
Now copy the System Folder to your phones external SD card.
Now open Odin and select the pda button and select the cwm6-recovery-n7100-121014.tar file in the Odin folder on desktop
Now switch off device and reboot in download mode by:
Press Vol down + Home +Power, and then, press Volume UP button in Warning Page to enter the Download Mode
Connect device to PC and wait till device successfully added to com port (it will turn light blue)
Hit ‘Start’ to flash
Once it flashed successfully, you can see 'PASS' in table above the ID: COM, you can disconnect device from PC
Now reboot into CWM by: Switch off device and press Vol Up + Home +Power hold about 5 second
Install SuperSu by selecting install zip from SD card, then select install zip from external SD card, then navigate to system folder and install the superuser.zip that is there.
Reboot.
Download Triangle Away from the play store or from http://forum.xda-developers.com/showthread.php?t=1494114
Run this and it will reset your flash counter to 0.
You have now achieved root.
Install titanium backup, and backup all of your user apps+data (USER APPS ONLY or just reinstall them all from the play store) (you can do this one by one or in a batch in the third tab if you have the paid version. (DO NOT BACKUP RED NAMED FILES, ONLY WHITE)
Download APN backup and restore from the play market
Open it, you will get an error, dismiss it and press the back button
Open titanium and find APN backup and restore, long press it and select to make it a system app.
Press home.
Open APN B&R. and dismiss the error, this time hit menu and disable the ICS check. Then press back and reopen it, NO ERROR
Now backup your APN settings.
Switch off device and press Vol Up + Home +Power hold about 5 second to go back into recovery
Go to the backup/restore section, and backup your current rom (do not skip this, we are about to erase your phone and if something goes wrong and you do not have this, pretty paperweight)
Now go back to the main menu
Wipe data and factory reset 3 times over, wipe cache 3 times over, now go to advanced and wipe dalvik cache 3 times over
now go back to the install zip from sd card menu and select the external sd card, navigate to system folder, and then Rom, then install the xqizit rom.zip file it will open aroma installer, it will give you options of what you want to do, you do not need to re wipe, install typical or custom to choose what apps you want, (svoice is removed unless you add it back under custom) then you want to install the 15 toggle mod.
Now once that is done, reboot the device, wait 10 minutes.
Now open the play store and update superuser
Download apn backup and backup the new tmobile apn with the wifi fix and titanium backup and restore your apps
You are now rooted and on a custom rom with multi window support. Hold down the back button to activate multi window.
Reboot into recovery
Install the perseas kernel zip from the kernel folder
Reboot the phone
Wait for the home screen
Reboot for good measure
You will want to put triangle away back on your device and run it again
You can download CPU control apps and over clock and under clock ECT.
You can change your boot animations; see my post under themes n apps for that.
Have fun and enjoy
Special thank to Dr.Ketan , Chainfire , Chenlu, simplelife, wild child, and any others I have forgotten to mention
Well I would say this needs a sticky...
But since we cant get anything stickied for no reason at all. It will just wander off into the forgotten realm of the tmobile note 2 forums in the dark cold depths of xda where no one cares to do anything to help organize this forum.
Not only do we have worthless posts repeated day after day to no end, and the same question asked repeatedly by the same user. The foreigners that dont have a clue. And trolling to no end. But a thread that could possibly help someone one day will just die along with 'help I bricked my phone' threads. What a shame...
Someone please sticky this
Sent from my SGH-T889 using Tapatalk 2
This snt fair to let this thread go into oblivion. Mods please sticky this guy actually spemt some time making something useful but you guys wont sticky it. Yet viirus comes on here and bilks money from the community and basically steals doing absolutely nothing to back up his promises and people treat me like crap.
But you guys loved him....this is messed up.
Do something positive for the community.
I was right the first time. Please just listen to me
Sent from my SGH-T889 using Tapatalk 2
Bump for your hard work.
This seems like a great tutorial and guide. The only thing missing might be pictures for the super noobs
I haven't tried this yet but i subbed for future reference
What about backing up the IMIE? Forgive me if it's in there it's just that I am very nervous about that. I am coming from the HTC Sensation and am not familiar with flashing Samsung phones. And from what I am understanding this issue is even new to those that have been flashing Samsung phones in the past
To be honest
I havr never backed up my imei
I only use sammy
I have never had a problem
Ill look into this for you though
Good point, better safe than sorry.
Sent from my SGH-T889 using Tapatalk 2
Thankyou for your kind words.
I made this for one particular person who was a bit afrade of rooting.
As always I share with the world for those who dont think to or are afrade to ask.
Sent from my SGH-T889 using Tapatalk 2
Don't wanna be a hater, but this guide is super drawn out. There is already plenty of guides that explain it much better, A for effort tho.
Yea its long but I mean where are the other guides? This forums a mess and theres no sticky thats what I was talking about
Sent from my GT-N7105 using Tapatalk 2
Thread closed
The stickies you all want regarding root already exist in the Development forum. Everything you need to know is contained in that thread.
Note: This is an old phone. It's no longer being supported by Samsung, and I see that nobody is selling this phone except for eBay or Amazon. I also have a new phone now and my Discover is simply sitting there for me to have fun with. I won't be actively developing for this phone. However, I will provide support with any issues you may encounter. This thread will be kept here for future reference if anyone needs help.
Update (2022): I am no longer using Android. This is my last update here.Copies of the relevant files are shared in this google drive link:
SGH740M Root Files - Google Drive
drive.google.com
Please thank Ivdoan he is the mastermind behind finding and implementing root for this phone.
Thanks to JohnnyGalto for giving us updated CWM, TWRP, and Partition Tables!
THIS THREAD IS INTENDED TO USE ONLY FOR THE SGH-S730M, AND NOT FOR ANY OTHER PHONE. I CANNOT CONFIRM THAT IT WILL WORK ON ANY OTHER SGH-S730 VARIANTS, SO USE THIS THREAD AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY DATA LOSS, OR BRICKING THAT IS A RESULT FROM YOU CHOOSING TO ROOT. HOWEVER, IF YOU SOFT BRICK YOUR PHONE, IT CAN BE FIXED VIA CLOCKWORK RECOVERY. WARNING ABOUT USING ODIN: IF YOU ARE A NOOB, ONLY CLICK ON THE BUTTONS I TELL YOU TO CLICK, AND NOTHING ELSE. I ACCIDENTALLY SOFT BRICKED MY PHONE BECAUSE I HIT THE WRONG BUTTON WHILE USING ODIN - AND DONT WANT YOU TO DO THE SAME THING. AND LASTLY, ROOTING AND MODDING THIS PHONE WILL VOID YOUR WARRANTY. SINCE THERE IS NO OFFICIAL WAY TO RETURN TO STOCK, ONCE YOU MODIFY YOUR PHONE: YOU ARE ON YOUR OWN FATE!
IF YOU HAVE THE 730G VARIANT (Tracfone, Net10), GO HERE: http://forum.xda-developers.com/showthread.php?p=47417608
Click to expand...
Click to collapse
Issues and Bugs (Known Problems)
Okay, with deodexing - sometimes the SamsungIME.apk in the /system/app directory can be a pain to deal with! I put a warning in my deodex CWR script that tells about this issue. It does seem to correct itself overtime, so I am not too worried at the moment (but still very annoyed).
Also, it seems that many users have been experiencing strange battery problems (such as the phone suddenly losing half of its charge in 3 minutes). I hope it is an software issue (correctable), or just a battery issue (fixable), rather than a hardware issue (hard to fix).
Rooting, Custom Recovery, and Unbricking Guide (Everyone)
]If you want to root your phone then follow part A.
If you want to root your phone and add custom recovery then follow parts A and B.
If you have soft bricked your phone, then please complete all steps outlined below (if not already done yet).
The tutorial is done on a Windows computer and is meant for a Windows computer. Steps will vary slightly or tremendously if it is done on any other OS.
Part A - Rooting the SGH-S730m
1. Download and install UnlockRoot Free on your PC. YOU DO NOT HAVE TO INSTALL BLOATWARE!!! PLEASE READ SETUP INSTRUCTIONS CAREFULLY!!!
2. Download and Install Samsung USB Drivers. If it prompts you to reboot for any reason, then reboot your Computer.
3. After all of this is over, you have to prepare yourself for the hardest part of this whole process, and maybe the most complicated dilemma you will ever face in the entirety of your lives.
4. Turn on your phone if it isn't already. Wait for the phone to fully boot.
5. Plug your phone into the computer via USB.
6. Run UnlockRoot on your computer and click the "Root" Button (when it prompts you to install bloatware apps on your device, say no).
DO NOT UNPLUG YOUR PHONE UNTIL UnlockRoot SAYS IT IS OK TO DO SO!!!!
Congratulations, you have should now have a rooted SGH-730m in proximity to your hands! :fingers-crossed:
How to verify your 730M is rooted
If by any reason, you feel unsure as to if your phone is actually rooted or not:
Install a root checking app.
These apps will tell you if your phone has root access or not.
Try Root Checker from the Google Play Store.
Install a terminal emulation app.
In these apps, type the command "su" (without quotes). If you get "permission denied" you have not rooted your device. If it prompts you for root privileges (ie a popup appears) then your device is rooted!
Try Terminal Emulator from the Google Play Store.
If you are a n00b (like me occasionally), and you fail to understand why something works, or, the exact opposite: Don't worry! You probably thought the auxiliary headphone jack was the USB port, or, thought you should unplug your phone early, despite me warning you not to do that. That's okay, you can get it fixed.
Part B - Installing a Custom Recovery
If you are not already acquainted with the idea of Custom Android Recovery, don’t be afraid. It allows developers, tweakers and noobs alike to backup, restore, fix, and to install custom ROMs and Kernels designed specifically for their device. It becomes extremely useful, because it allows people to remove “soft bricks†from their devices (which occurs when someone flashes data to the wrong device, or wrong parts of the device respectively).
I know you probably just want to not read this stuff anyways But I need to pay tribute to the developers Ivdoan and JohnnyGalto for there amazing work at compiling these custom binaries for the Samsung Galaxy Discover. Thanks guys.
So, lets get started – shall we?
Click to expand...
Click to collapse
YOU MUST ROOT YOUR PHONE BEFORE YOU DO THIS!!!!!
1. Download either the SGH_S730M.CWM_6.0.3.1.custom.recovery.tar.zip or the SGH_S730M.TWRP_2.5.0.0.custom.recovery.tar.zip file, and extract its contents to your desktop (if you don’t know what a desktop is, then please leave. You will probably break your device).
Just to clarify for those noobs out there: CWR stands for “ClockWork Recovery†and TWRP stands for “Team Win Recovery Projectâ€. They both are custom recoveries, and basically do the same thing. Personally, I would recommend the CWR for people that just want simplicity, and the TWRP for people that want more appeal. TWRP for this device is still under development, so be careful!
Click to expand...
Click to collapse
2. Then, download the Odin Flashing Program attached to this post. Extract its contents to wherever you find necessary.
DO NOT MESS WITH ODIN! IT IS NOT A TOY! IT CAN BRICK YOUR PHONE!
Odin, is a flashing tool. It is not made to be user friendly, and is meant for people who know how to use it. I will be very blunt by saying that I AM NOT RESPONSIBLE FOR YOU NOT DOING EXACTLY WHAT I TELL YOU! PROCEED WITH CAUTION!
Click to expand...
Click to collapse
3. Right Click on Odin, and click “Run as Administrator†(if available).
4. CLICK ON THE PDA BUTTON
5. When the file window appears, browse to the desktop directory (your desktop) and select either the S730M-CWR.tar.md5 or the S730M-TWRP.tar.md5 (depending on what version you downloaded).
6. Now shutdown your phone. Plug your phone into your computer. Boot into download mode by turning on the phone (release the power button as the phone vibrates) and holding the lower volume button and home key. Follow the instructions (press the upper volume button) to continue with download mode.
7. If your phone has been detected by Odin, the proceed.
8. Inside of Odin, press the Start button.
DO NOT DISCONNECT, UNPLUG, PLAY WITH ANY BUTTONS, OR CLICK ANYTHING ON EITHER THE PHONE OR COMPUTER UNTIL ODIN HAS FINISHED FLASHING CLOCKWORK RECOVERY ON YOUR PHONE.
8. To boot into clockwork recovery, hold down the upper volume and power key until the first vibration, then just hold the volume key.
That should be IT! :highfive:
Part C - Soft Brick Recovery (CWM Recovery Only!)
YOU MUST HAVE A MICRO SD CARD WITH AT LEAST 400 MB OF FREE STORAGE SPACE TO DO THIS!
build.prop restore script
You need busybox installed on your phone in order to use this script! If you dont have busybox, it wont work.
If you messed up your build.prop file (If you did, then you will know that you did), then you can use this script to restore you build.prop file to the original stock format.
1. Download the build.prop restore script, to your device (preferably a computer).
2. Place the zip file to the root (/) directory of your micro SD Card.
3. Remove the SD card from the computer, and turn off the SGH-S730M.
4. Remove the back plating from the phone, and insert the micro SD card into the phone. It should be named SGH-S730M CWR stock build.prop.
5. After putting the phone back together, boot into recovery by holding down the upper volume and power key until the first vibration, then just hold the volume key.
6. Using the volume buttons as scrolling keys, scroll down using the lower volume until you see install zip from sdcard as highlighted text. Using the power key as the enter button, click the power button.
7. Then, also using the volume keys, scroll down to the choose zip from sdcard option, and click the power button.
8. If you placed the zip file exactly where I told you to: you should see SGH-S730M CWR stock build.prop as an item. Scroll down to the file and click the power button. Then, when it prompts you to "Confirm Install", scroll down to "Yes - install".
9. Press the power button.
WAIT FOR THE PHONE TO BE 100% DONE EXECUTING THE SCRIP! YOU COULD MESS UP THE PHONE. DO NOT TURN OFF THE PHONE.
Full Restore (If all else fails)
To reduce confusion, please remove any backups that you may already have (which would be funny, you wouldnt have to do this anyways).
1. Download the rooted stock CWM Recovery Image (.zip) from here, to your device (preferably a computer). http://forum.xda-developers.com/showthread.php?t=2677332
2. Extract ALL of the contents of the zip file to the root (/) directory of your micro SD Card. The folder should be named "clockworkrecovery".
3. Remove the SD card from the computer, and turn off the SGH-S730m.
4. Remove the back plating from the phone, and insert the micro SD card into the phone.
5. After putting the phone back together, boot into recovery by holding down the upper volume and power key until the first vibration, then just hold the volume key.
6. Using the volume buttons as scrolling keys, scroll down using the lower volume until you see backup and restore as highlighted text. Using the power key as the enter button, hit the power button.
7. Then, also using the volume keys, scroll down to the restore option, and click the power button.
8. If you extracted the zip file the exact way I told you to: you should see a menu option. If you didn't do what I told you to, you may see "No files found". If it says "cant mound /sd" (or something similar), you probably have a bad SD Card, or, forgot to put it in correctly.
9. Press the power button.
WAIT FOR THE PHONE TO BE 100% DONE RESTORING YOUR BACKUP TO THE PHONE! YOU COULD HARD BRICK THE PHONE (BECAUSE CWM RECOVERY WRITES TO THE BOOTLOADER). DO NOT TURN OFF THE PHONE. THE PHONE IS NOT FROZEN IF IT WONT RESPOND FOR A WHILE.
10. If you did this correctly, you should have a rooted, and restored SGH-S730m!
Part E - Removing that annoying triangle from the boot sequence
Use the triangleaway script in the attatchments. (triangleaway.zip)
It resets flash counter and resets binary status to official.
Might have to do a factory reset to return current status to official.
Boot your phone into recovery mode
Extract triangleaway.sh from the zip file.
Open up ADB Shell
push triangleaway.sh /tmp
chmod 755 triangleaway.sh
execute triangleaway.sh
Reboot Phone.
Overclocking and Modding (DEVELOPERS ONLY)
SYSTEM MODS
If you don't know what you are doing, then, please don't read any further. its for your own good
The CSC directory can be deleted (and the files in the main /system directory that are associated with it). It does not affect the phone at all. Also, If you go to /system/etc/feature_default.xml you can change the phones features. So far, I have done many tweaks to the Messaging, Phone, Settings, People (Contacts) and Lock screen of the phone! If you are a developer (or tweaker like me), you should be able to enable/disable whatever you like using the feature_default.xml.
Overclocking
FitAmp has made a overclocking script for 1GHz (1000MHz). There is quite a noticeable difference in response, but, the phone still tends to lag a bit. File is attatched to the thread (S730M-OC-1000MHz.zip)
Custom ROMs
Custom ROMS by atmu5fear. All flashable ZIPs. - http://forum.xda-developers.com/showthread.php?t=2677332
I'm also making one for the Discover. It should be coming soon.
Please click :good: if it works for you!
Where can I find the OC script? Thanks
evertking said:
Where can I find the OC script? Thanks
Click to expand...
Click to collapse
The Script it attached to this post.
Procedures (using ADB)
put boot.img on sdcard:
adb push boot.img /sdcard/boot.img
Then, from adbshell:
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
then reboot device.
shifattk said:
the op of this post decided to dump this thread and developing, so i decided to take over & repost this, as requested by the op.
I will also organize and add more of my stuff. That might take at least a week or so since everything is a mess right now, but i will do it.
***** original thread is here *****
please thank ivdoan he is the mastermind behind finding and implementing root for this phone.
Thanks to johnnygalto for giving us updated cwm, twrp, and partition tables!
issues and bugs (known problems)[
okay, with deodexing - sometimes the samsungime.apk in the /system/app directory can be a pain to deal with! I put a warning in my deodex cwr script that tells about this issue. It does seem to correct itself overtime, so i am not too worried at the moment (but still very annoyed).
Also, it seems that many users have been experiencing strange battery problems (such as the phone suddenly losing half of its charge in 3 minutes). I hope it is an software issue (correctable), or just a battery issue (fixable), rather than a hardware issue (hard to fix).
rooting, custom recovery, and unbricking guide (everyone)
if you want to root your phone then follow part a.
If you want to root your phone and add custom recovery then follow parts a and b.
If you have soft bricked your phone, then please complete all steps outlined below (if not already done yet).
The tutorial is done on a windows computer and is meant for a windows computer. Steps will vary slightly or tremendously if it is done on any other os.
part a - rooting the sgh-s730m
1. Download and install unlockroot free on your pc. You do not have to install bloatware!!! Please read setup instructions carefully!!!
2. Download and install samsung usb drivers. If it prompts you to reboot for any reason, then reboot your computer.
3. After all of this is over, you have to prepare yourself for the hardest part of this whole process, and maybe the most complicated dilemma you will ever face in the entirety of your lives.
4. Turn on your phone if it isn't already. Wait for the phone to fully boot.
5. Plug your phone into the computer via usb.
6. Run unlockroot on your computer and click the "root" button (when it prompts you to install bloatware apps on your device, say no).
do not unplug your phone until unlockroot says it is ok to do so!!!!
congratulations, you have should now have a rooted sgh-730m in proximity to your hands! :fingers-crossed:
how to verify your 730m is rooted if by any reason, you feel unsure as to if your phone is actually rooted or not:
install a root checking app.
these apps will tell you if your phone has root access or not.
Try root checker from the google play store.
install a terminal emulation app.
in these apps, type the command "su" (without quotes). If you get "permission denied" you have not rooted your device. If it prompts you for root privileges (ie a popup appears) then your device is rooted!
Try terminal emulator from the google play store.
If you are a n00b (like me occasionally), and you fail to understand why something works, or, the exact opposite: Don't worry! You probably thought the auxiliary headphone jack was the usb port, or, thought you should unplug your phone early, despite me warning you not to do that. That's okay, you can get it fixed.
part b - installing a custom recovery
you must root your phone before you do this!!!!!
1. Download either the sgh_s730m.cwm_6.0.3.1.custom.recovery.tar.zip or the sgh_s730m.twrp_2.5.0.0.custom.recovery.tar.zip file, and extract its contents to your desktop (if you don’t know what a desktop is, then please leave. You will probably break your device).
2. Then, download the odin flashing program attached to this post. Extract its contents to wherever you find necessary.
3. Right click on odin, and click “run as administrator†(if available).
4. Click on the pda button
5. When the file window appears, browse to the desktop directory (your desktop) and select either the s730m-cwr.tar.md5 or the s730m-twrp.tar.md5 (depending on what version you downloaded).
6. Now shutdown your phone. Plug your phone into your computer. Boot into download mode by turning on the phone (release the power button as the phone vibrates) and holding the lower volume button and home key. Follow the instructions (press the upper volume button) to continue with download mode.
7. If your phone has been detected by odin, the proceed.
8. Inside of odin, press the start button.
do not disconnect, unplug, play with any buttons, or click anything on either the phone or computer until odin has finished flashing clockwork recovery on your phone.
8. To boot into clockwork recovery, hold down the upper volume and power key until the first vibration, then just hold the volume key.
That should be it! :highfive:
part c - soft brick recovery (cwm recovery only!)
you must have a micro sd card with at least 400 mb of free storage space to do this!
build.prop restore script
you need busybox installed on your phone in order to use this script! If you dont have busybox, it wont work.
if you messed up your build.prop file (if you did, then you will know that you did), then you can use this script to restore you build.prop file to the original stock format.
1. Download the build.prop restore script, to your device (preferably a computer).
2. Place the zip file to the root (/) directory of your micro sd card.
3. Remove the sd card from the computer, and turn off the sgh-s730m.
4. Remove the back plating from the phone, and insert the micro sd card into the phone. It should be named sgh-s730m cwr stock build.prop.
5. After putting the phone back together, boot into recovery by holding down the upper volume and power key until the first vibration, then just hold the volume key.
6. Using the volume buttons as scrolling keys, scroll down using the lower volume until you see install zip from sdcard as highlighted text. Using the power key as the enter button, click the power button.
7. Then, also using the volume keys, scroll down to the choose zip from sdcard option, and click the power button.
8. If you placed the zip file exactly where i told you to: You should see sgh-s730m cwr stock build.prop as an item. Scroll down to the file and click the power button. Then, when it prompts you to "confirm install", scroll down to "yes - install".
9. Press the power button.
wait for the phone to be 100% done executing the scrip! You could mess up the phone. Do not turn off the phone.
full restore (if all else fails)
to reduce confusion, please remove any backups that you may already have (which would be funny, you wouldnt have to do this anyways).
1. Download the rooted stock cwm recovery image (.zip) i made from here, to your device (preferably a computer).
2. Extract all of the contents of the zip file to the root (/) directory of your micro sd card. The folder should be named "clockworkrecovery".
3. Remove the sd card from the computer, and turn off the sgh-s730m.
4. Remove the back plating from the phone, and insert the micro sd card into the phone.
5. After putting the phone back together, boot into recovery by holding down the upper volume and power key until the first vibration, then just hold the volume key.
6. Using the volume buttons as scrolling keys, scroll down using the lower volume until you see backup and restore as highlighted text. Using the power key as the enter button, hit the power button.
7. Then, also using the volume keys, scroll down to the restore option, and click the power button.
8. If you extracted the zip file the exact way i told you to: You should see a menu option. If you didn't do what i told you to, you may see "no files found". If it says "cant mound /sd" (or something similar), you probably have a bad sd card, or, forgot to put it in correctly.
9. Press the power button.
wait for the phone to be 100% done restoring your backup to the phone! You could hard brick the phone (because cwm recovery writes to the bootloader). Do not turn off the phone. The phone is not frozen if it wont respond for a while.
10. If you did this correctly, you should have a rooted, and restored sgh-s730m!
part d - soft brick recovery (twrp recovery only!)coming soon..
part e - removing that annoying triangle from the boot sequence..to a thread near you! (it's already here. I'm just organizing them so it is easier to understand and to use)
deodexing, overclocking and modding (developers only)
deodexing you rom
you must have a micro sd card with at least 100 mb of free storage space to do this!
so, after some work (and tons of patience), i managed to make a deodexed version of this phone. So, ive made a deodex script for cwr, that will remove you old /system/app and /system/framework directories, and makes new ones, with the new deodexed files.*
now, since this is considered a more "advanced" tweak, i am not going to post a step-by-step guide on how to do this.
Why? Well, if you really needed instructions to do this: You probably shouldn't be doing it anyways!
For developers: Make sure you have busybox installed, then install the zip here via cwr (its easy to see what file it is). Remember to wipe dalvik cache. There are some temporary bugs with the samsungime.apk, which wont work right for a while. Mysteriously though, the problem corrects itself after some time using the phone. Reply your findings!
For noobs: Don't do this, it will just make no difference, and i honestly don't feel like solving problems that don't need to be solved (or, ones due to illiteracy). Wait until you know what you are doing (and what an odex file is), then try this yourself.
system mods
if you don't know what you are doing, then, please don't read any further. Its for your own good
the csc directory can be deleted (and the files in the main /system directory that are associated with it). It does not affect the phone at all.
Also, if you go to /system/etc/feature_default.xml you can change the phones features. So far, i have done many tweaks to the messaging, phone, settings, people (contacts) and lock screen of the phone! If you are a devleloper (or tweaker like me), you should be able to enable/disable whatever you like using the feature_default.xml.
overclocking
fitamp has made a overclocking script for 1ghz (1000mhz). There is quite a noticeable difference in response, but, the phone still tends to lag a bit. File is attatched to the thread (s730m-oc-1000mhz.zip)
please click :good: If it works for you!
Click to expand...
Click to collapse
and where is the odin did you the number
thanks
manuelelitaliano said:
and where is the odin did you the number
thanks
Click to expand...
Click to collapse
Hi there,
Sorry for the late reply. I've been quite busy lately.
http://forum.xda-developers.com/showthread.php?t=2189539
^ That thread has the downloads for Odin.
???
Hey guys,
have we found a way to fix my problem with the phone, I still have no access to download, recovery, normal boot and it stays on for 7 secs max. This has ocured because I flashed the wrong file to modem. Let me know as I want to start working on development again.
camvar97 said:
Hey guys,
it stays on for 7 secs max.
Click to expand...
Click to collapse
^ That, to me looks like the battery is not charged (unless I am wrong).
camvar97 said:
Hey guys,
... I still have no access to download, recovery, normal boot and it stays on for 7 secs max. ... This has ocured because I flashed the wrong file to modem.
Click to expand...
Click to collapse
I've searched around a bit, and the best option would be to send it for repair IMO.
shifattk said:
^ That, to me looks like the battery is not charged (unless I am wrong).
I've searched around a bit, and the best option would be to send it for repair IMO.
Click to expand...
Click to collapse
as for the battery thats what samsung says might be the problem and that i need a new one
SGH-730G Users ONLY
Here is a thread I started this morning about the SGH-730G (Tracfone, Net10, Straight Talk) variant of the Discover. I created this thread so there wouldn't be confusions due to the slight differences between the 730G and the 730M variants. Right now there is a root method listed, and I am working on an Odin flashable recovery from soft brick. I will also be posting things that I have figured out so far, and in the next day or so a full deodexed version of the stock firmware. Coming later will be a custom rom. If anyone in this thread has dev experience and has the 730M variant, PM me about this custom rom as I would like to make it compatible with both versions of the phone but will have to work out the differences between the two to make it fully compatible. New thread for the 730G - http://forum.xda-developers.com/showthread.php?p=47417608
TheGeekyNimrod said:
Here is a thread I started this morning about the SGH-730G (Tracfone, Net10, Straight Talk) variant of the Discover. I created this thread so there wouldn't be confusions due to the slight differences between the 730G and the 730M variants. Right now there is a root method listed, and I am working on an Odin flashable recovery from soft brick. I will also be posting things that I have figured out so far, and in the next day or so a full deodexed version of the stock firmware. Coming later will be a custom rom. If anyone in this thread has dev experience and has the 730M variant, PM me about this custom rom as I would like to make it compatible with both versions of the phone but will have to work out the differences between the two to make it fully compatible. New thread for the 730G - http://forum.xda-developers.com/showthread.php?p=47417608
Click to expand...
Click to collapse
I've added a link to your thread to the original post such that people don't get confused and/or break their phones. Thank you fore making the thread.
shifattk said:
I've added a link to your thread to the original post such that people don't get confused and/or break their phones. Thank you fore making the thread.
Click to expand...
Click to collapse
Word. I know some people were confused in another thread. Root methods are basically the same but there are structual differences between them when it comes to mounting points for restore and such. Thanks for addinthe link to the OP. I'll go back in a few and add a link here in my OP for the same purpose.
Does anyone know how to carrier unlock for this phone yet.
question?when i try to install CMW it keeps failing nand rite mode and restarting! any solution or different ay to try,still showing stock recovery but rooted!
Hello guys is there any way to unroot??? thanks
alexandros050 said:
Hello guys is there any way to unroot??? thanks
Click to expand...
Click to collapse
You can use unlockroot software to unroot.
I tested rooted and unrooted.
x1745 said:
You can use unlockroot software to unroot.
I tested rooted and unrooted.
Click to expand...
Click to collapse
Ok thank you very much for your reply
Take a look at This, I've created a flashable zip that both roots the phone and installs the overclock kernel found in this thread. Thought you might be interested
edit: I also just posted a flashable stock rom here. it's deodexed, rooted, and overclocked.
Restl3ss said:
Take a look at This, I've created a flashable zip that both roots the phone and installs the overclock kernel found in this thread. Thought you might be interested
edit: I also just posted a flashable stock rom here. it's deodexed, rooted, and overclocked.
Click to expand...
Click to collapse
I tried flashing your ROM, get error status 255, installation aborted...
shifattk said:
The Script it attached to this post.
Procedures (using ADB)
put boot.img on sdcard:
adb push boot.img /sdcard/boot.img
Then, from adbshell:
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
then reboot device.
Click to expand...
Click to collapse
Phone wont boot past samsung logo after this. Followed your instructions exactly
atmu5fear said:
Phone wont boot past samsung logo after this. Followed your instructions exactly
Click to expand...
Click to collapse
Did you make a CWM backup before doing it? If you did, boot into CWM recovery and flash the recovery package.