Develop Bugs

OTA does not work

I have a Dutch HTC Desire, English language.
When I check for an update I get the message there is one available.
I see the download was completed and it restarts my Desire.
I see a screen with a phone and arrow, followed by a phone with a question mark.
Then the phone restarts and I have the 'old' version.
Is it that I have a rooted version?
What do I have to do to get FroYo? I downloaded PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_12984_signed.zip.
When 'Flash zip from sdcard' it also gave an error:
(bad)
Installation aborted.
Anyone a suggestion?

im having the same probem. downloads the update, restarts but still on the previous version. when i goto software check it shows there is still an update available

tembares said:
I have a Dutch HTC Desire, English language.
When I check for an update I get the message there is one available.
I see the download was completed and it restarts my Desire.
I see a screen with a phone and arrow, followed by a phone with a question mark.
Then the phone restarts and I have the 'old' version.
Is it that I have a rooted version?
What do I have to do to get FroYo? I downloaded PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_12984_signed.zip.
When 'Flash zip from sdcard' it also gave an error:
(bad)
Installation aborted.
Anyone a suggestion?
Click to expand...
Click to collapse
Yeah, root is probably the problem.
It's not FroYo though, it's just a bunch of minor changes and bugfixes. Also, it's not that new, it's been out unoffically for a couple of weeks. A lot of the custom roms on here and on modaco are based on the same 1.21 rom and will allow you to keep root and apps2sd. So you could flash to one of those, maybe?

I don't think this is the Froyo update. Apparently it's just an HTC update of some kind that doesn't make much of a change. Just keep trying, but in the mean time don't stress too much, you're not missing out on anything.

o really? so i cant install the OTA updates if i have root? that really sux and if i had known that when i flashed i wouldnt have done it.
i might reflash to this version as i want it for the facebook contacts bug fix. i dont have apps2sd as as far as im aware thats regulary bricking phones, that still the case?

Couldn't say. The Desire root was so half-assed and seemed to cause so many issues that I just didn't bother doing it, so I'm just going by what I've read

ok, well is it possible to do an update without having to flash and therefore resetup and backup all my settings etc? i.e. in the same way the OTA update would do it without resetting the device

gyro11 said:
o really? so i cant install the OTA updates if i have root? that really sux and if i had known that when i flashed i wouldnt have done it.
i might reflash to this version as i want it for the facebook contacts bug fix. i dont have apps2sd as as far as im aware thats regulary bricking phones, that still the case?
Click to expand...
Click to collapse
The usb brick issue now has a fix available, and it wasn't due to a2sd!

really, thats excellent, u have a link?

Yep.
http://forum.xda-developers.com/showthread.php?t=691639
The recovery method was causing the problems. It still does, but they can now be fixed. people are working on the recovery and booting from SD card etc.
Edit: If you fancy trying out froyo on the desire you can flash a test rom from the dev forums. It's not for everyone yet as it's not totally working, but I'm using a froyo rom and find it's pretty decent for a hacked version!

gyro11 said:
o really? so i cant install the OTA updates if i have root? that really sux and if i had known that when i flashed i wouldnt have done it.
Click to expand...
Click to collapse
A rather strange point of view!
Most rooted users wouldn't want to install an OTA because they would then lose root. On other phones (e.g. G1, Magic etc) most rooted ROMs have the OTA mechanism disabled.
The normal course of action for rooted users is to wait for someone to repack the update as a rooted update.zip.
Regards,
Dave

Cannot update to V10j firmware via OTA

My E975 is rooted (not boot unlocked), I can download this update and the device restarts, then after a short time an error message comes up, the device restarts and loads as normal, then a message pops up that states root suspected, so cannot update
This appears to be a protective mechanism against rooting, so updates are only available for unrooted devices
Now, the solution seems simple, I unroot, update and then root again, however, I suspect it's not this simple
Can someone please advise if there is a workaround or would the simple option work?
As I don't want to lose root
Thank you

This solution has been suggested - http://forum.xda-developers.com/showthread.php?t=2625044
Which seems like much work for a small update
Is there any other method?

Current Software Version: Stock JB 4.1.2 (E97510h-EUR-XX)
I've unrooted and made sure there is no trace left, have restarted the device, then downloaded the V10J update via OTA, ran the update process, got to the update screen and at 3% progress get error 0x13E, device restarts and there is another error message that states:
- Software update, problem with installation
Have tried to update OTA 3 times and the issue is the same each time, I wonder if this is the same issue as last year on the AT&T version:
- http://forum.xda-developers.com/showthread.php?t=2223994
- http://forum.xda-developers.com/showthread.php?t=2084211&page=2
Also on other versions too:
- http://forum.xda-developers.com/showthread.php?t=2051819
- http://forum.xda-developers.com/showthread.php?t=2289930
If anyone can help or hopefully explain what the error 0x13E is cause by/relates to?
Please reply here and it will be much appreciated :good:

Current Software Version: Stock JB 4.1.2 (E97510j-EUR-XX)
Gave up on OTA, soft bricked my device shortly after and used the KDZ Updater method from the FAQ (http://forum.xda-developers.com/showthread.php?t=2434917), which updated my device, so I'm going to leave it there for now
Also, if anyone is wondering (like I was), yes, stock JB 4.1.2 (E97510j-EUR-XX) can be rooted via Framaroot, using the gandalf exploit and I had no related issues
Thank you :good:

Update not updating phone!

I'm with rogers, phone version is 4.4.3 trying to update to 5.0. Phone is root and s-off
So, I'm having a new problem with updating the phone, I've had it before, and a member of this website helped me out with a TWRP recovery which did the trick. I've also looked over some posts with people have the same problem, a member said to turn USB debugging off. I did that, and tried the update again but not change. I get not change with the new update from 4.4.3 to 5.0, like I said, I've had this problem before with 4.x.x or what ever my version was back then. I'll go through the update with success but the update does not apply.
Any thoughts on this? I'm updating by renaming the zip file and running the update through bootloader. I've also tried doing it though ADB.
Thank you,
SpaceGold
Edit:
Seems like I got the update working just by installing AR HD.

[Australia] HTC 10 Australian

Hi guys,
I got my HTC 10 last week - phone is a big improvement from the m8.
I am running Telstra's latest firmware - Have s-off already...
Telstra's latest firmware is 1.53.841.6 with Leedroid ROM - have been trying to get VOLTE.
I never got VOLTE with stock because I rooted so fast and S-OFF and installed custom ROMs.
So I had to install stock system image 1.53.841.6, reinstall stock recovery and factory reset and VOLTE icon shows up instantly. Install TWRP and VOLTE remains. But if you install a custom rom and do a full wipe seem to lose VOLTE. Also have to have the telstra firmware to VOLTE to work, I tried with WWE and no go. Also had to ring up telstra as it wasn't activated. So if you are having trouble getting it - might be best to double check. Even though my provisioned flag was on. *#*#4636#*#* to check - tap phone info.
@xlrate reported not wiping data and installing VIPER was able to keep VOLTE. (Updated the customize folder in the rom with my Telstra back up, also the build prop to do this) Also TELST001 cid has to be on.
Has anyone got VOLTE working on a custom ROM on WWE Firmware?
So Aussies... Who's got their new HTC 10?
Update - 15/10/16
Thanks to @brantp for providing TWRP backups & OTAs
https://drive.google.com/drive/folders/0B6MWrHVBWC-xZlBQN1BqYUNPRW8
TWRP Backup (untouched System Image + Boot)
- 1.21.841.8 (+ Recovery)
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
Stock Recovery
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
OTA
1.21.841.8 --> 1.53.841.6
1.53.841.6 --> 1.80.841.1
1.80.841.1 --> 1.95.841.3
Firmwares- Refer to http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520 for more info
https://docs.google.com/spreadsheets/d/1EdAHLDDxqf9jH65me_8bY9oXdaYusI0eedpwO6yUY2s/pubhtml
Thanks to @Sneakyghost
Roms- Leedroid, ICE and Viper now support Telstra with carrier support.
If anyone has any of the other australian carriers firmware please post and I will add them to OP.
15/08/16
https://www.androidfilehost.com/?w=files&flid=60869
Telstra RUU provided by @Sneakyghost - Will restore OTA's if anyone has broken them
12/03/18
Telstra OREO update
http://fotadl-az.htc.com/secure/OTA....48.841.31_release_519847tp9bagwfkglchg5u.zip
@Sneakyghost isn't doing the firmware updates anymore.
If you need to use the firmware.zip out of the OREO zip and need to a custom recovery either replace the recovery.img with twrp.img (rename it of course) in the firmware.zip - or flash one after installation.

I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?

Vampyric said:
I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?
Click to expand...
Click to collapse
I have had VoLTE working with Leedroid after I used the telstra 1.53 system/customize & parts of the build.prop on the 1.30 base... Haven't been able to get it working on 1.80 base.
Have had to use the telstra firmware for it work, doesn't work on WWE. So it is kinda a pain to get working.
VoLTE is better call quality and if you are on a call you can use LTE/4g to use the internet... Without VoLTE when on calls your phone 3g
EDIT - don't think OTA will work since you are rooted unless you went systemless root

I guess I don't 'appreciate' VoLTE as much as I should, because I rarely make phone calls..
Sadly, not Systemless root. So, I think I need to go back to stock, update and re-root. It's not something I've had to worry about before. So, it's kinda frustrating, and a little too complicated for me to totally understand.
I was going to de-brand it, and just run the WWE RUU.. But, maybe I'll wait for the 1.80 Telstra update and worry about it then.
I got rid of the notification
**Sent from a uranium powered typewriter**

Anyone experiencing an issue with NFC? While on stock 1.21.841.8 (and locked), worked without issue. Since updating to 1.53.841.6 (and unlocked), can't read my Opal card now ie no vibration, no sound, no anything. Haven't tested my tap & pay banking app yet (which did work without issue prior to updating).

Yes I also had and issue with NFC. Would not read opal card and was an absolute pain to try and read my Amex and Visa card.
Ended up getting another issue with it and returned the phone under warranty for NFC and the other issue.
Still waiting to get a phone back ?
Sent from my HTC One_M8 using Tapatalk

Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......

pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.

xlrate said:
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.
Click to expand...
Click to collapse
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it

yldlj said:
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it
Click to expand...
Click to collapse
Tried reflashing the 1.53 firmware again (twice) to see if it fixes it, but it's still not working ie Can switch it on and off, but it does not respond to my opal card.
It's only taken Telstra until this month to push out 1.53, so who knows when (or if) 1.80 will happen. Now I'm trying to decide whether it's worth sending back for another handset or waiting to see if the next OTA will fix it. My biggest concern is that the replacement could be on 1.21 and I could possibly end up with the same issue all over again!

pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
I just tried to NFC on 1.53 and it isn't working very well, hardly at all. I got it to work 3 times in about 15 mins...
Previously I think when I was on 1.30 firmware it was working well before but just had to hold it near the head phone jack.
Any Telstra users want to test out the Telstra firmwares
http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
Make sure you back-up the rom & back up internal storage refer to later posts in that thread.

https://crowdsupport.telstra.com.au/t5/Device-Updates/Software-Updates-01-07-2016/td-p/585953 Telstra 1.80.841.8 firmware is coming 25-Jul
Leedroid is the best rom for Telstra users. Running it myself and working perfectly, now supports Telstra with carrier support & VoLTE working - thanks @LeeDroid
*Only works on Telstra firmware.

Install Ice yesterday (only got my phone Friday ), really like it over the stock rom.
Some people complained about the LED but I like it. My only complaint about my M8 was how bright the LED was specially in the dark when you're trying to get to sleep.
Another problem I'm having is file transfers freeze when using a USB 2 port on Windows 10.
I like my new M10 but not sure if I like it over the M8 as of yet. I preferred the speaker arrangement on the M8 and having the home, back buttons etc on the screen rather then down the bottom.
I have to admit I'm not a fan of the "Samsung" look at all which is why I bought HTC in the past to begin with. I didn't want to be a part of the flock.

Hey guys,
I'm looking to get the 10 but imported, could someone (especially looking for someone with Optus) check their box to see what specific model it is (e.g. 10h or 10u)?
Thanks guys

The Telstra model is a HTC 10h

ICE (InsertCoin) v2.0.6 supports Telstra also now too. Thanks @baadnewz

morgy59 said:
The Telstra model is a HTC 10h
Click to expand...
Click to collapse
Awesome, thanks morgy59

Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?

brantp said:
Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?
Click to expand...
Click to collapse
I found it worked perfectly fine on wwe 1.30 firmware using Leedroid. Now I'm on 1.53, hardly works at all
Sent from my SM-P605 using Tapatalk

It's doesn't read card on 1.53 on Optus build 710

Having so many issues since trying to Flash LeeDroid ROM

Hi all,
I have the EE UK HTC 10.
Managed to get TWRP and SuperSU flashed fine and rebooted into system with no problems.
Copied over the LeeDroid Latest ROM, I forgot to address the firmware issue, so the one I'm running is older than the ROM's one. Causing my fingerprint sensor/home button to stop working...
I've been looking around thee internet for hours now and cannot find the RUU for my UK EE HTC 10 to be able to update the Firmware, and in general cannot find any way to update Firmware now.
Can someone please help? I'm not a complete noob to this, just haven't messed with Root and so on in a few years. (Not had the time, lol.)

corydor13 said:
Hi all,
I have the EE UK HTC 10.
Managed to get TWRP and SuperSU flashed fine and rebooted into system with no problems.
Copied over the LeeDroid Latest ROM, I forgot to address the firmware issue, so the one I'm running is older than the ROM's one. Causing my fingerprint sensor/home button to stop working...
I've been looking around thee internet for hours now and cannot find the RUU for my UK EE HTC 10 to be able to update the Firmware, and in general cannot find any way to update Firmware now.
Can someone please help? I'm not a complete noob to this, just haven't messed with Root and so on in a few years. (Not had the time, lol.)
Click to expand...
Click to collapse
Do you have a backup of your stock rom? If so flash that and see if you can upgrade using the official OTA.
Else, check out this thread for firmwares, on the last couple pages there are a bunch of versions posted.
https://forum.xda-developers.com/ht...-collection-recovery-ruu-ota-t3359297/page183
Also, from a couple threads below yours:
https://forum.xda-developers.com/htc-10/help/home-button-fingerprint-doesnt-nougat-t3558961

corydor13 said:
Hi all,
I have the EE UK HTC 10.
Managed to get TWRP and SuperSU flashed fine and rebooted into system with no problems.
Copied over the LeeDroid Latest ROM, I forgot to address the firmware issue, so the one I'm running is older than the ROM's one. Causing my fingerprint sensor/home button to stop working...
I've been looking around thee internet for hours now and cannot find the RUU for my UK EE HTC 10 to be able to update the Firmware, and in general cannot find any way to update Firmware now.
Can someone please help? I'm not a complete noob to this, just haven't messed with Root and so on in a few years. (Not had the time, lol.)
Click to expand...
Click to collapse
Read the aroma installer. Install the rom again and when you get the question on what firmware you are, select marshmallow firmware. The fingerprint and home button will work again.

Mr Hofs said:
Read the aroma installer. Install the rom again and when you get the question on what firmware you are, select marshmallow firmware. The fingerprint and home button will work again.
Click to expand...
Click to collapse
Yeah, sorry mate. I thought it was asking which version of the OS I want to install. LOL.
Thanks for that though! :good: