Related
ok so here is mine i have used. i will call this liverpool Champions league winners
1- date
2- weather panel
3- sbp gprs monitor
4- sbp pocket plus
5- spacer
6- today player
oh and i used CEcapture its free you should find it at www.limelink.com
Boring old today screen, fine-tuned for efficiency
Cool idea & nice today screen.
Mine's a totally different approach. I tried all kinds of backgrounds, but found that photo's make the text hard to read, so eventually I came back to the boring old default blue one... I expanded it to the top and bottom of the screen.
Wisbar
Pocketbreeze
Battery bar pro
Weatherpanel (in Pocketbreeze tab)
My Today screen is all about information. I want my appointments, tasks and mail notifications to be clearly readable, with important items highlighted, yet easy on the eyes - no fluorescent stuff for me. Notice the carefully chosen text colors and the everso subtle hint of font shading to make it stand out. 8) (ok I know, I'm so full of it... :roll: )
The icon console in the Wisbar top bar is my own design. I tried to make it as compact as possible, to allow for a lot of running program icons next to the start button.
There's four scrollable rows of program shortcuts in the Program bar.
Might experiment with skinning a little more, it's fun.
i like the wisbar plug-in do you know where i can get it for free :wink:
Wisbar
i too liked the wisbar one where can i find it !!!
or is there any one who would like to share it
Re: Wisbar
spread_smiles said:
i too liked the wisbar one where can i find it !!!
or is there any one who would like to share it
Click to expand...
Click to collapse
Google for "Wisbar pda"
The 1st link will take you to it.. It's freeware
OK.. I will help you: http://www.pdagold.com/software/detail.asp?s=76
-N
dosent work
thanks for the link but it dosent work for WM2003
bad luck
it says invalid ppc program
got another or on which windows are you useing it !!
Re: dosent work
spread_smiles said:
thanks for the link but it dosent work for WM2003
bad luck
it says invalid ppc program
got another or on which windows are you useing it !!
Click to expand...
Click to collapse
Works fine on my WM2003
where do you go to change the settings ????????????/
does anyone have a good windows mobile 5 ppc theme? or at least close to one?
Try this, its already optimized for PocketPlus.
I'm bored, so might as well post my new creation as well.
Juni's SWDeluxe Skin Suite v3.0
Juni's modified Chromium
Quickie question, those that have the task bar skinned...what app are you using to skin the notfication button and signal strength? Haven't found anything that works on the XV6600.
I'll post my today screen when I get home:
Date
SPB PocketPlus with Weather tabbed
SPB Diary
Messages
SPB 'Sphere' theme
I like my Today with plain black background. It's easier for me to read !!
Big Calhoun said:
what app are you using to skin the notfication button and signal strength?
Click to expand...
Click to collapse
It's Wisbar Advance 2. Skinning it yourself is not too difficult; I made my taskbar and taskbar icons with Photoshop. But there's plenty of cool skins available, like the ones from Juni.
I've found that with Wisbar Advance 2.0, my resources are very low and it slows down the entire ppc. Anybody else with this problem? I love the various looks I can make, but because of it being so memory intensive, I've opted, for now, to not run it.
I'm with rsbenedict on this one. I've tried wisbar a few times, but it always seems to slow my device to a crawl. Has it improved recently?
WISBAR has been improved, try it for me no slowdowns
Skinners are getting better and better. I personally like this one as it matches my unit casing.
Hey Nomadman, what app are you using to pick up the news story?
Q.
I'm assuming the Orbits Shortcuts item on the Today screen is to add icons
a bit like spb Pocket plus
I can't see where to add them though, options is greyed out on Today settings and there's no context menu either
am I missing something?
thanks for any help in advance
took me a while to work this out:
click 'options' on the o2 close apps thingy that resides on the bottom right of the today screen next to the battery level and comm manager shortcuts.
Hope this helps.
Thats the one
cheers
i have 2 white icons that are not shortcuts to anything and i cannot get rid of them anyone any ideas ?
icon not there
I dont know what this icon should look like, but I cant find anything in my "tray". There is only ActiveSync,Battery-charging,trun disply, conn manager and Quick GPS.
I use Orbit with O2 (german)
Any ideas? Or can you post a scrrenshot?
Hi everyone, I just got a XDA Orbit to replace a XDA Atom Exec+bluetooth gps.
So far so good, hard to believe this device is almost as fast as a 512Mhz one..
I've installed everything I had on the Atom but since the Orbit has a little bar at the bottom with a battery indicator and an icon to lauch the comm manager my today screen doesn't fit and I get an annoying scroll bar on the right hand side.
Is there any way to remove the bottom bar? I don't really need it.
Thanks.
On my Orbit, the menu item shows icons for :-
Battery / Screen Rotate / Comm Manager / Brightness / GPS update / Mouse
Is this the same on yours? If so;
Start
Settings
Today
Items tab
Look for "HTCHomeplug" (on my device anyway)
Untick
Jeff
Thanks Jeff, but I don't have anything like that on the items list under today settings. The only selected are Spb Mobile Shell, Pocket Plus and Spb Diary. The same I used to have in the atom.
Very annoying bar..
Hi.. You can use this free app :
http://www.freewarepocketpc.net/ppc-download-htcustom-v1-1.html
HTCustom is a little application to tweak and customize WM5/6 devices to their owners content. Whats Good? - Thin Scroll Bars - Short Scroll Arrows - Live Searches Via Google - Remove battery/comm manager from tray - Clock Display (clock, date, nothing, both, battery) - Enable Time Zones .
I havn't tried it so not sure it's exactly what you need
Cheers
Thanks, but unfortunately didn't work, got an error message.
I finally got rid of it by hard-restarting it and soft restarting when I got the message saying the o2 software was about to install.
I hope I didn't miss anything by doing this. Seems like a clean device now, no custom apps in it.
Is it possible to have a smaller grid of icons on the HTC traditional QVGA (240 x 320 ) screen?, so that more applications can show at once on the programs or settings window, without scrolling.
For the VGA type screens there is an application called 'trueVGA' that scales the icons and taskbar etc, so that it utilizes the whole vga screen.
For our QVGA screen it might just be a registry + type of cooked ROM that might enable this.
Is it even possible ??? ???
i use quickmenu, its not exactly the solution you are looking for but its somewhat does wat you want. it replaces the start menu with a cascading style start menu, so i can have all my programs, settings in there.......oh, and its free
Picture attached
XtreMe_G said:
i use quickmenu, its not exactly the solution you are looking for but its somewhat does wat you want. it replaces the start menu with a cascading style start menu, so i can have all my programs, settings in there.......oh, and its free
Click to expand...
Click to collapse
Oh thank's but i also have quickmenu too, i mean something quite different from the startmenu. i edited a picture, just to show what i mean.
TouchFlo Detacher is yet another way to simultaneously have TouchFlo 3D and the regular Today screen. Previous excellent solutions include SecondToday and ManilaControl.
Description
So what makes it different? Well, this app is actually very similar to MastSogo's ManilaControl. The main difference is that the author plans to actively develop it for a while, whereas ManilaControl has been a bit frozen in development for a few months. It is also open source, licensed under the Ms-RL. The program is on CodePlex, so download speeds should be much better than the average rapidshare link. Finally, it is in English and not Spanish. Other than that, it's just another solution for the same problem!
See it in action on the YouTubes
http://www.youtube.com/watch?v=uk0xWm8PMGQ
Download the CAB and source code here: http://www.codeplex.com/TFDetacher
Installation
As explained on CodePlex...
1. Install the CAB
2. Run the configuration app
3. Enable all the standard Today Items you want to use
4. Do not re-enable TouchFlo 3D in the Today items (if you do, it will undo all your other Today plugins)
Requirements
Windows Mobile 6.1
.Net Compact Framework 2.0
A device that runs TouchFlo3D / Manila
Current features
- Free up your Today screen by hosting Manila outside of the Today screen! TouchFlo Detacher can launch/show/hide/close Manila independent of any other Today screen settings. Now you can have your TouchFlo cake and eat it too! The most obvious use is to assign a soft key to toggle between seeing TouchFlo and seeing the regular Today screen.
- Service runs as a background application (in your StartUp folder) for maximum speed when toggling Manila modes.
- NO ANNOYING SPLASH SCREEN when application launches.
- Service is 100% idle when not receiving messages or controlling TouchFlo, so no CPU is wasted! (Just a tiny bit of RAM)
- Configuration application allows modifying manila.exe location, manila window class, and more, so that this utility can (presumably) be used with other manila versions (such as TouchFlo 2D). This is untested. Out of the box, it supports TouchFlo 3D in its default configuration as seen on the Diamond/Pro/HD.
- Configuration application can clean out the ManilaActivateToday.exe from the notification queue. (That app can interefere with TouchFlo Detacher's operation.)
- Shortcuts to start/show Manila, hide Manila, and close Manila. These can be assigned to hardware buttons (if your device has them) or virtual hardware buttons through the use of 3rd party applications such as AE Button Plus.
- Configuration application can customize the softkeys in both Today and TouchFlo's Home tab. You can use it to not only assign TouchFlo Detacher operations (show/hide/close), but any other application on your device.
I want only to say many thanks for that cab it works very good on my Touch HD ... Great App cardefbel
THE best piece of software I've downloaded. Used it on both Touch Diamond and Touch HD and love it!
Perfect - thanks
Thanks for this awesome app....
Would I be correct in thinking that with your app I can go all out on WAD2 or something and still be able to switch back and forth between WAD2 and Touchflo without all the hassle?
Thanks. Downloaded, installed, and be able to switch between TF3D and my old style today with Spb Diary.
jacklam said:
Would I be correct in thinking that with your app I can go all out on WAD2 or something and still be able to switch back and forth between WAD2 and Touchflo without all the hassle?
Click to expand...
Click to collapse
This is not my application, but I realy love it and would share it with y'all.
Is it also possible to have TF3D together with SPB today screen combined whit SPB mobile shell?
Hi Guys,
i add a screenshoot just to share with you the result of this great app.
i have one question, maybe someone of you have the same problem.
i am running the "non TF3D" screen with Resco today plugin and launcher.....if i try to put a background (via setting Today, use picture as background...) no matter which kind of picture i choose, they are opaque.
cant figure out a solution.
thanks and Ciao!
that app is very great. but i got ine problem that the home icon button dont's work, it just has the force feedback.
giangishanghai said:
Hi Guys,
i add a screenshoot just to share with you the result of this great app.
i have one question, maybe someone of you have the same problem.
i am running the "non TF3D" screen with Resco today plugin and launcher.....if i try to put a background (via setting Today, use picture as background...) no matter which kind of picture i choose, they are opaque.
cant figure out a solution.
thanks and Ciao!
Click to expand...
Click to collapse
hey guy,
can you share with us how you achieve your today screen as you attached?
it is nice.
Sounds great, will keep an eye on this one!
giangishanghai said:
Hi Guys,
i add a screenshoot just to share with you the result of this great app.
i have one question, maybe someone of you have the same problem.
i am running the "non TF3D" screen with Resco today plugin and launcher.....if i try to put a background (via setting Today, use picture as background...) no matter which kind of picture i choose, they are opaque.
cant figure out a solution.
thanks and Ciao!
Click to expand...
Click to collapse
Look at the this thread: http://forum.xda-developers.com/showthread.php?t=468215&highlight=today+background+transparent
It solves your problem.
cardefbel said:
Look at the this thread: http://forum.xda-developers.com/showthread.php?t=468215&highlight=today+background+transparent
It solves your problem.
Click to expand...
Click to collapse
Thanks cardefbel !!!
i can tell that this is the best suggestion i have never got in this forum.
you have got the point at the first shot!!!!!! and i have my second today with a brilliant background.
of course thanks to chaosdefinesorder that playing with the device have found out the problem.
for those are asking about my second today:
Resco today plugin
Resco explorer 2008
that's it.
ciao!
Looks great!
I have tried WAD2 and Spb Mobile Shell and I like many of the things that those things bring that TF3D doesn't. I like them both, but I have not been able to break away from the TF3D which is one of the major factors I purchased the phone. Now I can have my cake and eat it too. We'll give it a shot! Thanks.
Update - I loaded it and it seems to work great. I loaded back my Spb Mobile Shell and seems to be working nicely between. It did take a few tweaks, but it is running fine. One thing however is that when I am back in TF3D my hard home key doesn't work to bring me back to the TF3D home. Any ideas?
Thanks for the program cardefbel but I am having a problem with it....notice that if I'm using the SPB screen it won't go back to TF3D after 15mins.....if I want my TF3D i need to reboot it.....but if I on the TF3D I can swap to SPB anytime.....
absolutely excellent, having my appointments on the screen with a 1 button press to TF3D is awesome
WingZer0n said:
Thanks for the program cardefbel but I am having a problem with it....notice that if I'm using the SPB screen it won't go back to TF3D after 15mins.....if I want my TF3D i need to reboot it.....but if I on the TF3D I can swap to SPB anytime.....
Click to expand...
Click to collapse
Are you using SPB mobile shell or SPB pocket plus. I tried to reproduce it with SPB mobile shell, but the switching to TF3D worked for me after 15 mins.
BTW, it's not a program I wrote, found it on the net and realy liked it.
I have a problem with WEATHER page
I have started the program
il works perfectly BUT
if i go in the weather page, under TF3D, he changes automatically to today.
Any idea ????
mikeputich said:
One thing however is that when I am back in TF3D my hard home key doesn't work to bring me back to the TF3D home. Any ideas?
Click to expand...
Click to collapse
Same issue here .. If anyone has a key..
I prefer to have this button for TF3D Home instead of going back to Today