TP2 radio to bluetooth speakers - Touch Pro2, Tilt 2 Windows Mobile General

any1 know if there's any way to listen radio on a bluetooth speakers?
I have Nokia Bluetooth Speakers MD7W but when i select speakers output on TP2 in radio app, it uses phone speakers not external speakers.
thanks

select your BT-Speakers as Headset. then it should work.
i have the jabra bt3030 which supports a2dp and i allways have to select it as headset to make it running.
good luck

can u tell me please how to do that? i cannot find any settings to set it as u told me.
is there any special app for this? or is in phone settings, coz i cant find it.
thanks

so is there anything i can do?
thanks

Your should be able to access the Bluetooth settings by going to:
Comm Manager>Settings>Bluetooth
Then you need to pair the BT speakers to your phone. The phone will take you through the steps, and its pretty self explanatory. The speakers should have instructions on how to pair them. There is usually some button you need to press on the BT device to put it into pairing mode.

i have wm 6.5, when i turn on phone bt and speakers, nokia md7w automatically appear on bt menu and after i selet it pass is required...and than it connect as stereo audio. Thats all, no other settings can be done, other that changing the name.

Related

Motorola HT820 bluetooth stereo headset problems.

I've recently acquired one of these headsets and have managed 2 pair it with my O2 XDA II mini. However, i am unable to stream music to the headset but am able to answer calls and make them too. Does anyone know how i could stream music from my phone to my headset?
if you check in the forum for your pda, i believe you will find you have to upgrade your bluetooth software?
then you will find new menu's in the bluetooth settings including audio/audio streaming.
have the headphones, and am very pleased
already have da software
Hey, i already have the software but the thing is nothing appears in the box labelled "default headset" even after i have paired the device with my XDA. And whenever i try 2 stream music, it initially says connecting but eventually the connection fails and the music does not stream to my headset. Does anyone know how i can get the headset to appear in the default headset drop down box?
when you paired the h/set & phone, what choices did you get?
When I turn my headphones on, my handsfree part pairs but my stereo part won't pair automatically, usually. I just connect it manually, but sometimes it won't just connect so I have to disconnect the handsfree part before I connect the stereo part then reconnect the handsfree part. Occassionally, I have to repeat more than once.
Pair it to the device you want stereo from, start the default "Headset" system for normal talking, press the left multifunction to terminate the connection to the "headset" profile, then press the right multifunction button to trigger the "stereo headset" profile to start.
Or, try to force it after pairing and then press the rightmultifunction to accept the connection and have the device bind that call to that function, enabling and disabling the stereo data.
I had to do the first part with my new HP iPAQ hx2495 to get the stereo headset profile going when i installed the headset as both stereo and regular.
I finally got my HT820 working
I have a T-mobile US MDA.
I first upgraded to ROM 2.24 which supports A2DP, which is what the headset uses for sound other than the phone. (When you flash your ROM it intalls all new boot up software so it changes your hard-reset process, and you lose your support.) Then I paired. You should see the services the headset offers, handsfree and stereo. There's also a menu available when you hold-slelect the name of the BT device in the device list that's handy.
I did discover that it is a headset problem if the sound skips out irratically averaging about 20 seconds. There was a bad batch sent out to/from Hong Kong. Motorola is replacing mine, but I had to pay to ship it to them.
Hope this helps!
I don't want to hijack your thread but I don't know where else to turn. I have requested help elswhere on this forum for my problem but I can't seem to get any help.
I have a ht820 and a cingular 8125. I've been able to pair the headset with my phone but, when I try to play a mp3, the voice speed dial comes up, the mp3 plays for about 3 seconds, then the mp3 audio reverts back to the phone.
Do I have to flash to a different rom, do I have to tweak registry settings? I don't really have a clue what I should do. Please help.
Porter
Edit: I've solved my problem. See this thread for my fix.
http://forum.xda-developers.com/viewtopic.php?t=58192&highlight=
Thanks
Actually what it sounds like is the phone is only connecting to the headset for that time under the premise of a voice dial with the headset profile. I think you're lucky enough that you can get it to play for those 3 seconds. I have a Sony Ericcson w810i and I can't even get any audio from it to the headset at all without using the w810i's 3.5mm adapter to the patch cable on the headphones which just looks weird. But you might want to do a search for your model phone like this, "Cingular 8125 Motorola HT820" and see what kinda results you get.

Streaming audio to car stereo via bluetooth?

Hi, I'm a first time poster and I'm on the verge of pulling my hair out.
I have an SPV M600 and have just bought a Pioneer DEH P75BT car stereo because of its bluetooth capabilities.
It has two bluetooth modes: Telephone and BT Audio. After a lot of playing around I have managed to get both modes working together....ish!!!
I've installed the A2DP hack from this site enabling the streaming audio which actually sounds fantastic through the car speakers.
The problem is that to get the BT Audio to work I have to delete and repair the phone with the stereo every time I get in the car. This involves the following actions:
Open Comm Manager
Tap settings
Tap bluetooth settings
Tap devices
Tap and hold the Pioneer BT unit
Tap delete
Tap yes to confirm deletion
Tap new partnership
Wait for scanning to complete
Tap the Pioneer BT unit
Tap next
Enter passkey (four taps)
Tap next
Tap finish
As you can imagine, this process is a real pain in the backside every time I get in the car so my question is this.
Can the above actions be automated in just one command? If so how? (bearing in mind I do not really know how to write scripts)
If someone could even point me in the direction of learning to write a script for this I would be grateful. I have downloaded and installed MortScript but I don't really know what I'm doing with it.
Why when you tap and hold the device doesn't the "set as wireless stereo" command work the same as when the stereo and phone are newly paired? Surely it's the same command.
Any help would be gratefully received.
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
JRH said:
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
Click to expand...
Click to collapse
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Hello I had the same problem: erase, new, etc.
but i have discovered one thing: you must only change de name in the bt description of your hands free
neomagik said:
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Click to expand...
Click to collapse
I was just about to point this fella in your direction ...
You'd have to do an indefinite loop while checking a registry value to see if your stereo was found. There is a key, i'm sure, for a list of found devices but I don't know where that is. As for detecting your car stereo as the one to pair with; depends on what keys are saved, sounds like it may just be possible.
I'll have a look into this as I'd like to get this stereo also if it can connect & stream automatically
If returning it is still an option, I'd get the Sony Bluetooth Audio headunit. Works great for listening to audio from your phone. It pairs it automatically. I also use Jawbone headset for talking on the phone. It kicks off the stereo and goes to the headset when a call comes in.
The built in mic is in the headunit and in my loud car, its subpar in quality. Whicj is why I use the excellent Jawbone.
I personally own a Peekton 950 car stereo and it works great with my wm5 (a2dp enabled) and my new WM6. the only thing that it does not do is autodiscover and connect the A2DP while it does it for the headset profile.
one other thing I would enjoy is to have the idtag displayed while getting the A2dp but I guess this is not part of the spec.
As I wrote in this topic, I guess the A2DP profile has two way of linking.
1°) The "headset" way : a bluetooth A2DP headset initiates communication to the music player/WM device.
2°) The "passive" way : The speaker just waits for a known bluetooth audio player to connect/link to it.
What surprises me is the fact you need to unpair-repair your device everytime : have you tried what I explain in the previous topic : just go to bluetooth devices , long tap on your spearker's name and choose "use as bluetooth speaker" (may not be exact name of the option since I've a French phone ).
On my phone, this simple (but annoying enough) action connects my phone to my bluetooth speaker (not an in-car one).
Hope this helps
PS : If you find any way to script/automatize the connection or any app more convenient than opeining the bluetooth setting, I'd be very pleased to be informed
This probably wont help the OP's problem, but for the rest, this freeware is brilliant, and can be automated using command line switches to work via mapped keys.
http://www.teksoftco.com/index.php?section=freeware
Surur
Many thanks for this piece of software Susur. I tried it, but I didn't manage to use it to initiate connection to my bluetooth a2dp speaker.
It's a very usefull software when your device is connected to an A2DP speaker/headphone.
There is a DIY option bluetooth headset acting as audio receiver.
http://www.grynx.com/projects/bluetooth-stereo-in-the-car/5/

Cingular 8125 Windows Media Stereo Bluetooth

Here is my goal:
*****
Use my Cingular 8125 to listen to Windows Media Player through a stereo bluetooth headset.
*****
I have seen a lot of references to A2DP and many references to cab files, registry hacks etc. Is there one clear definitive way to accomplish this? All the instructions in one place? Would the sound from Windows Media Player be routed to the bluetooth device instead of coming out of the speakers like it does now? The bluetooth device works for phone fuctions but not for Windows Media Player.
Thank you
bluetooth
there are many ways of doing this the easy way is to find the buletooth audio toggle program. the other is to get a stereo headset and one of the new roms that support a2dp i like shogun's one best and flash your phone.
Woo Hoo i have fans, lol... all you really need is a bluetooth stereo headset and a2dp cab to install... then when you sync your stereo headset with the phone it will ask you if you want to use it as a stereo headset..
Thanks. How do I get and install the A2DP cab. Is is just one file involved or is a combination of a cab file, dll files and registry hacks that must be manually copied and applied? I am just looking for the most straight forward way of accomplishing this. I would also please like to get a clear answer on one of my original questions: With the A2DP cab installed and a stereo bluetooth headset, will the output from Windows Media Player automatically go to the headset instead of coming out of the built-in speakers?
here you go, just install this cab for a2dp... the other things you saw where improvement hacks, and those are only needed if you have choppy or skipping issues with your stereo headset, most commonly with the moto HT820
shogunmark, thank you very much! I can't wait to try it!
Absolutely Awesome Shogun!!!!
I just bought my HT820's today to take on a trip. I was pretty unhappy when I couldn't listen to my MP3's using my 8125. Then I checked out Howard's forums, which steered me here. The rest is history!!!!!
The sound quality with my unit is just about as good as with my wired stereo headset! I have yet to take a call, but heck, at least I've got my tunes!
Thanks again Shogun!!
Hey guys....I'm new to all this stuff. When you install the a2dp file, how do you get the windows media player to play through the BT stereo headphones? What steps do you have to go through?
I have the 8125 and have installed the A2DP cab. I deleted my partnership with my H700 bluetooth handfree, but I do not have an option to listen to stereo anything. I am guessing that the H700 does not work as a "stereo headset". Anyone else get this combo to work?!
Works for two seconds only !!
Hey Shotgun/other gurus !
I installed the cab, and viola !!! it worked !!!!
but only for 2 seconds, I have a nokia h200 headset, and a Cingular-8125.
I did the following ->
1) Installed the cab.
2.) Went to settings of the bluetooth, did a "Add device as head set"
3.) Synched up the bluetooth device.
4.) Pressed and held, the bluetooth button.
5.) This popped up, both the "Voice dialer" and the gave me background mp3.
6.) When the pop-up for voice dialing went off, the voice returned to the headset !
Can you please suggest something on this !
Now I know that it works ! seems I'm closer to reaping good songs, any suggestions/links you can give me would be GREAT !!!!
A2DP is for STEREO headsets, people!
Lots of confusion on this thread. AFAIK the H700 is NOT a stereo headset supporting the A2DP standard. Installing the A2DP cab isn't going to do a thing for you! You may as well uninstall it and save the memory.
If you want to pipe sound through your MONO bluetooth headset, use the BTAudio program. One place to find it is:
http://forum.xda-developers.com/showthread.php?t=260666
Also, for the person that talked about the Nokia H200. What the heck is that? I did a Yahoo search and found no such device. In any case, I am assuming it is a mono bluetooth headset, in which case the program referenced above should work.
HTH
how do i go about downloading this zip file to my 8125?
thanks for the help
Hold stylus on the file (right click), select save as,
select a location, click save.
moto HT820 choppy and skipping
I install the cab fail for a2dp, but my moto HT820 stereo bluetooth headset is choppy and skipping. Is there a fix for this problem
Oh Yea
Thanks shogunmark that worked great and my new Bluespoon Spiders work great in every respect.
Using Jabra BT500 with 8125
I have an 8125 and am using a Jabra BT500v headset. I have installed BTaudio and have a shortcut on the today screen, When I hit the toggle icon, everything comes thru headset, for 1 call only. After that it goes back to the phone and I have to hit the toggle again. Any way to keep this on? New to this, but learning alot in this forum.
stereo thru my 8125 cingular phone
thanx! i have downloaded and installed the a2dp cab
i then paired the phone with the ht820 headset.
i now listen to all of my mp3 music in stereo and my bluetooth screen gives me the choice to check handsfree and stereo headset!
and to think i was getting ready to buy a phone that had a2dp built in.
you saved me a ton of money!
Wicked!!
Shogun, absolutely fantastic. iWing headset worked as a BT handsfree on my Wizard, now with new improved A2DP cab I can listen to all the music I have on my SD card.
Thanks.
DBo.
samaad10 said:
thanx! i have downloaded and installed the a2dp cab
i then paired the phone with the ht820 headset.
i now listen to all of my mp3 music in stereo and my bluetooth screen gives me the choice to check handsfree and stereo headset!
and to think i was getting ready to buy a phone that had a2dp built in.
you saved me a ton of money!
Click to expand...
Click to collapse
you know... i am accepting donations
wngnut said:
I have an 8125 and am using a Jabra BT500v headset. I have installed BTaudio and have a shortcut on the today screen, When I hit the toggle icon, everything comes thru headset, for 1 call only. After that it goes back to the phone and I have to hit the toggle again. Any way to keep this on? New to this, but learning alot in this forum.
Click to expand...
Click to collapse
yes, turn on flight mode.. lol
that almost sounds like a fault of the headset, i havent ever experienced that with my horrible knock off HT820's from ebay, but would be curious to see if other people with the Jabra BT500v have a similiar issue

I had tried many roms but still have problem with BT headset. Please help???

First of all, I would like to says big thank to all rom cooker. You all did a very great roms. However, I still have a little problem that annoy me a lot...
I had connected the stero bluetooth headset with Hermes and choose both "Wireless Stero" and "Headset" profiles in bluetooth setting.
Then when there is incomming call, the Hermes will not ring. So I had a lot of miss calls.
However, if I disable the "Wireless Stero" profile in bluetooth setting, the Hermes will ring normally.
I used to use the Prophet before and there is no problem. The Prophet will ring normally although I choose both profiles.
The stero bluetooth headset is the same, iTech Clip Radio.
I had tried on many roms and found the same problem. So I guess that maybe I have to modify the registry setting to enable ringing on "Wireless Stero" profiles. Can somebody help me to solve the problem please???
I have the same issue and assumed that's how it worked since I just got this Jabra BT8040 that supports wireless stereo. It would only ring through my headset when wireless stero was enabled. If there is a way to get the phone to ring also that would be great. Right now I do the same thing as you, disable the wireless stereo until I need to use it.
My guess is this is by design since all sound is routed to stereo headset then so would the ringer. This isn't an issue for me since the Jabra BT8010 I can turn on/off stereo by simply pressing a button on the headset.
Sorry don't know of a solution.
Thinking about it I guess you could use something like mortscript and make a button that turns stereo pairing on/off to make it simpler I dunno.
I have similar issues with the PAYS rom, when listening to music via my BT earpice (Jabra) where you click the answer button on the earpice it then takes the music from the device and plays it through the jabra ONLY for about 5 seconds and then defaults back to the device?
Any suggestions would be appreciated?

Ringtone only in headset,driving me nuts!

in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..

Categories

Resources