Anyone know anything about the materials the desire screen is made of? I noticed htc introced an olephobic screen fro the Hero but did not use this for the Desire, anyone know why? It seems quite effective in reducing finger grease on the Hero so just interested what prevented its use on the Desire. Which begs the question whats the composition of the Desire screen and is it as durable/scratch resistant as say the iphone 3gs which does seem very durable. I'd rather not stick a screen protector on my desire screen as a: I can never get them on perfectly and b:the screen is so awesome for viewing images I dont want anything to reduce the viewing quality. That said if its less durable I'll put one on! Be glad of any input, knowledge or experience. Thanks.
Been using the phone for 5 weeks now. No marks on the screen. I keep it in a small micro-fibre pouch and isolate it from keys or coins in pocket.
I'm sure it can be scratched though. i.e. if you had fragments of salt/sand in your pocket etc. I don't use a screen protector for the reasons you outlined (awesome screen) but I do take care of it.
the display is quite prone to smudging, however I've always used screen protector which don't affect the display at all and actually make it a lot less prone to attract grease.
Funny thing is that my 15 € martin fields would attract lots of fingerprints, while this 50c one is really oleophobic !
Any advice on cleaning the screen?
Microfiber cloth. No chemicals or wax/polish as suggested by others. Anything like that could damage the rubber gasket around the glass. I think if you have just used your fingers on the screen, it just has finger grease on it, so just use a microfiber cloth and it sucks all that grease right off. Clean the cloth occasionally. Job done.
BTW, if you have clean dry hands you can avoid much of the fingerprints you would expect on the screen. Although in hot climates or certain situations its unavoidable. Microfiber for the win.
To me the screen seems just as oleophobic as on the Hero - As it's been pointed out many times, oleophobic doesn't mean that the screen won't smudge - The main difference is that it's a lot easier to wipe clean compared to other screens. The Desire is exactly the same as the Hero in this regard - I can normally wipe it clean just by wiping once or twice against my shirt - On other phones it'll require a microfiber cloth and actual sustained wiping.
Not sure about the materials, but I have noticed that the Desire's screen is much much more resistant to smudging then the screen on the Magic, easier to clean too.
-------------------------------------
Sent from my HTC Desire
Related
Not sure why I tried this, but I was polishing the Alfa in the sun & and thought mmm the paint work is very smooth and noticed it resisted my grubby finger prints.
So I thought I’ll wipe my phone screen with the rag which was a microfiber non scratch cloth and low and behold it was like the Teflon coated Iphone.
Start with a clean screen of course.
Get a clean microfiber cloth, ad a glob of Auto Glym Super Resin Polish cream to the cloth and work into the cloth so when you wipe and polish the screen its not to wet.
Let it dry to white film and polish off.
Let me know if any of you guys try this and your results.
CHECK IT OUT IT'S AMAZING!!!!
Apply 2 coats to make sure you get full effect, not too thin either.
Tempted but rather wait for some more feedback. I guess it doesn't scratch the screen or degrade the quality in anyway? How about anti glare?
-------------------------------------
Sent via the XDA Tapatalk App
neuromacer said:
Tempted but rather wait for some more feedback. I guess it doesn't scratch the screen or degrade the quality in anyway? How about anti glare?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
It improves the screen as no dirt or finger marks build up.
No issues with this application.
O
neuromacer said:
Tempted but rather wait for some more feedback. I guess it doesn't scratch the screen or degrade the quality in anyway? How about anti glare?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
It improves the screen as no dirt or finger marks build up.
No issues with this application. Just an amazingly clean slick screen....aka teflon coated iPhone 3gs, but better.
Maybe worth applying it to a screen protector to see if it produces the same results?
This sounds like an awesome idea
Sent from my HTC Desire using Tapatalk
this is either incredibly good as an idea or a total hoax. any evidence?
Screen protectors are not going to be a good test. Being an uneven surface, unlike your screen.
At the end of the day your phone has a non pouurious surface.
Car paint does have a pouurious surface and you can remove auto glym.
You are trying to coat your screen with a liquid polymer gloss to help repel dirt. that's all, you can wash it off with washing up liquid. But I reconcile soap is more dangerous than a liquid polymer on glass surfaces.
Rod
Will pick some up tomorrow but will be applying it to a cheap screen protector 1st. Will report back tomorrow pm.
ive got a bottle of this in the cupboard. tempted to give it a go but must admit im a little cautious. does it get in the ridge around the edge of the screen? i can imagine it'd be impossible to buff out of there!
No its fine, use a micro fibre cloth to buff off then you get into the small area and apply with your finger using small circular motion as you would buffing it on the car, keep doing it for about 3-- 5mins until it get nice and thick and stops beading on the surface, then let it dry, as it takes a while to go off on the glass surface, indoors.
The crazy thing is if a finger print does transfer to the screen you can use your other finger to wipe it away, as its got a very low friction surface now.
has anyone else confirmed this yet? I managed to get a near empty bottle, sooo tempted! my greasy finger prints are annoying me!
-------------------------------------
Sent via the XDA Tapatalk App
Am also waiting on more feed back
Sent from my HTC Desire using Tapatalk
I only see my finger prints when the screen is off! They disappear when it is on so it doesn't matter.
I will not risk damaging the original protection of the screen.
You are all aware that SRP is a very fine polish....polishes by their very nature use very small particles to scrub surfaces down to a smooth finish. In SRP's case it is very small particles but they still scrub. Been using it for years on my cars and its very good at leaving a very smooth surface - it does this by scrubbing away any debris and smoothing out scuffs and scratches.
Car paint is softer then galss but in the long run it may still damage your screen. If you really want to use car cleaning products on your screens then just wipe it normally then add a layer of sealant or wax. Will leave the coating that does exactly as you want but without any of the polishing.
On the odd occasion I actually use the desire as a phone. Is this stuff gonna interfere with my facial moisturiser?
AGRP is a mild abrasive. USE IT AT YOUR PERIL.....
Exactly, as others are saying, car polishes are abrasive. I can imagine it might work, but personally I wouldn't let it anywhere near my Desire's screen.
Sorry to revive such an old thread but I just used some Autoglym Glass Polish on my Xoom, Defy and Galaxy Nexus and it works a treat! Designed to clean car windows, there's no way it will bother fortified glass one bit. It keeps my screens fingerprint free for longer and makes it a breeze to wipe off smudges.
I have been using Zagg's invisibleShield for my Vibrant. However, recently I got my phone replaced and since I have heard so many good things about Realook, I wanted to give Rk a try instead of just ordering a replacement iS. Now that I have experienced both (albeit, I have only been using Rk for a short amount of time whereas I have plenty of experience with iS since this is my second device with it), I figure I should share my findings with my fellow XDA'ers. Note this is a comparison of only screen protectors - not whole body protectors.
Size/Coverage
Winner: Realook
Both iS and Rk cover 98%+ of the screen, including the touchkeys at the bottom. Both iS and Rk have an opening cut out for the speaker (Rk has a hole for the speaker, covering above and below the speaker, while iS has a cut-out for the speaker, not covering the small area above it). Only iS has an opening cut out for the light sensors - Rk does not have a cut out for the light sensors.
Rk covers more of the phone than iS. With iS, there is about .5-1 cm uncovered area - on all sides - between the screen protector and the edge of the phone. The uncovered area is large enough that a simple case will not cover it (i.e. you may find it catching dust, etc.) but small enough to not cause you protection issues or worries. Rk, on the other hand, covers more area. Depending on how well you apply it, you can potentially have very little uncovered area between the screen protector and the edge of the phone. Any area that is uncovered is small enough to be covered by a simple case, so little to no dust or dirt should get there. Personally, I was able to apply Rk in such a way that for the top, right, and left my case covered whatever Rk did not; I was not so lucky for the bottom -- there is a very minor uncovered gap that will probably catch dirt, etc.
Application/Installation
Winner: Depends on personal preference
Rk and iS differ highly in how they are applied to the phone. Rk is a "dry install' while iS is a "wet install".
With iS you are provided with some liquid solution that you use to apply the protector onto your phone. You spray the liquid on your fingertips - to help avoid fingerprints - and on the protector, before applying the protector onto the phone.
With Rk you have to peel off protective covers (the protector is covered by two "covers" on the front and back which need to be peeled off) before applying the protector on your phone.
Both iS and Rk are easily reapply-able if you make a mistake in positioning the protector. I hear Rk can even be reapplied at later dates, but I have not tested this out personally so I don't know. iS is also supposedly reapply-able, but only if you have any solution left.
There are both advantages and disadvantages to the iS/wet and Rk/dry application methods.
Because iS uses a liquid solution to assist in applying the protector, it is much easier to avoid catching dust and dirt particles under the protector and to avoid fingerprint marks. On the other hand, air bubbles are likely to occur and you need to be sure to push out the air bubbles with something like a credit card. Also, since you don't have to worry about fingerprints (thanks to the liquid solution) it is a bit easier to hold and apply iS if you are clumsy, like me. You need to be careful to conserve the liquid solution, though, because once you are out, your short on luck: You can either beg customer service to send you another one, or order extra solution from somewhere.
The advantage Rk's dry install offers is immediate up-time, and little-to-no air bubbles in the main area of the screen (there may be air bubble at the edges and/or around the speaker, though). With iS, you need to allow the phone to "dry" for something like 8-10 hours, whereas you can start using your phone with Rk ASAP. On the other hand, dust and dirt particles will drive you mad while trying to apply Rk, and you need to be careful to not touch the adhesive side with your fingers otherwise you may have fingerprint issues.
Two things that irk me about Rk are the confusing installation directions (you really need to be skilled with your fingers to do it as they want you to), and the fact that there was dirt/dust on the covers that protect the screen protector. The protector itself was 100% clean -- the two covers that protect the front and back/adhesive side, though, were a bit dirty so when you try to position the protector on your screen, as per the directions, prior to pulling off the two protective covers, the dirt/dust gets transferred to your screen and if you aren't careful you may not wipe it off before applying the protector.
Quality
Winner: invisibleShield
Both are excellent quality -- they have little to no effect on picture quality when compared to a naked Vibrant. I bet most people wouldn't even notice you have a screen protector if not specifically looking for one.
However, one very minor issue I noticed is at the lowest brightness setting, Rk caused the screen to be minor-ly less bright than iS. This is very minor and no one will even notice it unless specifically looking for it. At higher brightness settings, this issue is not even ascertainable.
Both Rk and iS attract fingerprints easily, and Rk is a bit easier to wipe off than iS.
One major issue I found, though, are reflections. Rk claims to be "anti-reflective" and "anti-glare" (it also claims to be "anti-fingerprint", which it isn't as I just mentioned), but in reality that couldn't be any further from the truth. I kid you not when I say you may confuse your phone for a mirror if you have Rk -- the reflection is that bad. While inside it isn't too bad as long as you don't have a light source directly behind you. When outside, however, the reflection/glare (whatever you want to call it) is terrible. Even on full brightness the reflection/glare is very annoying while outside -- forget using your phone on low brightness, which is something I could sometimes get away when I used iS.
iS, on the other hand, does well in protecting against glares and reflections. Indoors, even with a light source directly behind me, the phone is still very usable. And as long as I keep the protector clean, iS causes no problems outdoors.
Texture
Winner: Realook
Here is one major area that Rk and iS differ. Rk has more of a "glass" texture to it, while iS is more "plasticky". In other words, with Rk you will have more smooth, glass like feeling while with iS you may find a bit more friction. That is not to say Rk is always smooth -- if you drag your finger on Rk without picking it up for too long you will start to feel lots of friction also. However, in general, Rk has a must better feel to it than iS. In fact, iS has somewhat of a "break-in" period where you may notice your fingers sticking to iS making using a touchscreen near impossible for the first few days.
Price
Winner: Depends on how many times you replace your phone
Realook costs you $10.99 with free shipping (both Amazon and eBay listings provide free shipping) for a two-pack.
invisibleShield screen protector only (not fully body cover) costs you $14.99 + shipping for one protector. (You may be able to get a 50% off coupon for iS if you submit your e-mail for their awards/giveaways program - I did.) However, iS has a "life-time guarantee" where you can get a "free" iS replacement if your screen protector ever gets scratched. (You may also get a free replacement if you get your device replaced, like a warranty replacement -- they allow you to do that.) I put free in quotes because, it isn't really free -- you have to pay $3.99 for shipping and send back the old screen protector (which will only cost you an envelope and a stamp).
Final Words
Both Realook and invisibleShield are top-class. They are both terrific products, both with advantages and disadvantages. Personally, I prefer Realook's "glassy" feeling and better coverage than iS but the reflection/glare on Realook is a deal breaker since I use my phone outside often. So, my next course of action will be to see if Realook has any sort of money back guarantee since this product fails to do as it advertises when it comes to reflection and glare. In other words, I am going with invisibleShield. For everyone else, however, I can't provide a general recommendation since everyone has their own tastes and preferences. I do hope, however, my comparison here helps you make your decision.
I have IS, it works as it should thus far. Does the one you use, tetain its shape after its ben scratched or dented by something like IS. I like the way IS feels, everyone else hates it though lol. Guess it doesnt matter since it is my phone lol.
Invisible Shield is a ***** to install. Its very sticky and kept sticking on my fingers and flapping up. It took me a while to get it right. Other than the install issue, I am very happy with IS. The shield is already scratched up but it is very strong material and I know that my vibrant glass underneath is unscratched. I am thinking about sending the scratched IS back for a replacement but since the install is a ***** I will wait until it is really scratched up.
I've used both and IMO RealLook is superior by far. It doesn't look like I have anything on the screen. I haven't personally noticed any glare issues. I hated InvisibleShield. It looked like I had a covering on my screen, it smudged easily, and was hard to wipe the smudges off. With RealLook, I just use my shirt and it looks sparkling new. I had a go of it getting all of the bubble around the edge to come out, but once they were out, it was flawless.
I have also had both screen protectors on my Vibrant and the Realook beats the InvisibleShield hands down. If you are looking for a screen protector that is invisible in every way... The Reallook is the one for you.
Realook all the way. I had IS on my HD2 and hated it, it's thick, sticky even after install around the edges and kept peeling up.
Realook is easy to clean, looks like there's nothing there, as very low glare, and your fingers glide over the screen.
Sent from my SGH-T959 using XDA App
I just got mt real look yesterday, I love it. It looks like nothing is there, easy to put on too. I was surprised how fast I got it. I ordered it thursday and got it monday. Awesome
Sent from my SGH-T959 using XDA App
*Bump.. (hopefully it's not a problem resurrecting this thread )
Firstly, I want to thank DarkAgent for the very comprehensive review. Props to you! The review is intelligent, thorough, and very sensible.
And on that note, I have been a 'long-time' user of the BestSkinsEver (or BSE) products ever since they became more main-stream; I believe one of my first orders dates back to 2006. I have personally put more BSE/IS skins on devices than I can remember, literally dozens. And I must say the main reason I switched/used BSE's products in the first place was for that of their low cost, especially in consideration to InvisibleShield. With that said, I will have to admit that perhaps the most annoying thing about the skin in general I have found is its ability to attract dust/dirt/junk on, and along, the edges of the skin. This is often not only upsets the look of the device, but it in turn starts to gum up the adhesive of the skin and ultimately separates the skin from the device.
A rather long way to get around to saying that while I am quite happy with the product, and that I can now quite consistently get good results, I am open to other options.
The Realook has me tempted, if for nothing else it will help me in my own personal knowledge and for future recommendations to others.
Thanks again for the review/comparison, it was thoroughly appreciated!
I'd say Realook is look. I do get glare sometimes, but more of the time my screen is sharp as can be.
I love the phantomskinz screen protector. You don't even know there is one on it and it self heals itself.
Here's my problem..I love IS bc it really feels like it adds a layer of protection to the screen, it applies great and I've never had a single issue with bubbles, peeling, scratches, or the application process. I've used IS on at least 5 devices. What i dont like is the friction you experience with the protector and the screen quality has always been negatively affected in terms of brightness and clarity.
Now I've also used many hard protectors and have issues with them too, mainly its that they always get scratched up, begin to peel and quickly look terrible. So does RF have these issues? If I'm spending $10 on screen protectors I'd rather buy 10 $0.99 protectors and just swap them when they're scratched up. So is RF actually scratch resistant or only a screen protector? I'd rather stay with IS and not have to worry about ever replacing it due to scratches or peeling if RF is just like every other "dry" protector out there.
Thanks for the review, perfect timing for this too since I plan to order some accessories this weekend
Sent from my SGH-T959 using XDA App
buru898 said:
I love the phantomskinz screen protector. You don't even know there is one on it and it self heals itself.
Click to expand...
Click to collapse
Bodyguardz does the same thing, scratches get buffed out with normal use, and fade away.
Ginger Clones of the World Unite!!! via the XDA App
I've tried both, first iS then Realook.
I teared off iS the same day I put it on. That sticky feeling simply kills! It reminds
you constantly that there's something on your screen. Yes it is visually invisible, maybe. But mentally, it's NOT. And that sticky touch feels nasty as well.
Realook is a total different story, after putting it on (yes, I managed to put it on without a single dust getting between), I almost don't feel any screen protector there. It's smooth and responsive. All the way hands down.
I've used both and Realook is miles better. The IS yellows over time and distorts the screen too much. The friction on the screen is also annoying and is a constant reminder that you have it on. Finally, over time the edges will attract dust and dirt and start to gum up which eventually causes it to peel off. The only upside is that the stickiness (friction) is nice when you're holding the phone if you have it on the entire body.
I've had my realook on for almost a year now and don't have any problems. I've used it heavily and it doesn't show a scratch. The best part is that it's completely invisible both by looks AND feel. There is absolutely no comparison, the Realook is the superior product.
My advice for anyone putting it on is to dust your area with a damp rag and clean the phone off well. Once it's dry and polished pat it down with scotch tape to get the dust off before you apply the protector (also works on the underside of the Realook if you need to take it off).
The A100 seems to pick up smudges more than anything else I own.
My phone, which is smaller but otherwise looks nearly identical and shares a Gorilla Glass screen, doesn't pick up fingerprints nearly as easily nor obviously.
I've tried cleaning with an eyeglass cleaner (which works great on the phone), a drop of liquid hand soap and others and nothing seems to be a particularly good solution.
I've generally use a soft microfiber cloth, although I've experimented carefully with cotton terry and soft paper.
Has anyone found anything that cleans well and perhaps resists smudges?
Ever tried a 50/50 mix of white vinegar and distilled water? That and a paper towel picks up oils very well, and if you don't douse the paper towel with the solution leaves it nice and shiny. Nothing I can think of which resists smudges, at least not until the Max Planck institute manages to make that soot-derived coating work.
I use a foaming automotive glass cleaner and a paper towel.
The smudges were bothering me terribly, too, until I added a GreatShield matte screen protector a couple of months ago. Since then, reflections are greatly diminished, and smudges a thing of the past.
jschall said:
The smudges were bothering me terribly, too, until I added a GreatShield matte screen protector a couple of months ago. Since then, reflections are greatly diminished, and smudges a thing of the past.
Click to expand...
Click to collapse
Got the same thing, works great. Definitely reduced glare, and much less fingerprints showing after use. I normally just use a slightly damp microfiber cloth to wipe when I need to.
Thanks for the replies.
Even though the screen is Gorilla Glass, I didn't think of using an actually glass cleaner. Too much Plexiglas in my life, I guess.
I found one automotive cleaner/shiner in my garage that works okay, but ordered the matte GreatShield today. I'm just hoping I can get it on cleanly without dust underneath.
I've been disappointed with skins on my phone. (Clarivue and Zagg were two brands that were both a waste of money with inferior products and poor customer service.)
Screen cleaner
I use Monster cleaner the I got from Best Buy.
Cleans really nice, cuts down the glare and finger smudges are kept at bay for days.
i use Endust LCD and Plasma wipes
i wipe off the excess moisture with whatever those little screen cleaning rags are called
it gets my screen squeaky clean
fred99u said:
i use Endust LCD and Plasma wipes
i wipe off the excess moisture with whatever those little screen cleaning rags are called
it gets my screen squeaky clean
Click to expand...
Click to collapse
Yep LCD pannel cleaner spray and a micro-fiber towel works well to clean it(untill you touch it again). Though I would say in the long run a shield that keeps it from getting smudged in the first place seems like the best solution.
NoSudo said:
Yep LCD pannel cleaner spray and a micro-fiber towel works well to clean it(untill you touch it again). Though I would say in the long run a shield that keeps it from getting smudged in the first place seems like the best solution.
Click to expand...
Click to collapse
i agree a screen protector is a must
Will be buying a screen protector this weekend, feel like it's time, haven't used a screen protector since like 09 on my dark iPhone days.
I clean mine with household polish, the stuff that says is fine for electronics and glass, it leaves a pretty good friction free finish - I've tried alsorts on my tablet to keep it clean, Brasso gadget clean, LCD panel stuff, generic gadget cleaning stuff. Turns out bog standard polish is the best for me
RangerJay said:
The A100 seems to pick up smudges more than anything else I own.
I've generally use a soft microfiber cloth, although I've experimented carefully with cotton terry and soft paper.
Has anyone found anything that cleans well and perhaps resists smudges?
Click to expand...
Click to collapse
I have found this microfiber cloth to work very well:
http://www.simplygoodstuff.com/microfiber_lens-cloths.htm
I wet the corner of the cloth with water and wipe once with the wet end. Then I do a few quick wipes with the dry end the screen is like new.
My new Fold 2 is arriving today. I intend to remove the main screen factory protector. I've read about people's experience with replacing the screen protector and it seems that unless using matte protector (which I do not want to do for now), fingerprints remain an issue.
My question is has anyone tried applying an oleopbobic coating to a clear TPU protector? Is this possible? I'm looking at possibly the Orzero protector and something like the following:
Amazon.com: OLEOPEL Oleophobic Coating Wipe On Kit 4ml Anti Fingerprint Liquid for All Smartphones Tablets Smart Watches Glasses Camera Lenses and Touch Screens
Buy OLEOPEL Oleophobic Coating Wipe On Kit 4ml Anti Fingerprint Liquid for All Smartphones Tablets Smart Watches Glasses Camera Lenses and Touch Screens: Screen Protectors - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Thanks ahead of time.
Sounds like a great idea. Definitely interested in knowing the experience of others who may have tried this. Personally, I do not recommend you remove your inner display protector until you have another one immediately to apply. The standard one installed by Samsung feels gross and all, however it is still projecting the screen from scratches...
I went ahead and removed the main screen protector and applied the above oleophobic coating. Easy application and a relatively short cure time. So far, I'm very happy with the results, although it's difficult to tell how much impact it had given the screen presumably may have some coating already. Maybe not since it's not glass?
Early results seem very good as I am not noticing very many fingerprints at all and they are very easily wiped away with a soft microfiber cloth. Time will tell about durability and I will report back with my results.
The above kit also had plenty left to apply to the outer screen with a factory screen protector. The application seemed identical although again I'm not sure if it actually bonded or not. Likewise, I'm not noticing many fingerprints and they are easily removed. Will report back on this as well.
So far so good.
It's nearly worthless as it's only a couple of microns thick at the best. Thickness matters.
No impact protection whatsoever and very little scratch or marring protection regardless of the claims.
Liquid Glass works on cars after about 3-5 coat/ cure cycles as it bonds to its self and builds in thickness. At around 5 coats it might be 1-2 mils thick. Resembles a clear coat at that point and adds a degree of protection more so than wax.
One coat does nothing.
Even it's no substitute for any type of clear tape of even the thinness mil thickness.
Thanks for the reply. I'm not using it as a protective coat but for the anti-fimgerprint qualities.
ladera said:
Thanks for the reply. I'm not using it as a protective coat but for the anti-fimgerprint qualities.
Click to expand...
Click to collapse
For that it will work.
It will be interesting to see have long it lasts. The dry skin of the fingers and palms can actually polish glass, it is abrasive.
ladera said:
Thanks for the reply. I'm not using it as a protective coat but for the anti-fimgerprint qualities.
Click to expand...
Click to collapse
How long have you been using your phone this way? Just curious if you've seen any scratches on your screen? I switched out the screen protector and while it is definitely smoother the the factory one, I still long for a smooth glass like feel and am very tempted to go protector free.
Only about 5 days so far but I love it. Of course, I can't speak to the !ong-term yet. I'm pretty careful (famous last words, right?). I avoid wiping it with anything but a microfiber cloth or a double plush microfiber towel (the kind I use on my car). I love the double plush towel because I can clean the screen in about 2 seconds. BUT, it's too big to pocket obviously. I'm actually on the lookout for some kind of small plush towel that can fit in my pocket lol.
Thus far, no scratches at all.
ladera said:
Only about 5 days so far but I love it. Of course, I can't speak to the !ong-term yet. I'm pretty careful (famous last words, right?). I avoid wiping it with anything but a microfiber cloth or a double plush microfiber towel (the kind I use on my car). I love the double plush towel because I can clean the screen in about 2 seconds. BUT, it's too big to pocket obviously. I'm actually on the lookout for some kind of small plush towel that can fit in my pocket lol.
Thus far, no scratches at all.
Click to expand...
Click to collapse
It's easy enough to reapply as needed
Microfiber clothes are all I use. Been using them to dry wipe optics for well over a decade.
Any other material is likely to cause scratches sooner or latter...
Hey Guys, how is your Honor Ultimate managing scratches? i don't use screenprotectors because they don't survive long. My front screen has a lot of tiny scractches already after few months! Only putting it in my front jean pocket alone without keys, nothing! Working at an Office so no important dirt!
Is it gorilla glas? i had lot of phones before doing exactly the same things, but the honor seems getting impacted worse!
And the cameralens at the back has 2 deep scratches! how is this possible?
You experiencing the same thing?
Yeah that sucks...
Sand is almost always the culprit. One grain is all it takes. Sand is found just about everywhere.
Grit from granite bedrock will do it too. Pockets tend to collect debris and some of it may be hard enough to scratch glass. Loose pockets work better.
Any fine grit on your finger tip can do it. If water is present it acts as a cutting lubricant for any abrasives present. Brass keys are too soft to scratch glass.
Without a screen protector scratches are par for the course and it doesn't matter which type of glass as all will scratch to a greater or lesser extent.
Finding the right protector and applying are a true pain. I like the water based hydrogel ones.
Selection and availability depends on the phone make/model.
I've had mine for roughly a month here so far so good. Are you using a case on yours? I've been using the one that came with the phone and ordered a new case that I plan to use with it. I always wipe my screen with microfiber cloth and try to put it in a non abrasive pocket etc.