hi guys is my first post at the forum although i been following it quite a lot .Recently i broke my lcd screen of my exec (bought it recently and very impresed by it,).The screens as i saw on the internet are quite expensive and then i came at this site that says that fujitsu siemens pocket loox practically has the same screen as the exec.I want to confirm that with you(that i put the screen of the loox at the exec ) plus if the ram of the pocket loox can be placed at the exec (to buy the pocket loox 2nd hand is cheaper than buying just a screen for the exec ) .And if can somebody reccomend other brands that have identical sceen .Thanks
Welcome to forums
Not sure if it will fit to Universal, but if it´s so expensive perhaps it´s better if you buy another Universal, have a look on this section and in marketplace, I saw to members selling their Unis
Good luck,
thanks for your reply that is what i had found at the description of the lcd screen of the site :<ITEM description -Fit for:ACX526AKM-7 LCD Screen( with Touch Screen Digitizer ) for Orange SPV M5000/HTC Universal/ Vodafone v1640 / Vodafone VPA IV/ E-Plus PDA IV/ Grundig GR980/ O2 XDA Exec/ Dopod D900/ Fujitsu-Siemens LOOX 718/ i-mate Jasjar/ Qtek 9000 T-Mobile MDA IV/MDA pro / Fujitsu-Siemens LOOX 720 -OEM and Brand new>
checked the technical data of the screen of the pocket loox 718-720 and it seems identical as the executive (dont know about the memory though)
Related
trying to find parts for my Qtek 1010 and I find it very difficult does this PDA have another technical name? A car charger adaptor for an Ipaq was connected to it although the same connector it is not wired the same so i was tols i killed the mainboard. Is this PDA unrepairable were can i buy a used one?
hope someone can assist my predicament.....Bigdin
the device is also known as
htc Wallaby / O2 Xda / Qtek 1010 / Qtek 1020 / Siemens SX56 / T-Mobile MDA/ Dopod 686
http://wiki.xda-developers.com/index.php?pagename=Wallaby
Bigdin,
The XDA I (Qtek 1010) and HP iPAQ 22 pin connectors are definitely wired differently.. But a brief connection of the iPAQ one shouldn't do too much damage.. That said.. The old XDAI mainboards are very cheap now (or grab a unit on eBay with a failed scren and DIY it)..
Last time we grabbed a new mainboard it was around $200 for a fully tested / guaranteed one.
Realistically though, it may be time to upgrade to a good, new / cheap little PDA like the HTC Touch..
http://store.pressdigital.com.au/touch-gsmgprs-smartphone-p-4630.html
Your Qtek's battery is probably in need of a replacement.. then there's the PPC 2002 ROM (or the rather flakey cooked ones around)..
Good luck with the dilemma..
Andy
www.pressdigital.com.au
Press Digital Support Team
Hi guys,
After taking the protective film off my screen 'cos it was all scratched and dirty, i've now got the actual screen itself all scratched...
can somone confirm - the actual scratched area is the layer UNDER where the protective film would be (if I still had it on) - it's the actual casing / screen itself.... is this the "touch screen" layer, or the LCD itself?
Either way, does anyone know where I can get a replacement screen, roughly how much they cost, and how difficult it is to fit?
Thanks...
cy80rg said:
Hi guys,
After taking the protective film off my screen 'cos it was all scratched and dirty, i've now got the actual screen itself all scratched...
can somone confirm - the actual scratched area is the layer UNDER where the protective film would be (if I still had it on) - it's the actual casing / screen itself.... is this the "touch screen" layer, or the LCD itself?
Either way, does anyone know where I can get a replacement screen, roughly how much they cost, and how difficult it is to fit?
Thanks...
Click to expand...
Click to collapse
Hi,
I think you should take it to the repairing shop ! You can buy it there they will install for you ! we have LCD for this but i am not so sure what it is the model and i think for one pcs the price will much higher than in your country ! Thank you !But you can check it !
Toppoly
TD035STEB1:Acer3230/3250, N30/N35/N50, ASUS A620/A620BT, Asus MyPal A716, Holux GPS mile 60
TD035STEB2: Dopod699/696(2nd gen)，Loox420, Himalaya, HP ipaq37xx, HP ipaq Rx3x15,HTC Alpine, Orange SPV 1500, PDA2, XDA Iii, Qtex2020i
TD035STEB3: HP1717/2110/2410/2750, HP ipaq hx21xx, ipaq 24xx/27xx
TD035STEB4: Acer N30/N35/N50, Asus A635
TD035STED1: Dopod D700(1st gen, silver line)，Orange SPV 2000, Qtex9090, XDA IIs, HTC Blueangel
TD035STED2:
TD035STED3: Loox520
TD035STED4: Asus632, A636
TD035STED5: HP ipaq 194x/1950
TD028STEB1: Dopod818/828/838, 818pro, I-mate PDA2k, 02xda mini, Orange M500, Orange SPV M3000, Orange SPV M600, Qtex S100/S110/S200, T-Mobile MDA Vario,UTStarcommPPC-6700
TD028STEB2: PDA
TD022SHEB2: Dopod 565/575/585/586, Audiovox SMT5600, I-mate SP3i, SP3, 02xphone, Orange SPV C500, Qtex8010, HTC Amadeus
TD022THEC1: Dopod 566/586/c600/595/596, I-mate SP5m, I-mate SPJAS, Orange SPV C700,
Qtex8300/8310/8600, T-Mobile SDA
Sharp
LQ035Q7DB02: Acer N10
LQ035Q7DH01: Dell Axim X3
LQ035Q7DH01: Garmin c310 street pilot
LQ035Q7DH04: Dell Axim X30, Dell X30
LQ035Q7DH05: Dell Axim X50
LQ035Q2DD54: Sharp Rz-N150S
LS037V7DD03: Casio DT-10M50, Cingular2125
LS037V7DD02: Hitachi e800
LS037V7DD05: Dell X50U, Dell Axim X50V
LS030Q7DH01: Lenovo Et280
LS040V7DD02: Toshiba e800/e8xx
LQ030B7DH53: Zire 71/72
Sony
ACX502BMU: HP1935/1940/4150/4155/4350/4355/6315/6365, HP ipaq193x/194x
ACX502AKN: Dopod 696(1st gen)/696i/699, HP2200, ipaq h2210
ACX502BMV-7: Dopod D700(2nd gen)，02XDA Iis, Qtex9090, Orange SPV M200
ACX502BMW: HP1940/4150/6300/6365, Palm Z125
ACX502BMV: HTC Blueangel
ACX706AKM: Dopod 686/696
ACX706AKM-7: Qtex1010
ACX526AKM: Dopod D900, I-mate jasjar, Loox720, MDA Pro, Orange SPV M5000,Qtex9000,XDA Exec, XDA Executive
ACX525AKM: Sony Ericsson P9xx, P900
ACX501AKM: HP H3970
ACX523AKM: HP ipaq hx47xx
ACX533AKM: Treo650
ACX342BKM: HTEC
ACX342BKM8: Orange SPV C600, Cingular 2125
ACX346AMK-8: Blackberry 8700c
ACX346AKZ-8: Blackberry 8700c
ACX502ALM-7: PSC FALCON 4220
ACX507ALQ-3: Sony Clie PEG-TJ27
ACX709AKM-2: Sony Clie-n750c
Samsung
LTP280QV-E01: Dopod818/828/838, HTC Wizard (Cingular8125), 02XDA 11 Mini
LTP350Q2-PE1:
LTV350QV-F4: Longhorn M16 (mp4)
Sanyo
TM038QV-67A03: HP ipaq h3
If you are interested pls contact .i will send you all the needed information thank you so much !
MSN:[email protected]
EMAIL:[email protected]
YAHOO:[email protected]
skype:glendatang
I would like to know whether the parts of my i-mate pda2k are the same with O2 XDAIII parts.. I want to replace the casing of my imate pda2k as well as the keyboard.. I am just planning to buy defective O2 XDA III to replace some parts on my imatepda2k.
Do all the screws, fittings, external and internal parts of imate pda2k same with O2 XDA III?
and the O2 XDAIII the same with O2 XDAIIs? they do look the same..
man31 said:
I would like to know whether the parts of my i-mate pda2k are the same with O2 XDAIII parts.. I want to replace the casing of my imate pda2k as well as the keyboard.. I am just planning to buy defective O2 XDA III to replace some parts on my imatepda2k.
Do all the screws, fittings, external and internal parts of imate pda2k same with O2 XDA III?
and the O2 XDAIII the same with O2 XDAIIs? they do look the same..
Click to expand...
Click to collapse
You should look in the wiki, you will see all the possible name variations for the BA. If I am not mistaken, the only thing that may change between models is having a camera (or not like the SX66). The only BA-type device that will have a difference is the Harrier (CDMA version of the BA) which has a few more important differences.
i believe there are actually more differences in the hardware specs, like two different displays or something and i do remember there was a table on the wiki and i know, whenever i look for it, i spend ages searching, i wanted to provide the link here, but actually, i cannot find it right now... again.
Chef_Tony said:
i believe there are actually more differences in the hardware specs, like two different displays or something and i do remember there was a table on the wiki and i know, whenever i look for it, i spend ages searching, i wanted to provide the link here, but actually, i cannot find it right now... again.
Click to expand...
Click to collapse
True, but if he is only looking at the casing, he should not be concerned with anything "under the hood". As long as the case is the same, he will satisfy his needs.
actually i am planning for to get the casing of a defective O2 xdaIIs, which similarly looks the same with the imate pda2k.. will i succeed with this one?
Hi all, need help, can some 1 direct me where i can buy the stylus for my Fujitsu Siemens pocket loox T-830. I lost mine.
Many many thx
hi which type of stylus do i need for htc leo as i tried my friends and the one with the nintendo DS and it did not work
Hello JASJAR's fan!
I'm selling my JASJAR Yes I do!
I'm selling a qtek 9000, french model & a o2 xda exec as spare!
one is fully working and the second has a broken screen and I don't remember if the motherboard is fully working.
2 keyboards layout, one red in AZERTY and one blue in QWERTY
3 batteries and 1 aluminium cage.
Currently running WM 6.1.
I never upgraded the rom to 128Mb, both are 64mb original MB.
you can find the ebay auction on http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=200794376728#ht_500wt_1413
Feel free to contact me if you have any questions, selling as it.
Come and have a look
drath said:
Hello JASJAR's fan!
I'm selling my JASJAR Yes I do!
I'm selling a qtek 9000, french model & a o2 xda exec as spare!
one is fully working and the second has a broken screen and I don't remember if the motherboard is fully working.
2 keyboards layout, one red in AZERTY and one blue in QWERTY
3 batteries and 1 aluminium cage.
Currently running WM 6.1.
I never upgraded the rom to 128Mb, both are 64mb original MB.
you can find the ebay auction on http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=200794376728#ht_500wt_1413
Feel free to contact me if you have any questions, selling as it.
Click to expand...
Click to collapse
I wish i could've won this in time...i need some spares to potentially break....i just bought one today for $35USD. :victory:
still OK
drath said:
Hello JASJAR's fan!
I'm selling my JASJAR Yes I do!
I'm selling a qtek 9000, french model & a o2 xda exec as spare!
one is fully working and the second has a broken screen and I don't remember if the motherboard is fully working.
2 keyboards layout, one red in AZERTY and one blue in QWERTY
3 batteries and 1 aluminium cage.
Currently running WM 6.1.
I never upgraded the rom to 128Mb, both are 64mb original MB.
you can find the ebay auction on
Feel free to contact me if you have any questions, selling as it.
Click to expand...
Click to collapse
I'm really interested in your offer , please pm me the prices ASAP , WAITING
esely2007 said:
I'm really interested in your offer , please pm me the prices ASAP , WAITING
Click to expand...
Click to collapse
He sold this a while ago....