Hi Experts,
I have flashed the nrg rom and couple of official roms on my Tilt2 but i noticed that on my Tilt 2, Conference facilty is not supporting by some of the other reason, when i do Add call and then hit the conference button i can see people are in conference but only 1 person cannot hear me and even i cannot hear. is there a problem in the rom's or on my Phone, I also tried from another Tilt2 with flashed rom and found same problem. any suggestions from tilt2 users.
Regds,
Rankit
Mine does it also. I think we may not be doing it correctly.
well i removed the Tilt2 AT&T rom and loaded the official Singapore and UK Rom, then i tried NRG's and coupe other Roms but no sucess with Conf. call. I am planning to AT&T today and see whether they gotta do anything with it. Lets see. Appreciate if someone can help us .
Regds,
Rankit
What always works for me is if you encounter this problem, make one of the calls private.... wait for a couple of seconds and then reconference the calls.
This has worked for me 100% of the time....
Hope this helps.
FYI... this is for a Tilt 2 with stock ROM
Hi IBOJO
I tried you method but no sucess. can anybody who can help me its very frustrating as i am most on Conference calls due to my work. I can donate for the same.
Regds,
Rankit
Unbranded unlocked Rhodium
Conference call works as it should
Max conference I tested 6
Will test again with the new Sense 2.5 ROM I´ve just installed
well i have tilt2 phone and loaded sea version tried uk version. i tried changing radio but it seems no sucess. plz plz help me.
brent_si said:
Mine does it also. I think we may not be doing it correctly.
Click to expand...
Click to collapse
Hi Brent,
I have solved the problem, try to use TAsk29 first format the phone and then reload the ROM, it will work. I tried this process and i am not thru with 3 way call conferencing, works like a charm.
Regds,
Rankit
Related
Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?
i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:
Is your BT on? If not turn it on and leave it on.
good luck
Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?
Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?
i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.
matrix70 from version did you upgrade from, do you remember?
same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck
now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....
I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.
I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine
Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.
im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.
im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.
Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik
Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.
there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.
how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...
howdy folks
thanks for the great site.
ive had my BA for over a year...despite the occassional hangup it works fairly well. however all of a sudden when i try to make an outgoing call other than to my voicemail i get 3 beeps and the call is then ended. the weird thing is that this doesnt happen all of the time and with no apparent pattern.
i cant understand why this is happening as i havenet changed any of the software / network.
please help me !! i'm very tempted to see how many pieces i can break it into with one throw.
ramir
hey
if anyone needs more info to help me resolve my problem pls let me know
ramir
ramir said:
hey
if anyone needs more info to help me resolve my problem pls let me know
ramir
Click to expand...
Click to collapse
That is the behaviour of a network barred handset.
Richard
hey thanks for the reply
however there is no reason for my phone to be network barred ! i bought the phone while on the o2 network, had it unlocked and have been on vodafone for over a year with it working fine. i understand if it was barred it would block all my calls (maybe except vmail). thing is the 3 beeps i get are intermittant and dont happen with every call.
do you think it could be something to do with changes to vodafone and the way the xda works with vodafone. i'm not a techie person, but even this reason sounds unlikely to me.
any further ideas would be appreciated
many thanks
ramir
oh yeah...forgot to mention...i've had the phone since new and am the 1st and only owner of it
i get this sometimes also... and i think mine has to do with wm5, but im not for sure....
ok but i'm running WM2003se
is there anything that you do to your mobile to get it to dial out?
does anyone think that a rom upgrade or a radio upgrade may solve my problem?
hi,
i cooked a rom for myself with the kitchen program and now find that i cant dial numbers that start with +1 or any internatinal code
eg: +1 232892369283 but if i try to dial the same no. with no + sign ie just
232892369283 , i am able to call.....
i am with rogers in canada... what could be the issue.. the radio in my handset is 1.48 version...
please help.... as i have to edit the every number before i call
i changed the radio to 1.43 and still not working.. guess its something to do with the rom that i made... even tried installing the schaps rom...no way out???????
For the short term solution, have you tried to dial "00" instead of the "+"? They virtually do the same thing according to my understanding.
I REALLY dont need to use the 00 as i most of these numbers in my phone boook are local numbers, except that they were saved in the "+" format....
i tried to install all the available ROM s but none of them seem to solve this issue.. i am begining to think , either it could be a Rogers issue or i have screwed up something really bad
This isn't a Roger's issue as most of my numbers are dialed in international +1 format. So it must be the other one...
John
Same problem
Hi,
I have the same problem but only with VOIP calls. For GSM calls it works fine but with WM6 Inbuilt Voip calls it gives an error.
i have the same issue with mines...rogers...i notice it started to happen when i switch and put in my pay as you go chip...it use to work ok with my regular account...only started with pay as you go...is that what you are using
yes mine too is a pay as you go.. it was not like that always.. till saturday it was fine.. but i used to get this problem once in a while before but i thought that it was due to the rom that i was using... i never had such issues with my SE P990i phone that i had before....
Should i be calling rogers and ask ??? any not possible till tomorow evening
After installing Hard SPL 2.0, ATT radio 1.5.4, and Pays 6.1 i have the following problems, have searched for a few days now and still havent found anything.
I installed a CAB to set up my phone for ATT service, now i can recieve email, get online and Download MMS. SMS is fine. I can even use internet sharing perfectly. (although OUTGOING email also doesnt work when teathered.) Everything else is good besides:
No Camera, No Flashlight, No Superbright. Cannot SEND email via smtp with auth. Tested the smtp from my pc (not teathered) and it works fine.
If anyone even has this problem, make me feel better that im not the only one. I have tried flashing to different ROMs and camera has never worked since 6.1 flash. I also installed radio version 1.4.8 and still coulnt send email. - could this be my internet settings?
Thanks to all who can help!
enjoithis said:
After installing Hard SPL 2.0, ATT radio 1.5.4, and Pays 6.1 i have the following problems, have searched for a few days now and still havent found anything.
I installed a CAB to set up my phone for ATT service, now i can recieve email, get online and Download MMS. SMS is fine. I can even use internet sharing perfectly. (although OUTGOING email also doesnt work when teathered.) Everything else is good besides:
No Camera, No Flashlight, No Superbright. Cannot SEND email via smtp with auth. Tested the smtp from my pc (not teathered) and it works fine.
If anyone even has this problem, make me feel better that im not the only one. I have tried flashing to different ROMs and camera has never worked since 6.1 flash. I also installed radio version 1.4.8 and still coulnt send email. - could this be my internet settings?
Thanks to all who can help!
Click to expand...
Click to collapse
Did you flash to a stable ROM (eg original WM 6 ROM) before fashing Pay's ROM? My two cents; try flashing your phone again, this time flash to an original wm6 ROM like a AT&T ROM, soft-reset before customizations start, then flash Pay's ROM. Hope this helps.
Soft reset before customizations start?
When the phone turns on for the first time after flash - before the customization screen? Is that what is meant by that?
I would definatly flash to an offical AT&T ROM and then see what happens..
I had installed the official WM6 rom - camera did not work. Did not set up email so i dont know if that worked. I also installed a custom ATT specific rom which camera did not work.
Why would i have all other types of internet access except outgoing email?
Camera problem
I get that from time to time on my 8525 (Hermes). The fix is simple, unplug the phone from any power source, pop out the battery, wait about 20-30 seconds and place the battery back in.
In the old "PDA only" world, this is what we'd call a Battery Reset. More effective than a Soft Reset and not as drastic as a Hard Reset.
When my 8525 (Hermes) Camera stops working, as well as the flashlight and all, I do this little trick and it fixes it every time.
I hope this fixes things for you!
I am having the same problem with my 8525 running pays rom tried everything still can't send email. tried flashing to an official att rom same problem problem started only after i flashed to pays rom....help.
Camera problem
I Flashed my XDA Stellar with supposedly the official wm6.1 rom. Now my TOM TOM takes forever to get a fix and although my camera still takes pictures, there is no view finder image to show me what im looking at. Dissapointing.
hello,every one
Hello everybody,my name is fantasyer,glad to be here,and gald to be part of you.To be a freshman here, like most of you, I feel excited and a little nervous as well, I hope we can look after each other and enjoy the four years in university.I had learn PS. I am a very outgoing young guy/girl, as all you can see.
I love basketball, if any of you have the same hobby as I do, I would be very happy to have discussions with you.I hope you all can remember me,fantasyer happy guy ike the sunshine. Glad to be your friend, thank you
Hi,
i am facing this weird issue of certain calls that come into my Hermes (now flashed with K's Lite ROM and 1.48.00 Radio) appearing on call history as a future event like a call that I'd receive on 10 am (current time which my PDA is set to) today would show the time1.30 pm today!!!! These items always sit first on the list and redialing becomes an issue. :confused
It's not happening with all the calls, I suspect if it's the calls that I receive while the phone's on standby.
i used to have this issue in some other ROMs too and am not too sure if it's a ROM thing. I downgraded from WM6.1 to WM6 to check this. Need help badly on this Thanks.
Riyaz
Could someone pls help???
Can some one Pls tell me what to do.. need Ur help badly
Rgrds
Riyaz
Ill think it could be a bug in your "old" rom.
Just flash:
1. official AT&T WM6 Rom
2. Radio 1.54.30.10 (best one i have ever tested)
3. PDAVIET WM6.1 19400 (or 19209) Black & Clean Rom
Ill now running the 19209 for about 2 Weeks without any problems and its horrible fast
cu
pOpY
Thanks
Hi popy2006,
Thanks for the info pal.. I am a great PDAVIET fan myself for prophet... Cloudyfa has ensured that I still havent thrown away rophet and seems never will
i've tried black and clean and green and clean before but both gave me serious hard resets (evenafter AT&T flash)
so thought I'll go back to the WM6.
thanks for the info anyway
Riyaz
Hi. Try to disable SD Card Power Management. I have found an other thread here: http://forum.xda-developers.com/showthread.php?t=378750
Whis guy have the same problems. After deactivating the SD Power Management, his ROM running quite well.
Hope this helps you.
cu
pOpY
Seems working - testing Now
Hey pal,
seems to work testing now... Hope this stays same Thanks
riyaz