I have a bluetooth gps reciever. Mark qstarz gps 818x. The htc desire sees the reciever and connects, but then says paired. disconnected.
Is there a way to add GPS method.
And i can't see the reciever in my location in the menu.
There are more people with this problem or knows someone a solution
Thanks Roy Timmermans
roy2900 said:
I have a bluetooth gps reciever. Mark qstarz gps 818x. The htc desire sees the reciever and connects, but then says paired. disconnected.
Is there a way to add GPS method.
Thanks Roy Timmermans
Click to expand...
Click to collapse
Any particular reason for not using the built in GPS receiver?
No but it saves battery and this gps mouse has 64 satellites. I want to know why he does not work. And curiosity
I'm not 100% sure but I didn't think there were 64 gps satalites?
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
I've checked. There are 66 channels which can be exploited. for fast acquisition.
You wont get a faster acquisition than the desire, unless you tell your gps unit roughly where it is in the world.
The desire already knows this, and that's why it locks so quickly
Fon22
But the main question about connection between Desire and b/t gps, remain!
Once paired you have to press 'connect'. That's what I had to do with a bluetooth stero unit.
Hey there, I'm also having this issue. I have the same GPS Unit and was wondering if I could use it to enhance the accuracy of my current GPS setup? Currently it says the accuracy is within 100 meters. With my old phone I was able to get it to within 2 meters using my bluetooth receiver. I have tried the "hitting the connect" but am unable to find that button, otherwise I'm sure it would be an obvious option. Does anyone else have any ideas?
Related
Dont know if anyone else has come across this problem or my gps is crap. Takes ages and very clear sky to find satellites. apart from that when i go through blackwall tunnel the gps stops (obvious reasons) but then does not start again on the other side. what i dont understand is why cant it connect to satellites like in-car navigation systems.
Do you think a gps aerial will make a difference??
Definately,
I have a GPS antenna, and it improves reception greatly usual satellite locks of between 8 - 12 sats and quick TTFF
What GPS reciever are you using ?
Do you have recieve all incoming beams unckecked ?
You will find it here :- Start/settings/connections/Beam.
I have an M1000 and an O2 XDA II and both lock on and get a fix in less than 30 seconds I am using the tomtom bluetooth GPS reciever with tomtom 5.
What GPS reciever are you using ?
Do you have recieve all incoming beams unckecked ?
You will find it here :- Start/settings/connections/Beam.
I have an M1000 and an O2 XDA II and both lock on and get a fix in less than 30 seconds I am using the tomtom bluetooth GPS reciever with tomtom 5.
I have got a socket/EMTEC Blutooth GPS that i have had for years, it cost me over £200 when i first bought it and i have never had a problem at all once i bought an antenna for it (the antenna was a no name solution)
as for the incoming beam settings, it makes no difference to me with or without it set, but i personally leave it not set to save battery life as i have never had a need to use it in over 4 years of having a pocketpc
Ok this might sound a bit dumb to you guys but I'm having a little situation here.
I got tomtom 5.1 and just got the glabalsat bt338 receiver.
I have paired the device with my xda as I have paired a nokia BT headset.
When I switch on the nokia headset and bluetooth, the pda and headset establish a connection automatically.
I would like to do the same for the bt338. As soon as the bluetooth is on, it should establish a connection.
I am not able to do this. I have to click on the bluetooth manager, double click the bt338 for it to establish the connection. Then I have to exit bt manager and turn on tom tom. Still tomtom does not detect the GPS receiver until I click on the GPS device settings and select OTHER BT RECEIVER and then select Blutooth receiver on COM5.
Only then does the GPS show any life.
I would like to know how to get the BT338 to work by just turning on TOMTOM.
It should authenticate and establish the connection on its own, and by the time its up, i should be able to input a destination.
Confusing? No?
easy there mate, give it time....once you have the BT338 paired with your handset, switch everything off.
then 1st switch on your BT338, then switch on your PDA...start up TomTom and leave it for at least 1 minute...it should switch on Bluetooth automatically and connect to the BT338, i had this issue and the 5.1 update solved it...let us know if successful.
Greetings,
I have tomtom navigator installed on my XDA IIs and i have polstar bluetooth GPS, BT 111, they both work fine and excellent, but the problem is, the next time when i switch on the bluetooth gps and tomtom on my XDA, tomtom doesnt detect the gps itself, I mean i have to delete the bluetooth entry in the bt manager of XDA and i have to add this new bt connection and all the bt setup again, why is it, can someone please tell me the solution to it, i mean like is it possible tht everytime i switch on tomtom on XDA it automatically detects my bt gps receivers.
Plz, thanks in advance
cheers
First of all make sure you have TomTom Navigator version 5,21 loaded on the device. Then create th ebond between the devices, and set TomTom up to use "Other Bluetooth GPS". If you have done all this how long are you waiting for the XDA to switch on the BT and find the GPS? it can take upto 45 seconds on some devices, if you need TTN5,21 download it from www.tomtom.com as it is free - Mike
I'm running TTN 5.21 on my XDA IIs with no problems, I don't even need to do anything with the bluetooth, it automatically turns on the bluetooth when I start TTN and turns it off when I close, and it automatically picks up my TT BT GPS dongle. Although there is a max 5 min wait to get a valid GPS signal.
I installed the 5.0 version then used the update from the web site afterwards.
Gav
Hello, I have installed TomTom Navigator 5 in my Qtek s200, but I can't connect it with the bluetooth GPS if the telephone is switched off.
Tomtom runs ok, but doesn't find GPS device.
If I switch on the telephone there isn't any problem, tomtom runs ok and find the GPS device.
I have used tomtom, and dell GPS bluetooth GPS reveivers.
Someone knows if is there a solution to use the GPS with the telephone utility switched off?
Thanks!
ive got this problem too with my xda 1 which i only use as a satnav unit
I use the xda with a wired gps but tomtom complains there is no gps device because the unit is in flight mode, even tho im not trying to use any wireless signals.
anyone help ?
thanks.
I don't know if I understand you right, but I might have an explanation for this. On my Qtek 9100, I can't use a bluetooth GPS-receiver when the device is in flight-mode. Flightmode disables all radiosignals...and since bluetooth is sort of a radio signal, it's disabled as well
A solution might be to turn off and on your device and "cancel" when you're asked to enter your SIMs PIN-code. This way, the device is not in flight mode (so bluetooth works) but the telephone-reception is disabled.
I hope this helps, if not: let me know!
--Marc
yes that works but the phone device is still switched on so uses battery
the gps in question in my situation is a wired unit going directly to my old xda 1's com port so shouldnt matter if the phone or bluetooth are on or not. Even if the pda was in flight mode it shouldnt affect use of my wired gps as there are no radio signals.
seems like a 'bug' in the tomtom software that if the pda is in any kind of flight mode including the phone being off, it decides it cant communicate with any gps, no matter how its connected, as if they expect everyone to be using bluetooth gps' and just include the wired configuration as a legacy function.
malty
maltloaf said:
yes that works but the phone device is still switched on so uses battery
the gps in question in my situation is a wired unit going directly to my old xda 1's com port so shouldnt matter if the phone or bluetooth are on or not. Even if the pda was in flight mode it shouldnt affect use of my wired gps as there are no radio signals.
seems like a 'bug' in the tomtom software that if the pda is in any kind of flight mode including the phone being off, it decides it cant communicate with any gps, no matter how its connected, as if they expect everyone to be using bluetooth gps' and just include the wired configuration as a legacy function.
malty
Click to expand...
Click to collapse
Darn...sorry, I misunderstood. I'm using a bluetooth GPS-receiver myself, so I just took for granted that you also used a bluetooth device And indeed, looks like a bug...not very convenient.
--Marc
Concerning bluetooth devices:
This seems not to work with Windows Mobile 5.0.
With Pocket PC 2003 devices it is possible to use with TomTom bluetooth while in flight mode.
Here's a work around for Win 5.0:
1) Enable the phone and bluetooth in the Comm. manager.
2) Make the link to thte bluetooth gps in TomTom.
3) Disable the phone in the Comm. manager.
4) Return to TomTom.
The bluetooth link will be maintained until you exit Tomtom or try to link again.
This might also be the case with a wired gps.
AJ.
Seeing as I can't get a satellite lock with the internal GPS on my Archos 80 G9 (running stock 4.0.6) I was wondering if it would be worth getting a bluetooth GPS module.
I can pick one up for about £15 on eBay and there are a couple of apps on the Play store that are designed to support these modules.
Has anyone tried one of these with their G9?
What are your experiences?
Alternatively does anyone know for sure if Archos are planning any upgrades to their firmware specifically to address the GPS issues that many appear to be having?
(I know that for some people the internal GPS is working fine on their G9, but it seems it's a bit like the wi-fi issue where some people are unaffected and yet others are having problems)
When you are in the house, you never have a chance to get a signal
Did you try it outside?! And did you wait a little bit?! My Galaxy 5 needs 4-5 mins
to get a fix-sattelite! Normaly you shouldn´t have problems with that...
And Archos is updating their firmware more or less every 4 weeks! So you have a good chance to get a fix for that, if it´s a bug...
Yeah I took my tablet out to an open field last weekend and left it for well over an hour and didn't even catch a glimpse of one satellite.
My daughter has a cheap ZTE phone and can always get an instant lock. Makes me jealous!
Have you tried?
This may seem like a dumb answer but I have found that my 80g9 sometimes loses GPS lock and all satellites if I have been indoors for a while or had the tablet on sleep. If I then turn off the GPS under settings and then re enable the GPS works fine. Hope this helps.
Thanks for the advice but I have tried your suggestion.
I have tried everything conceivable with no success.
It might be considered bad form but I'll reply to my own original question anyway.
I bought a Bluetooth GPS keyring from eBay for £7 inc. delivery and along with the Bluetooth GPS app I'm getting great results.
Might help someone in future...
Extreme_One said:
It might be considered bad form but I'll reply to my own original question anyway.
I bought a Bluetooth GPS keyring from eBay for £7 inc. delivery and along with the Bluetooth GPS app I'm getting great results.
Might help someone in future...
Click to expand...
Click to collapse
hi,
you are not alone
i have the same problem with my 101g9. gps did not work at all since honeycomb until ics 4.07 on my tablet.
can you tell us which gps mouse do you have and which bluetooth app is in use? i'm interesting to hear more about a working combination because archos cannot fix the gps problem for all devices (i guess). seems, i need an external bt receiver too.
thanks for info
I use "Bluetooth GPS" by "Googoo Android" from Google Play to connect.
The receiver is listed on eBay as "Vodafone keyring receiver 51 ch GPS sat nav receiver for laptops and mobiles"
I bought this because it is so small; really handy to keep on my keyring.
The seller seems to have loads of the same for sale.
I hope this is useful.
yep, very useful.
thanks a lot
holux
Hi,
I can use my Holux M-1200 USB Gps, on my G101. It works far, far, better than the built in GPS. It locks on many satellites even in the house.
I cannot use the Archos one on V4.06, only on V 3.2.80 and ONLY with WiFi assist on!
The Archos GPS really sucks!
cheers
P
superpat999 said:
Hi,
I can use my Holux M-1200 USB Gps, on my G101. It works far, far, better than the built in GPS. It locks on many satellites even in the house.
I cannot use the Archos one on V4.06, only on V 3.2.80 and ONLY with WiFi assist on!
The Archos GPS really sucks!
cheers
P
Click to expand...
Click to collapse
hi,
the holux m-1200 can work as bluetooth device or over usb cable. you use it via usb?
Holux Bluetooth
Hi,
Yes, The M-1200 works well on Bluetooth.
There are a number of steps to take to get it working.
1. Install Bluetooth GPS from Play.com
2. Go to Settings and turn OFF GPS, and Google location services
4. In Settings go to Developer options and turn ON "Allow Mock Locations"
5. Pair and connect Holux M-1200 to Archos tablet.
6. Run Bluetooth GPS. On its main page enable mock GPS Provider, and Connect.
7. If it doesn't connect, go to Bluetooth GPS settings and try various settings in "Connection Problems related". ( I ticked all three choices)
run any GPS app, Syric, mmTracker, Google maps, they all work fine!
cheers
Patrick