Related
I have black wm6 rom and would like to get rid of some of the extra stuff installed, but when I try and delte the .exe files and the links to them it wont let me. How do I get around this?
Thanks,
Jason
JasonYng said:
I have black wm6 rom and would like to get rid of some of the extra stuff installed, but when I try and delte the .exe files and the links to them it wont let me. How do I get around this?
Thanks,
Jason
Click to expand...
Click to collapse
this is not a specific wm6 question, just general windows question,
if you searched u will find the answer on how to delete ROM fliles
I have searched and still cant seem to find a way of doing it with out cooking my own rom. Is that the only way of accomplishing this?
JasonYng said:
I have searched and still cant seem to find a way of doing it with out cooking my own rom. Is that the only way of accomplishing this?
Click to expand...
Click to collapse
hint: RESCO EXPLORER
I tired that game me the same problem said ti could not be deleted becasue it was a rom file. Switched it form read only and it did the same thing. Is there a different setting in resco?
Is there a sticky on how to install these programs, Im using the 6.1 and phone is synced, just not sure what to do now. Thanks
biglarge said:
Is there a sticky on how to install these programs, Im using the 6.1 and phone is synced, just not sure what to do now. Thanks
Click to expand...
Click to collapse
http://www.google.com/gmm/index.html?utm_source=us-et-more&utm_medium=et&utm_campaign=gmm
Thanks, but I meant if Im installing these where do I put them on the phone, also Ive tried several times on the keyboard thing for english and nothing worked. Thanks again for any help on this.
biglarge said:
Thanks, but I meant if Im installing these where do I put them on the phone, also Ive tried several times on the keyboard thing for english and nothing worked. Thanks again for any help on this.
Click to expand...
Click to collapse
If its a cab file you're trying to install, copy it anywhere on the phone. Then using file explorer on your phone, click on the cab file and installation will begin.
If its an exe file, these install from your pc through Activesync. On your pc(with phone connected), click on the exe file and it will copy the files to your phone. It will then tell you to check your phone, which will then look like you had just started a cab file installation.
If either cab or exe asks you if you want to install to device or storage card, it should be your choice unless the creator has specified otherwise.
Some files require rebooting the phone after installation. Most will tell you before they reboot, and some creators will tell you its necessary. In this case you should manually reboot it if the installation doesn't automatically do it for you.
just out of curiosity. how did you manage to flash 6.1 on the phone when you are unsure of how to install a simple application?
gixxum said:
just out of curiosity. how did you manage to flash 6.1 on the phone when you are unsure of how to install a simple application?
Click to expand...
Click to collapse
Via distructions maybee?
And curiosity killed the hamster.
Thanks Stylez, couldnt have said it better myself, Later
Very confused
Guys, Ive been reading and experimenting on adding programs and have failed. Ive got 6.1 installed, now Im trying to do the english keyboard and install sirius, I put it on the phone and click on the setup it does a bunch of stuff and thats it. Thanks for any help on this
biglarge said:
Guys, Ive been reading and experimenting on adding programs and have failed. Ive got 6.1 installed, now Im trying to do the english keyboard and install sirius, I put it on the phone and click on the setup it does a bunch of stuff and thats it. Thanks for any help on this
Click to expand...
Click to collapse
what kind of stuff? like does the phone do backflips or break dance?
be a little more specific man..
for the keyboard go look in the sticky ontop of this forum and download the keyboard file to your pc. plug your phone into the pc and let it sync. then take that file and through activesync > explorer put it on your phone
on your phone, go to where that file is located and just execute it..install to device. then reboot the phone when its done installing.
Stop opening new threads for the same topic...first last warning.
Keep using the same thread.
stylez said:
Via distructions maybee?
And curiosity killed the hamster.
Click to expand...
Click to collapse
there are sticky's full of instructions for installing new roms....followed by 1000 pages of the same questions and the same answers.
i wasnt trying to be a jerk.i was honestly asking because id like to know how he installed his 6.1 so we can try to make it a lot easier on n00bs that ask the same questions time and time again. since he seems like a new user, hes the one to ask right?
gixxum said:
there are sticky's full of instructions for installing new roms....followed by 1000 pages of the same questions and the same answers.
i wasnt trying to be a jerk.i was honestly asking because id like to know how he installed his 6.1 so we can try to make it a lot easier on n00bs that ask the same questions time and time again. since he seems like a new user, hes the one to ask right?
Click to expand...
Click to collapse
You honestly think hes the one? I didn't think installing cabs was that hard. Put cab on phone, click on it from explorer, and wait just a bit, Done. I really don't think he is the chosen one. In fact, I would venture a guess that it was pure luck he was able to get 6.1 flashed at all. No offense. I nominate Gixxum to be his personal tutor
which is why id like to know how or what instructions he followed.
I didn't think you was being a jerk, infact i found your answer rather commicle, so i had to reply with comedy, i just imagined he followed the forum thread and think from his answer i was correct? But maybe not?
Biglarge what's the answer?
gixxum said:
there are sticky's full of instructions for installing new roms....followed by 1000 pages of the same questions and the same answers.
i wasnt trying to be a jerk.i was honestly asking because id like to know how he installed his 6.1 so we can try to make it a lot easier on n00bs that ask the same questions time and time again. since he seems like a new user, hes the one to ask right?
Click to expand...
Click to collapse
Im glad you guys are having fun at my expense, this is how I figured it out. It was posted in this forum, I wish I had the name on it, but I give thanks to ever wrote this and am sorry I didnt have the nameHeres how to beat the 270 error.
When running the installer, "push any key" through the first few steps as it says.
When the queue comes up saying "press center key and screen should turn white", "press any key to continue"
FIRST - press any key, to bring up the next queue
SECOND - now push the center button on your phone, and it should turn white
THIRD - push any key on your PC to start the actual flash.
If you do step 2 before 1, it will still continue onto the flash screens, but will Error 270 at 1-10%.....
Hope this helps some of you!
Reply With Quote
This was the little thing that made all the difference for me. I have done my reading. Thanks to alll
Oh and sorry for the second post on same subject .
biglarge said:
Im glad you guys are having fun at my expense, this is how I figured it out.
Click to expand...
Click to collapse
Maybe if next time you are more clear with what you are trying to get help on. We can help you.
Error 720 is/has nothing to do with "Installing programs"
Think about it.
That was regards to gixxum, and in my post of installing programs, I clearly stated installing the keyboard and I believe the sirius program. I am sorry for all the confusion. Later
Mikey1022 said:
Maybe if next time you are more clear with what you are trying to get help on. We can help you.
Error 720 is/has nothing to do with "Installing programs"
Think about it.
Click to expand...
Click to collapse
I know I use a blackjack, but whats the 720 error?
BigLarge: we're just trying to have fun, did you get your cabs installed?
Im almost afraid to say it, but no, I put them on the phone and it seems to install but nothing after that, I have learned to type with what ever text is on there though.
oh and i used this (tayutama one because i didnt find superuser app) forum.xda-developers.com/showpost.php?p=7587405&postcount=417
it looks to me as your playlogos1 is messed up (sound but no boot animation). i guess by
i reseted my phone from the boot menu
Click to expand...
Click to collapse
you mean you did a wipe/factory reset from recovery?
if so, i guess you have to reflash with odin. you could use adb to connect to the phone from recovery and try to fix the problem manually but i guess thats no an option for you ... reflash is the fastest method to get your phone running again ...
yes, i did the factory reset. i want no longer to be wrong, so can you please give me some newbie steps to do the reflash or at least a link? thank you very much, i am no longer in panic!
messerschmidtastropuf38 said:
... so can you please give me some newbie steps to do the reflash or at least a link?
Click to expand...
Click to collapse
read flash firmware using odin. i recommend one of the jmX firmwares. the newest of them being WXJM7
thanks a lot for the help, i will never forget you. i was scared of losing the warranty and not solving this issue. if i am right, the method will work because i didnt know that you can make an entrance to the system. i checked the download mode and it works, i am now stuck with my pc until i repair it and on the firmware. 2 questions: 1. if the drivers of the sgs are installed, do i need to remove kies and reinstall it or something like that? and 2. if i did the factory reset, was the internal sd card formatted? thanks a lot again.
messerschmidtastropuf38 said:
2 questions: 1. if the drivers of the sgs are installed, do i need to remove kies and reinstall it or something like that? and 2. if i did the factory reset, was the internal sd card formatted? thanks a lot again.
Click to expand...
Click to collapse
1)Hi there. There is no need to uninstall/reinstall kies, in fact u do not have to open it to be able to use odin. You can view this video tutorial first part and second part for illustration purposes. If you are unable to connect to odin you can open kies and reinstall your drivers with it.
2) As far as I know when you do a factory reset only your system reserved partition of your internal sdcard is formatted. The rest of your data in /SDCARD will remain untouched.
Senior members pls correct me if I'm wrong.
messerschmidtastropuf38 said:
i was scared of losing the warranty and not solving this issue.
Click to expand...
Click to collapse
theoretically you WILL loose your warranty when you use odin to flash a firmware, in reality the will never find out as long as you don't brick it during flashing...if you want to be 100% on the save side (regarding the warranty) you can also flash the original firmware (JF3 for me) back. personally i would not worry about that ...
jana999 said:
Senior members pls correct me if I'm wrong.
Click to expand...
Click to collapse
no, you are in fact completely right
now that i know that this method can not fail i dont care about the warranty., what is the differences between firmwares and should i use the latest one?
messerschmidtastropuf38 said:
now that i know that this method can not fail i dont care about the warranty., what is the differences between firmwares and should i use the latest one?
Click to expand...
Click to collapse
as i wrote above i recommend a JMX one (JM6 or JM7) as they are really stable. i use JPC (android 2.2) which works well for me but there are people reporting serious problems like locked phones and overwritten IMEI's. therefore i wouldn't recommend this for unexperienced people...
i don't want to worry you but there are people who managed to brick their phones with odin. it's very very unlikely if you follow the instructions precisely. just that you know ... read the howto's carefully before proceeding!
Again..
Please DO NOT SPAM THIS FORUM! Why do you all post your questions in "ANDROID DEVELOPMENT", where there is the "Questions and Answers" forum? This way you steal space for DEV apps and useful stuffs without a reason.
m3talm0rph said:
Please DO NOT SPAM THIS FORUM! Why do you all post your questions in "ANDROID DEVELOPMENT", where there is the "Questions and Answers" forum? This way you steal space for DEV apps and useful stuffs without a reason.
Click to expand...
Click to collapse
i agree but desperate people don't care about forum-rules which is why we have so many threads like this in the dev section. i guess the only way to solve this would be if an admin/mod would manually move them
i will consider this and i understand that it has some risk, but i think this is my only chance. also, i hope the 0.05 percent chance of a major electricity fail will not ruine my phone. for clarifying: is this reflash like the windows reinstalation with different update packs? if the process will be done completely, is there a chance for the black screen will be still there? i am a little nervous, not scared as the first time, but if the process dont work, is there any chance to repair it through samsung with some costs?
messerschmidtastropuf38 said:
i will consider this and i understand that it has some risk, but i think this is my only chance. also, i hope the 0.05 percent chance of a major electricity fail will not ruine my phone. for clarifying: is this reflash like the windows reinstalation with different update packs? if the process will be done completely, is there a chance for the black screen will be still there? i am a little nervous, not scared as the first time, but if the process dont work, is there any chance to repair it through samsung with some costs?
Click to expand...
Click to collapse
Hey there buddy.
I can see that you are really concerned about messing things up. But really, don't worry. It has some down falls, but flashing with Odin is might safe. And as was earlier recommended, you can try flashing to either JM6 or JM7. Both are very stable releases. Here are a couple of links, one for the JM6 and the other for JM7. Trust me when I say this, IT WILL BE ALL RIGHT.....
JM6: http://forum.xda-developers.com/showthread.php?t=765032
JM7: http://forum.xda-developers.com/showthread.php?t=770821
This is another link to a brilliant post by Darkstriker. This is a well thought of FAQ's. It will guide you properly. Follow instructions to the letter and you will be all right.
http://forum.xda-developers.com/showthread.php?t=723596
It would also be a good idea to do a factory data reset after you are done flashing.
Take the plunge buddy. Be cool.....
Cheers....
Whoops.... Almost forgot. This is a link provided by Darkstriker in his FAQ. This is a faster website to download from. Let me give you direct links to the JM6 and the JM7 and the Odin and PIT files.
JM6
JM7
Odin And PIT File: https://www.wuala.com/Samsung Galax...Odin & Bootloader(.PIT)/Old/?key=AfzUZSU4SpKU
You will need both the files listed on the linked page (Odin and PIT File)
Plus you will also need the CSC files. Choose the correct one from the link below after finding the relevant info from the JM6 and JM7 links. If still in doubt, ask away.
CSC: https://www.wuala.com/Samsung Galax...C fo XWJM6, XFJM6 and XWJM7/?key=AfzUZSU4SpKU
it seems that i gave you something to work on. good, i will use one of these but i am not clear about the pda csc modem things. can someone tell me what i need to do at this step? i dont understand and i am thinkin about the apn settings... i hope i will get them. i dont think i longer have questions. thanks all!
messerschmidtastropuf38 said:
it seems that i gave you something to work on. good, i will use one of these but i am not clear about the pda csc modem things. can someone tell me what i need to do at this step? i dont understand and i am thinkin about the apn settings... i hope i will get them. i dont think i longer have questions. thanks all!
Click to expand...
Click to collapse
No problem. Will try and walk you through this.
After you have downloaded either of the JM6 or the JM7, and you have extracted the files, you will see the PDA and the modem files. You will also have to download the relevant CSC file that is specific to your region. Also, make sure that Odin and the PIT files have been downloaded.
Let me give you simple steps to work your way through.
1. Make sure Samsung Kies is NOT RUNNING including in the notification area.
2. Disconnect your phone and switch it off.
3. Start Odin
4. Make sure the three options, "Re-Partition", "Auto Reboot" and "F. Reset Time" are TICKED
5. Click on the "PIT" button and select the "s1_odin_20100512" file you downloaded.
6. Put your phone into download mode by using the key combination: POWER DOWN + HOME KEY + POWER KEY. When you see the yellow triangle, release all buttons.
7. Connect your phone and wait for the drivers to get installed.
8. Click on the "Start" button and wait for the process to finish. This will be indicated by the words "PASS" with a green background. DO NOT DISCONNECT THE PHONE TILL YOU SEE THE WORDS "PASS"
9. Remove the battery and put the phone into download mode again. (Step 6)
10. In Odin, click the "Reset" button and UNCHECK the "Re-Partition" option and keep the remaining two options CHECKED.
11. Click the "PDA" button and select the file starting with "CODE"
12. Click the "PHONE" button and select the file starting with "MODEM"
13. Click the "CSC" button and select the CSC file which you have chosen. (NOTE: You will have to extract the file from the CSC package you have downloaded and not the actual archive)
14. Connect the phone
15. Click on the "START" button and wait till Odin finishes its process. Again, DO NOT DISCONNECT THE PHONE TILL ODIN DISPLAYS THE "PASS" MESSAGE!!!!
16. If you are using Multi CSC, follow the instructions from any of the posts for JM6 and JM7: "When using *Multi CSC* you need to type *#272*????# after the flash (in dialer). ???? being the current time displayed by phone. For example if the time is currently 6.25pm you need to type *#272*0625#. Then select the desired CSC version from the list and press "Install"."
You should be fine once these steps are done. They might seem very difficult at first glance, but they really aren't. If you still feel concerned about the process, I would suggest reading the entire post again just to familiarize yourself with the process. I was trembling the first time I did this and it turned out perfectly all right in the end. I am sure it will be the same for you.
Cheers....
thanks for the flashing guide for dummies. I think that it is the most complete guide for noobs. thanks again, i will tell you when i am done but now the computer annoys me so i need to wait...
messerschmidtastropuf38 said:
thanks for the flashing guide for dummies. I think that it is the most complete guide for noobs. thanks again, i will tell you when i am done but now the computer annoys me so i need to wait...
Click to expand...
Click to collapse
Hey, someone helped me out once too eh??
Dont worry. Get comfortable with the process and you will be good to go. Its nighty night for me unfortunately. But I am sure you wont need me any further on this now.
take your time doing it, and you will do it right.
Cheers....
Hello again community. I am writing now from my SGS. Wonder how? (I did not the reflash) I don't know, the phone just booted up this morning. I have no idea how but now I will try to not reboot my phone. I think the logo is broken and the factory reset worked.
I still have the MCR app, but the Quadrant scores around 870, so I am no longer rooted.
Thanks all, I surely will need your help sometime... I consider the rooting now not so scary because I understanded that I can not break my phone completely. I will update to Froyo when it will be official and I hope the problem is not any longer in my phone.
Cheers!
Edit: I found a folder in the internal sdcard named ase that has 2 subfolders. In «resources» folder there are 2 files: playlogos1 which is 0 kilos large and userinit.sh, also with 0 kilos. If I am right this is the reason which stopped my phone to boot. What to do with them?
m3talm0rph said:
Please DO NOT SPAM THIS FORUM! Why do you all post your questions in "ANDROID DEVELOPMENT", where there is the "Questions and Answers" forum? This way you steal space for DEV apps and useful stuffs without a reason.
Click to expand...
Click to collapse
Relax bro.. You'll live longer
So I am finally in front of my PC, but I don't know if when I will reboot my phone it will work. I have the superuser/MCR and the scripts still in my phone and I don't know what to do. I don't really understand why the playlogo1 and userinit.sh files have 0 kB and they are on my sdcard. I think they have something to do with this.That's why I am afraid of rebooting it... but sometime I will need it and I hope I will not have the problem. Also, if I will reflash my phone with JM6 or JM7, which lag fix do you recommend for me? (The phone sometimes really annoys me)
Thanks in advance...!
I'm going to root my epic 4g tomorrow just for mobile ap. I'm anoob and have never done anything on this phone before. I have searched the forums on how to add the mobile ap and the only thing I find is,root your epic then flash mobile ap. So my question, how do I flash ap after rooting?
amstaff72 said:
I'm going to root my epic 4g tomorrow just for mobile ap. I'm anoob and have never done anything on this phone before. I have searched the forums on how to add the mobile ap and the only thing I find is,root your epic then flash mobile ap. So my question, how do I flash ap after rooting?
Click to expand...
Click to collapse
well u really need to root for anything also u wanna do ........ but if u need wirless tether just download it from market and u are good to go.. no need of any flashing!!
I am needing to "flash" ap for a tablet I got. The regular tether won't work because of adhock. I am going to try and do the 1 click root and there are pretty good step by step directions for that. I'm just not sure what "flash" means exactly and how to do that for mobile ap. I've looked and can't find the directions like the rooting process has. I would like to learn and maybe do some new roms and kernals down the road too.
amstaff72 said:
I am needing to "flash" ap for a tablet I got. The regular tether won't work because of adhock. I am going to try and do the 1 click root and there are pretty good step by step directions for that. I'm just not sure what "flash" means exactly and how to do that for mobile ap. I've looked and can't find the directions like the rooting process has. I would like to learn and maybe do some new roms and kernals down the road too.
Click to expand...
Click to collapse
Continue to reaf up before you gret into any of that stuff. You can seriously damage your phone. just do your homework. We are not here to spoon feed you. Im not trying to be rude
Follow the instructions for the 1 click root and clock work mod recovery found in the wiki. Then follow the instructions in each thread that you wanna flash. In order to flash anything you need to be in cwm (clockwork mid recovery). To access cwm after installing you power off your phone. Once off you press and hold volume down, camera, and power untill you enter recovery. cwm has green text and that's where you wanna be. Samsung recovery had blue text you don't wanna be there. once in cwm you goto instal zip from sd card and choose the zip of what you wanna flash. Once your done flashing reboot your phone and you should be good. If you don't indeed my instructions then you shouldn't be modifing your phone to begin with. Like I said before read, read and re-read
Haterz gonna hate. Just keep hatin. I brush them haterz off. It ain't my fault my epic's e-penis is bigger then the evo's e-penis.
Spot on
He is right too many people in irc, asking questions that didn't read the wiki.
Its your phone if you value it please read the info posted.
I never mind helping but sometimes it gets frustrating ,when someone says whats Odin.
That lets me know they want a hand holding session.
Ill walk them through the process but at least read the wiki.
one of the things i dont understand is people want to wireless tether and say they have to root, this phone is capable of doing it out of the box. why root to do that?
Boomin - when you tether with the apps from market they are ad hock and not all devices work with that. If you root and use mobile ap you can tether tablets, other phones, 360's just more devices work.
ok , i guess i havent needed that so i never looked for those uses
I know some of you were able to learn all this without needing help or anything, but for me I get a little confused sometimes. I did read the wiki, that's how I knew what I needed, I read everything on 1 click rooting and 50 some pages on ap. The problem I get being new with this is some of the threads can be 100's of pages and by the time you get to page 10 the way to do what you're looking for has already changed 15 times, purple call the same thing different names, new things are added to download or flash and stuff like that. But believe me I understand why some get irritated. Anyway I was able to get it done and thanks for the help sorry for the ignorant question,but I'm sure it won't be my last one.
amstaff72 said:
I know some of you were able to learn all this without needing help or anything, but for me I get a little confused sometimes. I did read the wiki, that's how I knew what I needed, I read everything on 1 click rooting and 50 some pages on ap. The problem I get being new with this is some of the threads can be 100's of pages and by the time you get to page 10 the way to do what you're looking for has already changed 15 times, purple call the same thing different names, new things are added to download or flash and stuff like that. But believe me I understand why some get irritated. Anyway I was able to get it done and thanks for the help sorry for the ignorant question,but I'm sure it won't be my last one.
Click to expand...
Click to collapse
I'm glad you got it. Where here to help bu we can only hold your hand for so long. just do what you did for mobile ap everytime you got a question. Read, read, read some more. Search both xda and google. Search again then still nothing then ask.
Haterz gonna hate. Just keep hatin. I brush them haterz off. It ain't my fault my epic's e-penis is bigger then the evo's e-penis.
So instead of going into recovery mode to apply the mms gingerbread fix for cricket, I copy and pasted it right over the system apk. couldn't find where telephony was to copy and paste, so then got the idea of using recovery and applied the mms gingerbread.zip in recovery mode. now im getting an error and force close every time i try and open up messaging. Any help would be massively appreciated. Further help to get mms working after reading all the thread and trying multipul different mods to get it to work would be even more appreciated. Maybe posting up the original mms.apk file the phone comes with would solve the problem?
never mind just flashed a cutome rom and it works fine
most roms causing messaging to not work
Calbha said:
never mind just flashed a cutome rom and it works fine
Click to expand...
Click to collapse
After flashing and rooting my phone i tried 3 different custom roms. 1st cyanbread i think its called, i didn't like it at first cause it was a little confusing but all features of the phone worked. Then i tried slimbean, messaging did not work, then tried evio, messaging, contacts, and phone all cause system errors and wouldn't work.
Does anyone know if my phone is messed up or if its just bugs in the roms?
Calbha said:
After flashing and rooting my phone i tried 3 different custom roms. 1st cyanbread i think its called, i didn't like it at first cause it was a little confusing but all features of the phone worked. Then i tried slimbean, messaging did not work, then tried evio, messaging, contacts, and phone all cause system errors and wouldn't work.
Does anyone know if my phone is messed up or if its just bugs in the roms?
Click to expand...
Click to collapse
Unfortunately, those are not just bugs. I do not have Cricket, so I'm not sure how to fix this, but you can try the following:
1. Go into recovery. (Hopefully you have Amon-RA, if not you can still try this.)
2. Wipe everything.
3. Put a nice rom on your sd card, and go into recovery and flash.
4. Do whatever you need to do so Cricket will work, but make sure you follow the instructions exactly as in the OP or video.
Post back and let me know what happens. Otherwise, private message @jlmancuso or @Wambo_Bomb -- I believe they have Cricket.
nate234 said:
Unfortunately, those are not just bugs. I do not have Cricket, so I'm not sure how to fix this, but you can try the following:
1. Go into recovery. (Hopefully you have Amon-RA, if not you can still try this.)
2. Wipe everything.
3. Put a nice rom on your sd card, and go into recovery and flash.
4. Do whatever you need to do so Cricket will work, but make sure you follow the instructions exactly as in the OP or video.
Post back and let me know what happens. Otherwise, private message @jlmancuso or @Wambo_Bomb -- I believe they have Cricket.
Click to expand...
Click to collapse
Thank you so much for the quick responce. I am running cyanogenmod Tom and though there's alot I like, there's alot I don't. Forexsaplei think its absurd they've intergrated 2 launchers, (adw and legacey) (adw, seems to be a resource hog )into it where they can't be easily removed and the launcher of my choosing put on. Or the fact that I can't easily go into diagnisticmode for qpst. Honestly I'd rather keep the HTC sense Tom as that's what was made specifically for the phone, however as said mms fixes or any other rom will cause forceclose errors. I already tried what you described above, so I guess I'm stuck with cyanogen until I can figure a fix.
Once again thanks for the quick responce that was not sarcastic and containing more info than, "Google it" I see that alot on here n most people are brought to this forum from Googling their problems. As a person new to programing and flashing phonesits frusterating to see that. If you don't want to answer then don't respond. No need to belittle someone or tease them with, "I could help you but I'm better than that."
Calbha said:
Thank you so much for the quick responce. I am running cyanogenmod Tom and though there's alot I like, there's alot I don't. Forexsaplei think its absurd they've intergrated 2 launchers, (adw and legacey) (adw, seems to be a resource hog )into it where they can't be easily removed and the launcher of my choosing put on. Or the fact that I can't easily go into diagnisticmode for qpst. Honestly I'd rather keep the HTC sense Tom as that's what was made specifically for the phone, however as said mms fixes or any other rom will cause forceclose errors. I already tried what you described above, so I guess I'm stuck with cyanogen until I can figure a fix.
Once again thanks for the quick responce that was not sarcastic and containing more info than, "Google it" I see that alot on here n most people are brought to this forum from Googling their problems. As a person new to programing and flashing phonesits frusterating to see that. If you don't want to answer then don't respond. No need to belittle someone or tease them with, "I could help you but I'm better than that."
Click to expand...
Click to collapse
Hmm. Well, sorry I couldn't help you. Please try private messaging @Wambo_Bomb or @jlmancuso . They have Cricket and will be able to help you better either way. I'm a little off today, so I'm probably overlooking something. I'm on minimal sleep because my parents house has been flooding lately from heavy rain, and I've been trying to help them with that.