There is no touch screen input. The phone works fine but no touch input.
I did a hard reset. Nothing. Any ideas ?
Im thinking there might be something wrong with the screen itself. Maybe if I take the phone apart and put it back together I can see whats wrong with it.
Same thing happened to my Tilt 2 (stock ROM). I tried a soft reset, hard reset, and then reflashing the stock ROM again. Nothing worked, so AT&T warranty exchanged it.
I believe is a hardware problem... Maybe your Rhodium got wet or something like that... You shoul go to your carrier and ask them if the warranty cover that...
actually i had the same problem---BUT
I did fix the problem myself...when it first lost its touchscreen capability, i accidentally pushed up on the bottom of the touchscreen (bottom of the phone) for a brief moment and touched the screen while pushing on the bottom ---AND IT WORKED...but as soon as i stopped pushing up on the bottom of the phone...the touchscreen stopped working......so I simply took apart my phone till I reached the lcd/touchscreen---I even disconnected all the ribbon cables ... (I could not figure out what the problem was because I had originally thought a ribbon cable that goes to the touchscreen had been loose-but all the ribbon cables seemed intact while I took the phone apart)----so I decided just to put the phone back together - carefully AND as soon as I put the phone back together, I turned it on IT WORKED! No problems since...
I really did not want to send the phone back to att because the phone that they sent me was actually 1 phone out of 2...yes thats right I received 2 phones whenever I ordered my phone...they have been doing this for years now...so I dont feel bad
good luck if you decide to open ur phone apart - it was rough...and time consuming ... but if you have a little patience - u should be good
Thats good you were able to fix it..... the same thing happened to me with a htc fuze from att. they refused to warranty exchange it for me though and i had it for less then 3 months.....
Related
I got caught in that major downpour on saturday and my BA and Globalsat BT-338 GPS unit got soaked.
I dried them off in the car and tried the BA. It powered on, and on the blue imate screen (I flashed it with a PDA2K image) I saw a very brief bit of corruption on the screen. It got into windows then rebooted.
I got it home, dried some more, tried again. Dead as a doornail.
Put it in the cradle, the red "break call" button was dimly flashing. Not an even flash, a bzzt bzzt "I am shorting" kind of flash.
I immediately pulled it out of the cradle and left it to dry more overnight.
Today I tried it out of the cradle, still dead. Gingerly put it in cradle, the top right light went red (low battery I think this means) but no flashing break light so I left it and it went orange (indicating normal charging) after a while. I powered it on and it works. I still get the same brief bit of corruption just after the serial / rom ID screen on bootup.
It would not sync howver. I tried my lil-sync travel sync lead and that synced. I then had the idea of pulling the power plug out of the back of the cradle and letting it reset. It now syncs in the cradle.
All seemed good I thought. But I soon realised that the power button doesn't work. I cannot turn off the screen. If I hold the button down it toggles the backlight, so the button itself isn't broken, but I don't know what is...
I suppose I will have to call O2 and they will tell me to send it to a repair centre, but that will probably a) take ages and b) possibly cost loads.
I was thinking of taking it to a repair shop but I doubted they would know how to fix a BA. Also they may try to rip me off.
Any suggestions ?
Also if you know the best way of going about getting my globalsat BT-338 GPS repaired also that would be great. When I plug it in to charge the orange charging light flashes briefly but then nothing.
worst come to worst, install something like handymenu and make a quick action link for turn off, then assign that quicklink to one of the buttons to turn it off.
not sure that will work to turn it on though - unless you've worked out another way to do that?
When something gets wer, always take the battery straight out and thouroughly dry the inside with a hairdryer before trying to turn it on again. Probably not much help to you now though
I bet 02 will fix it for about £50.
I don't have a hair dryer - you need hair to make it worth having one and I haven't had any hair in years !
I will give O2 a call and see what they say.
I have a XDA2s for parts
Hallo
If you are interested i have O2 xda2s with brocen screen for parts exchange feel fre to contact me
07746555729
Take it to O2 just tell them it doesnt work and you dont know whats happened to it... play it dumb... always works for me. they replaced my entire screen with a brand new one for nothing and it only took under a week. It was so obviouse i had dropped it since ther was a clear dent at the top of the BA. only thing is that if they want to charge you for repair and you decide not to go ahead they will charge you to post it back to you.
DJUPLIFT
exactly what i did uplift
posted it in today, fingers crossed...
I think I am defo gonna get insurance if I get it working again, too much worry...
well I sent it in to the official repairers (Anovo) and they sent it back "Fixed under warranty"
Except that it was NOT fixed, it was displaying the exact same fault, which is SO easy to replicate, how the hell can they call it "Fixed" ???
So I call up O2 cust serv and tell them. They asked me to fax in receipt from repairers which I did and they said they would be sending me a brand new handset
Woohoo !
Well i was happy with o2 till i noticed a ****ING crack on the bottom left hand side of the screen. so i went back a week later cos i was working and didnt have time.
Told them that it was sent back to me like that and they basicaly said piss off.... said they couldnt do anything about it that i could have broken it anytime myself... fair enough. So now i have an xda with a cracked screen and anywhere down in the left corner i have to touch about 6mm to the left of
any button to press on it.
So pressing the New button is impossible.
I cant belive how they didnt even question about how the screen stopped working the first time, so why the hell cant they replace it again!?
Im proper pissed off :twisted:
Anyone know anybody that has a dead xda with a working screen id gladly pay good money for it!
annoying, but I would imagine the screen is quite easily replaceable.
It's gonna cost, but better than being left with a paperweight...
You guys are not gonna believe this...
So O2 send the new handset.
When I got it I decided to use my old battery until the new one had charged.
Guess what... same problem !!
IT WASNT THE PHONE IT WAS THE BATTERY !!!
So, if your XDA fails to go into standby mode when you hit the power button - don't suspect the phone, suspect the battery !
evilc said:
exactly what i did uplift
posted it in today, fingers crossed...
I think I am defo gonna get insurance if I get it working again, too much worry...
Click to expand...
Click to collapse
if u do, make sure u dont get it wet, cos o22 insurance wont cover water damage.
I can't use O2 insurance anyway, you can only insure with 02 within something like 14 days of purchase.
Got same crack but in the right-hand bottom...
I am using my device in landscape mode while waiting for a reasonably priced spare part donor. Rotating the screen usually helps.
DJUPLIFT said:
Well i was happy with o2 till i noticed a ****ING crack on the bottom left hand side of the screen. so i went back a week later cos i was working and didnt have time.
Told them that it was sent back to me like that and they basicaly said piss off.... said they couldnt do anything about it that i could have broken it anytime myself... fair enough. So now i have an xda with a cracked screen and anywhere down in the left corner i have to touch about 6mm to the left of
any button to press on it.
So pressing the New button is impossible.
I cant belive how they didnt even question about how the screen stopped working the first time, so why the hell cant they replace it again!?
Im proper pissed off :twisted:
Anyone know anybody that has a dead xda with a working screen id gladly pay good money for it!
Click to expand...
Click to collapse
Everyone has experienced some problems with their phone, whether its white screen/d-pad syndrome or some other fault.
Today my phone has decided not to turn on. It was working perfectly then all of a sudden screen went blank.
I have tried taking battery and sim card etc out and putting it back in. Phone won't even pick up charger.
I have had white screen of death before and dismantled my phone following alkizmo directions. This fixed my phone for a number of weeks, though problem started to re-appear.
Could this be whats caused my phone to switch off.
Does anyone have any ideas on how to get my phone to turn on again.
Warranty is well gone!!!
Seeing as there doesn't appear to be any ideas, I may go hunting for a new phone, though I'll probably take my hermes apart first!!
Fallen Spartan said:
....though I'll probably take my hermes apart first!!
Click to expand...
Click to collapse
Yeaaaaa, kill the bast...rd and go for Diamond
My hermes just started showing the same symptoms. None of the front buttons work, not even the leds... I took the phone apart i did the foam trick but it didn't work. However, it could be because the mail button is faulty (it doesn't click when pressed) so I've ordered a flex cable which includes that button. Its a good thing I've already pre-ordered the touch pro, so its not too much longer with my faulty hermes..
Title sums up my problem. I've got a T-Mobile Touch Pro 2 and I've got some water on it a few weeks ago. The wet seal on the battery and phone are both pink. I got a new battery and now the phone boots. It goes through the pink little T-Mobile screen, and then onto the black screen that says the phone wasn't shut off properly and this and that. It gives me the option to press the Volume-up key to do a hard reset, or press any other button to turn off or restart. The problem is that pressing volume-up, or any other key does not do anything. In fact, the only way to turn the phone off at this point, is by taking the battery out.
Can somebody please advise as to what I can do with this phone that is only 2 months old?
I believe the life/fate of your phone will depend on how quickly you acted right after the phone got wet. For instance did you immediately remove the battery and place the phone under a light or in a window where it could dry out? I even here sticking the phone in a bag of rice will help to draw out moisture. But if the phone has sat for weeks I would say it's safe to assume you phone has seen its last days. If you can take it apart and leave the individual components out to dry out and clean off any corrosion with alcohol and re-assemble. I wish I could offer better advice... Good luck it brings a tear to my eye to hear about a touch pro 2 broken down
Edit: Sorry I didnt realize you said that the screen does display. I would definitely try taking it apart and thoroughly cleaning things out and leaving it apart to dry for awhile. sending it in will get you no where (since pink water marks) and chances are HTC/T-mobile wont even send your broken phone back.
8gkl said:
Title sums up my problem. I've got a T-Mobile Touch Pro 2 and I've got some water on it a few weeks ago. The wet seal on the battery and phone are both pink. I got a new battery and now the phone boots. It goes through the pink little T-Mobile screen, and then onto the black screen that says the phone wasn't shut off properly and this and that. It gives me the option to press the Volume-up key to do a hard reset, or press any other button to turn off or restart. The problem is that pressing volume-up, or any other key does not do anything. In fact, the only way to turn the phone off at this point, is by taking the battery out.
Can somebody please advise as to what I can do with this phone that is only 2 months old?
Click to expand...
Click to collapse
You could also try connecting the phone to your pc, and run mymobiler. When the screen goes blank, maybe you will be able to have access to your phone through the program. You could back up whatever you needed, and would tell you if the lcd went out. Just a thought. Sorry to hear about that though.
Mymobiler says that it needs activesync functional in order to work. Activesync doesn't work for me. I tried it anyway and it wouldn't detect. Is there a stock htc touch pro 2 rom out there that is in NBH format so that I could stick it on my SD card?
The very same thing happened to my Touch Pro 2 a few days ago too!
My story is different. I had never had any water damage to the phone. On the 23rd of March, I installed the Deepshining ROM. It worked fine. The next morning, I went into T-Mobile to get the new HTC HD2. I turned off the Touch Pro 2 to retreive the SIM card, and then have been using the HD2 since. I tried to turn on the Touch Pro 2 for a few nights now. It just stays at the T-Mobile Stick Together screen until the battery is dead. I tried a soft reset while it was stuck on that screen, and received the error message just like the OP.
Can someone help me too? I am really worried that the phone is bricked. I can't get a new Touch Pro 2 under warranty since I am running on a custom ROM/radio.
I'm not sure if I can blame Deepshining. None of my previous ROM installs ever failed on me, and people seem to be installing the roms just fine.
Are you trying to conquer my thread? It's nice and all that you've got the same problem, but thread hijacking is frowned upon.
Sorry, the phone is physically damaged. There's not much you can do at this point.
Just as an update. Somehow, after installing the deepshining mod and trying it after a few days, it works fine now. It became very responsive, and I was able to install the original tmo 6.1 stock rom. Everything works fine, the only problem is that some of the physical qwerty keys either don't work or draw more than the needed letter/number. The power button doesn't function to turn the screen off, which really is about the only bummer. Everything works fine. Yay.
Don't know if anyone else is experiencing this with their Play but as of a week or two ago the backlight started acting strange. The backlight will randomly stay off when I push the power button with the slider gamepad closed. Only way to make it come on is to pop out the slider. It seems to be random, and if I push on the slider edge slightly with my thumb with the slider closed the backlight randomly flickers, ranging from slight to severe.
The display is still working despite the backlight issues, I can open apps, and use the phone normally but the backlight flickers on and off. Makes it especially hard to use the phone in the dark.
Phone has never been dropped once.
I've replicated this problem with a variety of roms, both custom and stock. It's definitely not app related or even custom kernel related. It happens on a fresh wipe with stock rom with stock kernel. It happens on CM7 with custom kernel.
I'm curious if anybody else is experiencing this. It would tell me if it's just an isolated incident or if others are having this problem.
Sounds like a faulty connection to the backlight to me.
I had the same problem 2 days ago. Then I couldn't get my phone screen on at all!
I sent my phone back to Sony, even thought I bought it second hand. Phoned them up and talked to them. They asked what time of year I bought it so I said around August and then they gave me the address to send it to. Now I'm just waiting to see what happens next.
If your going to send your phone to Sony for repair then make sure you put the fresh firmware back on and un-root your phone as that breaks the warranty (unless they don't know about it)
Hope I helped you. If I did then click the thanks button
Sounds like a faulty ribbon cable to me. (cable that connects the screen to the rest of the phone)
You wouldn't need to drop it for that to go bad, It could just be a case of opening and closing the gamepad or lot.
Yeah good thoughts, most likely the ribbon. That really sucks because I've only had the phone for 7 months, and I've taken excellent care of it. Sounds like a major design oversight.
Mine is probably near complete failure at this point. It's taking a lot more effort to keep the screen on now. Fearing soon it won't work at all.
In hopes that this might help someone else down the line, I was able to fix my problem. Yesterday the screen pretty much quit and I had no choice but to try and solve it myself or buy a new phone.
Using this disassembly video as a visual aid I carefully pulled my phone apart: http://www.youtube.com/watch?v=-3n5ZfkqhzE
You'll need a torx T5 tool to pull out all the screws but they are cheap.
Underneath the phone and jammed into the screen ribbon was a rather thick hair just hanging out. Somehow it buried itself in there. I removed it, unplugged and replugged the screen ribbon and cleaned the dusty inside with a q-tip and reassembled it all together.
It works fine now, so hopefully this helps someone else avoid having to pony up for a new phone. For those under warranty probably best to send back but for those like me with no warranty it's worth the shot.
noticed that my touchscreen is becoming unresponsive lately so i thought that changing the multitouch might solve it. the thing is, after selecting 4 touch, touchscreen becomes totally unresponsive. i tried wipe and even flashing stock os but touchscreen is still the same.
did i screw up my touch screen? how will i know? any known repairs or fix.
thanks
Sounds like your digitalizer (the glass above the screen) is busted and needs replacement. If your phone is under warranty, claim it, if not - get a new digitalizer and if you can't change it yourself, take it to a repair shop.
Changed the digitizer but still no response
Got a headache? It's all in your head!!!
switch ROM
You said that you flashed back to stock, but how about flashing to another ROM, I mean one that has a completly diferent multitouch enabler... that might work.
kherzad said:
You said that you flashed back to stock, but how about flashing to another ROM, I mean one that has a completly diferent multitouch enabler... that might work.
Click to expand...
Click to collapse
i was able to flash stock and it means i have no root nor recovery. and adb debugging is not enabled. i am out of ideas how i will be able to solve this.
After flashing stock ROM do you face the same issue with a new Digitizer?
yes. doesnt respond to anything except volume and power. even the 4 touch buttons doesn't work. i was thinking that i have received a bad digitizer or it is a motherboard issue. with the latter i have no idea how to check
salingpusa said:
yes. doesnt respond to anything except volume and power. even the 4 touch buttons doesn't work. i was thinking that i have received a bad digitizer or it is a motherboard issue. with the latter i have no idea how to check
Click to expand...
Click to collapse
I had recently taken my Defy to a service center. I just wanted to change the earpiece and the side casing. While replacing the side casing (while removing the Digitizer) they damaged the digitizer. The main touch portion was working but the 4 soft keys were not. They replaced the digitizer and everything was fine again (had to pay for it )
If you can carefully handle the phone, you can open up the casing and try reconnecting the digitizer to the board. (Do not remove the digitizer from the casing only reconnect the cable).
Replacement is better done by a service center as it requires careful handing.
I did open the phone, removed and reconnected the cable, still the same. also tried 2 new digitizer still the same result. I guess it us the mother board . Any ideas where to get replacement board ?
Thanks
Got a headache? It's all in your head!!!
i have got the same problem like you and i have solved it.
Do compass calibration like spin the phone 3 times in flat condition (laying down face up), then have the phone standing up and rotate 3 times, then on one side, rotate 3 times and then move your defy in the shape of number "8" in the air. Re-open the screen. it is suppose to bring back your screen work like it was nothing happened.
only for my defy i've tried never did this for another but from what i see you have nothing to lose here
Tried the calibrating thing and also a new digitizer. doesn't work. So it is the motherboard.
Anyone knows where to get mother board
Got a headache? It's all in your head!!!
Getting a new board is like getting a new phone - new IMEI, price for the board should be very similar to the pricw for a new phone too. If you think about it, it IS the phone. What's there in the phone other than the board a screen and a digitizer...
Guess you're right.
Got a headache? It's all in your head!!!