Help cant get pst settings for cricket... - Touch Pro2, Tilt 2 Windows Mobile General

Okay I have a Sprint Touch pro 2 I want to flash it to cricket, I have already ran the Hard SPL unlocker which then enabled me to flash various different ROMs onto the phone. The problem is that I cannot get the SPC to be all 0s so that I can get *228 to work on cricket. I already called Cricket and they have switched the phone over. I have also already installed a cricket carrier cab. I attempted to run the same protocol in Ryan mogul's thread using the BAF MSL Grabber but it wont work. Can someone please tell me what I am missing here. I have searched everywhere and nothing has proven helpful.

Related

HELP: EVO Flashed to Metro (No NAM Settings?)

Hello everyone.
I have a Sprint EVO 4G and it has S-OFF so I flashed it to 2.2 and used Rom Manager to put the stock 2.3.3 rooted deodexed onto it then went to Metro PCS and had them flash it over which they did for $10 then the guy could not get into the NAM setting to put my new phone number ect into the phone. He said usualy all they have to do is 000000 to get into the settings he called the metro techs and they said to reflash it which he did anyway by the end of this he asked me if I knew how to get into the settings which is what brings me here. He refunded my activation and kept the $10 for the flash. I kinow if anyoine can help me it's you guys. Thanks
Adam
OH YEA & P.S. to save another thread should anyone have the answer to this and I get this working on Metro (calls and texts only) can you either direct me to a thread to get the internet 3g and MMS working or give me the steps. Thanks again
download mls finder in the market
jamesrc2384 said:
download mls finder in the market
Click to expand...
Click to collapse
Did you mean "MSL Reader"?
Did u figure it out yet
hey..just wondering did you figure it out yet??? I'm having the same problem.. Thank you
Maybe this will somehow help... It's for flashing to Boost Mobile but perhaps...
http://forum.xda-developers.com/showthread.php?t=1182260
I had this happen to me the first time I tried to "Metroflash" my Evo. I went to three different stores thinking it was the operator, not knowing that when I flashed and rooted the evo, metro pcs could not set it up on their Houdini system. I went bare bones via hard reset (stock rom) and voila, metro got it on their system.
I followed this guide by Bloodykiller after it was rooted. http://forum.xda-developers.com/showthread.php?t=795182
Again, this is what worked for me. Hope this helps.

[Q] Get 'Unauthorized' when trying to make calls, will not OTA

I am using the Jiminy V Rom on Cricket
I am unable to OTA or make calls on the Cricket network. when I try and make a call I get 'Unauthorized' and when I try to OTA (*228) the system says 'unable' at the very beginning. I have done many EVO's to cricket before, and I have checked and double checked all my PST settings, my MEID/MIN/MDN/PRL particularly.
Even when OTA doesnt work , I can always get voice/text working on virtually any other phone by manually programming the MDN/MIN/Home SID & PRL.
My cricket home SID is 4923 & I am using PRL 32200
I have even loaded a working evo's PST settings into this phone (via QPST, read from one phone, write to another), and get same results even after making sure the MDN/MIN & MEID are correct.
The symptoms are exactly the same as if my MEID is not in the cricket system, yet I have triple checked them (and I had someone else program another phone with my MEID and that phone OTA'd and made calls on Cricket with no problem).
Some other data for consideration Android 2.1, build Baseband 2.15.00……007.25 kernel 2.6., Radio 2.05.00.06.10, HBOOT 0.79.0000 SHIP S-OFF
I have also tried factory builds 2.2 (3.26.651.6) and 2.1, (Baseband 2.05.00.06.10,Build 1.41.651.1) with same result. Note: they did not change the PST.
Is there a factory build which will put everything back to Sprint or should I consider updating the HBoot and /or Radio?, I assume the programming for the OTA is done in the Radio?
I am stumped.
Bump, If anybody can help me with this, its been driving me up the wall for two weeks now.,
Have you tried flashing an RUU and updating everything from there? If it isn't the MEID then it might just be your phone having a glitch. Flash it using RUU and let me know.
how do you reset PST/NAM (SPC,MIN,MDN, Etc) to factory?
I have tried RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe , hboot goes from 0.92 to 0.79, radio from 2.15 to 1.39.00.04.26, and android from 2.2 to 2.1.
But the pst/nam settings remain unchanged, mdn,min, sip, nai, etc are all cricket. even the SPC is still unlocked at 000000. ANd the S-OFF flag is off, Shouldnt the RUU's re-root the phone?
Is there an alternate way to run the RUU, I have tried putting the phone in HBOOT usb mode, then run the RUU but with three different batteries it tells me they are too low (under 30%).
Should I be in Hboot mode to run RUU? (I have been running it from the PC with the phone booted up.
To answer a couple of my own questions, none of the RUU's reset the EPST whether they where loaded from the PC via the .exe method or from the SD card PB31IMG method.
I found a reference to ##786# and found that yes that does reset the EPST (including the SPC) back to factory.
So I figured maybe the problem would be solved, so I updated PST for cricket (MDN,MIN,SID,PRL) and tried again, still no OTA and still 'Unauthoriized; when I try to make calls.
I am starting to believe I have a hardware problem, but how can most of the phone work and yet it have (apparently) problems transmitting MEID?
Seems like no interest here or everybody stumped. I am willing to pay some one to help me resolve this. contact to my email or post here, I will certainly let the forum know when I resolve this. Thanks
GDEMI said:
Seems like no interest here or everybody stumped. I am willing to pay some one to help me resolve this. contact to my email or post here, I will certainly let the forum know when I resolve this. Thanks
Click to expand...
Click to collapse
No need to pay, I forgot about this thread lol. I think you may be right that this is a hardware problem or glitch and I am actually stumped on how to help you. :|
some help here
hi...
im trying to flash my phone and make it to worj for cricket carrier and i do everything ....i think correct but when i try to make a call it ask me if i whant to make a collect phone or buy some kind of card .
i already try the qpst configuration twice and even try many plr to and no luck
righ now i have a 45713hybryd plr
and i use this
http://forum.xda-developers.com/showthread.php?t=934417
i even take to a cricket store to chek for the s/n numbers and the min and they say that everything looks ok but i can do anything on the phone
any ideas, and help
thank
Very dirrerent problem
paulinaoza said:
hi...
im trying to flash my phone and make it to worj for cricket carrier and i do everything ....i think correct but when i try to make a call it ask me if i whant to make a collect phone or buy some kind of card .
i already try the qpst configuration twice and even try many plr to and no luck
righ now i have a 45713hybryd plr
and i use this
http://forum.xda-developers.com/showthread.php?t=934417
i even take to a cricket store to chek for the s/n numbers and the min and they say that everything looks ok but i can do anything on the phone
any ideas, and help
thank
Click to expand...
Click to collapse
Your problem has different symptoms from mine (the threadstarter), it sounds like your prl is incorrect. If you have a correct prl & sid (these can vary for the market you are in , in Phoenix the SID is 4923 and I use the old nationwide non EVDO PRL of 1040) when you dial 611 you will get Cricket, regardless of your ESN/MEID being registered with Cricket, if this doesnt work do not go further. Find a PRL/SID that works (sometimes changing CDMA connect from Auto to Home only can help) . Also make sure MNC/MNC are set to 310/0. Country code/Carrier I think.
Once you get 611 to connect to Cricket, *228 (OTA) will connect to cricket, if It disconnects you before the music starts playing and says 'Sorry....' it is most likely your MEID is not registered correctly with Cricket. In Phoenix *228 always works on EVo's as long as SID/PRL/MEID are correct,
The message you are getting about a credit card required means you are connnecting to some other carriers network (usually Verizon) which is transferring you to someplace to allow you to make a call even though you are
"not authorized" on the network. Go back and check 611 & *228.*228 will load the correct prl for your area and rate plan, check after it runs to see what was loaded. It will also most likely overwrite EVDO settings including MIP, Sip, NAI, etc.
At this point your phone should work, talk & text.
I had the same problem and I look all over. I wanted to unroot and remove jimmy v rom. I was think that if i update to the new update that it will fix it self and i was right. First I had to remove the jimmy v rom, so i got ruu to update the htboot and that let me update to the new 2.3.3. It fix it self and f***ing A.
avillal87 said:
I had the same problem and I look all over. I wanted to unroot and remove jimmy v rom. I was think that if i update to the new update that it will fix it self and i was right. First I had to remove the jimmy v rom, so i got ruu to update the htboot and that let me update to the new 2.3.3. It fix it self and f***ing A.
Click to expand...
Click to collapse
Can you be more specificwhat you loaded and what versions of hboot where involved? I downgraded to 2.1 (with RUU) and hboot .79 and it did not resolve problem.

[Q] Flash Dinc to Metropcs

Posted on General when i should have posted here.
Any way i can do this by myself?
PLEASE?
MoonMaster345 said:
Posted on General when i should have posted here.
Any way i can do this by myself?
PLEASE?
Click to expand...
Click to collapse
Yes you can. You just need to flash a metro prl to your phone, and then contact them. They should be able to do the rest ota. You can get a metro prl here http://www.corolada.com/prl/. If on a stock rom you can flash it with epst, if not you need to use a pc program called QPST.
Man you are the greatest..Seriously!
Im gonna try it right now
Although i need help because QPST cant detect the phone. Im pretty sure that means that the phone needs to be in diagnostic mode
But im trying to get in it but i can't. Does it have to do with being in Tiny's CM10 and not stock?
Well update, i went to gingerbread and changed the prl but i dont think my number got transfered although the metropcs system works
Any help with this?
MoonMaster345 said:
Well update, i went to gingerbread and changed the prl but i dont think my number got transfered although the metropcs system works
Any help with this?
Click to expand...
Click to collapse
Simply changing the prl will not program your phone. The prl meerly allows metro to comunicate with the phone. Im not sure exactly how metros system works. Do you already have an account and number from metro, and is the phones meid registered on metro? If it is you can probably dial *228 and select the option to program if metro uses this option. If you dont have an accout or your phone isnt registered with metro, you will need to call them and do so. You just give them the phones meid they register it, and then program the phone ota (over the air).

[Flash] Galaxy S3 Sprint to Metro Pcs

Hey Guys,
I have a sprint galaxy s3 that i would like to flash over to metro.
Tools i already have:
CDMA Workshop 2.7
DFS 4.3.1
QPST 2.7
QXDM 3.12
i got these in a zip online saying it was the package needed to flash sprint galaxy s3 over to metro pcs. I have no clue where to start with these, i've tried to search the forums and found several tutorials but i'm confused. Some say i have to change my imei to esn and some say i have to an MSL number.
Please help, i'm a first timer at flashing but i've rooted a few galaxy's. I don't want to pay $85 to $100 to just flash my phone.
Any help (Step by step) will be greatly appreciated.
Thanks!:good:
**bump** please someone help me with this
youngdhillon said:
Hey Guys,
I have a sprint galaxy s3 that i would like to flash over to metro.
Tools i already have:
CDMA Workshop 2.7
DFS 4.3.1
QPST 2.7
QXDM 3.12
i got these in a zip online saying it was the package needed to flash sprint galaxy s3 over to metro pcs. I have no clue where to start with these, i've tried to search the forums and found several tutorials but i'm confused. Some say i have to change my imei to esn and some say i have to an MSL number.
Please help, i'm a first timer at flashing but i've rooted a few galaxy's. I don't want to pay $85 to $100 to just flash my phone.
Any help (Step by step) will be greatly appreciated.
Thanks!:good:
Click to expand...
Click to collapse
i have flashed my sprint s3 (SPH-L710) to Virgin Mobile USA which i think will be like yours (CDMA)
all i can say is this
there are quite a few different guides out there (boost, page plus and even cricket)
virgin mobile and metro pcs are a little different but not much.
you are going to have to do research and alot of trial and error.
you will use a mixture of all those tools you listed above to get the results done
i know may way around these apps now and which ones can get certain things done and which ones report wrong info.
i still can not even change my SPC code to a new code like 000000
i see lots of guides on how to do it and i follow them to the letter and they do not work
i then asked for help and no one says anything
the info is out there you just have to read
flashed galaxy s3 sprint to metro
Hello,
I was able to flash my phone using odin 3.4, metropolis and a stock rom. There are alot of tutorials on youtube but my only issue is i have no mobile network. I can not figure out how to get an MDN, MEID for metro. I was able to flash my iphone fully but i can not get a mobile network even when i change the mobile network on the device.
Metro MEID
cookie721 said:
Hello,
I was able to flash my phone using odin 3.4, metropolis and a stock rom. There are alot of tutorials on youtube but my only issue is i have no mobile network. I can not figure out how to get an MDN, MEID for metro. I was able to flash my iphone fully but i can not get a mobile network even when i change the mobile network on the device.
Click to expand...
Click to collapse
You have to have Metro put your MEID in their database.Not many Metro stores will do that for you. But there are a lot on the internet that will. They usually charge $10.00. Just look on craigslist for shops that flash phones to metro.They will be able to have your # put in the database.
I hope that is the answer you needed and that I've understood your question right.
Also, you shouldn't even have to go in to a Metro store to have it activated. Once the correct #'s are in the phone and the MEID is in their database it should program like any other when getting activated.
HELP
en11gma said:
i have flashed my sprint s3 (SPH-L710) to Virgin Mobile USA which i think will be like yours (CDMA)
all i can say is this
there are quite a few different guides out there (boost, page plus and even cricket)
virgin mobile and metro pcs are a little different but not much.
you are going to have to do research and alot of trial and error.
you will use a mixture of all those tools you listed above to get the results done
i know may way around these apps now and which ones can get certain things done and which ones report wrong info.
i still can not even change my SPC code to a new code like 000000
i see lots of guides on how to do it and i follow them to the letter and they do not work
i then asked for help and no one says anything
the info is out there you just have to read
Click to expand...
Click to collapse
^^Hello, i know this post is old but i have been searching all over the wed for days now on how to flash a sprint SPH-L710 to virginmobile, coul you explain to me your steps on how you did it? thank you

Getting Sprint GS3 on VM help...

Hi all, I've never been to this side of the forums, I'm usually in the AT&T s3 threads. So heres whats going on my cousin has VM and a friend of his gave him a Sprint S3 thinking he could activate on VM since they use the sprint network. Well he found out he couldn't do it directly. but after a quick search on google we found that it could be done. Ive been searching here and google and got a lot of info on the procedure but couldn't find a step by step tutorial. Ive already rooted the S3 and flashed a TWRP recovery, Downloaded Conquest rom for it.
I also have downloaded the CDMA tools DFS tools, how to use it i'm clueless. IS there a video or tutorial on this?
After reading this thread several times :
http://forum.xda-developers.com/showthread.php?t=2060085
The donor phone is a LG optimus V
I know that 4g isnt going to happen, unless he had a 4g donor.
Do I need to root the LG phone to get the MSL info via apk like MYMSL Reader?
Is DIAG mode ##DIAG# from the phone dialer?
What is the samsung password and how do I get it?
Any help will be GREATLY appreciated....
I know the only way you used to be able to get the msl on the optimus v was to use CDMA workshop. Its been years since I have had one, so there might be an easier way now.
pbailey212 said:
I know the only way you used to be able to get the msl on the optimus v was to use CDMA workshop. Its been years since I have had one, so there might be an easier way now.
Click to expand...
Click to collapse
Thanks
I did come across another thread that I didnt find originally This Looks like what I need ONCE I get the MSL and/or whatever from the Optimus V. Back to searching and reading
http://forum.xda-developers.com/showthread.php?t=2270191
and this
http://forum.xda-developers.com/showthread.php?t=991668

Categories

Resources