Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks
Hello there,
I have recently installed TomTom 3.01 with GPS update 3.07 and now I cannot connect my BT headset Bluetrek G2 anymore. Before the TomTom install everything worked fine.
I can still pair the headset using the setup wizard, but when it comes to finally connect it I get the error message "Failed to connect".
After hard reset and restore of system before TomTom install all works fine again. Seems to me TomTom somehow blocks the headset-profile.
I spent days reading through all the posts here, but couldn't find any answers.
If there's anyone out there who can help, any tips would be greatly appreciated.
Thanx
[/b]
You could try installing bttools.
Thanx for replying. I have installed bttools from this link http://bluetooth.i-networx.de/index_e.html , but it doesn't seem to do anything. It just appears on the today screen, but none of the buttons has any function. My guess is it only works when the MS-Bluetooth stack is installed (like on the Himalaya), which by default isn't installed on the Blue-Angle. But thanks for trying...
Cheers
Hi,
I need help here. Having problems with YouTube connection. Error Connection failed after i tried to load the icon on the internet favourite. WiFi is on and i have no issues on loading all other websites or applications that require WiFi.
I tried to re-install the Youtube player, but the installation was unsuccessful, indication the program or setting cannot be installed because it does not have sufficient system permission.
i have also search the forum for solution but it does not work.
Appreciate if someone can help me on this.
Called HTC, the only recommendation is hard reset! anyone have other solution to this issue is greatly appreciated.
Thanks
Any help??
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
DjSoundScan said:
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
Click to expand...
Click to collapse
hi have you installed tomtom by any chance if so have a look here http://forum.xda-developers.com/showpost.php?p=4362258&postcount=6
cheers
DjSoundScan said:
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
Click to expand...
Click to collapse
I have the exact same problems. I suspect the BTTrayCE error is from installing a version of tomtom that doesnt work on this phone (which i did do).
Any help regarding the bluetooth would be appreciated as mine behaves the same as described above (it basically only gives the option of connecting to bluetooth headphones...)
You will have to do a hard reset. You'll lose all your installed programs and settings.
If you remove the bluetooth drivers from the TomTom CAB you'll be able to install it without messing up the bluetooth (google to find a program to do this).
DuncanMcCloud said:
I have the exact same problems. I suspect the BTTrayCE error is from installing a version of tomtom that doesnt work on this phone (which i did do).
Any help regarding the bluetooth would be appreciated as mine behaves the same as described above (it basically only gives the option of connecting to bluetooth headphones...)
Click to expand...
Click to collapse
I got it sorted, did as was said on page 7. You must use total commander.
solution to tt7 bluetooth mess up
no need to hard reset. just rename and delete the following files and soft reset your device. woked for me.
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
ive got the same problem, but i cant find the files. its in device\windows right?? where else might the files be?
Rename the files and replace them with the ones mentioned above. It fixed my problem.
DuncanMcCloud said:
Rename the files and replace them with the ones mentioned above. It fixed my problem.
Click to expand...
Click to collapse
I'm using Total Commander. When I try to rename the file, the file name remains as the original. When I try to delete the file, the screen tells me that it cannot delete the file. I have not installed Tom Tom or anything else. Help?
I need a little help. After I installed TomTom Navigator my bluetooth just stopped working. It wouldn't turn on or even recognize that there was bluetooth in the phone! I did a little looking and found a fix that involved renaming 2 DLL files. Now that I did that I can at least get to the menu that lets me activate it, but when I press yes to start bluetooth I get a message "Cannot start Bluetooth stack". Its not super important that I have it fixed now but ASAP would be nice.
Thanks in Advance,
Brian
any help? im still having this issue.
You need to remove these files:
BtCoreIf.dll
BtSdkCE30.dll
ttn6bt2003.dll
Then restart your device ande the original files will be replaced and BT will work again
thanks for the reply but i already deleted them and did a soft reset. should i download the stock DLL's from the internet to replace them? becuase when i went to go delete them again, the delete and rename options were greyed out.