hey everyone, i ran the xdandroid and everthing worked except it says no service and i tried the apn and search for network but nothing happened. Also how can i get my music to work or is that something that doesnt work
i10ve2pwnu said:
hey everyone, i ran the xdandroid and everthing worked except it says no service and i tried the apn and search for network but nothing happened. Also how can i get my music to work or is that something that doesnt work
Click to expand...
Click to collapse
try doing it over wifi I doubt you will get it to work without a data plan.
Get that Startup Right!
Make sure you're startup.txt is correct. Here's mine
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 clock-7x00.a11=500 msmvkeyb_toggle=off gsensor_axis=-1,-2,3 htc_battery_smem.fake=1 physkeyboard=rhod210"
boot
My guess is you're forcing CDMA in the cmdline and you've got a GSM phone.
Delete this "force_cdma=1"
Try that and let me know.
Related
i have been trying every and any build of android i can find for my kaiser but i have yet to find any build or any of the latest files that will allow my touch screen to work. when i go to haret it boots up fine then it take me to the main startup up android screen where it asks you to touch the android and thats as far as i can get because my touch screen isnt responsive in android but work fine in WM i am funning Styles Black rom and yes there is nothing else on the sd card and android files are on the root of the sd ......someone please help
with all these people running android i figured i could get a little help??
First things First!!!
Wich version of Android are you using ?
i have tried the pre made android builds and i have tried make my own by the book no watter what build or what i change i can not get touch screen working. i have even tried changing roms and radios nothing the actually hardware keys work just no touch
Will you kindly post the content of the default.txt file please ?
daedric said:
Will you kindly post the content of the default.txt file please ?
Click to expand...
Click to collapse
#alloctest 0x2000
set RAMSIZE 0x07000000
set RAMADDR 0x10000000
#set FBDURINGBOOT 0
set MTYPE 1553
set KERNEL zImage
#set initrd "initrd.gz"
set initrd "\Storage Card\initrd.gz"
#set initrd "\Storage Card\initrd-console.gz"
#set initrd "\Storage Card\android.bin"
#
# The following kernel parameters are useful
# ppp.username - The username used to connect to the network when dialing #777
# ppp.password - The password used to connect to the network when dialing #777
# msm_sdcc.msmsdcc_fmax - The maximum frequency (in Hz) used by the SD controller
# pm.sleep_mode - The mode used when the phone is off
# 0=Power Collapse Suspend, 1=Power Collapse, 2=Apps Sleep,
# 3=Slow Clock and Wait for Interrupt 4=Wait for Interrupt
# Default is 1, use 1 for best power savings
# board-htckaiser.panel_type - Panel type used to power the panel off and on
# 0=Don't power off the panel (Default)
# 1=Sony 2=Topoly 3=Topoly (probably just the same as 2)
#
set cmdline "clock-7x00.ahb_div=3 clock_7x00.slow=1 elevator=noop ppp.nostart=0 board-htckaiser.panel_type=1 ppp.apn=wap.cingular [email protected] ppp.password=CINGULAR1 pm.sleep_mode=1 mddi.width=320 mddi.height=480 msm_sdcc.msmsdcc_fmax=32000000 no_console_suspend board-kaiser-keypad.atttilt=1"
boot
daedric said:
Will you kindly post the content of the default.txt file please ?
Click to expand...
Click to collapse
this is from the ion premade build running on tpc's new elite rom with a tmobile sim????? any suggestions
what radio version are you running? 1.7x i believe is whats recommended.
Try this one:
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
set cmdline "ppp.username= ppp.password= mddi.width=320 mddi.height=428 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htckaiser.panel_type=1 no_console_suspend lcd.density=128"
boot
jmhalder said:
what radio version are you running? 1.7x i believe is whats recommended.
Click to expand...
Click to collapse
i just upgraded radios to make sure 1.71.xx
no differrence still no touch active
trying txt above now
did you try using the default txt that daedric posted
jamezelle said:
did you try using the default txt that daedric posted
Click to expand...
Click to collapse
yeah i just it and it didnt even boot in to linux at all????
im lost it seems im the only person having these problems
and my radio is 1.71.09.01
jamezelle said:
did you try using the default txt that daedric posted
Click to expand...
Click to collapse
i went through and deleted everything off my SD card and formated it in FAT32 (it was previously FAT) and then tried all the files again to no avail??? any other suggestions
MotoHo said:
i went through and deleted everything off my SD card and formated it in FAT32 (it was previously FAT) and then tried all the files again to no avail??? any other suggestions
Click to expand...
Click to collapse
sorry xda i cant let this die im not a noob and this is really iretating it doesnt make sense i have done everything by the book and still nothing?>
help!! please
the Mtype for kaiser seems to be 1553... your first default.txt is correct
for your screen, you could calibrate it; press camera button and touch upper right and after down left. release camera button... your screen is calibrate
okay i will try and let you know
i tried the screen calibration and nothing....touch screen does not register anything. let me make sure that i am doing this right> after andoid boots up completely and it asks you to touch the android you hold the camera button and touch the top right then touch the bottom right then release the camera button? if so that did NOTHING whatsoever
MotoHo said:
i tried the screen calibration and nothing....touch screen does not register anything. let me make sure that i am doing this right> after andoid boots up completely and it asks you to touch the android you hold the camera button and touch the top right then touch the bottom right then release the camera button? if so that did NOTHING whatsoever
Click to expand...
Click to collapse
It's good... Working for me on KAIS130, your problem doesn't be here.
There is "pointer location" in "dev tools" ... but without touchscreen, how to go into
my "default.txt":
set RAMSIZE 0x07000000
set RAMADDR 0x10000000
set FBDURINGBOOT 0
set MTYPE 1553
set KERNEL zImage
set initrd "initrd.gz"
set cmdline "clock-7x00.ahb_div=3 clock_7x00.slow=1 elevator=noop board-htckaiser.panel_type=2 ppp.apn=orange ppp.username=none ppp.password=none pm.sleep_mode=1 mddi.width=320 mddi.height=480 lcd.density=160 msm_sdcc.msmsdcc_fmax=32000000 no_console_suspend board-kaiser-keypad.atttilt=0"
boot
i tired the default txt you have and nothing still no touch i have been doing some reading and there are other guys using samsung that have been having similiar issues .. why do i have to have the only retarded att tilt on xda?
Anyone having problems with Skyfire beta? It begins to load but freezes up. Wondering if this is happening on all xdandroids or if it's because of my TP2.
I think you can use skyfire, but you have to use some special version. Not sure, I just use the stock Android browser...
very simple - edit your startup.txt
change the part that says
lcd.density=240
to
lcd.density=210
boot android
rerun skyfire beta and go through all the steps
afterward you can change it back
please note, you have to go to advanced settings in the startup util and check manual startup.txt or else it will overwrite your changes
@budbrown
Worked great. Thanks!
Hi!
I have the new android 2.3 running fine on a tilt however the WiFi and bluetooth will not turn on and gives an error. From what I have read I do not see the typical network update.tar for 2.3. Any suggestions on how I should proceed would be greatly appreciated! Iv experimented with different software flashing various ROMs ROM suggestions would also be graciously received.
CHEERS!
Rom Ver 3.57.502.2 WWE
Radio ver 1.70.olinex
Protocol ver 25.65.30.04h
change RADIO or
androidupdate.tgz version.
thank you for the suggestion, I did try different radio ROMS and dloaded the latest update and applied. when in the android interface, setting wireless gives an error when I select it to turn it on. Does anyone have this working on an HTC kaiser? any assistance would be greatly appreciated!
Did you try Kernel version .32? Its never supposed to give Error on turn on with .32
it locks up on boot with latest zimage
last line at boot: device-mapper: uevent: version 1.0.3
generated with atools:
set RAMSIZE 0x07300000
set RAMADDR 0x10000000
set FBDURINGBOOT 0
set MTYPE 1553
set KERNEL zImage
set initrd initrd.lzma
set cmdline "no_console_suspend ppp.nostart=0 hw3d.version=1 mddi.width=240 mddi.height=320 board-kaiser-battery.battery_capacity=2160 board-htckaiser.panel_type=0 board-kaiser-keypad.atttilt=1 sys_partition=/sdcard/andboot/system.img data_partition=/sdcard/andboot/data.img"
boot
Progress! wifi does come on with kernel 2.6.25, I get an IP but cannot browse. I can ping the phone. Once the screen saver comes on I cannot get back in. A white screen when I try to wake it up. Still open to suggestions
wardman said:
Progress! wifi does come on with kernel 2.6.25, I get an IP but cannot browse. I can ping the phone. Once the screen saver comes on I cannot get back in. A white screen when I try to wake it up. Still open to suggestions
Click to expand...
Click to collapse
Change Panel Type in default.txt
THANK YOU! panel type = 2 seems to work great
So any thoughts on the WiFi and not able to surf?
What radio should I use if I want to keep the duel boot option and get wifi to work on kernel 32? if that is my problem...
please help
I updated to radio 1.70.19.09 still freezing on kernel .32 on device-mapper: uevent: version 1.0.3
AND
Still wifi seems to be active but browser does not work. I can ping the phone!
I have same problem, wifi seems to be active but browser and app does not work.
Probably the problem is the dns setting or the routing table.
I suggest both to open terminal (or adb) on the phone and ping the google ip.
If it works the problem is the dns settings.
I tried this..
http://209.191.122.70/
(yahoo.com)
times out on the tilt, loads fine on laptop...
I boot froyo and wifi works!
Where can i find a 2.3 android? and kernel compatible?
I have the solution to the problem of you with wifi:
Step 1: Download Andboot folder (3mb) http://www.4shared.com/zip/p28ZDul3/Andboot.html
Step 2: download Gingerbread (CyanogenMod - ANDROID 2.3)
http://forum.xda-developers.com/showthread.php?t=948134
The wifi will not work after this rom, but there's a solution:
download the update wifi
http://www.4shared.com/file/45NA6EXA/androidupdate.html
and Update.
Now you have the android 2.3 (CyanogenMod) installed and the bluetooth and wifi working!
Take this opportunity to ask for help with the camera because I could not make it work.
I hope it helps.
What's that haret...exe in the andboot folder for. What's the difference to the haret.exe you get after unrar the ziped file?
(Hope this is the right area to post, its more leaning towards ARHD ROM in particular but it may turn out ot be Android specific)
Im not 'new' to roms but the whole cooking/recompiling apks is a little past my comfort zone, but still learning Looong time reader, third time poster.
DesireHD, fully rooted s-off etc etc
ARHD with apaches kernal usually.
Ive just transferred to GiffGaff (GG) from Orange which runs on the O2-UK Network, on first boot of ROM HTCsetup asks to select a carrier and lists for me O2 Prepay, O2 Postpay and Tesco (again runs on O2 Network)
I have to select O2 Prepay then eventually reconfigure the APN by deleting the O2 defaults either manually, with APN B&R or using the giffgaffapn tool a fellow GG user wrote.
My goal is to add a APN to the main list so on first boot I can choose 'GiffGaff' as a carrier and have it auto configure the APN so Data is active during the initial setup.
What Ive found out so far:
Post that I found to push me in right direction.
I know CM has GG in its APN list as the two seperate entries (Data and MMS) which work fine and is needed for the San Francisco to work on GG but a single entry for both works fine.
It seems /system/etc/apns-conf.xml is redundent in 2.2.1 base and APNs are read from system/framework/framework-res.apk /res/xml/apns.xml
Adding the APN to /system/etc/apns-conf.xml AFTER initial boot could possibly work but am trying to get it to work on first boot.
I think this is the correct data to add the the list
Code:
<apn carrier="GiffGaff" apn="giffgaff.com" mcc="234" mnc="10" user="giffgaff" password="password" proxy="193.113.200.195" port="8080" server="http://mmsc.mediamessaging.co.uk:8002" mmsc="http://mmsc.mediamessaging.co.uk:8002" mmsproxy="193.113.200.195" mmsport="8080" type=""/>
I can decomplie, edit the xml, recompile then resign but thats where I stumble.
The output apk is mbs smaller then the original and gives bootloops when recompiled into the ROM.
Im obviously missing something here but cant seem to figure out what.
what files do i need to edit to change APN settings?
i want to change the APN type as it locked for editing?
i have gps issues and want to do this
# Check your APN settings, make sure that your default APN has the following entry in its APN Type: “default,supl” – without the inverted commas. This setting helps speeds up GPS fix everytime, SUPL (Secure User Plane) is defined in the GPS config of Android ROMs, particularly the Desire.
Try the APN backup app to delete the locked APNs and then create a new one from scratch.
Why thank you Sir
Locked apn
Hi
Did this work as i have the same problem.
I need to edit or delete the locked apn.... Carrier stock.
Thanks.