How do i get android on pro2 - Touch Pro2, Tilt 2 Android Development

== MOD EDIT ==
Welcome to Xda! Hope you enjoy your stay. In future please try to atleast search and look at forum stickies before creating a post. Thank you.
== END EDIT ==
Hello everyone and hows it going, i want to know how to get android 2.1 on t-mobile htc touch pro2 (GSM) and can i switch back to winmo with all my info being their

Really?
If you had done just a little research, there is a thread that has asked this question.

[CAB] Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA!
Currently the 2nd sticky in this board:
[CAB] Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA!
has everything you need.
Look around in the future, the answer is usually there.

mjaverto said:
Currently the 2nd sticky in this board:
[CAB] Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA!
has everything you need.
Look around in the future, the answer is usually there.
Click to expand...
Click to collapse
The link that Mjaverto has posted is 2.01 Verison, so that is not your answer, although 2.1 has been booted up once but it doesn't do anything because of Touch Calibration issues.

Kenchi* said:
The link that Mjaverto has posted is 2.01 Verison, so that is not your answer, although 2.1 has been booted up once but it doesn't do anything because of Touch Calibration issues.
Click to expand...
Click to collapse
Actually, it works quite nicely on my RHOD300, and it's gradually getting more usable (link).
@OP: Your questions have been answered literally hundreds of times. Please look a little harder, the answers are not hidden

Related

[Q] ROM backup + why win ce 5.2

Hi all.
This will be my first post in this forum, but sadly I think this subject been up here before. I've been searching these forums and the wiki for some time now and it's ALOT of information here... GREAT WORK! by the way.
But I can't really find any guide that describes why I should do a ROM update. I have learned how to flash the ROM, and that ROM's differs in speed, stability and so on.
Questions I haven't find any clear answers to:
- Clear description on how to backup the original ROM with radio (without SD-card)
- Why tf3d config themes won't work on 1.93 ROMs
- Why does many ROMs uses Win CE 5.2 instead of 6.1?
- Howto backup manila (TF3D) incase of upgrade to manilaHD?
Best regards
Bunnny
short answer
bunnny said:
Hi all.
This will be my first post in this forum, but sadly I think this subject been up here before. I've been searching these forums and the wiki for some time now and it's ALOT of information here... GREAT WORK! by the way.
But I can't really find any guide that describes why I should do a ROM update. I have learned how to flash the ROM, and that ROM's differs in speed, stability and so on.
Questions I haven't find any clear answers to:
- Clear description on how to backup the original ROM with radio (without SD-card)
- Why tf3d config themes won't work on 1.93 ROMs
- Why does many ROMs uses Win CE 5.2 instead of 6.1?
- Howto backup manila (TF3D) incase of upgrade to manilaHD?
Best regards
Bunnny
Click to expand...
Click to collapse
i'll share what i know -
1 - as far as i know, there is no way of "backing up" the existing rom, there is a ROM roll up thread here and also a radio sticky - so you see what stock ROM & radio you have and download it and keep it with you (on your computer)
2 - no idea, don't use themes
3-
windows 6.1 http://en.wikipedia.org/wiki/Windows_Mobile
windows CE 5 http://en.wikipedia.org/wiki/Windows_CE_5.0
http://wiki.xda-developers.com/index.php?pagename=WindowsCE
one is the OS other is the platform.
4 - same as (1) above
i change ROMs because of speed & stability... some do it because of APPS, others because of support... it's what makes you comfortable that counts
hope this helps
cloudedhopes said:
i'll share what i know -
1 - as far as i know, there is no way of "backing up" the existing rom, there is a ROM roll up thread here and also a radio sticky - so you see what stock ROM & radio you have and download it and keep it with you (on your computer)
2 - no idea, don't use themes
3-
windows 6.1 http://en.wikipedia.org/wiki/Windows_Mobile
windows CE 5 http://en.wikipedia.org/wiki/Windows_CE_5.0
http://wiki.xda-developers.com/index.php?pagename=WindowsCE
one is the OS other is the platform.
4 - same as (1) above
i change ROMs because of speed & stability... some do it because of APPS, others because of support... it's what makes you comfortable that counts
hope this helps
Click to expand...
Click to collapse
Ahh, I see (#3), thanks for your reply.
Sadly I havent found my original ROM here.
My OP is 3 sweden and this ROM (1.93.774.3) is not available in the wiki, maybe HTCs ROM (1.93.413.3 SWE) is no loss?
EDIT: Never mind found the rom on the forum http://forum.xda-developers.com/showthread.php?p=2572811 (page 7)
Gentlemen!
Both of you are posting instead of searching. All of the above can be easily explained by ..... reading this forum.
So, plz, instead fo making traffic, reserve yourself a free evening with internet connection and mouse....
Regards....
mjaxa said:
Gentlemen!
Both of you are posting instead of searching. All of the above can be easily explained by ..... reading this forum.
So, plz, instead fo making traffic, reserve yourself a free evening with internet connection and mouse....
Regards....
Click to expand...
Click to collapse
Well you are not helping, neither with my questions or the traffic.
As I wrote in my post I've been searching and still am.
Now it's just question 2 left. And Im glad to say that I have sucessfully flashed my ROM, but I couldn't use HardSPL OliNex138 instead I used Jockyw2001's 1.24

Help! How to install Android on my Touch Pro 2?

== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami
http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
where do u dl haret.its mentioned but theres no dl link
cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that
i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...
how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...
Oké i'm sorry... Hope it will be availible soon.
Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.
lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.
gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?
dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.
I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?

Switching to Android.

Hello guys,
I am kevin and i live in europe.
i saw alot about the OS android for the TP2.
i think i have GSM instead of CDMA.
is Android available for GSM?
Thanks!
I see this is your first post at XDA. Please start by reading the XDA rules, it seems you must have missed them:
http://forum.xda-developers.com/announcement.php?f=589
For future reference, please use the XDA search tool and read before creating a whole new thread for something that has been asked previously. You posted in the correct sub-forum, and it would have only taken a minute or two to find your answer. The link to an installable .cab for the TP2 is below.
Sticky: [CAB] GSM&CDMA Project Android Port and Startup Utility [04/23] 2.1 BUILDS AVAILABLE!

Help compiling a ROM please ?

I'm looking for a 2.2 Froyo rom, WITH HTC Sence UI.
pref, 720p recording, newest radio ect..
tried searching through the forum but can't seem to find one i like, most roms have been trimmed down..
couldn't understand the rom kitchen othervise i would compile my own..
any link for this kind of rom or if someone could compile it for me, would be highly aprishiated.
excuse my bad grammar.
Your kidding right?
I'd have a look again if I were you.
Please use search before posting! When you signed up to these forums you agreed to the forum rules, and the number 1 rule is:
1. Search before posting.
Use one of our search functions before posting, whether you have a question or something new to share, it's very likely someone already asked that question or shared that news.
Click to expand...
Click to collapse
Everything you need to know is here, but always search before asking.
Chef Central > Android http://forum.xda-developers.com/forumdisplay.php?f=613
Learn Android ROM development. For serious students only. This forum is monitored and moderated by seasoned developers.
http://forum.xda-developers.com/showthread.php?t=667298
cyanogen said:
Here's my advice for those looking to make their own Android ROMs.. Stop. Write an app or two first, learn how the system works from a developer standpoint. Learn some Java. Read the developer documentation. Learn how to use Git. Then learn how to build AOSP from source. Read the porting guides, and learn how the build system works (the links below have almost everything you could possibly want to know). Now try to put your new found skills to work on enhancing the platform by writing code or making theme overlays. And share! And put that **** on your resume. There is a *ton* of information out there but any kind of "step-by-step rom cooking guide" is going to be a complete fail- it's too broad of a subject.
Android Developer Guides: http://d.android.com
Working with AOSP source: http://source.android.com
Platform Developer Guide: http://pdk.android.com
Android Gitweb: http://android.git.kernel.org
Git Ready (Git tips and tricks): http://www.gitready.com/
Building CyanogenMod: http://wiki.cyanogenmod.com/index.php/Building_from_source
How Dexopt works and what are those odex files: http://android.git.kernel.org/?p=pl...bcd225e47b2cc7abb2a366112d3aeb45936;hb=master
The PDK site is absolutely vital if you are going to work on custom ROMs. Read every single page. Twice. Some of the info isn't up to date, but you'll get a really good idea about what goes into actually configuring Android to work on a real device.
Click to expand...
Click to collapse
Klutsh said:
Your kidding right?
I'd have a look again if I were you.
Click to expand...
Click to collapse
It's quite hilarious now when I read it again. How %&¤/"# some people can be

[Q] FUSE

Hi all.
My bos hase a old unlocked fuse and wanted me to see if i can get android to run on it.
is there any build that has bt working for calls and gps and camera for pictures.
video is not needed.
this is not a request. I have tried to search the thred and came up with nothing.
Thanks
always search before createing thread...
by the way...yes,you can try xdandroid available here.....there is 2 thread here one is of android 2.1 and other is 2.2 ....try installing that on your memory card......
camera not working....wifi gps works...
Here? Whereis the link.
tjsooley said:
Here? Whereis the link.
Click to expand...
Click to collapse
Did you even LOOK at any of the threads in this section of the forum? Separate of searching, I mean there's at least 5 threads that start with [prj] and have download links.
Let's see...
One....Two (older version of XDAndroid builds...) Three (Newest XDA Builds...) Four Five Six and that's just on the FIRST PAGE!
Thank you Very Much!

Categories

Resources