Develop Bugs

Tilt 2 freezing when locking phone...

Has anyone else had the problem with the Tilt 2 freezing when locking the phone? It doesn't happen all the time; but every so often, it freezes on me and I have to reset the phone to get it to work again. I haven't come across a solid answer for why it does this, so in the meantime I've reverted the locking mechanism to the Windows classic version, not the Windows default version that comes set on the phone. I do like the idea of the sliding unlocking mechanism, but I don't want to deal with the freezing. Is there a fix for this problem?

You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.

thex said:
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
Click to expand...
Click to collapse
I've had bad experiences with S2U2. I had installed S2U2 on my 8525, and I ended up having to do a hard reset. One day, after having to power down and restart the phone, it just wouldn't load. It got stuck in start-up mode. I don't plan to use S2U2 again. I'm not sure if the slide mechanism that comes standard with the Tilt 2 is related to S2U2 or not...

I am wondering if it is a conflict between the NEW WM lock slider and S2U2. I have a corporate exchange, so I have to use the PIN access.
I have the PIN set to appear in one hour if not in use. However, when using the WM slide locker, it ALWAYS reveals the PIN pad. If the PIN access did not appear after every WM slide locker, I would use it.
I changed the settings in for the WM lock to use the classic - thus eliminating the WM slide to unlock.
I will leave it OFF the charger tonight and let you know the results tomorrow.

Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.

thex said:
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
Click to expand...
Click to collapse
Thanks for the follow-up. Yeah, I've done the same thing: switched from default to classic. Thanks again.

Screen Unlock Freezes on Tilt 2
I too had this problem right out of the box. I switched to the Windows Classic as prescribed. However, this prompted me to get out the hand held drill and put a small hole right in the side of the back cover. I found myself having to battle the back cover every time I needed to soft reset, plus I noted the stylus needed to be removed to properly seat the back cover upon reinstall. Now I simply pull out my stylus and stick it in my hole. STOP IT!
Buzz
Formerly MDA / Wing / Tilt... and now Tilt 2
Always AT&T

Screen Unlock Freezes on Tilt 2
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?

southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
I have seen a post similar to this pop up multiple times in the past month. This guy was specifically having problems with his mail client.
http://forum.xda-developers.com/showthread.php?t=634213
Personally I have only experienced this issue when the phone was next to my engine getting 400° temps blasted on it. Its hard to say the actual cause of the problem, but it seems in ideal situations (no 2000 e-mails or excessive heat) my phone is free of any freezing or strange behavior.
*edit*
also at the end of that post another user posted a work around that seems to be helping.

southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
After returning my first HTC Tilt 2 phone and I got a second one, I got the same problem again.
I think I found the screen lock bug for the HTC Tilt 2 that I am able to reproduce. The problem is when I enable the Owner Information [Identification information or Notes] to display when the device is turned on and then try to slide the lock icon it will not unlock the phone.
HTC, please look into fixing this bug. Thanks!
Here are the steps to reproduce the problem:
1. Press the Windows logo start key (the second key on the bottom of your phone).
2. Choose Settings.
3. Choose Personal.
4. Choose Owner Information.
5. I populated everything on the Identification tab as well as a note to contact me on the Notes tab.
6. Choose the Options tab.
7. Check mark either the Identification information box or the Notes box.
8. Click OK
9. Now lock your phone by holding down the end call button.
10. Power off your phone.
11. Power on your phone.
12. Try to unlock your phone right away by sliding the lock all the way left or right.
13. You can slide the lock icon all you want but you will never get to unlock your phone.
14. You now need to soft reset your phone by taking the back cover off and using the stylus to press the side reset button. :-(
I hope this makes it into a downloadable bug fix. In the meantime, I have disabled (unchecked) any Owner Info notifications on device power up. I really miss having this on device power up as my old 7 year old Nokia phone was able to do that without a problem.

Disable lock/slide screen? Is there a way?

OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.

Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.

No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.

i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?

You can do exactly what you're asking for with Switch Pro widget

nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?

snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!

If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App

I would pay for an app/widget that handled this...

delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).

deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.

I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.

CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??

This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).

I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1

is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?

Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.

jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.

CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!

anyone come up with a solution for this?

G2 forgets to lock itself..... HELP!

Hey fellas, to lock my phone I use the pattern lock, but since yesterday every time I lock the phone with power button or sleeps itself after 2 minutes, it doesn't show me the 'draw pattern screen', just the regular 'slide to unlock'.
So, I go and set the pattern up again, and lock it, it shows the 'draw pattern screen' and only shows once, after I lock the phone again, it won't appear anymore.
I'm using CM6.1.1, obviously rooted phone.
Any help or suggestions? Moderators feel free to move this post to cyanogen's thread if needed. Don't know if this might be a problem of CM itself.

Did you enable any of the quick unlock settings in Cyanogenmod settings? I bet my breakfast (which I already ate, sorry) that its because you need to review those CM settings. In User Input or something or other.
Uncheck all of those settings (that enable quick unlock)
(besides those pattern locks are easily hacked -- with the right light and the right amount of grease from your finger anyone can see your "path to unlock" - Im just sayin!)

Sorry man, that quick unlock feature is definetly not checked, it's under "settings/cyanogenmod settings/input settings", quick unlock not checked.
U owe me a pancake lol.
I dont remember getting creative with locking and unlocking settings, the weirdest thing I did was to install a few themes to the phone. Imma try putting everything to default, and start from there.

I've experienced some unlock and lock issues with cm6 aswell. It seemed as if there are settings that conflict with eachother. What happened to me was I changed it to rotory unlock with lock set to immediately engage on screen off. After changing that it wouldn't lock but the screen would turn off. I had to set it to 1 second and then reboot then it would lock just fine.
Sent from my HTC Vision using XDA App

What surprises me is that it stopped working for some reason, because I've been using cm6.1.1 for a couple of weeks and worked perfectly..
Sent from my HTC Vision using XDA App

don't remember where the setting is but it sounds like the time-out setting is not proper, the phone does not lock right away if it is sitting on the table and goes to sleep on it's own but you can set it to do that, i had mine set to 30 seconds so that if the screen turned off while i was waiting for something to download or happen i didn't have to unlock with my pin each time. look through the settings (probably security or cm settings) for the proper tweak, i would give better instructions but i'm currently on miui ROM

g_grey said:
don't remember where the setting is but it sounds like the time-out setting is not proper, the phone does not lock right away if it is sitting on the table and goes to sleep on it's own but you can set it to do that, i had mine set to 30 seconds so that if the screen turned off while i was waiting for something to download or happen i didn't have to unlock with my pin each time. look through the settings (probably security or cm settings) for the proper tweak, i would give better instructions but i'm currently on miui ROM
Click to expand...
Click to collapse
Yeah, these settings are found under CM Settings->User Interface (down at the bottom). I don't think these will be the cause though, since the OP said he didn't really mess with any of the settings. Also, I don't think the settings would cause the "Slide to Unlock" screen to appear (the phone would simply turn the screen back on to whatever was last on, no pattern unlock, no lock screen).
Have you installed any new widgets or lockscreen apps recently? Out of curiosity, have you tried any of the other lock types just to see if they do the same thing (like PIN or password).

Turn screen off without locking

Guys
My screen timeout is at 1 min and it asks me for a PIN if unused for 10 mins. This all works fine but I want the ability to manually turn off the screen but don't want to input a PIN if I return to it before 10 mins. Is this possible? The key on the right of the phone turns off the screen but also locks the phone
Thanks

sam008 said:
Guys
My screen timeout is at 1 min and it asks me for a PIN if unused for 10 mins. This all works fine but I want the ability to manually turn off the screen but don't want to input a PIN if I return to it before 10 mins. Is this possible? The key on the right of the phone turns off the screen but also locks the phone
Thanks
Click to expand...
Click to collapse
Can't you just turn your pin off?
Settings > Security > Screen Lock > None
Or just change the duration before it locks.

jhericurls said:
Can't you just turn your pin off?
Settings > Security > Screen Lock > None
Or just change the duration before it locks.
Click to expand...
Click to collapse
He wants a PIN, but only if the phone is locked for over 10min. Hes expressing that this happens if the screen "times out" but not if the screen is intentionally closed.
OP, this is often a feature of custom ROMs (time-outs and lockscreen delays), but the assumption by default is that if you mean to shut the screen off (intentionally use the power btn) then you want it locked, however if you let it time out, you will probably want to turn it on without having to enter a PIN.

How come the best questions don't get answered??

LOL they do get answered but the answers aren't easy ones to follow

I wonder if this actually is a bug. It's mentioned in leaked documents from Verizon as a fix that's coming.
Although I wouldn't bet my life on it.
Sent from my Galaxy Nexus using Tapatalk

Hang on, under Settings, Security, there is an option to "automatically lock # minutes after sleep". That sounds like it may be what we are looking for.
Sent from my Galaxy Nexus using XDA App

Flanimal said:
Hang on, under Settings, Security, there is an option to "automatically lock # minutes after sleep". That sounds like it may be what we are looking for.
Click to expand...
Click to collapse
Alas no - that's what happens if you let the screen sleep by itself. If you don't want to wait the 30seconds (or whatever) and use the power button to put the screen to sleep it locks the phone at the same time.
I'd like this too but I know of no way to do it.

There was an app that put the screen to sleep without locking it - assuming your phone would auto lock after 10 mins. I used to use it on my N1...

How about not forcing you to have a PIN/password when you set up a VPN on your phone.. what happened to choice Google??

gabster21 said:
How about not forcing you to have a PIN/password when you set up a VPN on your phone.. what happened to choice Google??
Click to expand...
Click to collapse
Err .. how about the "P" part in VPN then?

Valynor said:
Err .. how about the "P" part in VPN then?
Click to expand...
Click to collapse
Err.. how about no other phone forces you to do this? I have a strong VPN account I use to bypass my country's censorship, no private data involved no matter what the P stands for.
Give me a popup saying "It is recommended to have a PIN bla bla bla.." but don't force it on me. That's taking a page out of Apple's playbook.

gabster21 said:
Err.. how about no other phone forces you to do this? I have a strong VPN account I use to bypass my country's censorship, no private data involved no matter what the P stands for.
Give me a popup saying "It is recommended to have a PIN bla bla bla.." but don't force it on me. That's taking a page out of Apple's playbook.
Click to expand...
Click to collapse
Well, ok, your opinion.
I think it's a little bit over the top, though. "Forcing" extra security (maybe) is an incovenience, not giving you freedom of choice like Apple does is something entirely different.

I was really surprised when the auto-locking timeout was not in effect if you shut the phone down yourself. Granted, I can understand why it is like this, sometimes you want an 'instant lock'. But reality is that sometimes you don't.
My HTC Desire locked itself if I did not use it for five minutes, no matter if the screen shut itself off or when I myself did. Sometimes I was in a public transport or queue in store and just shut the screen off, pocketed the device to pay or buy a ticket and then took it out again, continuing where I left off without having to enter the PIN again. Sometimes I used my phone, shut the screen off and remembered that I wanted to do something else too and I could still use the device.
But this is not possible with Galaxy Nexus. It locks whenever I shut the screen off myself despite the set delay. The auto-lock delay only works if the phone's screen is not shut down by the user.

In response to the OP, a feature like that is included in customized ROMS (including the one I am using, AOKP). However, I don't think that specific feature will be available for stock ICS for the time being.
Sent from my Galaxy Nexus using XDA App

LG G4 shortcut menu on unlock screen not displaying?

Hey Guys,
Got my H815T variant today. Extremely happy with it thus far!
Just had a question for other owners.
I was trying to setup lock screen shortcuts, however whenever I selected it and configured it, they never showed up on the lock screen. I am using the 'swipe' security method.
Anyone else have any difficulties with this?
Cheers,
Kevin

Whirlpoolian?
There should be shortcuts on there by default. Were there any when you first used the device? If you've picked them from the lock screen settings then they should appear.
Might be a pain but hard reset might be the only thing i can think of that may work.
Sent from my LG-H815 using Forum Runner

the_scotsman said:
Whirlpoolian?
Click to expand...
Click to collapse
Yup whirlpoolian haha. I got it to work somehow, maybe I just needed to have my SIM inserted. Thanks!

the_scotsman said:
Whirlpoolian?
There should be shortcuts on there by default. Were there any when you first used the device? If you've picked them from the lock screen settings then they should appear.
Might be a pain but hard reset might be the only thing i can think of that may work.
Sent from my LG-H815 using Forum Runner
Click to expand...
Click to collapse
Mine didn't show up until I did a full power off/on after changing them around. Was thoroughly confused as to how to use them for a bit lol....

If you have any kind of lock screen security enabled, you won't be able to use lock screen shortcuts. The Shortcuts menu item under the Lock Screen menu won't show up if your lock screen security is set to anything other than 'None' or 'Swipe.'