I'm having trouble pairing my Desire my with Parrot bluetooth car kit. Keeps saying pairing failed on the phone, which is set to discoverable. I've tried 0000 and 1234 as the codes and neither seem to work. (Can't remember using a code for the iphone) I have also cleared all paired devices on the parrot to start from scratch and no luck
any ideas?
Just managed to fix this, and for anyone having issues the reason it wasnt pairing/accepting the 1234 code was that I was holding the letters to input those numbers, switched the keyboard to numbers, input it, and it paired first time..
confirmed: when it pops up to enter the bluetooth code, change the keypad to numbers and type the 1234. It will pair immediately.
not sure where is the bug on HTC or Parrot side... but at least we have a workaround
dolon said:
confirmed: when it pops up to enter the bluetooth code, change the keypad to numbers and type the 1234. It will pair immediately.
not sure where is the bug on HTC or Parrot side... but at least we have a workaround
Click to expand...
Click to collapse
slightly odd isn't it! at least there's a way to do it!
There is no bug, the keypad simply shows the location of the numeric characters on the alpha keys for when you do switch to the numeric/symbol pad. I'm presuming you had it on alpha when entering numbers. My 3100 connected no problem.
Sent from my HTC mDesire using the XDA mobile application powered by Tapatalk
[email protected] said:
There is no bug, the keypad simply shows the location of the numeric characters on the alpha keys for when you do switch to the numeric/symbol pad.
Sent from my HTC mDesire using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Say what ?
When you press and hold an alpha key, say "R", the number 4 is displayed in green, tap it and it enters the number "4" into the input box.
HTC Desire + Parrot 3100 and 3300 + SatNav
Hi
Was wondering if anyone who has the Desire and a parrot carkit has tried any satnav apps with it? I have and the results are a odd! First of all the instructions are not routed through the car stereo which they were with previous winmo devices (this is not a big problem for me tho) however they ARE routed trhough the car stereoWith NDrive and Sygic Mobile Maps ONLY when IN A CALL!!! which really IS a problem since you can not hear a thing the caller says during the voice instructions it is that loud!! Any ideas how I can stop the app using the bluetooth connection for instructions when in a call?
It seems totally the wrong way round.. voice instructions through the phone speaker when not in a call and through the car when in a call
i'm also wondering this.. best to start a new thread i think.
Original message regarding paring HT Desire and Parot CK3100
Hi, i'm also having difficulty paring my devices. I note your comments regarding using the correct keyboard. I'm only presented with a numeric keyboard and i've tried everying to get a different one so i can try what was suggested above for paring.
Any help anyone can provide me with this would be much appreciated.
Thanks in advance.
Simon
selby1 said:
Hi, i'm also having difficulty paring my devices. I note your comments regarding using the correct keyboard. I'm only presented with a numeric keyboard and i've tried everying to get a different one so i can try what was suggested above for paring.
Any help anyone can provide me with this would be much appreciated.
Thanks in advance.
Simon
Click to expand...
Click to collapse
I just found on another forum, that you have to delete other old paired devices from Parot CK3100 in some cases to pair with a new phones.
Try this and let us know.
Related
I've just bought a Jabra BT800 bluetooth headset in Singapore. I connect the headset with my O2 XDA Mini, but the Caller ID function doesnt work properly.
Jabra BT800 work well if an incoming call that is not in my contacts. It shows the phone number.
But in case of the incoming call is in my contacts, eg: First name="Home", Number="123456789", I only see some unknow characters, yes, it's funny, it's not English or any language of mankind, I dont know exactly what is it? It's not ASCII text for sure.
If I rename from "Home" to "Home12345", it'll shows some unknow characters and "12345".
It's only number can be displayed properly, yes, number only.
But my Jabra BT800 works very well with the SonyE T610 of my friend and my XDA Mini works very well with his HBH-660.
What the hell are going on?
There is problem with my XDA Mini only or all XDA Mini? or BT800?
Somebody has experience about this problem? Pls help me! Any solution?
Thanks in advance!
Jabra BT800 V0020
O2 XDA Mini 1.03.00WWE
I'm having the same problem. You can read my today's new post. The thing is that I was so excited to get the BT800 that I forgot to check full compatibility with the Imate. Actually, I found out when I got it, even before turning it on that 2 main features for which I was getting it will not work: Caller ID and Calls list (redial from BT). The problem is with the phone. You can check on Jabra's site that the 2 devices are compatible, but not fully though. I asked todya if there's and upgrade or application for the phone to make it fully functional. You can follow the replies to my post as well. I'm sad too, I paid 190US$ for it.
The touch pro2 can't carry out the voice speed dial function with my bluetooth headset.
tap the call handling button on the headset can not make anything happen. Neither by press and hold the button.
The only function still remain with the sony-ericsson HBH-DS970 is double tap the call handling button on the headset to re-dial the last number.
The voice speed dial function is very useful when your hands is busy, such as driving. What can I do now?
I have two bluetooth headset, one is sony-ericsson HBH-DS970 and the other is SIEMENS HHB-750.
The software I use is cyberon Voice Speed Dial V1.2.
The following is an answer from HTC:
"I do not know how you have got Cyberon installed as it is not instaled on the device by default.
I therefore cannot give you any support as the devices do not have any voice command software installed out of the box.
best regards,
HTC Europe Support"
I can't have anymore words on this.
Correct it doesn't work There are a number of threads about this around here.
I use Microsoft Voice command and have to (long) press the send key on the phone then it kicks in through the Bluetooth car kit. The general theory is this is a side effect of the change in Bluetooth stack made on this phone, I'm sure we'll see a fix, but probably not until we start seeing cooked ROMs.
Gordon
All you can do is to change the settings for the Send button to launch CVSD when you hold it, but for doing this with your headset's button, unfortunately you'll have to wait... for another ROM...
all the best
Reporting in from Canada here... after reading a couple of threads about issues with bluetooth voice dial, I got concerned and tried it this evening with my Jabra BT3030 and Telus TP2. Voice dial using the included MS Voice Command software works properly when I press the voice dial button on the BT3030. So... the problem isn't universal; we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
VelJharig said:
we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
Click to expand...
Click to collapse
Would you please list some detail information,such as type number, of the bluetooth devices which work perfectly on voice dial?
I seached on this forum and many other chinese forum, almost all of them report the voice dial can't be launch for the call handling button on the bluetooth device.
Thanks in advance.
net_walker said:
Would you please list some detail information,such as type number, of the bluetooth devices which work perfectly on voice dial?
I seached on this forum and many other chinese forum, almost all of them report the voice dial can't be launch for the call handling button on the bluetooth device.
Thanks in advance.
Click to expand...
Click to collapse
Hi net_walker,
I'm not sure if I correctly followed your question, but if you're asking for the model number of bluetooth devices that seem to work with the TP2, I gave that in my original post. It is the Jabra brand, model "BT3030" that works correctly for me on my Telus TP2. The basic web page for the model is here:
http://www.jabra.com/Sites/Jabra/na-us/Headsets/Pages/JabraBT3030.aspx?productfamilytab=Details
On that website, they list it as the model BT3030, with what I believe is an extended specific model number of "(100-93030000-60)".
Hope that is helpful,
--VelJharig
mmmh ! Very interesting !
At first time, i've thought for a BDR tweack to solve the problem.
Now it sounds like it is radio Rom dependant...
VelJharig said:
So... the problem isn't universal; we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
Click to expand...
Click to collapse
That's great news! Hopefully this will give the chefs here something to work with.
Gordon
In the forum, i'v seen somebody who had posted the Telus TP2 Sys and OEM's. I'm dowloading it and trying to analyse the OEM concerned with Ms Voice Command. Hope it can help us to solve the prob.
Schmurtz1968 said:
In the forum, i'v seen somebody who had posted the Telus TP2 Sys and OEM's. I'm dowloading it and trying to analyse the OEM concerned with Ms Voice Command. Hope it can help us to solve the prob.
Click to expand...
Click to collapse
I'd be that person. If you need any other details regarding file info from the device, just let me know.
Thanks for your share.
Because at this moment we didn't have an HardSPL from our dear Olinex Team (hope they do there home work (lol)) to make a cooked rom, i'm looking for something like OEM to CAB to test the OEM into my TP2 and maybe solve the problem for all of us who can't use Bth button to make a voice call.
VelJharig said:
Hi net_walker,
I'm not sure if I correctly followed your question, but if you're asking for the model number of bluetooth devices that seem to work with the TP2, I gave that in my original post. It is the Jabra brand, model "BT3030" that works correctly for me on my Telus TP2. The basic web page for the model is here:
http://www.jabra.com/Sites/Jabra/na-us/Headsets/Pages/JabraBT3030.aspx?productfamilytab=Details
On that website, they list it as the model BT3030, with what I believe is an extended specific model number of "(100-93030000-60)".
Hope that is helpful,
--VelJharig
Click to expand...
Click to collapse
Hi, everybody,
Did someone know some other bluetooth headsets work with Touch Pro2 to carry out the Voice dial function,except this one "Jabra BT3030" ?
Yes, I have the Tmobile TP2 and the Bluetooth voice dial function works with the MSVC that came with the phone. There is a 5-7 seconds wait until the microphone activates. So after I hold down the call button on the ear piece for few seconds to activate voice command, I have to wait till I hear a second sound that tells me the phone is now listening. Other than this, it works just fine.
Its an old plantronic bluetooth ear piece, dont remember the model number, but its the one with silver stripes down the length of the device on the sides. Its in my car, I will check later and add that if anybody needs the number.
My Plantronics headset can call voicedial the same way it did on my Kaiser - a long press of the "call" button.
Genesis3 said:
My Plantronics headset can call voicedial the same way it did on my Kaiser - a long press of the "call" button.
Click to expand...
Click to collapse
Hmmm, very strange.
I have a Plantronics Discovery 925 myself and it's supose to be one in the winner team of Plantronics, but still nothing
And I have to say that it works just perfect with Touch Cruise, Diamond and HD.
Not with this one. You're sure you didn't done anything to your phone regarding this?
all the best
Nope - one of the first things I checked when I got the phone, it worked right out of the box before I started hacking on the registry and such.
DesperateScorpion151 said:
Yes, I have the Tmobile TP2 and the Bluetooth voice dial function works with the MSVC that came with the phone. There is a 5-7 seconds wait until the microphone activates.
Click to expand...
Click to collapse
I can confirm that issue on the T-Mobile Touch Pro 2. It is a VERY long time to wait for MSVC to start listening. I wish there was a way to put the standard Bluetooth stack on here so that Voice Command would work better.
I use a variety of Bluetooth headset devices; BlueAnt S1 car kit, BlueAnt Interphone (motorcycle helmet kit), Nextlink G5, Motorola 850 Stereo headphones... and all have the same slowness for activating MSVC.
I have a MOTOROKR™ T505 and if I hold the button down it'll do last number redial but I have to hold the dial key on the phone down to get Cyberon to listen.
Can't use MSVC as it won't understand me. Lot's of humans have this problem too so it's no surprise
Anyone get anywhere with this ?
Is it fixed in 6.5 or are there any ROMs with a fix cooked in ?
I have the same problem with my SE bluetooth
I have a Tilt2 (wm 6.5) stock with a Motorola H17 and voice command works fine. About 2-3 sec after headset button push and MSVC is listening.
Hello,
i’ve bought one elm327 bluetooth adapter from Ebay, my problem seems to be that i should pair it to my HTC Desire using no code at all(blank code), this seems not to be possible since the ‘ok’ button is greyed out if i do no enter any code. I’ve tried enter ‘spacebar’ and ‘spacebar + backspace’ with no result, first one complains about wrong password, second one just gives me an error when it tries to pair.
The device i am using shows up as ‘CHX’, and the manual states i should use code ’5678′ which does not work at all.
I tried to pair to my macbook and pairing seem to work if i choose to not use any code at all, but i can’t test to see if it actually works because i can’t find any sw for os x.
Anyone have a clue what to do?
TIA
[Edit]
*Solved*
Just for the record if anyone come across the same problem with a device that identifies itself as 'CHX' the pairing code for my unit were not what the documentation stated, but instead 6789.
Discovered this after trying all logical codes i could think of.
Thank you!!!
The same 6789 worked for me!
Thanks!
Thanks! My bluetooth dongle got here today and I tried it out and couldn't get it paired for the life of me, but 6789 did the trick. Going to have to write that puppy down.
RoosterX said:
Just for the record if anyone come across the same problem with a device that identifies itself as 'CHX' the pairing code for my unit were not what the documentation stated, but instead 6789.
Discovered this after trying all logical codes i could think of.
Click to expand...
Click to collapse
Thank´s for the tip, i was beginning to think my new unit was defective.
You have just saved my day.
yeah the more we get this info out there the less people will be like us, thinking we got a defective unit from ebay!!
6789 worked a treat for me too...
ufff strugled to find it in my car just few minutes ago...
tnx to xda dev everything solved...
you rock guys...
Bah, I got mine today but 6789 does not work
nor does 0000, 1234 and about a million others I have tried.
got mine from here
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160550008686&ssPageName=STRK:MEWNX:IT
Try 6789 or 7890
Sent from my HTC Desire [Redux 1.2]
And if you're got it paired but still can't "connect" - some cars need to be fired up and not just key turned to accessory mode.
BMW - Year 2000.
Well 6789 worked after about the 300th attempt.
Doing my head in. Eventually gave me some error message about not connecting properly and resorting to default something...any it worked.
I had tried my old HTC Hero but that simply does not even see the device.
I don't think these things are at all well made but it was cheap.
Hi!
I bought Elm327 a few days ago.
When I try to find it with Htc Desire bluetooth, it doesn't apper in the list.
And so I can't pair these two
However, when I used it with my computer it was fine!
Any idea why this happens?
Hi, I have same problem like lina_k I can pair ELM327 with LG P500 (android), with Mio A501 (windows mobile 5.0), but with T5388i - HTC Touch Diamond 2 clone (windows mobile 6.5) I can't see ELM327 device. Bluetooth is ok, because I use bluetooth handsfree. Can anyone help? Thanks.
i'd love to buy one, somehow my car isn't supported.
vw golf mk5 tdi (CAN BUS),
thanks to this thread for letting me know the 6789 passcode for my cheap ebay obdII reader.
bobzero said:
thanks to this thread for letting me know the 6789 passcode for my cheap ebay obdII reader.
Click to expand...
Click to collapse
It's nice to know that it works for you.
6789 worked for me too, just got in from work to find the dongle waiting, now to charge phone up and put some fuel in the car lol
I got the same unit as you from ebay.. The pairing code appears to be 1234, but running on a mac, so far, I have not gotten it to work. It ID's as an ODBII bluetooth device and functions as an additional serial port. I am trying software from h t t p://w w w.yhasi . com called movi, but am about to give up and switch to windows mode to make sure it really functions.
(Since i am a new poster, i cant post the url correctly)
This thread saved me as well. I tried 0000 and 1234 while repeatedly telling my friend how no device ever uses codes other than those. Thanks!
Thank you! Cd that came with the dongle was broken, and 0000 or 1234 which.usually have worked with other devices, didn't work with this one.
Hi there,
I've searched this great forum for this piece of information and haven't found it, so here goes:
I was about to buy a Desire HD and then I read several users reporting absence of voice dialing over a bluetooth headset. I have to be sure about this, because it would be a deal breaker for me. Apart from this the DHD seems to be a device that fits my needs perfectly.
Hope you guys can help me out.
Thanks for your help in advance
best regards
André
it does do voice dialing over bluetooth with android 2.2 and up, hope that's useful for you.
thanks for answering
I heard that Froyo solved the issue, but that there was still a problem with the Desire HD regarding this feature. could you just confirm that it works. do you have the dhd and tested it yourself? Hope you don't mind my asking, but I don't want to buy a USD 500 phone and find out that this very important feature for me doesnt work. So could you kindly tell me if your info is based on your personal experience with it?
Thanks in advance
Hi,
i am also very curious about this question. I was searching the internet and did not find information about how to get this feature to work. It is not so important for me, as for my father (he owns desire 2.2 fw), but i will also appriciate it. It`s mostly needed in car and it`s quite dangerous without it, i think you know what i am talking about. Thank you for your answers.
I tried voice dialing using Google's Android Voice Actions which worked. However, I did not use bluetooth headset.
I understand there is another app that does voice dialing too (became free from USD$10) which name I cannot recall now.
I believe these can do the job you require.
*Edit* The name of the other app is Vlingo. You can try it out.
just tried Google Voice Search with my BT headset (Plantronics 975) and long-pressing the button didn't get me anywhere...
let's see if Vlingo works
if anyone has a solution it would be very appreciated, since having to tap the phone while driving completely misses the point of using a bluetooth headset in the car.
best regards
André
I have a 10 day old desire hd, it does indeed come with a voice dialer (cyberon voice commander) - at least the telus version of the phone does.
I've not had issues with getting the voice dialing to work...
BUT, after much troubleshooting, I have found that whe the cyberon voice commander app is running, the phone's external speaker volume becomes much quieter - the result: it can be difficult to hear your phone ring in an environment that is not extremely quiet.
the fix: force close the voice commander.
I'm currently in search of a replacement voice dialer app to replace it with
Revolution HD 3.0 is based on Froyo 2.2.1 and I am not able to dial via BT.
There is no response to BT button!
Froyo 2.2 should solve this problem. Should.... In my case this is still issue.
ps. My BT is Plantronics 975
Vlingo does not work with BT Headset long-press button, but it's kind of a workaround. Very, VERY big mistake on behalf of HTC in not making handsfree BT headset voice dialing work, at least until now. I've been escalated in the HTC support, but up to now the only thing they told me is that i works with the plantronics 220. I asked them why it doesn't work with Plantronics 975, since it is their top-of-the-line headset and am waiting for an answer.
If this doesn't get fixed soon it'll be a dealbreaker for me.
Hope someone has a clue as to how to solve this.
best regards
André
See this thread
http://forum.xda-developers.com/showthread.php?t=780687
it has the voicedialer.apk which works along side with google voice actions (does not replace it) and allows you to voice dial with a long press of the bluetooth button.
I installed it this morining, works great. It is included in LeeDroid Rom.
Nerds2You said:
See this thread
http://forum.xda-developers.com/showthread.php?t=780687
it has the voicedialer.apk which works along side with google voice actions (does not replace it) and allows you to voice dial with a long press of the bluetooth button.
I installed it this morining, works great. It is included in LeeDroid Rom.
Click to expand...
Click to collapse
Thanks a lot. Will try it later this evening Does my DHD have to be rooted in order to use it?
Vlingo was working rather well will bt heaset long button press until the update to 3.0. now I have to interact with the screen, which defeats Voice Dialing with BT headset for me.
Does anyone have another solution which works well for BT Headset Voice Dialing?
Best regards
André
I'm having problems getting voice dialing to work with the bluetooth headset as well. I've tried both RCMix3D Runnymede 1.4 and Android Revolution 6.1.1. It was very difficult to get the headset connect and it won't reconnect automatically. Further, the voice dialing app was missing from one of the ROMs and when bluetooth voice dialer starts up on the other one, it freezes the phone and you have to pull the battery which you know is a nightmare on this phone. Note that bluetooth will work when the phone is used to do the dialing but I need to be able to initiate this from the headset so it is truly hands-free to satisfy safe driving laws.
Does anyone have bluetooth voice dialing working on their Desire HD where it is invoked from a tap on the bluetooth device? Please post which ROM you are using and any special tricks required to set it up.
Thank you.
As a followup, I installed LeeDroid to try that out. It is still difficult to connect to the headset and reconnect automatically. However, once it is connected, handsfree bluetooth dialing works!
Can anyone tell me what needs to be fixed to make the BT connection work properly?
Was wondering if Coredroid 7.0 supports sharing phone contacts via bluetooth? I have a Motorola Roadster Bluetooth device in my car and hoped my phone contact list could be shared so I could voice dial using it.
I'm having the following issues:
1) Takes a long time to connect..phone shows paired but not connected (after several minutes it may or may not connect)
2) Doesn't allow me to voicedial (Get an FC if I hit the voicedial button on Roadster)
3) Doesn't support accessing phonebook via bluetooth?
Love the Rom....just wish I could use bluetooth device in my car. Anyone else having issues?
I too am seeing the voice dialer FC when activated from BT but it seems to work fine when initiated from the phone. Would be nice to be able to initiate voice dial from my BT headset. Have done some reading on this issue and appears to be occurring with many roms so it might not be a coredroid issue or even an issue coredroid can fix??
longdongsilver said:
I too am seeing the voice dialer FC when activated from BT but it seems to work fine when initiated from the phone. Would be nice to be able to initiate voice dial from my BT headset. Have done some reading on this issue and appears to be occurring with many roms so it might not be a coredroid issue or even an issue coredroid can fix??
Click to expand...
Click to collapse
I ended up downloading Vlingo from the market. Voice dialing now works fine with my bluetooth Motorola roadster.
Sent from my Desire HD using Tapatalk
Are you able to use the bluetooth button, with the screen off, to initiate a dial?
I can't seem to find anything that works well to leave the phone in my bag in the back seat, and make a call.