Develop Bugs

A set of querries..

hello frnd. i have faced a few problems cooking wm6.5 roms recently. which if you find a solution then share with me asap. am not releasing newer version of my roms cause am busy with my exams and not able to get enough time to fix these bugs.
1st of all am using da_g's kitchen for wm6.5:
here are the problems i am having..
1st. i use youtube that does not require touch flo 3d. you only provided me with the oem. i open application. it loads the videos section. but when i click on any video to view it, i get an error " cannot play this video" i have tried to cook flashlite3 as well as the oone in da_g's kitchens but with no help.
2nd where can i get oem or cab for htc gesture 2. tried searching.
3rd Da_g's recording modification with wm dialer is great. but is it possible to add it to htc dialer?? although have sent him this ques but still if other could fine a soln.
4th how to change link to chome photos directry
5th i dont want date and time setting to start on clicking clock at chome. i dont want anything to happen when i click on clock in titanium.
6th the volume managers do install and work fine normally. but during call, i do not get the call volume display to change call volume. instead i get the usual system and ring volume control display and am unable to change call volume. i have tried both standard and topaz volume manager. could be a build issue but not able to fins a soln yet.
am using notification menu with buttons. could this be causing the issue.?
if you are able to find any possible solutions then feel free to let me know.

Few unfixed problems in the kitchen

Ok, I decided to write new thread because most of the rom makers I pm to didn't answer me at all. Some kind of secrets or whatever. I think we should help each other to improve our ROM's but maybe I'm wrong.
I have some issues in my owe ROM which I can't really fix. Maybe someone will know the solution
1. Some ROM makers wrote in their changelogs that now CommMgr is really closing without being on the process list all the time? How?
2. I'm using EZinput keyboard 2.0.33633 full qwerty and two keyboards should be available: full qwerty and phone keyboard. Only the first one is present in the system (the second one now is standard MS keyboard instead of phone keyboard 2.0 EZinput). Why? I changed the EXT package many times to make sure it's ok and all the time the same issue...
3. Is there a working method to change system rings to wav? Every time I do it then they doesn't work. Do I have to change also some registry value?
4. Windows Media Player dosen't play any videos. I changed mHub and mHubVO into some other versions but still no efect. What else could be the reason?
That's all what I'd love to know to make my ROM better
Thanks in advice!

Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]

michal_banszel said:
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
Click to expand...
Click to collapse
Dude, about the comm manager, I don't know which version of comm manager are u using. But I got my comm manager working good n closing when clicked on x button. All I can say is don't use any new version like 2.8 or topaz comm manager. Use the 2.7.1.4 version. It's OG diamond comm manager n works nice. I'm using the same version.

Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.

michal_banszel said:
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
Click to expand...
Click to collapse
Did u try the GEN Y sip menu..??
I heard someone there saying that if we have the touchflo installed, then only we can change between the phone pad n qwerty board. But touchflo brings some more diff probs elsewhere.
Surprising issue this.. Coz it works perfectly fine with ezinput 1.

My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not

michal_banszel said:
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
Click to expand...
Click to collapse
do u have a package of touchflo..?? If not, I'll mail it to you. Try to import it n see if it works. I had in the previous build of this kitchen.

Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?

michal_banszel said:
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
Click to expand...
Click to collapse
i dont know..check gen y thread..u will definitely get moe help there. its surely been talked about in that thread.

I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.

michal_banszel said:
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
Click to expand...
Click to collapse
nope its not only that, u definitly need the touchflo package, but that package conlicts with wm 6.5
the only thing we can do is wait for HTC to bring out its first WM 6.5 rom for diamond2, then we can take the new touchflo or ezinput package from that rom
about the windows media player issue, make sure u have the DShow OEM in your rom

yozgatg said:
nope its not only that, u definitly need the
about the windows media player issue, make sure u have the DShow OEM in your rom
Click to expand...
Click to collapse
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?

michal_banszel said:
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
Click to expand...
Click to collapse
there a slight newer one in my kitchen, here are the oems i use for multimedia:
- DShow_2_00_19143426_0
- mHub_6_57_080529_E0
- mHubVO_1_75_090515_X0
u should also check the following drivers in OEMDrivers:
- qtv.dll
- qtv_mp4_decoder.dll
try replacing those drivers

Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?

michal_banszel said:
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
Click to expand...
Click to collapse
just check the link in my signature, i released the full kitchen of my rom

Thanks man!

Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?

michal_banszel said:
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
Click to expand...
Click to collapse
Hey Michal,
found something that may help with the face down mute issue
pranavsethi said:
Hi,
Does mute on face down work?
Its not working on mine TD and would be glad if someone can get me to know how to get it working.
Even Checked HKLM, and there is no entry in Phone sector for Face down mute.
Kindly advise.
.............................
Pranav
Click to expand...
Click to collapse
cednicek said:
Try copy reg code from windows mobile 6.1, where it worked... I think i could work.
CODE: HKEY_LOCAL_MACHINE\Software\HTC\PHONE and change FaceDownMuteRing to 0 (default is 1)
Anybody has this problem?
Click to expand...
Click to collapse
Hope this helps

Thanks dude but it doesn't work. I was trying with both, 0 and 1 to make sure but still no effect. Friend of mine checked some others 6.5 ROM's and it seems that it doesn't work in any of them.

I found out that automatic time and date set works only if 3G/SHDPA network is available. So this question is out of date.
If anyone find the solution with face down mute ring then please let me know.
Another issue that I was hoping to solve is contact list popping up every time after SR. So in titanium softkeys registry I changed SK1URL into HTCActionScreen. And now... HTCActionScreen popping up every time after SR. Any solution for that?

[NEED HELP!] HD TAKES TOO LONG TO WAKE UP -many missed calls..-

Till now i have found just about everything in xda! Even a similar thread for the same problem but no solution at all!
Thing is, my hd takes too long to wake up for an incoming call..resulting in missed calls all the time..Ring starts in about 3,5 tones..!!! It wakes almost instandly (backlight) but it takes a lot of time to draw the picture etc and THEN starts ringing..
[i am on MIRIS V18 wm6.5, using the default WM dialer with the sliders (not htc's one!) and csdev for autolocking after wake up]
I had similar problems in many roms, even 6.1 .. with the fastest one being 1,5 tone then ring.. Its allready too long for me! I have tried some tweaks, i am not using mp3 for ringtone, using instant ring from hdtweak and no ring delay setting etc..still no luck..
What can be done? I know that many users have the same problem, even with stock roms.. Its same for such a device to be able to do everything sooo sweat but not the phone function!!
So any special tricks?? (font, gdi cache etc settings?) i heard that with sktools and advanced configuration tool etc you can do actually much about that!
Feel free to post your experinces as well, hoping that someone can provide us with a solution or a worthy workaround..!!

I've got the same problem, always have to call people back. Mostly takes about 5 seconds before the answerbutton works, while ringtone is already pissing off the other passengers in the bus
I still think the slow buildip is caused by Wisbar Advance, I used the HD Tweak aswell.

Very Good POST yes you are right many peoples have the same problem i have the same problem!
So i try with HD tweak "Ring without delay" i try with Advanced config and etc Again the same really when someone ring me no matter from the ringtone or anything the phone start ringing after few seconds!
I make few test and what i saw is that if the phone is sleeping when someone call you take longer your phone to wake up and ring
then i try again with no sleepy phone, again ring with delay so i can say if the phone sleep he need few seconds to ring like 5 seconds if the phone not sleep he need 3-4 seconds But at all This is serious problem and maybe is time we to fix this!
I don`t see any point this device to be able to do so much things and we always to Upgrade them but the phone function that we use everyday to make us troubles!
I have this problem with the stock room when the phone was brand new, after i flash the phone with Davideuck V 5 have the same and now im with Davideuck v7 and again is the same ! so no matter what kind of room or radio version you use this problem is real... and really the phone ring with DELAY
Will be perfect if anyone can find desigion of this problem and our phones to start ring immediately without any delay !
Thanks

I have been struggling for months with well-known this 2-sec (far more than this !) delay. The HD tweak didn't work for me either. Furthermore, it has been reported that even if this setting is changed, it is self-reset after a soft reset !
The only solution I found is replacing the HD Caller ID with the WM default one. It is very ugly compared to the modern HTC one, but now my phone takes only 1 sec to respond, that is, wake up, show the Caller ID screen and start ringing.
This replacement can be done from the settings of the HD tweak.
Please let me know if this works for you ! I'm running stock ROM.

Yes if we use the default WM dialer the PHONE is very very fast and ring without ANY delay but its very UGLY so maybe the problem is in the dailer!
Like i say no matter what room you use yes its the same for me with the default WM and the phone just think faster than me
Maybe some programers must to chek this out why this heppand maybe the HD dialer is too heavy?

Yes,thats true! But i am using wm dialer, not htc's one!! Still far from fast..(although i am on wm 6.5 where the default wm dialer with the answering sliders looks awesome, its buggy and slow as hell..[because it needs that the phone is locked in order to run so])
So as i asked around in a major greek forum i have found out that 99% of hd users have the same issue! [that 1% doesn't give a s&@t !]
Here too..What can we do about it..?I am starting to think the 1,5 tone delay as acceptable value..[told you i am on 3+ right now!!] Does anybody know if windows 6.5 that lock with external programm [like csdev] on wake up take normaly so long? Ideas...?

it's always not a good idea to fresh new rom too often

coolmicko said:
it's always not a good idea to fresh new rom too often
Click to expand...
Click to collapse
That has nothing to do with the problem man..!
If we could find a way to minimize the load on wakeup!! (so the hd has nothing to load more than the phone function!)is it possible?

Like i told you with the default WM dialer with WM 6.1 the phone ring without delay and is like every normal phone so this mean that the problem is in the dialer..
I think that the HD dialer is too heavy or buggy and this is the reason why take so long to wake up.. the phone!
Maybe some programers must to chek this out what is the diference betwen the default WM dialer and HD dialer we all know what is the diference.. but i mean the diference not how they look like how they are made and all other litle codec files..
So maybe we can find solution to update the HD dialer to be fast as the default WM one..
No matter you are with WM 6.5 and etc.. because till the problem is not solved no matter what room you will use the dialers will be the same made from the same files..
to resolve this we need to know what exactly is the problem to be able to fix it!
Like i say i think that we can find answers in the DIALER but im not programer..

this is very true and this is a very good post gonna supscribe to instant email about it right now ... i think the problem is not only in the dialer i have a stock rom and i had the problem since the very first day but i got a greater delay after installing spb pocket plus while i am not actually using manilla anymore and even a greater delay after installing wisbar advance 3 ... maybe the solution would be in the processor priorities i dont know

So far, i haven't found any solution .
I already made the same post a few months ago :
http://forum.xda-developers.com/showthread.php?p=3902624#post3902624

there's got to be a way guys!!
Some time ago, both sides recording was a total NO(!) for htc devices!! They say it was HARDWARE ISSUE and nothing could be done!(for over a year+) Then .. ICR and..voila! We even got tmc now! !
Is it possible to have the slugiest of all phones?? no way!

I think is a question of time we to find solution for our problem with the phone ringing delay!

Managed to get it to 1,5 rings in the same situation!( as i described before, no rom change etc..i was on 3,5 + rings remember!!)
I installed advanced config tool and played with the phone and performance settings.. performance almost set to max values..(font cache etc..)
Phone settings no delay, end key delay from 3000ms to 0 etc..(there are some settings there, so be sure to know what you are doing or backup first!)
Think i can get it to 1..!which will be extremely fast from what i experienced so far!!
Note: the improvements are for the second+ call after a softreset! The first one is ALWAYS slugish!!

Hi kostasalfa,
Mind posting your Adv Config settings? Thanks.

After long... long search I found maybe a solution:
HKCU\ControlPanel\Sounds\RingTone0
Script value to av0pr
I'm going to test but it seems the true way ^^ (thx to AX3L)
D'rath

Ok .. not a "true" solution but got INSTANT ring! (before the end of the first tone!!)
As i said i was on wm 6.5 using the kinda buggy default lock etc...After my advan.config setting which was an improvement i did the following! Stopped csdev and so the deafult lock! I did go back to S2U2 !! (warning,important: set delay after wake up to 300 or better 400 ms!!) And then i tried resco contact manager!(again!) But there is a new beta free for all of you in their forum!( http://www.resco.net/forums/ShowPost.aspx?PostID=24957 ) Set it to HANDLE INCOMING CALLS! Soft reset.. and voila!! (install s2u2 in device..resco better in sd!)
As i said..not a true solution but i GOT INSTANT RING!!
DONT FORGET TO USE HD TWEAK TO REVERT TO DEFAUL WM DIALER, NOT HTC;S ONE!!!
Try abd tell me if it worked for you!

i use the new energy rom 6.5 standard hav no problems with ring time or receive any late calls or miss calls u guys must check out the roms before loading them

Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.

tatou said:
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
Click to expand...
Click to collapse
Good news! Resco did it i think..
(i may try the energy rom as wingtytn suggested but i dont think its a roms issue..Ps:wingtytn try to call yourself from another phone to see WHEN it starts ringing..if you got no issues i would lke to know!you use wm stadar dialer?etc!)

[ROM] [WWE] [WM 6.5.1 Build 23409 + TF3D 2.1] [***NEPTUNES***v1.1] [8/OCT/09]

***NEPTUNES v1.1***
8 oktober 09
ENJOY!!!
Hi all,
This is my contribution.. Many thanks and respect goes out first for Ervius and LobsterDave for his kitchen, RR33 for his TF3D theme, and amarullz for his theme, M6Silver for his taskbar and others making this possible.. This ROM is based on the original HTC ROM so the most basic apps are in this ROM. No fluffy Welcomescreens etc.. so you can bring your own fuzz in it. Just a clean ROM for daily use and business-*bleep* peeps.
This ROM is fast!! Smooth!! Stable!! Powerfull!! and... BUGFREE!!! I hope... and based on latest Build 23409. In my opinion better than previous builds
Try it.. and if you like.. report feedback
Apps included:
PSshutXP with Powerkey
Advanced Config 3.3
TF3D 2.1
Windows Live
Windows Live Messenger
Office mobile
Youtube
Clean RAM
JBlend
QuickGPS
Showcase
Opera 9.5
Topaz D3D Driver, and flash codecs
Apps removed
SkyMarket, Getting started, and some other things you dont wanna know..
Extra's
Segoe Condensed Font (The smartphone oldies)
Integrated theme
New startmenu iconset
Memory info
Mem free stor: .. MB
Program free: .. MB
PAGEPOOL: 16MB
With TF3D
Mem free stor: ..
Program free: .. MB
NOTE!!
Known bug! When you reset your phone, TF3D will often not boot! To solve this, disable TF3D in settings > reboot.. > then enable TF3D again >
Install the dailer off your choice, I recommend Tachi dailer...
Install the taskbar off your choice, i like the M6 taskbar..
And if you cannot find your favorite program in this ROM, get yourself busy!!
I HOPE U ENJOY ​
Download v1.1:http://www.filefactory.com/file/a0fh63f/n/ruu_signed_nbh ​
For customRUU:http://www.filefactory.com/file/a0eh484/n/CustomRUU_exe To flash the ROM, put .nbh file in the same folder as CustomRUU and run CustomRUU​
For changelog, see post 2...
Here a some screenshots

V1.0 not downloadable anymore due.. you know..
Changelog v1.1
- Switched to Build 23409 instead of common Build 23420
- Much faster!
- Integrated themes
- New Drivers
- Better RAM consumption
- Tachi dailer fix
To-do list v1.2

Save it to common ree file hoster (megaupload, rapidshare, ...)

Sounds promising and hope you upload (as Iparee said) so we can try it soon!
Thank you mate.

lparee said:
Save it to common ree file hoster (megaupload, rapidshare, ...)
Click to expand...
Click to collapse
Thanks for your tips guys.. Is there any free hoster around the net??

neptunes50 said:
Thanks for your tips guys.. Is there any free hoster around the net??
Click to expand...
Click to collapse
try this
or this

Thanks you very much1Try it now!

can u plz upload ur rom on megaupload.com...

downloaded and will test over the next few days - prob without tf3d, as i like jmltoday plugin very much. - Not sure though.
laterz.

a few questions if i may:
1. Is there a way to get the realy nice lock screen with the slider like in Bogy nad BSB? I realy liked that and I thought it was the standard, I miss it, I do not want to use S2U2 again.
2. How can I get reed of the connection setup screen, it does not find jmy location so it does not know to setup my connection (israel) and its realy annoying
3. also sashimi cannot realy complete its work in one go, do u know of a problem with it and u'r code?

Thank you so much for this wonderful ROM
I don't like the standard WM6.5 menu, how can I enable the Manila Menu ?

tarakini said:
downloaded and will test over the next few days - prob without tf3d, as i like jmltoday plugin very much. - Not sure though.
laterz.
Click to expand...
Click to collapse
Alright! Just let me know if you find sum bugs.. I can an build without TF3d also if requested.

alon24 said:
a few questions if i may:
1. Is there a way to get the realy nice lock screen with the slider like in Bogy nad BSB? I realy liked that and I thought it was the standard, I miss it, I do not want to use S2U2 again.
2. How can I get reed of the connection setup screen, it does not find jmy location so it does not know to setup my connection (israel) and its realy annoying
3. also sashimi cannot realy complete its work in one go, do u know of a problem with it and u'r code?
Click to expand...
Click to collapse
1. I think so... Maybe this will help http://www.google.com/cse?cx=000825531964825142534%3Acqr2sjirilw&q=&sa=Search&cof=FORID%3A0&ie=utf-8&oe=utf-8
2. Dont know either.. Maybe you should setup manually
3. Dont know man... I do know sashimi is real good in sushi bars
imrock said:
can u plz upload ur rom on megaupload.com...
Click to expand...
Click to collapse
I know.. We peeps are used to Megaupload.. Maybe in the feature if this ROM is most requested
enao11 said:
Thank you so much for this wonderful ROM
I don't like the standard WM6.5 menu, how can I enable the Manila Menu ?
Click to expand...
Click to collapse
As far as I know.. you cant.. But in XDa you never knwo

looks very nice, but a ram consuption is horrible....
87% is more than enough with Tflo
74% is more than enough with Titanium
no another apps were on
I never started iGO8.3.4 because memory low... switched back to BsB 6.5.1A

Bucci said:
looks very nice, but a ram consuption is horrible....
87% is more than enough with Tflo
74% is more than enough with Titanium
no another apps were on
I never started iGO8.3.4 because memory low... switched back to BsB 6.5.1A
Click to expand...
Click to collapse
Yes, i know... Pagepool is set on 16MB.. just for the speed..
I think I will do the next version with fixed bugs and pagepool on 12..
Its much more better balance between speed and RAM consumption maybe...

These days there will be a LITE version, with and without TF3D.. And a revised version of the common v1.0. If i get reports I try to fix them in the next versions

Thank you, very good rom!! no bug seen!!!
i just added windows market place that is not include in your rom and which has opened today.
One question: how can i translate the keyboard to french t9???
thx in advance

vgkeeper said:
Thank you, very good rom!! no bug seen!!!
i just added windows market place that is not include in your rom and which has opened today.
One question: how can i translate the keyboard to french t9???
thx in advance
Click to expand...
Click to collapse
Thank you too.. Im busy with another version, that i will release later this eve.. Much better RAM consumption (about 60% instead of 80& with TF3D2.1)
So keep steady

Hey nice rom , one problem I found , I cannot dial numbers that is not in my contacts is this a bug or did I mess sumthing up?

[email protected] said:
Hey nice rom , one problem I found , I cannot dial numbers that is not in my contacts is this a bug or did I mess sumthing up?
Click to expand...
Click to collapse
Thanks Richard. It should be calling from your SIM-contacts (even if SIM not imported to phone)..
Maybe your did hide SIM-contacts in Advanced Config???

[ROM WM6.5.5(23529)][WWE][02/2010]DsT 1.2.1 Based on BsB ROM

Hello to all .. I am a novice cook and I decided to post here my first ROM .. The ROM does not currently have a name and then I'll call with my nickname ..
However, it is based on the fantastic ROM Makeveral but is still far from perfect ..
Change Log
SOON
After first boot:
Total free storage: 104.30MB - available xxMB
Total free memory: 111.71MB - available 47.72MB
Old Version Here
http://forum.xda-developers.com/showpost.php?p=5713616&postcount=113
------------------------------------------------------------------------------------------
Thanks to the following:
Makeveral - for his fantastic ROM and programs
yozgatg - for the Kitchen
Evirus - for the Visual Kitchen
l3v5y - for the Kitchen
------------------------------------------------------------------------------------------
The ROM you can download it from here:
http://www.mediafire.com/?sharekey=274e30afaa3abeb20dec85adfe0a530acae9f75f773bc311a4648785df63f216
Here you can find a 1.13 and 1.17 radio version
http://www.mediafire.com/?sharekey=274e30afaa3abeb20dec85adfe0a530a47bb0c219a33e12ea4648785df63f216
------------------------------------------------------------------------------------------
Known bugs:
- For unlock screen tap at bottom of screen and slide..
- can not install any program for editing the registry
I hope it is appreciated this ROM ..
bye

Wow!! Great to see a New Chef...!!
Looks good...will give a try....Best of Luck!!!

great!
great, i will try it later. how about memory consumption? how much free ram after boot?

It has 40mb or so free after boot (compared to 47.5 on BsB). The brick game doesn't play. It starts and then bombs out leaving you with the device in landscape view but no easy way back. It locks the device automatically (even while you are using it) and dims the screen. I can't see any options to change this behaviour.
Opera started long enough to auto rotate the screen back, then bombed.
Youtube worked fine, Ramsweeper works. Teeter works. Album works. Media Player works. Calculator works. Internet Explorer bombs. Adobe LE reader works.
I can't see a way to adjust any backlight settings. It dims after about 10 seconds and always goes back to the lock screen.
I'll spend some time installing the advanced config tool and see if there's a way to disable the lock, otherwise it's back to good old BsB.
Thanks for the work in preparing the rom.

Littld Thank you for your bug report .. I put everything in place .. Thanks again ..

littld said:
I'll spend some time installing the advanced config tool and see if there's a way to disable the lock.
Click to expand...
Click to collapse
You can disable autoLock via Registry by changing the following key values
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable
set 0 to Disable
set 1 to enable

hi
you rom would have more success if you mention that it's based on Makeveral's kitchen
I'll give it a try during the weekend
regards and thanx for your work

Upload in progress..
some problem with mediafire... sorry
try upload to 4shared..

is available at 4shared link the new version..

BsB Roms were the best!!!!
I'll keep trying this! but could you please fix the wallpaper cut in homepage (the image is cutted in upper and bottom bar)? These are the only Roms that have this bug...it's so ugly....
Thanx a lot!!!
Good job!!!

so far it's very nice
scrolling is a bit super fast especially in contact which makes it very hard to use !
I'll be testing for bugs now

Alright here are a few things i've noticed today
- memory usage is a little high (on 33 Mo free after a bit... opera displays memory warnings all the time) that's with HTC Menu disabled... maybe something could be done here
- GConfig doesn't work
- Scrolling in dropdown list isn't working properly. it scrolls the page behind or sometimes simply doesn't work with the finger
- scrolling is to fast in some apps (ie : contacts)
- pictures panel "all photos" could launch HTCAlbum instead of MS ****ty pictures & videos
- keyboard button is annoyingly bringing up the SIP selection menu when pressed (worked-around by disabling HTCSipSrv - tap to expand / double tap to fold... nice )
so far it's fast and stable and battery seems to be holding well
NICE !!!

wuub said:
Alright here are a few things i've noticed today
- memory usage is a little high (on 33 Mo free after a bit... opera displays memory warnings all the time) that's with HTC Menu disabled... maybe something could be done here
- GConfig doesn't work
- Scrolling in dropdown list isn't working properly. it scrolls the page behind or sometimes simply doesn't work with the finger
- scrolling is to fast in some apps (ie : contacts)
- pictures panel "all photos" could launch HTCAlbum instead of MS ****ty pictures & videos
- keyboard button is annoyingly bringing up the SIP selection menu when pressed (worked-around by disabling HTCSipSrv - tap to expand / double tap to fold... nice )
so far it's fast and stable and battery seems to be holding well
NICE !!!
Click to expand...
Click to collapse
Thanks a lot for bug report..
-I'm putting the memory attached to the xip to have more.
-g-config replaced with the new version that supports sdk4.0.
-new scroll to have less problems.
-now I have set 3 seconds to hold keybutt for bring up the SIP selection menu ..
I upload it when i go home..

why did you add zip? WinRAR can open zip and rar files? just update it to latest version and remove zip )))

for once i'll have to agree with jesus
rar is fine... no big need for zip ...
cool for the fast bug fixing!
I removed eNative position fix and nothing changed... why did you install it for ? (just curiosity )
battery's has gone down 4% in a 6 hours... which is fine by me...
i'm using a beta build of s2u2 so it might a battery "draining" issue (not sure yet)
I'll check with radio 1.17 if i get bored
little requests :
- in the email panel, do you think it's possible to change the right softkey so it sends and receives, instead of view (which you can access by taping on the panel)?
- the facebook upload from album isn't compatible with album 3.0 ? is there any way to include it without trouble ?
anyways this is truly the following of Mak's great work !
DenStereo I'm glad to say that your rom shall be my new base rom
Gracie Mile !!!

denstereo said:
Thanks a lot for bug report..
-I'm putting the memory attached to the xip to have more.
-g-config replaced with the new version that supports sdk4.0.
-new scroll to have less problems.
-now I have set 3 seconds to hold keybutt for bring up the SIP selection menu ..
I upload it when i go home..
Click to expand...
Click to collapse
as a makeverals roms user im waiting for that

wuub said:
for once i'll have to agree with jesus
rar is fine... no big need for zip ...
cool for the fast bug fixing!
I removed eNative position fix and nothing changed... why did you install it for ? (just curiosity )
battery's has gone down 4% in a 6 hours... which is fine by me...
i'm using a beta build of s2u2 so it might a battery "draining" issue (not sure yet)
I'll check with radio 1.17 if i get bored
little requests :
- in the email panel, do you think it's possible to change the right softkey so it sends and receives, instead of view (which you can access by taping on the panel)?
- the facebook upload from album isn't compatible with album 3.0 ? is there any way to include it without trouble ?
anyways this is truly the following of Mak's great work !
DenStereo I'm glad to say that your rom shall be my new base rom
Gracie Mile !!!
Click to expand...
Click to collapse
I installed native position and fix because if you want to install manila it is automatically placed in the right place ..
For the zip manager prefers over all the poket rar because it integrates seamlessly with file explorer ..
for your requirements see what I can do ..

denstereo said:
I installed native position and fix because if you want to install manila it is automatically placed in the right place ..
For the zip manager prefers over all the poket rar because it integrates seamlessly with file explorer ..
for your requirements see what I can do ..
Click to expand...
Click to collapse
thanx for that... i'll be wainting for your new build
no more bugs detected so far

denstereo said:
I installed native position and fix because if you want to install manila it is automatically placed in the right place ..
For the zip manager prefers over all the poket rar because it integrates seamlessly with file explorer ..
for your requirements see what I can do ..
Click to expand...
Click to collapse
thanx for that... i'll be waiting for your new build
no more bugs detected so far

I'll give it a try, but please bring back NoData in your next update it rocks! Looking good!