A set of querries.. - Touch Diamond, MDA Compact IV ROM Development

hello frnd. i have faced a few problems cooking wm6.5 roms recently. which if you find a solution then share with me asap. am not releasing newer version of my roms cause am busy with my exams and not able to get enough time to fix these bugs.
1st of all am using da_g's kitchen for wm6.5:
here are the problems i am having..
1st. i use youtube that does not require touch flo 3d. you only provided me with the oem. i open application. it loads the videos section. but when i click on any video to view it, i get an error " cannot play this video" i have tried to cook flashlite3 as well as the oone in da_g's kitchens but with no help.
2nd where can i get oem or cab for htc gesture 2. tried searching.
3rd Da_g's recording modification with wm dialer is great. but is it possible to add it to htc dialer?? although have sent him this ques but still if other could fine a soln.
4th how to change link to chome photos directry
5th i dont want date and time setting to start on clicking clock at chome. i dont want anything to happen when i click on clock in titanium.
6th the volume managers do install and work fine normally. but during call, i do not get the call volume display to change call volume. instead i get the usual system and ring volume control display and am unable to change call volume. i have tried both standard and topaz volume manager. could be a build issue but not able to fins a soln yet.
am using notification menu with buttons. could this be causing the issue.?
if you are able to find any possible solutions then feel free to let me know.

Related

Common problem with manila2d and artemis

I tried to figure out what happens with audio manager 2.0 when you turn the device in suspend mode and the music stop playing, but i have no answers, i tried in mostly all new cooked rooms available in this forum so i think that is a problem with manila2d... any one can help me?
maybe changing the registry setting HKLM-Software-HTC-Audiomanager-Config dword: enter_suspend value: 1 ; change to: 0 can solve this?
i tried that and no results! :_(
hm, ok... i could not try before, cause i'm on work now and can not run my musicplayer
Any body figure out how to stop this happening?
I assume all these different manialla roms are based from the same core Rom and maybe the problem is their?
I also noticed, that third party players like Core Player also get terminated when you push the power button, seems a common problem and one that I'd like to fix, as leaving the phone on while playing music seems a tad excesive.
well first.. the new YuE v11.3 3.15.20755 rom with manila is solved this problem..(not the previous V11.1)
and this is the rom
http://forum.xda-developers.com/showthread.php?t=434516
and who don't want to flash a new rom.
i used an application or tweaker called pocket toolman
http://pockettoolman.blogspot.com/
just go to settings and then enable the screen toggle and then assign a hard bottom to it soo al players will work.
hint. this tool opens in the try .. so if you want to use it with manila open it twice from the programs.
cheers
Admin edit: removed spam quote
stop spamming, you...

[NEED HELP!] HD TAKES TOO LONG TO WAKE UP -many missed calls..-

Till now i have found just about everything in xda! Even a similar thread for the same problem but no solution at all!
Thing is, my hd takes too long to wake up for an incoming call..resulting in missed calls all the time..Ring starts in about 3,5 tones..!!! It wakes almost instandly (backlight) but it takes a lot of time to draw the picture etc and THEN starts ringing..
[i am on MIRIS V18 wm6.5, using the default WM dialer with the sliders (not htc's one!) and csdev for autolocking after wake up]
I had similar problems in many roms, even 6.1 .. with the fastest one being 1,5 tone then ring.. Its allready too long for me! I have tried some tweaks, i am not using mp3 for ringtone, using instant ring from hdtweak and no ring delay setting etc..still no luck..
What can be done? I know that many users have the same problem, even with stock roms.. Its same for such a device to be able to do everything sooo sweat but not the phone function!!
So any special tricks?? (font, gdi cache etc settings?) i heard that with sktools and advanced configuration tool etc you can do actually much about that!
Feel free to post your experinces as well, hoping that someone can provide us with a solution or a worthy workaround..!!
I've got the same problem, always have to call people back. Mostly takes about 5 seconds before the answerbutton works, while ringtone is already pissing off the other passengers in the bus
I still think the slow buildip is caused by Wisbar Advance, I used the HD Tweak aswell.
Very Good POST yes you are right many peoples have the same problem i have the same problem!
So i try with HD tweak "Ring without delay" i try with Advanced config and etc Again the same really when someone ring me no matter from the ringtone or anything the phone start ringing after few seconds!
I make few test and what i saw is that if the phone is sleeping when someone call you take longer your phone to wake up and ring
then i try again with no sleepy phone, again ring with delay so i can say if the phone sleep he need few seconds to ring like 5 seconds if the phone not sleep he need 3-4 seconds But at all This is serious problem and maybe is time we to fix this!
I don`t see any point this device to be able to do so much things and we always to Upgrade them but the phone function that we use everyday to make us troubles!
I have this problem with the stock room when the phone was brand new, after i flash the phone with Davideuck V 5 have the same and now im with Davideuck v7 and again is the same ! so no matter what kind of room or radio version you use this problem is real... and really the phone ring with DELAY
Will be perfect if anyone can find desigion of this problem and our phones to start ring immediately without any delay !
Thanks
I have been struggling for months with well-known this 2-sec (far more than this !) delay. The HD tweak didn't work for me either. Furthermore, it has been reported that even if this setting is changed, it is self-reset after a soft reset !
The only solution I found is replacing the HD Caller ID with the WM default one. It is very ugly compared to the modern HTC one, but now my phone takes only 1 sec to respond, that is, wake up, show the Caller ID screen and start ringing.
This replacement can be done from the settings of the HD tweak.
Please let me know if this works for you ! I'm running stock ROM.
Yes if we use the default WM dialer the PHONE is very very fast and ring without ANY delay but its very UGLY so maybe the problem is in the dailer!
Like i say no matter what room you use yes its the same for me with the default WM and the phone just think faster than me
Maybe some programers must to chek this out why this heppand maybe the HD dialer is too heavy?
Yes,thats true! But i am using wm dialer, not htc's one!! Still far from fast..(although i am on wm 6.5 where the default wm dialer with the answering sliders looks awesome, its buggy and slow as hell..[because it needs that the phone is locked in order to run so])
So as i asked around in a major greek forum i have found out that 99% of hd users have the same issue! [that 1% doesn't give a s&@t !]
Here too..What can we do about it..?I am starting to think the 1,5 tone delay as acceptable value..[told you i am on 3+ right now!!] Does anybody know if windows 6.5 that lock with external programm [like csdev] on wake up take normaly so long? Ideas...?
it's always not a good idea to fresh new rom too often
coolmicko said:
it's always not a good idea to fresh new rom too often
Click to expand...
Click to collapse
That has nothing to do with the problem man..!
If we could find a way to minimize the load on wakeup!! (so the hd has nothing to load more than the phone function!)is it possible?
Like i told you with the default WM dialer with WM 6.1 the phone ring without delay and is like every normal phone so this mean that the problem is in the dialer..
I think that the HD dialer is too heavy or buggy and this is the reason why take so long to wake up.. the phone!
Maybe some programers must to chek this out what is the diference betwen the default WM dialer and HD dialer we all know what is the diference.. but i mean the diference not how they look like how they are made and all other litle codec files..
So maybe we can find solution to update the HD dialer to be fast as the default WM one..
No matter you are with WM 6.5 and etc.. because till the problem is not solved no matter what room you will use the dialers will be the same made from the same files..
to resolve this we need to know what exactly is the problem to be able to fix it!
Like i say i think that we can find answers in the DIALER but im not programer..
this is very true and this is a very good post gonna supscribe to instant email about it right now ... i think the problem is not only in the dialer i have a stock rom and i had the problem since the very first day but i got a greater delay after installing spb pocket plus while i am not actually using manilla anymore and even a greater delay after installing wisbar advance 3 ... maybe the solution would be in the processor priorities i dont know
So far, i haven't found any solution .
I already made the same post a few months ago :
http://forum.xda-developers.com/showthread.php?p=3902624#post3902624
there's got to be a way guys!!
Some time ago, both sides recording was a total NO(!) for htc devices!! They say it was HARDWARE ISSUE and nothing could be done!(for over a year+) Then .. ICR and..voila! We even got tmc now! !
Is it possible to have the slugiest of all phones?? no way!
I think is a question of time we to find solution for our problem with the phone ringing delay!
Managed to get it to 1,5 rings in the same situation!( as i described before, no rom change etc..i was on 3,5 + rings remember!!)
I installed advanced config tool and played with the phone and performance settings.. performance almost set to max values..(font cache etc..)
Phone settings no delay, end key delay from 3000ms to 0 etc..(there are some settings there, so be sure to know what you are doing or backup first!)
Think i can get it to 1..!which will be extremely fast from what i experienced so far!!
Note: the improvements are for the second+ call after a softreset! The first one is ALWAYS slugish!!
Hi kostasalfa,
Mind posting your Adv Config settings? Thanks.
After long... long search I found maybe a solution:
HKCU\ControlPanel\Sounds\RingTone0
Script value to av0pr
I'm going to test but it seems the true way ^^ (thx to AX3L)
D'rath
Ok .. not a "true" solution but got INSTANT ring! (before the end of the first tone!!)
As i said i was on wm 6.5 using the kinda buggy default lock etc...After my advan.config setting which was an improvement i did the following! Stopped csdev and so the deafult lock! I did go back to S2U2 !! (warning,important: set delay after wake up to 300 or better 400 ms!!) And then i tried resco contact manager!(again!) But there is a new beta free for all of you in their forum!( http://www.resco.net/forums/ShowPost.aspx?PostID=24957 ) Set it to HANDLE INCOMING CALLS! Soft reset.. and voila!! (install s2u2 in device..resco better in sd!)
As i said..not a true solution but i GOT INSTANT RING!!
DONT FORGET TO USE HD TWEAK TO REVERT TO DEFAUL WM DIALER, NOT HTC;S ONE!!!
Try abd tell me if it worked for you!
i use the new energy rom 6.5 standard hav no problems with ring time or receive any late calls or miss calls u guys must check out the roms before loading them
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
tatou said:
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
Click to expand...
Click to collapse
Good news! Resco did it i think..
(i may try the energy rom as wingtytn suggested but i dont think its a roms issue..Ps:wingtytn try to call yourself from another phone to see WHEN it starts ringing..if you got no issues i would lke to know!you use wm stadar dialer?etc!)

[Update]WM Music Player

Its gotten to the point where i feel that i should completely rewrite this app if any progress is going to be made .
So Im going to try to find some time to do just that.
so if anyones still using this, hopefully ill have something soon... its nowhere near done, but heres what i have so far.
v0.1.0
http://www.youtube.com/watch?v=aygEqcsRcqc
ive attached the (very) alpha version... It looks in your storage card only for your music. and is for wvga devices only.
click on the songs to add them to your now playing playlist, click on the + to add without playing the song.
the player saves the playlist when you click on the clock and minimize the form.
hopefully it works for you
with everything going on i might not be able keep up with this thread very well, but ill try to keep you updated.
-----------------------------------------------------------------
0.0.4:
http://www.youtube.com/watch?v=30_ut9H6kBI
You will also need a rom with WMP installed.... btw
Hi Timmy ,
i really like your windows media payer it's possible to send us your cab?
a big thinks !!!
Timmy212 said:
Im new to this Forum thing and feel pretty lost... BUT
I have been looking for a good music player that i liked, but really havent found anything so i decided i would venture off and make my own. This is my first ever phone app, written in .net 2.0 c#. So i thought i would come here for a little guidance since I've been kind of a ghost in the crowd for this site.
Anyway I have only been working on it for a few weekends and some week nights but i think its coming along nicely. I love to use it at work(which is what spawned the notification area... i would be lost without emails and appointments ) and i have basically tried to build it to what i wanted in a player.
I thought Id bring it here to see if anybody would be interested in helping test it out and like i said... maybe give some guidance.
Since i just started i dont really have a cab or anything, just the .exe from the debugger . but if you guys like it maybe I can make it into something that everyone can enjoy!
heres the video...
http://www.youtube.com/watch?v=PQzPVdEicd0
and pics...
Click to expand...
Click to collapse
Hallo Timmy212, i am intressing on your player. Can you send a link for the player.
And can you tell us for which resolution is done?
I am WQVGA resolution.... i hope it's OK
Timmy212 said:
Im new to this Forum thing and feel pretty lost... BUT
I have been looking for a good music player that i liked, but really havent found anything so i decided i would venture off and make my own. This is my first ever phone app, written in .net 2.0 c#. So i thought i would come here for a little guidance since I've been kind of a ghost in the crowd for this site.
i hope you enjoy ...
and i hope it works .
Click to expand...
Click to collapse
Hello Timmy212,
i can not open the Player. I have WM6.5.3 an the Files load in the Folder we are you write.
The dlls load in the windows folder. When open the player i have a error.
The specified module could not be found. I am press the details and have this error. myTunes.exe filenotfoundexception The specified module could not be found.
by
System.windows.formsAxhost.create witoutlicence(Guid clsid) etc etc...
we can help you for this problem.
cosmicgate said:
Hello Timmy212,
i can not open the Player. I have WM6.5.3 an the Files load in the Folder we are you write.
The dlls load in the windows folder. When open the player i have a error.
The specified module could not be found. I am press the details and have this error. myTunes.exe filenotfoundexception The specified module could not be found.
by
System.windows.formsAxhost.create witoutlicence(Guid clsid) etc etc...
we can help you for this problem.
Click to expand...
Click to collapse
Interesting... I havent seen this error before. Im not sure how to go about troubleshooting that. Hopefully i can work on the player this weekend and see if i cant get a little more stable build up...
Sorry i dont have a definate answer... im trying to learn as fast as i can
Works great for me on my personal 6.5.3 (28008) Fuze build. In fact i love it and so far no bugs. Works fine over bluetooth. The only thing I would love to see added is AVRCP bluetooth remote support.
TaurenSnake said:
Works great for me on my personal 6.5.3 (28008) Fuze build. In fact i love it and so far no bugs. Works fine over bluetooth. The only thing I would love to see added is AVRCP bluetooth remote support.
Click to expand...
Click to collapse
Thats definately on the "todo" list, but i havent had time to look into implementation yet... I'm glad to hear it works for someone though
Hi Timmy
First congrats for your work and your sharing. It's revolutionary in it's design!
After playing a bit I can see room for improvement:
1 enlarge the fonts
2 pressing play 2nd time pauses but the icon doesn't change
3 add volume control
4 add exit button
5 add stop button
6 add a screen off option to save power
In the minimised view:
7 the sliding effect seems reversed because the slider is not moving, consider a wheel effect (with or without slider)
8 shuffling through directories is not very responsive, I found the best response when swiping my fingernail on the top or the bottom of the central slider.
9 the directories names are hidden by the finger, maybe move them above the slider
10 enhance Dpad functionality : right/left are ok, up/down should switch dirs (now they behave like right/left) and action button should play/pause (now it's not responsive)
This is it for now
I wouldn't have bothered writing so much if I didn't think it has the potential to become a leading app, so keep up (I also think you are going to get more involved than you thought )
Big thanks !
Nice App run perfectly on my Axim x51 running WM6
Thanks!!!!!!
Hi Timmy212,
It seems to work OK, but on my VGA Loox N560 running Newplow's ROM for WM6.1 I cannot find out how to exit the program. Am I missing something obvious? There seems to be no menu or exit icon? It does look good though. Thank you.
fingerstoo said:
Hi Timmy212,
It seems to work OK, but on my VGA Loox N560 running Newplow's ROM for WM6.1 I cannot find out how to exit the program. Am I missing something obvious? There seems to be no menu or exit icon? It does look good though. Thank you.
Click to expand...
Click to collapse
When you pull down the top drawer i had it set the windows state to normal so the x button should pop up in the normal windows taskbar... At least thats how i planned it .
tito12 said:
Hi Timmy
First congrats for your work and your sharing. It's revolutionary in it's design!
After playing a bit I can see room for improvement:
1 enlarge the fonts
2 pressing play 2nd time pauses but the icon doesn't change
3 add volume control
4 add exit button
5 add stop button
6 add a screen off option to save power
In the minimised view:
7 the sliding effect seems reversed because the slider is not moving, consider a wheel effect (with or without slider)
8 shuffling through directories is not very responsive, I found the best response when swiping my fingernail on the top or the bottom of the central slider.
9 the directories names are hidden by the finger, maybe move them above the slider
10 enhance Dpad functionality : right/left are ok, up/down should switch dirs (now they behave like right/left) and action button should play/pause (now it's not responsive)
This is it for now
I wouldn't have bothered writing so much if I didn't think it has the potential to become a leading app, so keep up (I also think you are going to get more involved than you thought )
Big thanks !
Click to expand...
Click to collapse
Thanks for your suggestions! ...
all good ideas!
for 1. i Like the idea of seeing as much of the text as i can on the page which is why they are soo small but i have been thinking about increasing the size, especially for lower resolution devices.
2. I do need to implement this,
3. I intially liked the idea of just using the system volume but i might add to see if i like it
4. for my 6.5.1 rom when i minimize it brings up the x button, i didnt think about how 6.5.3 looks
6. again for my rom i just hit the power button and it turns that backlight off, but i will try to add this.
7. Im still trying to figure out exactly how i want this view to work... I really just wanted a Quick way to go through all the album art. Hopefully i can pull something off here
8. The sliding art just works by grabbing the center albumart and then moving it in the direction you want it to go. and if you slide it all the way over and keep your finger on the screen it will keep going until you lift up...
but like i said this MIGHT change
9. i will definately be moving some text around
10. i havent set anything up for the dpad... its just manipulating the listbox that had focus last. This will change
Im about 400 miles away from my main desktop so i havent done any more work on it... but i have been setting up my 6 year old laptop with all the mobile sdk's to hopefully keep the project running the next couple weeks till i can get back home
Thanks for the detailed answer mate, by the way on my build power button stops the music and for the rest, good luck but don't forget to enjoy your holiday
Installed the player in my device with WM 6.5.3 and it works very well.
Besides the points mentioned by Tito i would suggest an exit button as i have to slide down to reveal the taskbar and then close the player from there. On this bulid no exit button comes up.
Also ...is there an option to save playlists?
Timmy212 said:
When you pull down the top drawer i had it set the windows state to normal so the x button should pop up in the normal windows taskbar... At least thats how i planned it .
Click to expand...
Click to collapse
Yup, feel a fool.... I found it after posting, but I notice that Claus1953 did not like it either. Thank you for taking the time to reply.
I like your approach to the GUI design though. Up until now I have been using S2P from this site, by A_C. Because of GUI usability problems with later releases, I have stuck with his older 0.58 release. Your player is similar. I am sure you are familiar with S2P? I will consider using your program as it has some advantages already. Keep it up.
Hello Timmy212,
i found the problem. My operating system WM6.5.3 have not a windows mobile player, separate one mobile corelplayer.
Your more player from there mobile functions more player and not with others playern only with windows mobile.
This is a good player and function perfectly.
Sorry for my english.
claus1953 said:
Installed the player in my device with WM 6.5.3 and it works very well.
Besides the points mentioned by Tito i would suggest an exit button as i have to slide down to reveal the taskbar and then close the player from there. On this bulid no exit button comes up.
Also ...is there an option to save playlists?
Click to expand...
Click to collapse
there is no way to save playlists yet... hopefully i can get it working soon though ... and also a close/minimise button will probably be in the works also.
cosmicgate said:
Hello Timmy212,
i found the problem. My operating system WM6.5.3 have not a windows mobile player, separate one mobile corelplayer.
Your more player from there mobile functions more player and not with others playern only with windows mobile.
This is a good player and function perfectly.
Sorry for my english.
Click to expand...
Click to collapse
excellent... glad you got it working! I should probably figure out some requirements and post them sometime
just one question, sry for bothering you..
what about formats like:
mod, xm, sap, sid,
etc, etc?
any plans for plugins?
just mp3 player with(let's say).. nice look?

doubt about incoming call screen slide

First of all excuse me about thise title, i didn't know which name I would give to this thread.
I have a problem with this incoming call slide. In my stock ROM, it was very smooth when answered or rejected a call. Since I flashed a new ROM, this slide became very slow, even flashing with stock ROM from htc.com.
Could you plesase tell me if you have the same problem?
And I would be very thankfull if someone tell me how can I fix this.
(sorry for my english )
In my experiences, the slide has never been smooth. Would be interested to see if theres a fix.
ASK768 said:
In my experiences, the slide has never been smooth. Would be interested to see if theres a fix.
Click to expand...
Click to collapse
So it's the same in all Blackstone devices? I thought it was only happening to me...
Would be nice if someone could fix this...
Idhor Naergon said:
So it's the same in all Blackstone devices? I thought it was only happening to me...
Would be nice if someone could fix this...
Click to expand...
Click to collapse
I Use my Blackstone from around 2 years and the slider is just Eye Candy i never use it i preffer to press the hardware call button, because often the slider is slow or laggy and this is how it is in many rooms i use around 50 ROM`s and i can tell you Better use the Button the slider is not good at all
Anyway if you want to pick up call with slider you can use S2U2 its free and have Full Screen Caller Image with more sensetive slider and alot other things
tsalta said:
I Use my Blackstone from around 2 years and the slider is just Eye Candy i never use it i preffer to press the hardware call button, because often the slider is slow or laggy and this is how it is in many rooms i use around 50 ROM`s and i can tell you Better use the Button the slider is not good at all
Anyway if you want to pick up call with slider you can use S2U2 its free and have Full Screen Caller Image with more sensetive slider and alot other things
Click to expand...
Click to collapse
Thank you for the information I like this htc slider, but i can't stand its lag... I will try S2U2
Improving the on-screen slider feature
This post is one year old, but maybe the link below will help someone who has the same problem and is trying to solve it.
So I suggest downloading the hotfix from HTC ‘s home page:
Title: Hot fix for improving the on-screen slider feature for answering calls
Link: www[dot]htc[dot]com/europe/SupportDownload.aspx?p_id=179&cat=0&dl_id=474
Click to expand...
Click to collapse
P.S. This is my first post so please forgive me for not posting the link straight away. It is forbidden for security reasons from the forum rules. Respect.
thanks for sharing.
let me just add more information:
the link you provided leads to a direct hotfix (an exe file to be executed on the blackstone directly). it works without entering a serial number (important for everyone with a carrier branded device, that are not able to download roms from htc directly).
and most important: that fix only works for roms 1.22 or older (assuming that the fix is built into newer stock roms).
and for everyone to lazy to copy and paste and mod the url you gave, here is an active link:
http://www.htc.com/europe/SupportDownload.aspx?p_id=179&cat=0&dl_id=474
Chef_Tony said:
thanks for sharing.
let me just add more information:
the link you provided leads to a direct hotfix (an exe file to be executed on the blackstone directly). it works without entering a serial number (important for everyone with a carrier branded device, that are not able to download roms from htc directly).
and most important: that fix only works for roms 1.22 or older (assuming that the fix is built into newer stock roms).
and for everyone to lazy to copy and paste and mod the url you gave, here is an active link:
http://www.htc.com/europe/SupportDownload.aspx?p_id=179&cat=0&dl_id=474
Click to expand...
Click to collapse
Will this affect my device, tho? Last hotfix i applied, crashed my graphics, and gave the distored look, and had to HRS !! not good
but ill try n let you not
Simon_WM said:
Will this affect my device, tho? Last hotfix i applied, crashed my graphics, and gave the distored look, and had to HRS !! not good
but ill try n let you not
Click to expand...
Click to collapse
If you did flash a non-stock ROM and tryed to apply the hotfix, probabily it will happen again.... If your ROM is a a stock one, it might not happen, but you can try.

HTC In Call Recording Will Not Save to SD Card

No matter what ROM I run (usually EnergyROM), I can never get the built-in HTC In call Recording to save to the storage card.
I've set the option in both "In Call Recording" and in "Notes", yet it always saves to /My Documents/Notes. I've even gone so far as to create those directories on the storage card, hoping that would help.
In addition, each and every call is saved in the .wav format. Checking the AMR option does nothing (still saves as WAV).
Before you ask, I've done soft resets, hard resets, calls before installing any apps, etc...
If anyone can help, I'd really appreciate it.
I don't know the answer, but have you tried this program? It does the same but you can save your calls anywhere.
http://forum.xda-developers.com/showthread.php?t=536472
Lennyz1988 said:
I don't know the answer, but have you tried this program? It does the same but you can save your calls anywhere.
http://forum.xda-developers.com/showthread.php?t=536472
Click to expand...
Click to collapse
Thanks for the reply. I actually posted on that thread, subscribed, but didn't see the reply.
I'll check it out today.
My only concern is that people say the other party's voice is often quiet. I'm not sure if that's phone dependent or what...
Sorry to bring up an old thread, but this is still driving me up the wall. I cannot understand how a program with an option to not only save to the SD card, but also to save in AMR (compressed) format... it'll only save to WAV.
Basically, the options don't work. I've tried other programs, but haven't found one yet that doesn't have one side of the conversation barely audible. The HTC voice recorder works great... both sides are clear, the menu option is always there... it just won't save to the SD card. I can get maybe 10 minutes of audio saved before my phone fills up. Sometimes, I have so little memory left, that I have to reboot the phone due to "out of memory" error messages.
There has got to be a way to get ICR to save correctly. Hopefully someone here has tackled this issue.
I don't use ICR myself, but it was reported as a bug to NRG and he fixed it on the newer Energy ROMs.
http://forum.xda-developers.com/showpost.php?p=4579063&postcount=4
July 1st, 2010
Updated to IME (Softkeyboard) version 2014 from latest Leo ROM. This should at least improve typing on the Leo.
Fixed People problem with group sms/email in sense 2.5 roms
Updated ringtone plugin package to 2016
Fixed dialer issues with CDMA TP2 ROMS
Fixed dialer issues with GTX GSM TP2 ROMs
Updated HTC Fontlink package
Updated to RSSHub_2_1_2_1110_03
Updated to Social Networks Engine v1.1.20153620.00
Added more providers to Email Wizard's list
Updated to Voice_Recorder_2_0_20153728_0
Updated to You Tube v2.6.20161226.00
Improved initial setup time
Sense 2016 Release 2 by programatix (for VGA users!)
Newer Swype version for Leo device ROMs only
Updated to Palringo_v2_4_5
Updated to a final version of Office 2010 (no more beta)
In call Recorder now properly saves amr/wav recordings on the storage card (nice little volume overlay too)
Revised volume control graphics
Sensor_SDK_4_2_20113726_00 (for Rhodium)
Kimi Sae Ireba's speech bubbles mod for SMS chat is in and looks great !
Click to expand...
Click to collapse
Wow. Great timing. I use all his ROMs anyways. I'll give it a try. I never would've even bothered to look had you not posted a reply. THANKS!
Nevermind that. I've just tried three different post 1 July ROMs... and all still save to the freaking phone, in uncompressed WAV format. This is so freaking irritating, I just want to throw my phone across the room. I don't know if this is an HTC thing (ICR is still at version 1.0) or an NRG ROM thing (the only ROMs I use). All I know is that I need this to work, or I need an alternative that has both sides of the conversation clearly represented.
Am I the only one who is having this problem??
Flapjack said:
Nevermind that. I've just tried three different post 1 July ROMs... and all still save to the freaking phone, in uncompressed WAV format. This is so freaking irritating, I just want to throw my phone across the room. I don't know if this is an HTC thing (ICR is still at version 1.0) or an NRG ROM thing (the only ROMs I use). All I know is that I need this to work, or I need an alternative that has both sides of the conversation clearly represented.
Am I the only one who is having this problem??
Click to expand...
Click to collapse
No, I am having the issue too... He did not fix it, that was a lie. I just posted this link to a program on EnergyROM thread:
http://forum.xda-developers.com/showthread.php?p=4127675#post4127675
Auto-Call Recorded supposedly with the option to save to "any folder".
I havent tested it yet but will test tonight and report back tomorrow.
ACR works fine for me. And it always saves to the sdcard.
I just installed ACR on my TP2 running the July 10th NRG ROM. The software basically doesn't work. It'll load up, then quit with the following error:
-----------------------------------------------------------------------------
Error:
Code:
An unexpected error has occurred in ACR HD.exe.
Select Quit and then restart this program, or select Details for more information.
Property "Rec" does not exist
-----------------------------------------------------------------------------
Details:
Code:
ACR HD.exe
ArgumentException
Property "Rec" does not exist
at
Microsoft.WindowsMobile.PocketOutlook.PimPropertySet.get_Item(String propertyName)
at
ACR_HD.ModOutlook.Update_Contact_TD()
at
ACR_HD.ModOutlook.Update_Both_TD()
-----------------------------------------------------------------------------

Categories

Resources