Related
I recently install Vista RTM6000 on my laptop. But I found that I can not upgrade my universal rom ever.
Is there somebody successfully upgrade rom in Vista? And how can I do it?
At this point upgrading roms under vista is impossible, because RUU software is incompatible with Vista
The current way I do it is to install Virtual PC 2007 and run XP to do any flashing...it's a cludge but it works.
http://www.microsoft.com/windows/virtualpc/default.mspx
oh,thanks very much,I can't refresh the rom for long time,but couldn't find out the reason.HoHo, that's just because I'm using Vista 6000.
Thanks, but a little sad. Vista does not runs so fast on my laptop. I have already two operation system installed. I really won't to install an another one...
snadboy said:
The current way I do it is to install Virtual PC 2007 and run XP to do any flashing...it's a cludge but it works.
http://www.microsoft.com/windows/virtualpc/default.mspx
Click to expand...
Click to collapse
How it works?, in my virtual XP, it doesn't recognize the prsence of any external devices, not only the jasjar but also the printer, webcam , and so on> Do you have any tricks to do that??
I offer the driver of the modem for Vista 32/64.
For Vista64 by me it is tested, now I write using it.
connect to mda
When I start the USBModem_dialer.exe on my vista desktop, and want to connect using usb modem, which is succesfully installed. I get a remote access error 692. This means a hardware failure.
Many thanks
The modem driver is great I got it installed and have had no problems with it however after installing it on my laptop running Vista Buisness Edition I am no longer able to sync with Windows Mobile Device Center. When I plug it in all it recognizes is the modem. Any ideas as to what is going on? I would appreciate any info. Thanks in advance.
rboersma said:
When I start the USBModem_dialer.exe on my vista desktop, and want to connect using usb modem, which is succesfully installed. I get a remote access error 692. This means a hardware failure.
Click to expand...
Click to collapse
I too followed the installation instructions exactly, but had Error 692. After extensive web-searching, found the solution. Hope it works for you - it did for me. (But no guarantee!)
http://www.ppcsg.com/index.php?showtopic=78789
On trial and errors testing out various config changes I found that the key cause of my XP popping out the Error 692 is when I disabled Modem Compression at any end whether one and not the other or both (meaning the setting at modem properties in the Control Panel and the modem properties in the Dialup networking sections).
The fact is Modem Compression must be enabled on the Control Panel modem properties for the HTC USB modem and the modem properties in the corresponding dialup networking configuration.
Click to expand...
Click to collapse
For active sync to work disable the modem on your mobile
Thanks, this driver works great for me. Windows Ultimate and QTEK 9100
works for me
Vista Business 32 + Imate JASJAM (Hermes in countries outside AUS)
I love you...
Windows Ultimate x64... UTC Apache (Sprint ppc6700)
anyone have a good vista 32 file'?
i try download and get crc error
thanks
Does anyone know where I can get the same driver but then for Bluetooth ?? I keep on getting the Bluetooth periferal device but an not able to install it...
So we need the HTC Bluetooth Modem driver for Vista
Works great on the Wizard (8125) as well.
Thank you!
htc usb modem Driver
big THX
now I thank can use also again my HTC as modem under Vista
File has been corrupted...
I can't d/l the win32 version... I only get the first 10k. Can the file be restored?
great THX!
I also have a problem downloading the driver. Please restore the link with a new download. I think the old one is corrupted. Thanks in advance
Make sure you "Stop" the Modem from phone first before you connect back for sync
Hi,
Have you make sure the phone Modem is in "STOP" mode? If its still in "START" mode then you will not be able to sync it. I'm using Vista Beta version and it's working fine for me.
Hope that's help .
lentic said:
The modem driver is great I got it installed and have had no problems with it however after installing it on my laptop running Vista Buisness Edition I am no longer able to sync with Windows Mobile Device Center. When I plug it in all it recognizes is the modem. Any ideas as to what is going on? I would appreciate any info. Thanks in advance.
Click to expand...
Click to collapse
Thanks....
file worked like a champ on vista laptop with Cingular 8525. modem and sync, both. Sure am glad for smart guys like you.
Here is the file for vista-32
I found this on this website: http://www.htcwiki.com/page/Use+my+MDA+as+a+Modem
unable to download
magician2007 said:
i try download and get crc error
thanks
Click to expand...
Click to collapse
I also recieved errors on 2 differnet PC's while trying to extract the 32-bit Zip file.
(Win2003-winrar, Vista-builtin zip extractor)
Can soneone else confirm this??
please help about vista Modem driver
I have tried to install the driver but does'nt work properly the device (modem) is indicated in the system properties with an exclamation ; i have a Qtek S100, Windows Vista 32bit. please help me
Hi everybody:
I recently started to use a PC with Vista. No activesync but instead WMDC exists. There is no problem in sync.ing with PPC but RUU does not work as expected.
I wonder if there is anyone else who successfully run RUU under vista and flush a new rom to the wizard..
I tried to apply the steps explained in this tread (which is for Hermes) : http://forum.xda-developers.com/showthread.php?t=299462 but I failed. RUU starts, then PPC starts in boot loader mode, after that the RUU hangs with an error...
Any advice, solution etc will be greatly appreciated.
Cheers,
Orhan.
did you try mobilty ceter
i think windows vista uses mobilty ceter not active sync
JIMBABY said:
i think windows vista uses mobilty ceter not active sync
Click to expand...
Click to collapse
he said that...that is WMDC...Windows Mobile Device Center...
Hi,
I will give a try to VMWare (virtual machine) and setup a virtual machine running XP under vista.. Hope it will work ... will report the result to the forum....
Orhan
killacam13 said:
he said that...that is WMDC...Windows Mobile Device Center...
Click to expand...
Click to collapse
I have used VMWare to update the ROM and it works without problems
it worked flawlessly!!
it worked flawlessly !!!!
1) install VMWare (http://www.vmware.com/download/ws/), 2) add a virtual machine in VMWare, 3) install Windows XP to that virtual machine (I used a 2GByte disk space for the xp virtual partitation), 4) Install activesync 4.5 ,
the rest is straight forward as you know
-orhan
orhtr said:
Hi,
I will give a try to VMWare (virtual machine) and setup a virtual machine running XP under vista.. Hope it will work ... will report the result to the forum....
Orhan
Click to expand...
Click to collapse
Yes, VMware works flawlessly on my vista x64... I've flashed ppc several times using XP virual machine and without any problem, but don't forget to disable usb connection on WMDC - else the RUU may cause an error in bootloader mode as it happened to me
Easier way?
So your saying this is the easiest way? There has to be an easier way to flash on vista.
i also use a virtual machine...its called Parallels Workstation...all vista users stick with a vitual machine...it is the easiest way so far...unless u just want the OS then just use ShellTools
Step By Step
Can somebody explain step by step how dos it work.Thank you.
dido said:
Can somebody explain step by step how dos it work.Thank you.
Click to expand...
Click to collapse
I'm not sure exactly what "it" is referring to, but if you are talking about how to install a VMWare workstation and create an image, there are plenty of helps online already to explain that. Just Google it. If you are referring to how to do the ROM update once you get into your virtual machine, it's pretty straight forward. You just plug in your USB cable from your cradle (when the Axim is on it) and the virtual machine will install it just as if you were running Windows XP natively on your machine. Again, there are lots of helps out there if you Google it.
htc prophet
1. installed vmware - xp pro
2. installed active sync 4.5
3. WMDC usb bypass
4. VM menu - REMOVABLE DEVICES - USB DEVICES - High tech computer usb device
5. nothing
just curious, but will this work with microsoft virtual pc instead of vmware? will probably test it myself when i next flash a new rom, but figured it was worth asking here...
monkey_knight said:
just curious, but will this work with microsoft virtual pc instead of vmware? will probably test it myself when i next flash a new rom, but figured it was worth asking here...
Click to expand...
Click to collapse
Yes, it should work just fine. It's the same concept either program you use.
I think that microsoft virtual pc 2007 doesn't support USB connections, so it won't work with it.
Jimm98y said:
I think that microsoft virtual pc 2007 doesn't support USB connections, so it won't work with it.
Click to expand...
Click to collapse
Oh really? Well why the heck would Microsoft do that (remove USB connection support)?
cavyman said:
Oh really? Well why the heck would Microsoft do that (remove USB connection support)?
Click to expand...
Click to collapse
hmmm...that would suck...though it does seem like virtual pc is a bit limited in it's hardware setup for a virtual system. if it doesn't work, i guess i'll have to try vmware...assuming it's free as well.
thx for the tips
monkey_knight said:
hmmm...that would suck...though it does seem like virtual pc is a bit limited in it's hardware setup for a virtual system. if it doesn't work, i guess i'll have to try vmware...assuming it's free as well.
thx for the tips
Click to expand...
Click to collapse
VMWare Player is free, but you would have to obtain a VMWare image somehow to use it. Otherwise, to create a VMWare image, you have to get VMWare Workstation which is gonna cost you.
yup...confirmed that virtual pc doesn't work...doesn't pick up connection (kinda sucks...since it was a free program)...
monkey_knight said:
yup...confirmed that virtual pc doesn't work...doesn't pick up connection (kinda sucks...since it was a free program)...
Click to expand...
Click to collapse
Well, it is a M$ product...free isn't really part of their vocabulary.
Hi guys, I've searched already, and found nothing that answers my question, so that's said. Now, my Windows computer (a laptop) was SMASHED by a cousin of mine. That was the computer I used for flashing (everything else, I'm an Apple-lite, so I use my MacBook Pro and Mac Pro) But now I can't flash. Is there any way to do this with Missing Sync? on Mac OS X?
No there isn't. To bad. I use a Mac too (and the Missing Sync). All the rom flashing and stuff happens on a PC.
But...
Since you've got a Mac with an Intel processor, you can use Apple's Bootcamp or some sort of Windows emulation app.
ah!! A fellow Apple-lite. Hmmm... Can't flash... that IS rather depressing...
Flashing on a Mac Solutions
I also am searching for a solution to this problem. I have a Powermac G4 so, alas, I can't do mine through intel via bootcamp. I would have to spend the money and lower myself to Virtual PC. I'd rather put that towards a new Macbook Pro! You can do it through bootcamp. I did it at my Dad's house on his macbook pro while I was visiting.
In my searching I've discovered that you can flash via your sd card, but you need a program to extract the .cab and make a change to the file. They were sugesting cabextract. Problem is, that it's not available in Leopard right now, and I haven't found another solution yet. I'm still searching though. If anyone can give any more light on this or correct me if I'm wrong that would be great. I really want to come up with a solution for us mac guys!
Smiles
Way to put my smiles up there! Ha!
raymondu999 said:
Hi guys, I've searched already, and found nothing that answers my question, so that's said. Now, my Windows computer (a laptop) was SMASHED by a cousin of mine. That was the computer I used for flashing (everything else, I'm an Apple-lite, so I use my MacBook Pro and Mac Pro) But now I can't flash. Is there any way to do this with Missing Sync? on Mac OS X?
Click to expand...
Click to collapse
Check out VMWare Fusion which lets you run XP in a window. I use that to flash to my MDA Wizard and it works great. The only thing I haven't been able to do - and it may be resolved now in a later release of Fusion - is upload maps for my iGuidance navigation software. For that I have to use the PC.
Hope that helps.
You can use BootCamp to install & run Windows XP natively on your mac.
One of the problems is that I don't have a copy of Windows XP SP2 or above... I have SP1, but not SP2. And I don't have Vista either.
raymondu999 said:
One of the problems is that I don't have a copy of Windows XP SP2 or above... I have SP1, but not SP2. And I don't have Vista either.
Click to expand...
Click to collapse
I don't know how to do it sans Windows. Please let us know if you figure that out.
In other words, I can't use Boot Camp, cos it requires at least XP SP2.
get ur device CID unlocked(CID unlocking requires activeSync)
n then try SD card formatting it doesnt require any computer
After my desktop fried, and i'm always on the go, i purchased a macbook and its my primary computer. I use windows xp running through VMWare's fussion to flash roms, hardspl, cid unlock, tether.. basicly everything for my WM devices. Works perfectly fine for my hermes and kaiser, but wouldn't work on my wizard(that was with parallels) and haven't tried on my magician.
Anyways, i used to use parallels before fusion and it also said it needed an xp sp2 cd, but i went ahead and installed it through the xp sp1 cd and downloaded the sp2 update after xp was installed and everything worked out fine. SO go ahead and give it a try with sp1 and see what happens. Also if you decide on running parallels or fusion, make sure you have enough ram! (i have 2gb ram on my macbook and fusion is set to use 1gb when its running and it runs perfectly!)
I have tried my damnedest to tether the Tilt 2 and a laptop running Windows XP. I have active sync 4.5 and and SP3 XP on the Laptop. I have also loaded the previous listed cab file on the forum for tethering. The laptop recognizes two generic serial items in the device manager, however when I direct it to the USB driver .inf file it will not load the manufacturer to add the generic serial modem.
I have searched through all previous postings, and cannot figure this one out.
Any help would surely be appreciated.
if u have a cooked ROM then you can tether wireless. or unlock the SPL and search for HTC WIFI tether .cab
Works with Vista
I can get the Tilt 2 to tether with a Vista machine. This XP laptop has been the pain.
mrbox23 said:
if u have a cooked ROM then you can tether wireless. or unlock the SPL and search for HTC WIFI tether .cab
Click to expand...
Click to collapse
Can you please be more specific? I'm in the same boat and new to this. Tethering worked right out of the box on my Treo and now I have to pack two phones and switch the SIM card when I need to tether.
Specifically, is there a particular ROM that I need or will all cooked ROMs work? Also, what do you mean by "unlock the SPL"?
Thanks!