Develop Bugs

Install Linux on the BlueAngle questions

I referred to http://handhelds.org/moin/moin.cgi/BlueAngelHowtoInstallLinux to install Linux couple days ago to use well after on mine handset, but the handset is hard reset who couldn't open HARET.EXE to prompt ERR undefine MTYPE the to be able to tell me this is what question and How can solve? How also has is must be able to support Chinese
Thanks

No one know?

Just put " set MTYPE 766 " in your default.txt and Harret should work.

Thank you repey
Stevee said:
Just put " set MTYPE 766 " in your default.txt and Harret should work.
Click to expand...
Click to collapse
I for http://www.linuxtogo.org/~htcpxa/htcblueangel/Qtopia/ the link download the Linux
There not default.txt file but I trying add to startup.txt and used the startup default.txt but don't start the Linux. If I update other ROM and first star the haret.exe can into the Linux but second can't into....
Sorry my En very poor!

No anyone try ?

my english aslo poor

qtopia runs fine
The qtopia runs fine in Blue angle the problems are
1.Camer not working
2.If u plug in the head phone it is not switching
3.and bit slow for my experiance

Advancd Config changes not applying

I just got a Tilt2. It still has the stock ROM. I know on this site that is darn near blasphemy but I haven't taken the time to rebuilt it yet .
My problem is this. I have loaded this version of Advanced Config:
http://forum.xda-developers.com/showpost.php?p=3298924&postcount=454
I open it and make changes. Apply them and the program says to reboot. When it comes back up the changes are still in the program but it doesn't seem to have an effect.
An example being,in Adv Cfg 3.3 I have Suggested Words at 6 for input. Yet then I type I get no suggested words. I tried http://forum.xda-developers.com/showthread.php?t=609202 as well and it didnt have any effects.
Any ideas whey this may be occuring. Thanks!
Edit: I saw this file: http://forum.xda-developers.com/showpost.php?p=3973249&postcount=1 (TP2 unlock for stock ROMS). I have applied it and still there aren't any changes being made.

For word suggest try this...
This is what I did to get word suggest to work on my Tilt2
Set the suggest words at 4 in HDtweak
Did the following Registry changes:
Go to: HKLM\System\CurrentControlSet\Control\layouts\e001 0409
Edit: Ime File = \Windows\compime.dll
Layout Text = COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
It works very well now. I dont think that just changing it in Schapps is enouigh. I think you need to do the registry edits as well.

Help! Does anyboday can use German keyboard of Raph100 in Android System?

How can I use German keyboard of Raph100 in Android System?
The Physical Keyboard layout in Startup.txt can only use for Rhod.
Does anybody can solve this issue?

Oh, My god!-_-！

Get the newest rootfs (I think it's what you need... if not, just get the newest package from here: http://forum.xda-developers.com/showthread.php?t=711692 )
And set in your startup.txt in the "cmd"-line:
physkeyboard=german_raph

Preggy said:
Get the newest rootfs (I think it's what you need... if not, just get the newest package from here: http://forum.xda-developers.com/showthread.php?t=711692 )
And set in your startup.txt in the "cmd"-line:
physkeyboard=german_raph
Click to expand...
Click to collapse
thanks
Thread closed

[APP] XDAndroid Startup Utility - v1.3.1 - 29-OCT-2010

Welcome to the XDAndroid Startup Utility thread. This app can be installed in Windows Mobile 6.0 Pro and up which manipulates startup.txt depending on which checkboxes are selected in the Options screen.
The app also has an update utility which can download the latest kernel, rootfs, and initrd.
Currently it supports generating startup.txt for Rhodium, Raphael, Blackstone, Diamond, and Topaz. This thread is mainly for Rhodium support (since that's the only phone I have), but other device posts are welcome so long as it's only related to this application and not to Android specifically.
Regards,
Sov
*Special thanks for Reefermattness for supplying the slick graphics! HERE is his thread for his CAB project that is used with my startup utility.
If this app has made your life easier, send me some coffee money so I can get less sleep and stamp out more code!!
DOWNLOAD HERE
After you download, give me a shout out what you think about this app. I'm getting 1,000's of downloads, but only a few comments. I just want to know how well this app is working for you... THANKS!
Sov
__________________________________________________
XDAndroidStartup v1.3.1
XDAndroidStartup v1.3.1 Mirror (Mediafire) - for those that have problems downloading from filefront
* Fixed an issue with smaller than previous update files corrupting when overwriting the older one on the device - update.zip is checked for existence and deleted if exists now...
__________________________________________________
XDAndroidStartup v1.3 - Depricated
* Added visual cues while downloading and unzipping updates
* Fixed an issue with update not always being unzipped into the android directory specified
__________________________________________________
XDAndroidStartup v1.2.4b3 - Depricated
This one should finally fix the rel_path issue. The cold medicine is getting to me today...
GOTCHA'S:
no longer put a "\" before your path in Advanced. For instance if your Android directory is \Storage Card\froyo then just type "froyo" (without quotes) in the text box. You'll get the idea when you see the new layout of the Advanced page...
Known bugs:
*Putting your android file system in the root of the sdcard might still not work...go ahead and try it and give me feedback, though!
__________________________________________________
XDAndroidStartup v1.2.4b2 - Depricated
Added rel_path for users having issues when the Android file system is somewhere other than "andboot".
*Non-english users, please let me know if DirectoryNotFound exception is still working with this version...
__________________________________________________
XDAndroidStartup v1.2.4b1 - Depricated
This is beta for non-english phone users to see if the DirectoryNotFound exception is fixed. I only have a Tilt 2 so I can't check it. Let me know how it goes...
__________________________________________________
XDAndroidStartup v1.2.3 - Depricated
Knows bugs:
* DirectoryNotFound exception in non-English phones - under investigation...
* Some people report that it will not boot Android with the Android Directory (Haret.exe location) set to \Storage Card (root) in advanced settings, but very few say this...
__________________________________________________

FAQ:
Q: What do those dern things mean in Advanced Settings?
A: CDMA = Sets force_cdma=1 in startup.txt. This is for CDMA phones. If you pick the correct phone on the main screen, XDAndroid Startup sets this option for you..
HW3D = Sets hw3d.force=1 in startup.txt. This is needed for most phones now (even the Rhodium, YAY!) in order to take advantage of Hardware 3D rendering instead of the slow software rendering.
N. Am. Dial = North American Dialing - This is required for north american prefixes and for Google Voice to work. I haven't used Google Voice personally, but have been told it is necessary.
Post-Android Auto Backlight = xdandroid startup automatically sets winmo registry settings to disable auto backlight dimming so android can control. Upon rebooting winmo a .exe file needs to be placed into the start directory of winmo if auto backlight is to be re-enabled in winmo. Check this box if you want auto-backlight to be re-enabled in winmo upon reboot.
Overclock? = Sets acpuclock.oc_freq_khz=XXXXXX in startup.txt (XXXXXX = the Overclock Level you select just below * 1024)
Overclock Level = If Overclock? (above) is checked, this sets the XXXXXX value (see above) to your selection * 1024.
Manual Startup.txt = check this box if you want to use your own startup.txt instead of xdandroid startup generating it.
Storage Card\<insert your android directory here>\Haret.exe = This is where you tell XDAndroid Startup where haret.exe is and this tells Haret where the android files are.

Anyone for Screenshots???

might need a changelog, huh????

I had to deal with the "directory not found " bug since i've got a german Rhodium.
I just changed the Path from "Storage Card\Andboot" to "Speicherkarte\Andboot" and it worked so it seems that the only problem here is that the Patch "Storage Card" is translated into the equal language of the phone and therefore the default path can't be found
Ps: Please excuse my bad english ^^

@Gronkdalonka
Not all german roms are concerned.
----------
Das hatte ich natürlich als erstes geändert, aber der Fehler ist ein anderer, der nicht bei allen deutschen ROMs auftritt. Es gibt eine lange Fehlermeldung.

What do the options in the Settings of the Startup Utility represent?
I know what HW3D, Overclock, and Force CDMA mean, but what about the rest?
Thank you

atomixpaintball said:
What do the options in the Settings of the Startup Utility represent?
I know what HW3D, Overclock, and Force CDMA mean, but what about the rest?
Thank you
Click to expand...
Click to collapse
Did you check it out...? I think he added the north am dialing setting... What else do you need?

atomixpaintball said:
What do the options in the Settings of the Startup Utility represent?
I know what HW3D, Overclock, and Force CDMA mean, but what about the rest?
Thank you
Click to expand...
Click to collapse
N. Am. Dial = North American Dialing - This is required for north american prefixes and for Google Voice to work. I haven't used Google Voice personally, but have been told it is necessary.
Post-Android Auto Backlight = xdandroid startup automatically sets winmo registry settings to disable auto backlight dimming so android can control. Upon rebooting winmo a .exe file needs to be placed into the start directory of winmo if auto backlight is to be re-enabled in winmo. Check this box if you want auto-backlight to be re-enabled in winmo upon reboot.
Manual Startup.txt = check this box if you want to use your own startup.txt instead of xdandroid startup generating it.

Gronkdalonka said:
I had to deal with the "directory not found " bug since i've got a german Rhodium.
I just changed the Path from "Storage Card\Andboot" to "Speicherkarte\Andboot" and it worked so it seems that the only problem here is that the Patch "Storage Card" is translated into the equal language of the phone and therefore the default path can't be found
Ps: Please excuse my bad english ^^
Click to expand...
Click to collapse
The actual bug that I'm referring to in my first post is about the exception that comes up when loading the app on non-english phones. Some devices are getting a directoryNotFound Exception.
What you are referring to is not a bug, but a feature. That setting is there for people that want to move android around instead of in the default directory. And, yes of course, people with non-english phones will have to edit that option in advanced...

Ah, sorry, my bad

XDAndroid Startup Utility 1.2.4b1 posted in first post. Non-english phone users please try and give some feedback about the DirectoryNotFound Exception.
Thanks!!

Thanks, its working, but reed until the end.
It started after I have renamed HARET.EXE to Haret.exe and edited androidroot.txt (/Speicherkarte/ANDBOOT).
Maybe it was a capital letter problem after the extraction of the android.rar in Windows 7 and copy of the extracted folder to the sd card.
But then I got the next error message in german:
... Please install NETCFv.35.Messages.DE.wm.cab for WM 5.0 or NETCFv.35.Messages.DE.cab ...
System.Net.Sockets.Socket.ReceiveNoCheck(Byte[]buffer, Int32 size, SochetFlags socketFlags)
at
System.Net.Connection.Read/Byte[] buffer, Int32 offset, Int32 count)
...
at
XDAndroidStartup.Form1.UpdateSystem()
I have installed that file from here:
http://www.gps-vor.de/netcf35.htm
but i got the same error.
The phone is going in suspend and came up with that error.
I tried with my fingers on the touchpanel during updating and its working now.
I hope you can understand my poor english.

Tippfehler said:
Thanks, its working, but reed until the end.
It started after I have renamed HARET.EXE to Haret.exe and edited androidroot.txt (/Speicherkarte/ANDBOOT).
Maybe it was a capital letter problem after the extraction of the android.rar in Windows 7 and copy of the extracted folder to the sd card.
But then I got the next error message in german:
... Please install NETCFv.35.Messages.DE.wm.cab for WM 5.0 or NETCFv.35.Messages.DE.cab ...
System.Net.Sockets.Socket.ReceiveNoCheck(Byte[]buffer, Int32 size, SochetFlags socketFlags)
at
System.Net.Connection.Read/Byte[] buffer, Int32 offset, Int32 count)
...
at
XDAndroidStartup.Form1.UpdateSystem()
I have installed that file from here:
http://www.gps-vor.de/netcf35.htm
but i got the same error.
The phone is going in suspend and came up with that error.
I tried with my fingers on the touchpanel during updating and its working now.
I hope you can understand my poor english.
Click to expand...
Click to collapse
1) I think it was the directory problem (see answer 2) and not HARET.exe being capitalized. I have the file as HARET.exe also (capitalized) and it works on my Tilt 2.
2) Did you try changing the directory to /Speicherkarte/ANDBOOT from the Advanced Options page instead of editing androidroot.txt directly? I only ask because I'm wondering if you had a problem setting the directory using the app since you didn't say whether you did or not.
3) Did you get that error message when you pressed Update in the app or it just came up without pressing anything?
Regards,
Sov

I got this error after I pressed the update button, got a black screen und pushed power button.
After changing the folder in the program, the androidroot.txt was not changed and I did it by myself. (maybe not needed)

XDAndroid Startup Utility v1.2.4b2 is available for download!!
Added rel_path to startup.txt for users having issues when the Android file system is somewhere other than "andboot".
*Non-english users, please let me know if DirectoryNotFound exception is still working with this version...

sovereignty said:
XDAndroid Startup Utility v1.2.4b2 is available for download!!
Added rel_path to startup.txt for users having issues when the Android file system is somewhere other than "andboot".
*Non-english users, please let me know if DirectoryNotFound exception is still working with this version...
Click to expand...
Click to collapse
Everyone, please bare with me. There was still a problem trying to run android from somewhere other than "andboot" (I blame it on the cold medicine )
v1.2.4b3 will be out shortly that should fix it...

v1.2.4b3 is ready for download...

b3 works fine for me, thanks!
I had the issue with the DirectoryNotFound exception on a german device.

B3 works fine for me, thanks!
Also I got no problems with a black screen while updating.

build (blazn 2.2.2)

tiad8 just released blazn 2.2.2
very smooth. OMG VERY STABLE
the best build for my blackstone. check it out
http://tiad8.com/showthread.php?t=1

yankees2450 said:
tiad8 just released blazn 2.2.2
very smooth. OMG VERY STABLE
the best build for my blackstone. check it out
http://tiad8.com/showthread.php?t=1
Click to expand...
Click to collapse
yes indeed, looks very good from the clip (youtobe)

And what about nand? Any progress?

paul-ac said:
And what about nand? Any progress?
Click to expand...
Click to collapse
Be patient... it will come sooner or later.

WOW is great,i instaled !
Fast and Stable ,
BLAZN 2.2.2 :
register an play,
Good Luck !
http://tiad8.com/showthread.php?t=27

Hi and thanx for the good job with this build. I have a few question about key mapping. When my phone is locked i can press "home button" to unlock it. It's a problem for me because I always have the phone in my pocket and it can be unlocked easily.
Is there a way to disabled this action?
edit: I would add that I got a deep sleep during the afternoon and the phone was quite hot.
Thanx

when i see first page after android start works i can't do anything becouse my touch screen don't work and after 2 mins trying to "touch the android to begin" my blackstone freez ;/
my startup.txt
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2030
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 msmvkeyb_toggle=off msm_blackstone_pad.vibrate=1 board-blackstone.is_gsm=0 force_cdma=0 acpuclock.oc_freq_khz=620000 gsensor_axis=-2,-1,3 msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
boot
i'm using:
modules-2.6.27.46-01258-gf9e4956.tar.gz
what can be wrong?/

warfae said:
when i see first page after android start works i can't do anything becouse my touch screen don't work and after 2 mins trying to "touch the android to begin" my blackstone freez ;/
my startup.txt
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2030
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 msmvkeyb_toggle=off msm_blackstone_pad.vibrate=1 board-blackstone.is_gsm=0 force_cdma=0 acpuclock.oc_freq_khz=620000 gsensor_axis=-2,-1,3 msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
boot
i'm using:
modules-2.6.27.46-01258-gf9e4956.tar.gz
what can be wrong?/
Click to expand...
Click to collapse
Guy download an kernel 1278... and you need to fix your startup + boot first without sim and disable data after.. turn off phone get sim back and boot into winmo and bootagain android
your startup will look like this :
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2030
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 msmvkeyb_toggle=off msm_blackstone_pad.vibrate=1 force_cdma=0 acpuclock.oc_freq_khz=620000 gsensor_axis=-2,-1,3 msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
boot

Hello guys i have question and problem with this blazn 2.2.2 i try to run it and always it stuck on XDANDROID animation and that its.. i try few times waiting around 15 even 20 minutes the Android do not start.. only stay in the XDANDROID animation, all seems to be loaded good no error at all i dont know what im missing for this reason im uploading the files i use... please tell me what i need to edit or put to run this android version on my Blackstone.
I put all this files inside the ROOT of my SD Card like i do always after i run Haret everything its normal etc and just stuck on the XDANDROID animation so i guess i missed something?!
Thank you in advance
http://www65.zippyshare.com/v/73240968/file.html
Edit: Im waiting the Official Release for Blackstone Tiad8 say.. ETA after 2 hrs will try it with Sure!!!

For Android blazn_2011.04.06 from tiad8
tsalta said:
Hello guys i have question and problem with this blazn 2.2.2 i try to run it and always it stuck on XDANDROID animation and that its.. i try few times waiting around 15 even 20 minutes the Android do not start.. only stay in the XDANDROID animation, all seems to be loaded good no error at all i dont know what im missing for this reason im uploading the files i use... please tell me what i need to edit or put to run this android version on my Blackstone.
I put all this files inside the ROOT of my SD Card like i do always after i run Haret everything its normal etc and just stuck on the XDANDROID animation so i guess i missed something?!
Thank you in advance
http://www65.zippyshare.com/v/73240968/file.html
Edit: Im waiting the Official Release for Blackstone Tiad8 say.. ETA after 2 hrs will try it with Sure!!!
Click to expand...
Click to collapse
I use this (is in atachament ) and is working
put all Android from blazn_2011.04.06 and insert ts-calibration and Startup.txt, after instal android,and is not work just copy modules Black100 and zImage in folder with Haret
Good Luck !

DjMaryuslive said:
I use this (is in atachament ) and is working
put all Android from blazn_2011.04.06 and insert ts-calibration and Startup.txt, after instal android,and is not work just copy modules Black100 and zImage in folder with Haret
Good Luck !
Click to expand...
Click to collapse
still the same
will wait to try after few minutes the official release

Soon will be Avalible even more super fast and stability in the new Blazn 2.2.2
With Battery improvment, Faster SD card and alot other things.
Chek out this if you wana try it for yourself.
http://www.tiad8.com/showthread.php?t=38

So is this build better than frx06 whats the differences?

Oh well, reboots after running harret. Well this is somehow just a usual experience of android on blackstone - something critical doesnt work, well with this one nothing works. Can someone help me out?

root said:
Oh well, reboots after running harret. Well this is somehow just a usual experience of android on blackstone - something critical doesnt work, well with this one nothing works. Can someone help me out?
Click to expand...
Click to collapse
.......................
no!

Clock slow than normal
I try this and found the clock slower than normal. (I compare between touch hd-android and touch elfin-WM) First I set the clock at the same time, after one day HD time slow than elfin.

Hi guys,
im trying now to install this build into ext2 partition, but im absolut newbe.
What i have to write into startup.txt? Ext2 partition i have done on my sd card.

At last, the most stable one for me to use daily Even it works faster than windows The only problem for me is battery life. I hope we will have a nand version soon and it will be no problem then.. Thanks everybody working on this, THANKSSS

hi
tsalta said:
Soon will be Avalible even more super fast and stability in the new Blazn 2.2.2
With Battery improvment, Faster SD card and alot other things.
Chek out this if you wana try it for yourself.
http://www.tiad8.com/showthread.php?t=38
Click to expand...
Click to collapse
i tried it,its stabil and fast,without sim card,with sim blocks all the time...? any solution? thanks

...
kizaman81 said:
i tried it,its stabil and fast,without sim card,with sim blocks all the time...? any solution? thanks
Click to expand...
Click to collapse
and i have that with every android,still didnt found solution