Error 260 connection - Touch CDMA Windows Mobile ROM Development

OK everyone, need help here! I am trying to revert back to factory wm6.1 for verizon. I am using NFSFAN 6.5 right now with coke unlocker 2.31. I have read all the discussions here and try .41 and .40 locker and both are showing .36 when in Bootloader mode. Anyways I have tried every route I know to revert back to wm6.1 verizon and always am getting error 260 connection. I am using windows 7 home on my netbook if that helps anyone in helping me. PLEASE HELP.
Thank you,
Wyatt Cornelius

wcornelius said:
OK everyone, need help here! I am trying to revert back to factory wm6.1 for verizon. I am using NFSFAN 6.5 right now with coke unlocker 2.31. I have read all the discussions here and try .41 and .40 locker and both are showing .36 when in Bootloader mode. Anyways I have tried every route I know to revert back to wm6.1 verizon and always am getting error 260 connection. I am using windows 7 home on my netbook if that helps anyone in helping me. PLEASE HELP.
Thank you,
Wyatt Cornelius
Click to expand...
Click to collapse
Please refrain from opening new threads with questions. New threads are only allowed for contributions to the site (roms, kitchens, skins, apps, etc). Next time, please use the Q&A thread in this part of the forum. I have transferred your question over there. Thanks.

Related

please help

hi im a really new new newbie so please dont flame me
i know i may have posted this in the wrong section, sorry if i have
basically i am trying to upgrade my spv m3100 to black diamond 3.5
i have flashed the HardSPL to version IPL 1.04 and SPL 2.10olipro from IPL 1.01 and SPL 1.04 (HardSPL7) as instructed by the hermes guide website.
I am basically now trying to upgrade the radio to version 1.41.00.10: but when i run the ROMUpgrade.exe i am asked to specify the SPL i have, the Hermes guide website advised me to click auto detect, however when i press this i get the error message "Error, unknown version! you should pick SSPL"
please help as i dont know what i should do now, thanx everyone
http://www.mrvanx.org/cms/index.php?option=com_frontpage&Itemid=1
start reading...
The clincher is that it says "you should choose SSPL"..........but dont.......
select Bootloader 2.10 then tick the "is it HardSPL?" box.
This has been addressed a few times.
thanx for your help, im really sorry for being ignorent
xdaman85 said:
thanx for your help, im really sorry for being ignorent
Click to expand...
Click to collapse
thats funny....... thats the first smile i cracked all day...
no problem mate lol
man that upgrading process was stressfull
do you know what was running through my head during the process:
please not a 200quid brick please no lol
i had 6 ciggerates while upgrading, this upgrading stuff aint good for my health lol
wow i just answered this question 3 hours ago in the hermes upgrading section. just for fun, i did a google xda-search for the exact phrase "please help", came up with 13,400 results
lol
iv got a few problems now
if you lot can give me a link to another thread that would be great
it doesnt read the memory card, says its not installed
cant use bluetooth headset, cant connect active sync using bluetooth
sorry again
search for the answers they have already been addressed. we can give you a nudge here and there, but we are not going to spoon feedd you answers that you can easily find yourself. i would start by reading the black dymond thread. then get really good with the search tool.
good luck
Its a site dedicated just for upgrades and how to do upgrades.

Vogue Unlocker

I take no credit for this whatsoever. I can only confirm that it works and you are able to return your phone to stock by flashing the stock rom from sprint.
ImCokeMan created the Patched SPL to unlock the Vogue. You can get the needed information from the ppcgeeks forums.
utexascg said:
I take no credit for this whatsoever. I can only confirm that it works and you are able to return your phone to stock by flashing the stock rom from sprint.
ImCokeMan created the Patched SPL to unlock the Vogue. You can get the needed information from the ppcgeeks forums.
Click to expand...
Click to collapse
Please attach file if you are going to introduce it. Thanks.
He mentioned PPCGeeks, it would be bad to place file here because the discussion would get fragmented.
Here's the link to my thread though:
http://forum.ppcgeeks.com/showthread.php?t=12255
Can this be used for Bell's CDMA Touch?
Thanks
510jungleboy said:
Please attach file if you are going to introduce it. Thanks.
Click to expand...
Click to collapse
How about you follow the advice and visit the other forum.... no need to post the files here when there's already a good amount of discussion on the unlocker over at ppcgeeks.
simply put, don't be an ass. You can either take another member's advice or you can choose to ignore it. There's no need for smart ass comments.
utexascg said:
How about you follow the advice and visit the other forum.... no need to post the files here when there's already a good amount of discussion on the unlocker over at ppcgeeks.
simply put, don't be an ass. You can either take another member's advice or you can choose to ignore it. There's no need for smart ass comments.
Click to expand...
Click to collapse
I'm not trying to be an ass, But it sounds like you're trying to be a SMART ass from your message above. You might as well close this thread, make it a sticky and put message titled, " Vogue Unlocker - Please go www.ppcgeeks.com and join their forum to talk about the unlocker, and oh yeah please register also so that you can be able to download and post messages in their thread ".
If you use common sense, you should know why they have DEDICATED forums. The purpose of a FORUM is for user not have to surf or float from place to places. Don't come at me like that..... I'm just trying to make things easier for new users.
Edited: Your first paragraph is fine, but your second one was just tooo fine.
uhm ... i have a HTC Vogue. Bootloader says "NIKI100"
That sounds like the touch dual aka HTC Nike then. this is for a CDMA phone
CRAP the flasher is gone!
no it's not i edited the link in the ppcgeeks thread now. It was just FTP dir change.
I tryed this Unlocker... at first I was having trouble getting the PC to reSync after unplugging an plugging back in. Got it to Sync, but then after it installs the unlock an restarts.. When it restarts it loads sum TELUS file, an goes back to normal. Any help?
Problem unlocking HTC Touch
I am using the vogue unlocker tool and for some reason my active sync discontects from the mobile device as soon as the update starts. What can I do?
link going to ppcgeeks
for those who are looking for a proper link
http://forum.ppcgeeks.com/showthread.php?t=20370
I can write the rapidshare link but you can learn more if you can spend more time reading this thread ( link given above )

Question on flahs rom with Unsigned-Hard-SPL-Diamond-OliNex

Hey guys,
I was using Unsigned-Hard-SPL-Diamond-OliNex to flash b4 installing the new rom. it is showing 100% done and my phone reset, and all look fine...
however when entering bootloader screen it is showing me the version as 1.34.00 (sth like this), and check from the rom in the setting of the phone..it is still 1.34.xx (the original rom).
I was following the steps from some posts in the forums...but still the same..
Can anyone please help? sorry i am a newbie to pda phone...
Thanks again guys
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
I have a similar problem. When i made HARD SPL everything is ok, but when i try to make a ROM update there is an error massage on the screen. I tried with 2 or 3 ROMs and always the same ****... I downloaded the official one and it's the same... I made printscreen here it is ---> http://img29.picoodle.com/img/img29/4/7/2/f_gggm_0346e0b.jpg any ideas ?
maybe you installed the rom using sspl and hard spl did not install when you tried to install it. Not sure if this is possible.
Let check the Hard-SPL installed:
press volume down and soft reset (small red button) together and keep until comes out the 3 colored band in the screen, read the Hard-SPL version, it must be 1.40.
Let us know, ciao.
that's the windows error message saying it needs to close.. what's the error message the RUU gives.. it should have a number, or description of what happened. sure your download is not simply corrupt?
Well I have downloaded it 3 times already and every time i tried to make ROM update after HARD SPL my device cannot make upgrade and this error massage is on the screen.. I made soft reset after HARD SPL and there was no 3, but 4 colors on my screen...I thought that I ****ed up the phone, but for my luck I'm not hehe. BUT The f***in version is the same:
ROM version: 1.34.831.1 WWE. ROM date: 05/25/08. Radio version: 0.93.25.NS16. Protocol Version: 52.24.25.08H.
Please help, I don't know WTF!?!? That version is just NO COMMENT!
Thanks...
yeah can you please state the exact error message that comes up?
also, can you confirm you have Hard-SPL on your device.. if so, which version? (signed or unsigned)
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Yea after i followed the steps it is working all fine for me. I think my original problem is the way to enter boot loader screen, but then during the flash of the signed rom (1.37.456.2) i found that the version for boot loader is SPL-1.40.OliNex .
Now all is working fine, thx guys!!!
1 more question, if i have the hard spl installed, flashed a new rom. What should i do if i wanna flash another rom? (let say, after RUU-1.37.456.2 i wanna flash 1.37.401.3). Should i sspl and hardspl and install the new rom? Or i just simply install the new rom without hardspl again?
Thanks again!!
no, hard-spl is 'permanent' on your device unless you manually revert to stock SPL or something..
just flash another ROM without flashing Hard-SPL again
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Could you please stop flashing your site all the way here? Here at XDA there is a lot of info how to flash your phone, it is not needed to flash your site all the time here. One time is enough.
i'm not 'flashing' my site.. if one time was enough he would have already gone through the guide. i didn't even MENTION the site, either, simply gave him a link to the guide. if you take time to read the thread you'll find that it actually helped him get hard-spl on his diamond which is why the site was created so we can minimize these kind of questions and threads in the forums.. if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Thankz guys thatz helpful
racerx_ said:
if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Click to expand...
Click to collapse
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
sumitescp said:
maybe you installed the rom using sspl
Click to expand...
Click to collapse
not possible, at all, and don't try either, you could screw the device up if you try to flash a ROM we signed.
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
Is it me, or does his site look like a rip-off of mrvanx.org ?
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
ya, ridiculous cause there is no step by step upgrade guide with pics in the forum, and yeah all the info was there, but obviously some ppl have trouble reading so i gave him the info he needed. You on the other hand have yet to say anything helpful in this thread. So stop being a troll and post something useful. this will definitely be the last reply i waste on you
Olipro said:
Is it me, or does his site look like a rip-off of mrvanx.org ?
Click to expand...
Click to collapse
i think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
racerx_ said:
...I think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
Click to expand...
Click to collapse
I like the site and the content. Update it always like MrVanx did before to his info site. There's no harm done here.

Running unsigned apps... (WM 6.5 ROM)

I have been looking everywhere for the answer to this. D/L a bunch of stuff but nothing is working. I just installed the new 6.5 ROM for my T-Mo USA TP2 and I cannot find a way to unlock it so that I can run unsigned apps/cabs on it.
I have used search but I can't seem to locate the answer. Can anyone help?
Apologies - I realized I dropped this in the ROM Dev section - Still wouldn't mind the answer if anyone has it.
maybe this thread will help you.
app unlock
regards,
twisted
It looks like one of the ones I've already tried - but I'm gonna give it a shot! Thanks!

Internet Fix ASAP.

Hi i have the nagrom 6.5
i installed the sprint internet and gps fix
and the nfsfan sprint provision but it STILL doesn't work
it worked fine before but then i had to do a reset and now it doesn't work
please help im going on a trip soon and need my internet on my vogue =(
jdm4life said:
Hi i have the nagrom 6.5
i installed the sprint internet and gps fix
and the nfsfan sprint provision but it STILL doesn't work
it worked fine before but then i had to do a reset and now it doesn't work
please help im going on a trip soon and need my internet on my vogue =(
Click to expand...
Click to collapse
You may want to modify the title of your thread... people don't react too well to demands
Secondly, please don't open new threads only to ask questions. Use the Q&A thread instead since opening new threads should only be used for contributions to the site (roms, apps, fixes, skins, etc). I have transferred this question over there, so please follow it there. Thanks.

Categories

Resources