Our server address uses an ip address like ex. (xxx.xxx.xx.xxx:443) when i put this in as the server address it clears off the :443 we use that port to get in I have also tried the complete OWA address like it suggest xxx.xxx.xx.xxx:443/exchange & againg it only keeps the ip address. can any help I had it setup thru the alltel push seven program so I know it works but can't seem to get it working on here. I can sync it thru activsync but that don't help when i'm out of the office.
Related
I am currently using WM6 and am trying to get EMail through our Exchange server setup; however, my Dash s620 will not properly save the server's address.
The address for our OWA is (ex) mail.email.com:8888/exchange
and this address works fine in Internet Explorer etc, but when I enter this into the phone it removes the /exchange and only saves up to :8888, which then gives me "Error synchronizing" when trying to connect. Our Exchange server does have Exchange ActiveSync enabled along with Direct Push enabled.
Any ideas?
Thanks in advance
I think that you have to check your ActiveSync settings on Exchange. I know that Microsoft have a lot of KB's about that.
It does the same thing on mine, erases exchange, but mine is cool. Are you sure you are putting in the Domain?
jt76542 said:
It does the same thing on mine, erases exchange, but mine is cool. Are you sure you are putting in the Domain?
Click to expand...
Click to collapse
Yeah I've tried every which way I could think of for the login credentials.
I'll sift through some more MS articles tomorrow afternoon, see if I can't find anything... baffled though, really.
K this is going to be a huge PITA I can tell.
I adjusted the Virtual Directory for the default web site in Exchange System manager to point directly to /exchange, eliminating the need for anything after the :8888. It works fine in IE etc, quickly brings up a login prompt. Using the phone's IE and going to the http://mail.email.com:8888 works fine, prompts a login accordingly...
I configured a coworkers Blackberry to use our OWA and it works fine, but I'm not sure if it uses Push Email (Exchange ActiveSync).
What is it about the Dash that won't mesh? The server is not using SSL so I couldn't see it being a certificate issue (maybe it still is?). Is there anyone around who manages an Exchange Server and could perhaps shed some light on common settings that need to be adjusted for Exchange ActiveSync?
Such a nuisance
ActiveSync on the phone reports "The server could not be reached. Please verify the server name." Support code: 0x80072EE7
It reports back with this no matter how I enter the address (which again, works fine in IE). Devil phone
8888 is definetly not standard for publishing ActiveSync.
the software will connect to either MailServer:80 if the SSL checkbox is cleared or MailServer:443 if the checkbox is checked.
don't think you'll get ActiveSync connect to something else.
Why don't you change your port back to 80?
you are already exposing your server to internet without any form of protection (no SSL so your password can be sniffed over the network) and having port 8888 buys you nothing in terms of security since any port scanner will report the port as opened and eventually get the HTTP banner from the IIS Server.
So, get back to a standard config and you'll love your DASH again.
UM
Long time user of windows mobile devices and long time reader of this great forum ( well nearly 2 years anyway )
I've not contributed much as I dont posses the knowledge that some of you guys have.
For those new people that come on here the only advice I would ever give is search and read, the answers are nearly always there.
Anyway on to my point.
I have just set up an exchange server ( windows small business server 2003 ) and have things syncing across the airwaves nicely.
Laptop, desktop and mobile device all saying the same thing with no duplicates poping up. ( Always seemed to be a problem when syncing between two computers, for me anyway )
Also able to use Outlook Web Access.
Set this up for myself for a couple of reasons, firstly to make sure all computers where synced properly and secondly because it was worth a challange to learn how to do it.
If there are any people out there that would like the facility that exchange server gives PM me, as i will give it a go setting it up.
You will get exchange server syncing ( calender, contacts, tasks and emails ) with desktop/laptop outlook, outlook web access and an email address that you will can use to forward existing mail to. ( sorry only way to get emails to you )
Going to open this up for a couple or more people mainly to get it working properly. ( so far no problems for myself )
If I do open it up for more a donation would be nice to help pay for the outlay of equipment and for the increase in my electric bill to keep it going.
So if anyone is interested feel free to PM me.
What do you have it running on? Looking at doing the same myself.
Just a bog standard computer, nothing special
An old MSI K8 Neo motherboard with an Athlon 64 3000 2 Gig ram
Dual 250 gig discs in raid mirror for data
and a 120gig for operating system
Windows 2003 small buisness server with R2 technologies
it was also an excuse to upgrade by desktop as well.
well chuffed with how seamlessly it works with the syncing.
do you have microsoft direct push enabled on that exchange server? I would like to do that myself, don't know if it's possible
Yes got it set up.
They call it direct push but i think it goes more along the lines of your phone keeping a link open to the exchange server then as soon as an email is recieved it gets pushed across.
From what ive seen so far i'm sure the battery life is longer now than having the phone looking at a set time period for new mail.
Easy to set up as well, especially the phone side.
thanks, is the direct push functionality included in exchange server. Is it on the install cd's? I'd like to install it for my own domain, don't want to spend lots of money on blackberry server or services.
2.edge is enabled all the time on your phone, just as with blackberry? Does your phone send data at an interval, or is it the server that sends?
You need to make sure you have SP1 or R2 Technologies version for direct push with the server software
you have to set up a user profile that has permission to you the mobile services.
Also if your on a dynamic ip address its handy to have an external service set up to keep track of any changes there. And to get the full use of the server a domain name.
on the phone side you go to activesyn, and in the menu is configure server option. configure the server and thats it done.
The phone does seem to have a data connection all the time.
While i'm at work today i will write out the steps i had to do to get it working fully.
at work now so here we go :-
1) Get a domain name www.
2) If on broadband and on a dynamic IP use the services of someone like zoneedit for redirection.
(for remote access) vpn.yourdomainname to your broadband ip address
(for mail ) mail.yourdomainname to your broadband ip address
(for web ) www.yourdomainname to either your ip address if hosting it on your server or to the ip address of your web host.
(for ftp access ) ftp.yourdomainname to either your ip address if hosting it on your server or to the ip address of your web host.
follow the other instructions on zoneedit to forward the dns server addresses to your domain name admistrator.
3) Get Windows SBS or Server 2003 SP1 With R2 Technologies
4) Load onto a PC
5) Make sure all service patches and updates are loaded.
6) Download a program for updating any changes of dynamic IP address such as DirectUpdate and set up a couple of updates to the vpn mail and ftp.yourdomainname. ( easy enough follow the instructions )
7) Go through the todo list and set up wizards on the server.
a) make sure when setting up email and internet that in the creation of a certificate you put in vpn.yourdomainname
b) also make sure when setting up user access they have privilages for mobile access
8) go into internet explorer, content menu and find the certificate you have created and export it.
9) connect your phone via activesync to a computer connected to the server network and copy over the certificate.
10) run the certifcate on the phone to install it.
11) go to activesync on the phone ( can disconnect for this bit ) and set up exchange server using the vpn.yourdomainname
12) after that it should sync
I may have missed a couple of steps in that or have done something wrong but it is all the steps i can remember and it worked for me.
Hi all new here and got question regarding my new TP2, Im trying to setup my TP2 to sync with exchange but can not get it to work. I already inputted the username, password, domain, and also the OWA access information. My work's OWA address goes like this www.myjobaddress.com/extension , But after trying to sync it and when I check again it would just show www.myjobaddress.com without the "extension."
Is there a step-by-step guide somewhere? Is there anything else I need to do?
Thanks all in advance
yeah your server name in activesync shouldnt have the "extension". An Exchange server is an exchange server - with a FQDN: owa is a website residing at an addresss - sometimes with path after server name, not always, depends on the admin and the complexity of the setup.
i know that my owa address is waay diff than my activesync, etc server name.
Your admin or 3rd party provider should be able to give you a little config util that will setup your device properly, usually downloadable from a formatted txt msg. Or if you have access to your personal exchange control panel you should be able to get it from there - at the very least the correct info.
Hope this helps a little...
From what I've seen the OWA setup follows the standard as such webmail.company.com
It's been the same format in all the jobs I've had that had OWA access.
The other thing you can do is use Google Chrome, enter your OWA address then once it connects, on the new page that opens you can see the URL. It'll start with the format above.
The other thing you'll need is the domain name. And at times, that domain isn't the same as the company name. So you need to ask your Exchange admin.
All of this of course assumes your company is on Exchange 5.5 or 2007. If not you're not going to be able to get push email.
Thanks for the replies guys....I was able to get it to work. What I did was explicitly input this address "http://www.comanyname.com/exchange"
then just re-entered my username, password and domain. I had username in this format earlier "domain\username", I just removed the "domain" and entered just the username and it started syncing.
Thanks again guys
Has anyone successfully setup Gmail through the exchange connector using the Android mail app? I am looking for a way in which to provide push email but without getting threaded emails....
I have attempted to set this up on my handset however I keep getting told to try again later
Yep mine works fine. Username should be your full email address, and server address 'm.google.com', with encrypted SSL.
server address is m.google.com
SSL is on
working fine here.
Anybody else having trouble logging into work email through Microsoft Outlook?
Been working fine since day 1. What errors, if any, are you getting?
You typed an incorrect server address or the server requires a protocol version that Email doesn't support.
Thanks
Do you know your Exchange server's OWA address? That's what you want to put in there.
Got it thanks for the help mistake was on my part thanks again