Location Aware is an automatic volume profile switcher.
This application works out of the data received from GSM signals.(NO CDMA)
so almost all windows mobile devices can use it.I developed it on my elf and it seems it is working
Requires GSM network, Windows Mobile , .Net CF 3.5
1. Battery Friendly, No active background process.
2. No GPS needed.
3. User configurable interval to check for location.
4. Can save settings automatically v0.3
Well it works like this: (May change per version)
1. Install it.
2. Open the Location Aware(from programs)
3. When ever you start the app it will vibrate the device 2 times and then asks "Add this Location".
4. Click OK and it prompts to save the volume level for this location and save.
5. Adjust the volume level as you desire from the Slider on right hand side of screen.
6. Then goto Menu and Save Location Mode, this should save the setting for this location(Prompt will be displayed).
7. Now you can let the application run itself every X mins to check for new location and prompt you whenever a new location is found.
8. To set the interval time goto Menu -> "Stopped" this should open up a panel to enter the interval time, fill it and click set. "Stopped" should be changed to "Running". Now you can Exit.
9. If prompt is not dismissed or OKayed within 1 min(Automode). It dismisses itself and will prompt again if new location is found after next X mins.
10. The limit for interval is 2-60 mins, that means the app will run itself after every X mins and check for location, if a new location is found it vibrates
and then asks you to save this location or not, in case you dont respond to it, it will close itself after 1 min.
and in case the location was already saved it will automatically apply the volume profile.
Basically as you keep on using it the database keeps on growing and in parallel profile settings gets more customized.
PS: You may notice that the taskbar volume indicator is not changed, but that is normal. The volume setting is still applied as per your choice this issue is fixed in v0.3
V0.2
1. No alert popup will be displayed to inform select n save the location.
2. Save the location mode directly by clicking the volume level image.
v0.3
1. Reflect the volume level changes in the taskbar volume icon
2. New mode added "AutoSave", enabling it makes the app save new location automatically with the last volume preference, whenever a new location is found.
PS. AutoSave mode works in Scheduled mode, if you have set the app to run after a scheduled interval with autosave mode enabled and it detects a new location it will prompt a message-box, if you don't give it a response i.e ignore it, it will add the location automatically after 1 min and will dismiss itself.
for users of previous versions:
It will use the already existing database of location settings, just install it over the previous version.
PCBuddy
This app is used to plot all the collected points by the location aware app on google maps.
Unzip the files and then copy the locations.db file from your device to the same folder on your system. Once the file has been copied Run CreateMap.exe this should generate a html file in the same folder. Run that and see for yourself
Please replace the dll in PCBuddy with the one in 64Bit.zip in case you are using a 64Bit Windows
Suggested setting:
For the first time I suggest to keep the interval at around 5 mins so that it can grab almost all the desired locations. once you feel it is having settings for your daily use u may turn the interval to a higher(suggested 15 mins) so that it can apply the volume settings for the known locations.
SUPPORT LATE NIGHTS- DONATE!
No comments???
Great idea !
By using GSM signal to get your position you avoid to use the gps which take more time to get position + a little battery consumption.
We certainly can find a lot of functions linked to this automatic profile/location system
I will try your app
Vesperial said:
Great idea !
By using GSM signal to get your position you avoid to use the gps which take more time to get position + a little battery consumption.
We certainly can find a lot of functions linked to this automatic profile/location system
I will try your app
Click to expand...
Click to collapse
Thanks Vesperial, hope it works out fine
Hmmm
hmmm and I thought this was useful
it is a nice idea
but as a nice addon it would be cool, if it would be possible to add names for specific cell id locations and if the app would be a today plugin
diboze said:
it is a nice idea
but as a nice addon it would be cool, if it would be possible to add names for specific cell id locations and if the app would be a today plugin
Click to expand...
Click to collapse
thanks diboze,
well your ideas are nice but since i want to keep the user inputs to minimum i went on this way and about making it a today plugin...hmm i m not sure how to do that with a C# app
but suggestions are always welcome
Great Concept!!!!
Just saw your P.S. that the volume icon will not change accordingly...but it works as intended. (Please Fix) Is there a radius on the set locations? I work across the street from our main mall, is why I ask.
I love this concept as I saw the other O.S. had a similar app. (Sweet Dreams)
~PLUR~ Peace Love Unity Respect
~DJyoSNOW~
djyosnow said:
Just saw your P.S. that the volume icon will not change accordingly...but it works as intended. (Please Fix) Is there a radius on the set locations? I work across the street from our main mall, is why I ask.
I love this concept as I saw the other O.S. had a similar app. (Sweet Dreams)
~PLUR~ Peace Love Unity Respect
~DJyoSNOW~
Click to expand...
Click to collapse
Hi djyosnow,
understood your concerns about the radius thing but thaz not in myhands as that thing is dependent on lot of factors like, your disance from tower, signal strength etc. But still you may experiment if you get new location alert in case you are at your office.
n yes this is really nice ~PLUR~
Peace Love Unity Respect
Very good application, specially like me who travel a lot from office to client to mall and to our factory
I will give my comment after i use it...
devya said:
Very good application, specially like me who travel a lot from office to client to mall and to our factory
I will give my comment after i use it...
Click to expand...
Click to collapse
Sure will wait for your inputs. n hope you find it useful
v0.2 Out
Some modification in GUI and user interaction
Re mohitsapru,
i tested your app on my HD, it worked well
I have one suggestion to ease the way we can use it, an option like 'Save the actual sound profile automatically when a new unknown position is found'
Then we can move without thinking about it but it will be good as an enabled/disabled option.
Good job !
Vesperial said:
Re mohitsapru,
i tested your app on my HD, it worked well
I have one suggestion to ease the way we can use it, an option like 'Save the actual sound profile automatically when a new unknown position is found'
Then we can move without thinking about it but it will be good as an enabled/disabled option.
Good job !
Click to expand...
Click to collapse
Thanks Vesperial,
well about your suggestion it sounds good. right now it is dismissing it after 1 min i need to save the location automatically.. hmm sounds OK... will do it next time.
Thanks,
Mohit
Does this app able to detect the change of location if the device switched off(suspended) by power button?
For example:
1. Save volume setting at location A and location B
2. At location A, press power button to turn off the device
3. Move the device from location A to location B
4. Will the volume be changed automatically (without turning on the device) at location B?
ahlok_hk said:
Does this app able to detect the change of location if the device switched off(suspended) by power button?
For example:
1. Save volume setting at location A and location B
2. At location A, press power button to turn off the device
3. Move the device from location A to location B
4. Will the volume be changed automatically (without turning on the device) at location B?
Click to expand...
Click to collapse
Yes, it does. But dont forget to exit whenever you save a location setting
hey there,
this looks brilliant! ill try this out tomorrow!
thanks a lot
MG
MysticGenius said:
hey there,
this looks brilliant! ill try this out tomorrow!
thanks a lot
MG
Click to expand...
Click to collapse
Thanks MG,
Do let me know of your suggestions and experience using it.
Thanks,
Mohit
I have run it on my Samsung I900 Omnia and i think it works perfect.
But here some ideas:
It would be great if you can add 2 or more cells to 1 location (Because i have here to cells at home, and if I use UMTS 3G i had another one)
If you write the cell id a little bit greater.
And expert mode were you add name for cells (i see this wish earlier here, too), and can add more things.
Dtrieb said:
I have run it on my Samsung I900 Omnia and i think it works perfect.
But here some ideas:
It would be great if you can add 2 or more cells to 1 location (Because i have here to cells at home, and if I use UMTS 3G i had another one)
If you write the cell id a little bit greater.
And expert mode were you add name for cells (i see this wish earlier here, too), and can add more things.
Click to expand...
Click to collapse
Hi Dtrieb,
Thanks for trying it out.
Well i will think about the other two options/suggestions but i am not able to get what you meant by the first suggestion Which 2 cells are you referring to?
Related
My wife and I just got the T-Mobile Dash (s620, Excalibur, among other names) and we like it. However, we still have the following issues.
Can't turn off the backlight. (I think your right, I can deal with this.)
Backlight doesn't come on all the way in bright sunlight. (same here)
Can't find a slim, inward facing, plastic belt holster? (still looking)
Speed dial list isn't easy to get to (mapped to 2 - OK for now but would rather put this on my wife's Today Screen).
The 'touch' volume mechanism is silly. (will try setjogbar-free to begin using it as scroll instead, thanks caramelzappa and phonealarm -not free for vol ctrl, thx sergiopi)
Can't I just set the phone volume to as high as possible by default while I am on the phone and perhaps set hard buttons to control this? (thx again)
Can't modify the today screen. (still no great solution here)
Can't create Excel files. (will try Modaco-free but can't find it, thx sergiopi or Documents To Go-not free)
Can't set more than one alarm. (will try phonealarm not free, thx sergiopi)
Unlocking the keypad (press unlock > then *) is a bit of a nuisance. (I'm surviving)
Internet costs $20.00 - this is a rippoff, even at $6.00! (turning tzones into full internet access from the instructions found here.
Any assistance with some of these items would be greatly appreciated.
trpenner said:
My wife and I just got the T-Mobile Dash (630, Excalibur, among other names) and we like it. However, we have the following issues.
1) Can't turn off the backlight.
2) Backlight doesn't come on all the way in bright sunlight.
3) Can't find a slim, inward facing, plastic belt holster?
4) Speed dial list isn't easy to get to.
5) The 'touch' volume mechanism is silly.
6) Can't I just set the phone volume to as high as possible by default while I am on the phone and perhaps set hard buttons to control this?
7) Can't modify the today screen.
8) Can't create Excel files.
9) Can't set more than one alarm.
10) Unlocking the keypad (press unlock > then *) is a bit of a nuisance.
Any assistance with some of these items would be greatly appreciated.
Click to expand...
Click to collapse
1) Why? just in settings>power management choose the backlight time out!
2) If you live in Antarctica during the summer this could be a big problem!
3) just drop it in yout pocket, is strong enought!
4) ???? Set it then press the number you sat for a couple of seconds... done
5,6, 9) I agree, I use phonealarm, it does the job an much more!
7) This is your fault, not excalibur's fault, Home screen is fully easy XML and there are hundreds home screen already done for landscape WM smartphones on the net
8) Modaco has the freeware solution to create word and excel files on the dash-excalibur
10) IMHO I fount it safe and easy
and remember GOOGLE IS THE BEST n00b's friend!
1) Why would you need to turn it off manually? You can set it to after a while, or you can hold the end call button and just lock the phone.
2)Why do you need the backlight in the sunlight?
3)Save yourself the humiliation and put your phone in your pocket.
4)Holding down a button is difficult? Seems the same as speed dial as any other phone.
4)Search for setjogbar, makes the touch pad much more useful.
5)Just set it to the highest volume and don't mess with it anymore. If you install setjogbar you can make it so it only controls volume in call, and works as a quick launch/scroll strip otherwise.
6)Search for homescreens. There are plenty available, caurasal is a nice one that last time I checked is on the front page of this forum.
7)There are programs that are available. Remember, it's windows mobile, and it relies on programs to do things the same way as windows does.
8)I don't know about your alarm problem, I don't use them.
9)How is the unlock sequence different than any other phone? A soft key and then * is pretty common for unlocking phones. The only difference perhaps is that the dash has smaller keys than most, but you get used to them quickly.
and btw, just because I can...its called an S620....not a 630, thats the uber cancelled HTC Cavilier...so HA!!
ashasaur said:
and btw, just because I can...its called an S620....not a 630, thats the uber cancelled HTC Cavilier...so HA!!
Click to expand...
Click to collapse
point taken, thx ash.
I have noted what I am still looking for. Thanks for everyone's help with my newbie list.
sergiopi said:
Modaco has the freeware solution to create word and excel files on the dash-excalibur
Click to expand...
Click to collapse
I'm not finding this one.
you could also update your ROM to WM6, you could then use Office Mobile...which lets you create docs, excels, whatever on your device.....and also, you can goto www.madbeetle.com, they offer a free homescreen makeing application that lets you make a homescreen(today screen aka) from scratch using a nice GUI...that may help you a little..
ashasaur said:
you could also update your ROM to WM6, you could then use Office Mobile...which lets you create docs, excels, whatever on your device.....and also, you can goto www.madbeetle.com, they offer a free homescreen makeing application that lets you make a homescreen(today screen aka) from scratch using a nice GUI...that may help you a little..
Click to expand...
Click to collapse
Ash, thanks. I'll try madbeetle and and see how that works. Documents to Go won't as I can't find the crack for it. I am using WM6 and just went back into the Excel it comes with and can't figure out how to do a new Excel doc. Perhaps I am missing something?
Yeah, what you need to do, is first make an excel document on your computer...name is like blank.xml or somethin, whatever you want, and leave it blank, then on your Dash...open Excel Mobile and select your Excel doc, then click on Menu, the Save As, then rename it to something else, and it will create you a new file with that name, in addition to the one that you already had. Not real elegant, but it works with the software that you already have...no cracks or anything required!
ashasaur said:
and btw, just because I can...its called an S620....not a 630, thats the uber cancelled HTC Cavilier...so HA!!
Click to expand...
Click to collapse
If the S630 is cancelled? Why do I have it on my desk as we speak?
Very limited release my friend, HTC sent *some* out, but then decided to work on different products such as the Touch 2 and crap instead of focusing on another smartphone...go figure, since the S620 is like their best selling WM smartphone ever.....
ashasaur said:
you could also update your ROM to WM6, you could then use Office Mobile...which lets you create docs, excels, whatever on your device.....and also, you can goto www.madbeetle.com, they offer a free homescreen makeing application that lets you make a homescreen(today screen aka) from scratch using a nice GUI...that may help you a little..
Click to expand...
Click to collapse
hi have WM6 ROM 1.33 without Office Mobile 6. I then installed Office Mobile 6 found in one of the thread, and tried to create a doc, but i don't think it would let u. can u walk me through how to do it ash, thanks a bunch (sorry 4 my noobie)
Sure, it's not elegant, but it gets the job done. What you need to do is first using your desktop PC, make a Word, Excel, Powerpoint file etc, and name it something like NEW DOC MAKER or the like and leave it blank. Then, transfer it to your device. Now open up whichever program you created it for(Word, Excel, PP etc) and wait for it too load. Once its loaded, press MENU, then select SAVE AS....and name it something else..like FOODZ or the like and hit SAVE. It will then create a new blank document called what you just specified in the same directory or folder as the original document. Hope this helps!
trpenner said:
My wife and I just got the T-Mobile Dash (s620, Excalibur, among other names) and we like it. However, we still have the following issues.
Can't turn off the backlight. (I think your right, I can deal with this.)
Backlight doesn't come on all the way in bright sunlight. (same here)
Can't find a slim, inward facing, plastic belt holster? (still looking)
Speed dial list isn't easy to get to (mapped to 2 - OK for now but would rather put this on my wife's Today Screen).
The 'touch' volume mechanism is silly. (will try setjogbar-free to begin using it as scroll instead, thanks caramelzappa and phonealarm -not free for vol ctrl, thx sergiopi)
Can't I just set the phone volume to as high as possible by default while I am on the phone and perhaps set hard buttons to control this? (thx again)
Can't modify the today screen. (still no great solution here)
Can't create Excel files. (will try Modaco-free but can't find it, thx sergiopi or Documents To Go-not free)
Can't set more than one alarm. (will try phonealarm not free, thx sergiopi)
Unlocking the keypad (press unlock > then *) is a bit of a nuisance. (I'm surviving)
Internet costs $20.00 - this is a rippoff, even at $6.00! (turning tzones into full internet access from the instructions found here.
Any assistance with some of these items would be greatly appreciated.
Click to expand...
Click to collapse
I found the freeware Schedy Mobile for creating multiple alarms with your own sound and display messages, check it out HERE
Run this app in the background to use the G-Sensor as a DPad. Seems to work with cursor (in word etc) and, start menu, list boxes etc.
Comments/feedback appreciated (but please remember it is a work in progress!)
Version History
Added sample full config with descriptions
Added <VK_DPAD> option in config xml to increase compatibility.
Version 0.9:-
Bug fix to tilt logic
Added more override options for individual applications (e.g. MaxX/Y, DeadZoneX/Y)
Uploaded XSD for config file (contains some documentation)
Version 0.8:-
Added hardware key toggle to config file
Version 0.7:-
Moved all settings into config file
Improved UI
New "Switch" mode added
New "KeySend" methods added (SendMessage & KeybdEvent)
Version 0.6:-
Minor bug fix
Version 0.5:-
New config file format, to support...
Acceleration mode!
Version 0.4:-
Better matching of exe names (oops!)
Version 0.3:-
Allowed list now works from exe name (rather than window title)
Version 0.2:-
Config file
Proportional directions
Non-flat center/neutral point (config - CenterX/CenterY)
"Dead Zone" (config - Threshold)
Restriction by program (config - Application)
Have a play and let me know your thoughts.
I'll give her a look see --- not happy with the virtual SIP solution I've been trying to code. I was wondering if I could detect a hardware key (like the back arrow) and then use the g_sensor for scrolling if and only if that button was being held. That way apps aready using the g-sensor could continue to use it and users could have greater control over what was scrolled and when. Since you already have taken this this far I throw the idea your way to run with it if you want to... if not that is fine too.
Blessings my friend in the new year!
PS-If you want to collaborate in coding send me a PM
Seems to work as intended... The single-hardware button "hold to enable - release to disable" would make this a real solution... Are use using Dutta's Unified Sensor API "My Brain Hurts website"?
Good work so far
how do you install this??
Excellent !!
exactly what I was looking for, great job!
I'll test it in some games unusable without d-pad and report.
thanks !
patterns said:
how do you install this??
Click to expand...
Click to collapse
I copied the files to my SD card and ran the exe... switching to another application then uses g-sensor as directional arrows... stopping EXE kills behavior... at least that's what worked for me
I tried it out and this seems promising. Below are some things I would like to see added to make this truly useful.
1. You do not want to have it active all the time so you need an easy ability to activate/deactivate it as already stated above. Either by pressing and holding a hardware button or by pressing and holding a certain area/corner of the screen.
2. When I hold the phone in my hand the neutral position is almost never the completely flat position. I think the position of the phone when you activate it according to 1. above should be taken as the neutral position. Any relative movements from that position should then be interpreted as left,right,up and down.
3. Make the speed of the scrolling configarable.
4. Make the speed of the scrolling proportional to the movement from the neutral position. If I move only slightly from the neutral position it should scroll slowly and if I move it a lot it should scroll faster.
5. A per application filter would also be really useful. For each application you should be able to specify ig G-Pad is active always, never or when activated according to 1. above. The default for unlisted applications should be to activate it according to 1. above.
Don't hesitate to ask if you have any questions regarding my suggestions. I don't think any of them should be really hard to implement.
Keep up the good work. I look forward to the next version of this.
Wow, so many responses! Like I said initially, its a work in progress. On the "ToDo" list is :-
1. Config File!
* Threshold setting (how much to tilt before registering
* Center (i.e. what angle is neutral instead of flat)
* Application list
2. Proportional control
I'll add the other suggestions to my list.
Cheers
Great work! The most wanted for me is the possibility to map it to a button, so by pressing the button your program is enabled, by pressing it once again, it is disabled again.
Another idea would be that it is just enabled while you are pressing the button, whereas it is disabled when you are not pressing the specified button.
But its up to you .
johnpatcher said:
Another idea would be that it is just enabled while you are pressing the button, whereas it is disabled when you are not pressing the specified button.
Click to expand...
Click to collapse
This makes the most sense to me, browsing lists for instance would be so much more practical.
Keep up the excellent efforts!
1.)How is this virtual d-pad different of GController ?
2.) Can you move the map in Age of Empires 1,25 with this ?
excellent idea and a very promising start. thank you and Happy New Year!
this thread belongs to the "themes, applications and software". i'll try to persuade one of the mods.
Wolfenzi said:
1.)How is this virtual d-pad different of GController ?
Click to expand...
Click to collapse
Thats written for the Diamond (not 100% on HD) and development has stopped
Wolfenzi said:
2.) Can you move the map in Age of Empires 1,25 with this ?
Click to expand...
Click to collapse
No idea! I dont have AoE so once its up and running properly (its still in very early alpha!) I'll ask people to post compatible & incompatible apps.
Looks really promising! Seems to work pretty nicely. I think the two main things I would like would be similiar to what people already asked:
- An easy way to toggle it on\off rather than running the application and killing it.
- A way to calibrate the sensitivity threshold. It reacts rather quickly now.
Good job!
Ideas
I've been thinking about this more... if you allowed a program button like the BACK ARROW to temporarily activate when pressed, read current orientation and then applied scrolled based on the orientation delta from the initial orientation and then disabled scrooling once the BACK ARROW was released. This would solve the "Gee its not flat" problem and the enable/disable issue. Other configurable options might include as noted above -- changing g-sensor sensitivity; limiting scroll direction (N-S or E-W)
Can't wait to see your next version... I've suspended work on my v-DPad because i think yours will be the better solution
Has anyone tried this on a Touch Pro, i might do it right now and get back to you guys
EDIT: Well I just tried this on my Touch Pro and it works prefect, but it would be awesome if there was a way to disable it when using TF3D because you have to have the phone perfectly flat or it will move around on the tabs, or maybe make settings for it to disable in some programs
Very nice app, I will keep my eye on this one, Thanks!
Very nice!
I think this is the perfect solution as it allows to control everything with the GSensor. Too bad GController development has beed stopped, I hope this will be the perfect successor.
Great job!
This is really great work and has a lot of potential.
Let's wait for a more "finished" version.
thanks
It's so amazing good job
Work in PocketGBA (GBA emulator)?
Does this app work in PocketGBA?
Can't play GBA games on my mobile now since i upgrade my phone to HD as PocketGBA require hardware buttons for directions control.
GBA on Morphgear is just too slow with the sound on
First off this would not be possible without the work of many devs in many places. Some of the builds that have really helped get this done:
The base build I started with:
[Android] Eclair 2.1 by mssmison
Builds/Devs that helped me get this far:
polymod 2.1 alpha 4 by polyrhythmic that is itself is based on openeclair 1.1.5
dzo, wesgarner, ctso, many more who have contributed to openeclair
Please try both of these and My build and post your results, I want to know what works and what doesn't. It also will help to know what works better on whose build.
Here it is folks Android running from NAND on your kaiser/tilt!
What works:
WIFI - you no longer need a calibration file from Windows Mobile.
GPS
Phone
Sleep
Battery - See here: http://forum.xda-developers.com/showpost.php?p=5695425&postcount=126
What doesn't:
Bluetooth? I have random results still
Camera
Youtube
Jbed - read thread for working install and instructions
I am in no way liable for whatever may happen to you or your phone!
This will erase/replace windows mobile.
How to get it:
Step one:
If you do not have the latest nbh get dzo's from here:
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
or vilord's
http://sourceforge.net/projects/androidhtc/files/
and flash it to your phone.
Step two:
Perform a hard reset on the phone, then remove the battery.
Step three:
Download my package and place the androidinstall.tar in the andboot folder on the root of your sd card.
Old link for reference only -Version 1.0
Old link for reference only -Version 1.1 Update Patch
Pre-Patched Version 1.1
Place your sd card in your phone put the battery back in and power it on.
Watch the screen and once it tells you to press and hold the D-Pad center button (do it fast!).
Choose the install option and answer "Yes" when it asks to clear your data.
Step four:
Choose quit and wait for the big green android!
If you get a second google account setup screen after entering your info once just hit the home button or reboot.
*notes*
Starting wifi during the initial setup works but the setup app FC's and goes back to the start wifi screen. The wifi actually does start but you cannot choose a network until you complete setup.
You must have a sd card to boot (not with vilord's kernel)
LCD density is set to 160 as I believe with a 320x480 nbh yields the best usability and market selection.
I the screen flips the wrong way instead of going back to portrait mode open "spare parts" and uncheck "launcher rotation"
(you can also go to Settings "Sound and Display" and uncheck Orientation")
(Works on polaris and vogue as well)
To report, view, and track bugs with KaiserDroid just go to http://bugs.homecncfun.com . You can either Signup for an Account (preferred) or Login Anonymously
If you like my work consider donating to my Gadget Fund:
DONATE
Typo in your link, looks like it's missing the "h" at the beginning (thanks to your sig for the clue haha). I'm downloading it now, going to try it out and report back with the results.
aqtrans said:
Typo in your link, looks like it's missing the "h" at the beginning (thanks to your sig for the clue haha). I'm downloading it now, going to try it out and report back with the results.
Click to expand...
Click to collapse
Thanks got it fixed, let me know how it goes.
Just got it setup, some things I've noticed so far:
Setup Wizard got stuck in an infinite loop right after setting up my Google Account. It signed me in, started syncing just fine, but the next screen asked me to setup a Google Account again. Signing in led me to another Google Account setup page. A reboot fixes this though.
Might want to note that your build.prop has the lcd.density set to 160, most NAND builds I've ran have had it set to 120 or 113 or had a choice.
So far it's been a lot faster than other Eclair builds I've tried! Awesome work!
aqtrans said:
Just got it setup, some things I've noticed so far:
Setup Wizard got stuck in an infinite loop right after setting up my Google Account. It signed me in, started syncing just fine, but the next screen asked me to setup a Google Account again. Signing in led me to another Google Account setup page. A reboot fixes this though.
Might want to note that your build.prop has the lcd.density set to 160, most NAND builds I've ran have had it set to 120 or 113 or had a choice.
So far it's been a lot faster than other Eclair builds I've tried! Awesome work!
Click to expand...
Click to collapse
Thanks for the feedback, I'll add some more notes to the 1st post.
I don't normally have a sim in until after I get it setup and tested so I just skip the initial setup so i must have missed that.
How does the speed of this build compare to polyrhythmic's? I tried that and unfortunately it was unbearably slow even off NAND. I guess it's back to WinMo for a little while
chambo622 said:
How does the speed of this build compare to polyrhythmic's? I tried that and unfortunately it was unbearably slow even off NAND. I guess it's back to WinMo for a little while
Click to expand...
Click to collapse
I may be a little biased but I would use this as my only phone, comparable to openeclair on my mytouch without the swap turned on.
screen rotation
I the screen flips the wrong way instead of going back to portrait mode do this:
open "spare parts" uncheck "launcher rotation"
slm4996 said:
I the screen flips the wrong way instead of going back to portrait mode do this:
open "spare parts" uncheck "launcher rotation"
Click to expand...
Click to collapse
Or Settings/Sound & Display/ Uncheck Orientation
you didn't say weither tha camra works or doesn't
sheridan101 said:
you didn't say weither tha camra works or doesn't
Click to expand...
Click to collapse
Sorry, that would be a no for right now. Anybody got any tips? I'll update the 1st post.
Which nbh to use?
Ho do I know which .nbh file to use? There are so many of them.
For instance:
kaisimg-panel2-320-15-02-10.nbh
kaisimg-panel1-320-tilt-15-02-10.nbhWhat is the difference between the two?
What does the following stand for:
The panel2 and panel1
320 or 480
You get the picture... Basically - how do I know which one fits my device?
Thanks,
Eran
ebarten said:
Ho do I know which .nbh file to use? There are so many of them.
For instance:
kaisimg-panel2-320-15-02-10.nbh
kaisimg-panel1-320-tilt-15-02-10.nbhWhat is the difference between the two?
What does the following stand for:
The panel2 and panel1
320 or 480
You get the picture... Basically - how do I know which one fits my device?
Thanks,
Eran
Click to expand...
Click to collapse
#1 check a default.txt that you used in the past to see what your panel type is, nobody can tell you what you have. I have a tilt and use panel 2. You may need to pick one and try, if the colors are messed up, try another
#2 the 320 is a resolution of 240X320 and the 480 is a resolution of 320X480
I always use the 320X480; then edit the /system/build.prop file to make the lcd.density 160; makes it close to 240X320 but you get all of the market apps
@ slm4996 any chance of getting this as a HaRET compatable? I have some programs that require I have windows, so I can't NAND now; and I would like to try this one out
INT Maps Navigation
I check your tar and i notice tha inside app folder there isn't Google Maps, Nav launcher and so on, it's possible to add it manually, importing the right apks inside the folder, and if it's possible where i can find the apks?
P.s. Your old build is great, as soon as my phone return from repairing, I will be glad to try this new baby...
Can I run this build from SD card?
j101399j said:
#1 check a default.txt that you used in the past to see what your panel type is, nobody can tell you what you have. I have a tilt and use panel 2. You may need to pick one and try, if the colors are messed up, try another
Click to expand...
Click to collapse
Correct, couldn't have said it better.
j101399j said:
#2 the 320 is a resolution of 240X320 and the 480 is a resolution of 320X480
I always use the 320X480; then edit the /system/build.prop file to make the lcd.density 160; makes it close to 240X320 but you get all of the market apps
Click to expand...
Click to collapse
If you get the 480 version my build.prop lcd.density is already set to 160. (@j101399j great minds think alike)
j101399j said:
@ slm4996 any chance of getting this as a HaRET compatable? I have some programs that require I have windows, so I can't NAND now; and I would like to try this one out
Click to expand...
Click to collapse
Give me about 15 minutes for a test version to upload and then:
http://homecncfun.com/android/KaiserDroid-1.0-haret.zip
new version
http://homecncfun.com/android/KaiserDroid-1.1-haret.zip
Please test both.
Please note that you will have to do a install the first time you run haret so be sure to watch for the prompt to hold D-pad center.
milanche said:
Can I run this build from SD card?
Click to expand...
Click to collapse
You can try the package in post 16
samtruman said:
I check your tar and i notice tha inside app folder there isn't Google Maps, Nav launcher and so on, it's possible to add it manually, importing the right apks inside the folder, and if it's possible where i can find the apks?
P.s. Your old build is great, as soon as my phone return from repairing, I will be glad to try this new baby...
Click to expand...
Click to collapse
Unless you are across the big pond google maps should install from the Market. Navstarter I can look into.
Inclusion/removal of apps?
Should I add or remove any apps out of the default build?
So far we have requests for:
Google maps
Navstarter
I'm not sure how I feel about including maps since it can be downloaded from the Market on this build...
slm4996 said:
Should I add or remove any apps out of the default build?
So far we have requests for:
Google maps
Navstarter
I'm not sure how I feel about including maps since it can be downloaded from the Market on this build...
Click to expand...
Click to collapse
My intention is to have the modiefied version of Google Maps with Nav launcher, 'cause I'm from Italy and in Europe Google Maps don't have the navigation enabled, we must use maps4.0.0-brut4.apk to enable it.
I have tried to put it insiede your old build but without success, it doesn't let me install the needed file to get it working, maybe i forget to put something else needed...i'll try with the new one as soon as possible....
The files that i'm writing about are inside OptionalApps pack of last poly builds...
I’ve noticed that in most development threads there are users complaining about not being able to get Google Now working correctly. I thought I’d share the steps I’ve taken to setup Google Now, and it’s been working perfectly for me.
Before we begin there are two things to clear up. Firstly, in order for Google Now to work properly you are going to need to be OK with easing off on several privacy settings. You will need to enable Web History and Location Sharing; so if you are uncomfortable with this or are a bit of a privacy nut (nothing wrong with that!) then Google Now is not for you, and will never work as intended.
Secondly, Google Now takes time to gather information about you before it will start working as you expect. This means you need to use it! Anytime you are doing a Google search from your phone, use Google Now; when you’re waiting for a bus, open Google Now, etc. After a few hours/days (depending on how much you use it) it will begin to display your Now Cards correctly.
Prerequisites:
1.A Jelly Bean custom ROM (e.g. TeamNDVRu CM10)
2.Google Now enabled (obviously)
3.Google Maps installed
4.At present Google Now will only work correctly when using English as the default language (US/UK both work)
Before using Google Now
Enable Web History:
1.We need to enable ‘Web History’ for our Google searches. From your desktop/laptop go to your Google Account settings (click your username/email address on the Google homepage and go to Account).
2.Select ‘Products’ then scroll down and select ‘Web History’. Ensure this is enabled, if paused click ‘Resume’. Web History is now enabled
Enable Location Sharing:
1.Open Latitude (found in your app drawer). Go to settings.
2.Make sure ‘Location Reporting’ is set to ‘Your location is reported automatically’
3.Make sure ‘Enable Location History’ is ticked. You can set the ‘Check In’ options as you wish, I don’t use this feature myself.
4.Open Google Maps. You should see your Latitude location centred on the screen. Click your avatar (the square pic pointing out your location). Select your name. Select ‘Location Settings from the pop-up menu.
5.Press the menu key and select ‘Change home location’ – enter your home address. Then press the menu key again and select ‘Change work location’ – enter your work location (this can also be your School/University if you want)
6.Location Sharing is now set up for Google Now
Google Now Setup:
1.Open Google Now and follow the on-screen instructions. Select ‘Yes I’m in’ when prompted.
2.Press the menu key, select ‘Settings’
3.Select ‘Now Cards’ – you can set this up as you wish, depending on what features you want to use and how you want to use them. It’s pretty self explanatory.
4.Go back and select ‘Voice’. Set language to ‘English UK’ or ‘English US’ (At present only English as default will work).
5.Select ‘Download offline speech recognition’. Go to the download tab and download ‘English UK’ language if you want to use it (US is default). – it’s a small download
6.Go back and select ‘Privacy and accounts’. Make sure ‘Location and Google Search’ + ‘Show recent searches’ + Search on google.com’ are all ticked.
7.Go back and select ‘Phone search’ – set this as you wish, if you don’t want Google Now to search your contacts for instance, then un-tick it.
8.Google Now is now setup properly, start using it!
Notes/Tips
-If you use Google Apps for Business you will need to perform an extra step. Login and go to Settings, scroll down and select Mobile. There will be a checkbox ‘Use Google Now’, make sure this is ticked.
-To have the Calendar card work properly you will need to set times and locations for your appointments/reminders. E.g. you’re doing an early shift in work, so set your appointment location to your work address, then set the times to the shift start/end times rather than ‘All Day’. The card will popup a few hours before your shift and should bring the Traffic card along with it to tell you how long it might take you t o travel/when to leave to arrive on time.
-Depending on where you live the Public Transport card may not behave as you would expect. In the area of London I live for instance, the Now Card will only show when I’m near major stations/bus stops and will not show for every single one. This may vary around the world, or even in different areas of the same city.
-Some Now Cards may never show, they are all situational (you can set the Weather to always show, but it’s the only one). It depends entirely on how you use Google Now. E.g. if you never search for your football teams results or fixtures, then the Sport Card is never going to show.
-When out and about, turn GPS/WiFi on to get a better fix on your location, helps with the Public Transport card especially.
Hopefully this gets some of you going with Google Now. Some of the steps may be superfluous but, again, this is just what worked for me after many frustrating hours of trying to figure it out!
To do: Add screenshots
Nice write up Man...Have you had any trouble with GNow adding unwanted sports teams to your cards? I can't seem to shake the LA Galaxy soccer club. I don't like soccer, much less the Galaxy.
Thanks for this mate, its awesome. I know this question may seem like I'm noob, which is because I am. I have had a little search but not sure if there is a way to get Google Now working on a sense rom on 4.0.4 such as ARHD?
Don't hate, just asking a noob question
Thanks
I can't read black on dark grey, there's not enough contrast. If you're going to set the font colour (please don't) to something, can you also set the background colour so there is some contrast? Cheers.
Perhaps I'm just missing something, but I followed these instructions to the letter and regardless, every time I open up the Google Now settings the top right on/off "switch" has defaulted back to off. Anybody having similar problems?
Good write up, thank you! Installed the new Maximus ROM last night, got a cool Google Now surprise this morning.
Looked up the web sites of two computer stores and a restaurant menu on my desktop computer. Then picked up my phone, and cards had popped up showing directions to the stores and restaurant, with travel time estimates and traffic updates. Pretty cool!
Good selection of sports teams on there now, I'll be stoked when they expand the service with more offerings.
Just installed the Maximus ROM too and used your guide to set mine up. This thing is something else. LOL. Very impressive
Is anyone having issues with sports fixtures displaying the wrong time zone on GN? I have a card for my team, but when I press the card and am directed to Google the fixture times are in US Eastern Time even though the team and I are in the UK
getting a removed card returned
I accidentally removed a package tracking card and can't seem to get it back. Any suggestions?
ruoppster said:
I accidentally removed a package tracking card and can't seem to get it back. Any suggestions?
Click to expand...
Click to collapse
Hi,
you probably swiped away the card, for that moment the card is gone, but somehow it will turn up once you open up Google Now again. if not, sometimes, a reboot of your phone will show up the card afterwards., at least, for me this helps! :good::cyclops:
Good luck mate!
---------- Post added at 12:20 PM ---------- Previous post was at 12:17 PM ----------
Nice thread! :good:
Just have a minor question, hope somebody can help me with that. I was wondering if Google Now needs Auto Sync been turned on permanently. It does save me alot of battery and data usage if I can leave it off. I think personally that Google will collect information anyway wih Now because I have my location settings turned on.
Can somebody tell me??
Thanks and I wil def follow this Thread!
My tip is to disable the useless POS. All it does is rinse your battery with constant wakelocks!
Until they improve it and make it vaguely useful it will be switched off.
And ppl like me,who can't change language to English US or UK ... What we to do?! ^^
Sent from my HTC One X using xda app-developers app
Markoleti said:
And ppl like me,who can't change language to English US or UK ... What we to do?! ^^
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Download more locale 2 from the play store and change the system language to either US or UK. I'm on 044 (Asia) and for me it works flawlessly.
Sent from my HTC One X using Tapatalk 2
Using the Google APP
Does it work using the chrome browser?? every time I try and search through the google app on the app page it tells me it cant display search results and then downloads something called search.bin???
Help please??? Many thanks
Pietje_1985 said:
Hi,
you probably swiped away the card, for that moment the card is gone, but somehow it will turn up once you open up Google Now again. if not, sometimes, a reboot of your phone will show up the card afterwards., at least, for me this helps! :good::cyclops:
Good luck mate!
---------- Post added at 12:20 PM ---------- Previous post was at 12:17 PM ----------
Nice thread! :good:
Just have a minor question, hope somebody can help me with that. I was wondering if Google Now needs Auto Sync been turned on permanently. It does save me alot of battery and data usage if I can leave it off. I think personally that Google will collect information anyway wih Now because I have my location settings turned on.
Can somebody tell me??
Thanks and I wil def follow this Thread!
Click to expand...
Click to collapse
I don't know if I'm allowed to post this, but I wrote a MASSIVE article detailing loads of uses for Google Now.
Find it here
66 Amazing Google Now Commands
Can any one guide me how to show up the newly added cards movies, news etc?
Sent from my GT-I9082 using Tapatalk 2
Now commands problem
I have my android system in english but i have configured google now voice recognition in spanish. The problem comes when I want a command like weather, questions, etc. Voice recognition captures correctly what I said in spanish but all it does is search for that text in Google, even if it is a command. The problem is solved when I change my voice recognition to english. Also tried to set my android system in spanish along with voice recognition in spanish and commands worked.
So my question... ¿how can i have my system and voice recognition in different languages using voice commands?
Thanks
jamesjones02 said:
Does it work using the chrome browser?? every time I try and search through the google app on the app page it tells me it cant display search results and then downloads something called search.bin???
Help please??? Many thanks
Click to expand...
Click to collapse
Hi James,
sorry for my late reaction! I think it depends on if your Chrome Browser is the default browser on your device. When it is en and it's still giving you that message, I should check if it appears all the time or just when you're starting Google Now. If it does, maybe you should re install Chrome and try it again! :fingers-crossed:
Here it's working fine!
Good luck fella!
Regards,
Jeroen
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
peredo.marco said:
I have my android system in english but i have configured google now voice recognition in spanish. The problem comes when I want a command like weather, questions, etc. Voice recognition captures correctly what I said in spanish but all it does is search for that text in Google, even if it is a command. The problem is solved when I change my voice recognition to english. Also tried to set my android system in spanish along with voice recognition in spanish and commands worked.
So my question... ¿how can i have my system and voice recognition in different languages using voice commands?
Thanks
Click to expand...
Click to collapse
That's because Google Now is only configured to give you reply or a card, whenever you put the voice command in English. Other languages are not supported yet to give you a spoken answer or card. You should put everything in English and then you'll see it works. Otherwise you should wait untill they have support for voice commands in Spanish!
Good luck!
Cheerio
Hey, lately I was wondering to start use Google Now but there's one thing I'm worried about the battery usage, does it consume a lot of battery? Because I always get to 5% battery in the end of the day..
The drain comes from the constant location reports needed for GN to work properly. They cause enormous amount of wakes so yes, it drains.
New Way to Bypass LG - Google Factory Reset Protection on VARIOUS Devices!
Ignore the poor grammar, typos etc.. Bits and pieces from notes.
--needed--
bluetooth (needed)
data cable (needed)
computer (needed)
Factory reset phone, forward through setup wizard and turn on wifi then... --->
enable service menu with tool - so youll need to select the modem port then on the app goto "open port lg" then after this goto option "open hidden menu" now you are in the hidden menu. --->
goto - on hidden menu .. field test -> gps test -> gnss test or gns pos test -> now youll see a warning screen hit ok. youll now be in location within settings ---->
turn on -> google location history at bottom click it -> top right 3 dots click then view/manage which brings you out to maps.. now hit back button and you will be in maps now.
-
online way - online way into the removal process
offline way - offline way around and into the removal process
-online way -> Hit top left 3 bars and then start driving and set destinations to KFC for example, start driving then press the mic at top right and say "settings"
[Online] In settings goto Apps -> disable and force stop if you want, google play services, both setup wizards, google account manager, and google services framework and also clear data for each also if you want
Next reboot, and when phone opens up to setup wizard use your bluetooth and say open google or just press it and on the google screen when it pops up search for example gmail then scroll down through the results until you see a big gmail icon and 3 dots to the left.. hit these and share.. it might also look like a share icon instead then share to msgs ... put in a random number and some txt, attach your location by hitting the paperclip. make sure to send it (doesnt actuially go through unless youve active service card in..)
Click on the location link and click connect and it will open up maps, start a route, start driving then push the microphone and say open settings. When settings opens up goto Security and enable unknwon sources.. press bluetooth again and say open google or toggle back to the google search screen (bluetooth is your best bet as UI will crash sometimes and put you back at the setup wizard)
When google opens click on the G at top left then search for example "frp video youtube" for example.. scroll down results until you see a youtube site link and click on it. This *should* open up youtube once it opens up top right click and goto about and this will open chrome ..now search in google this http://google.com
download these: (your typical stuff for example "vnrom_frp, gam_6.0, apex launcher (or any other launcher... id suggeat older versions as newer can reset your order and land you back at the setup wizard) .
[Offline] Hit 3 left lines at top and then go down to offline areas and youll see offline areas settings then click on settings under "to save your cellular data while using google maps" click top right 3 dots and click show tab view now all the settings sections are back
Turn on bluetooth and pair ear piece incase you mess up and need to get back to zomewhere
Follow through as you would online version.
Let me know if you find the AT commands!
Credits for app attached in next post goto those Yemen Fellas who have so far been able to bypass anything in front of them LG/Samsung Carrier - Sprint!! Tracfone --> FRP/Unlock
Credits also to XDA user @CXZa as if it weren't for him i probably would not have looked deeper into AT commands (still have barely scratched the surface).
almost forgot... here is the app to use in the steps leading into the OS for factory reset bypass.
Tap this and that.. These are kind of fun - sometimes. Sometimes quite complicated.
This one is for LG m250f 2017. Should work for mine too, m250n.
(Two seconds wasted...)
Not long ago I accidentally removed my Google account when testing vold triggers.
Simply by doing
setprop vold.decrypt trigger_shutdown_framework
and
setprop vold.decrypt trigger_restart_min_framework
did the trick. Other accounts are kept and no resets, etc... only but is that you have to have a root access...
The min framework was totally empty of icons, didn't ask for the pin.
I don't how the trick works on other devices. It was a LG...
To restart normally after it.
setprop vold.decrypt trigger_reset_main
setprop vold.decrypt trigger_restart_framework
Thanks. I will take a look. Almost seems like everything I am doing is too much. These LG devices are a tad bit more difficult in areas i guess you could say.
also.. hope you ignored all the other b#ll**** I had in the removal guide ha.. simply my personal notes.
noidodroid said:
Thanks. I will take a look. Almost seems like everything I am doing is too much. These LG devices are a tad bit more difficult in areas i guess you could say.
also.. hope you ignored all the other b#ll**** I had in the removal guide ha.. simply my personal notes.
Click to expand...
Click to collapse
There isn't any good or bad, nor better in these, IMO. As long as some method works it has done its job perfectly.
Yeah, many times LG is in a league of its own, in many ways...
noidodroid said:
Thanks. I will take a look. Almost seems like everything I am doing is too much.
Click to expand...
Click to collapse
Really? Some detailed in here might beat your doing-too- much easily...
Search - LG Tribute Blog
CXZa said:
Really? Some detailed in here might beat your doing-too- much easily...
Search - LG Tribute Blog
Click to expand...
Click to collapse
Thanks buddy. I will check that out. Never heard of the site until now.