[Guide] Google Now: Setup and Usage Tips - HTC One X

I’ve noticed that in most development threads there are users complaining about not being able to get Google Now working correctly. I thought I’d share the steps I’ve taken to setup Google Now, and it’s been working perfectly for me.
Before we begin there are two things to clear up. Firstly, in order for Google Now to work properly you are going to need to be OK with easing off on several privacy settings. You will need to enable Web History and Location Sharing; so if you are uncomfortable with this or are a bit of a privacy nut (nothing wrong with that!) then Google Now is not for you, and will never work as intended.
Secondly, Google Now takes time to gather information about you before it will start working as you expect. This means you need to use it! Anytime you are doing a Google search from your phone, use Google Now; when you’re waiting for a bus, open Google Now, etc. After a few hours/days (depending on how much you use it) it will begin to display your Now Cards correctly.
Prerequisites:
1.A Jelly Bean custom ROM (e.g. TeamNDVRu CM10)
2.Google Now enabled (obviously)
3.Google Maps installed
4.At present Google Now will only work correctly when using English as the default language (US/UK both work)
Before using Google Now
Enable Web History:
1.We need to enable ‘Web History’ for our Google searches. From your desktop/laptop go to your Google Account settings (click your username/email address on the Google homepage and go to Account).
2.Select ‘Products’ then scroll down and select ‘Web History’. Ensure this is enabled, if paused click ‘Resume’. Web History is now enabled
Enable Location Sharing:
1.Open Latitude (found in your app drawer). Go to settings.
2.Make sure ‘Location Reporting’ is set to ‘Your location is reported automatically’
3.Make sure ‘Enable Location History’ is ticked. You can set the ‘Check In’ options as you wish, I don’t use this feature myself.
4.Open Google Maps. You should see your Latitude location centred on the screen. Click your avatar (the square pic pointing out your location). Select your name. Select ‘Location Settings from the pop-up menu.
5.Press the menu key and select ‘Change home location’ – enter your home address. Then press the menu key again and select ‘Change work location’ – enter your work location (this can also be your School/University if you want)
6.Location Sharing is now set up for Google Now
Google Now Setup:
1.Open Google Now and follow the on-screen instructions. Select ‘Yes I’m in’ when prompted.
2.Press the menu key, select ‘Settings’
3.Select ‘Now Cards’ – you can set this up as you wish, depending on what features you want to use and how you want to use them. It’s pretty self explanatory.
4.Go back and select ‘Voice’. Set language to ‘English UK’ or ‘English US’ (At present only English as default will work).
5.Select ‘Download offline speech recognition’. Go to the download tab and download ‘English UK’ language if you want to use it (US is default). – it’s a small download
6.Go back and select ‘Privacy and accounts’. Make sure ‘Location and Google Search’ + ‘Show recent searches’ + Search on google.com’ are all ticked.
7.Go back and select ‘Phone search’ – set this as you wish, if you don’t want Google Now to search your contacts for instance, then un-tick it.
8.Google Now is now setup properly, start using it!
Notes/Tips
-If you use Google Apps for Business you will need to perform an extra step. Login and go to Settings, scroll down and select Mobile. There will be a checkbox ‘Use Google Now’, make sure this is ticked.
-To have the Calendar card work properly you will need to set times and locations for your appointments/reminders. E.g. you’re doing an early shift in work, so set your appointment location to your work address, then set the times to the shift start/end times rather than ‘All Day’. The card will popup a few hours before your shift and should bring the Traffic card along with it to tell you how long it might take you t o travel/when to leave to arrive on time.
-Depending on where you live the Public Transport card may not behave as you would expect. In the area of London I live for instance, the Now Card will only show when I’m near major stations/bus stops and will not show for every single one. This may vary around the world, or even in different areas of the same city.
-Some Now Cards may never show, they are all situational (you can set the Weather to always show, but it’s the only one). It depends entirely on how you use Google Now. E.g. if you never search for your football teams results or fixtures, then the Sport Card is never going to show.
-When out and about, turn GPS/WiFi on to get a better fix on your location, helps with the Public Transport card especially.
Hopefully this gets some of you going with Google Now. Some of the steps may be superfluous but, again, this is just what worked for me after many frustrating hours of trying to figure it out!
To do: Add screenshots

Nice write up Man...Have you had any trouble with GNow adding unwanted sports teams to your cards? I can't seem to shake the LA Galaxy soccer club. I don't like soccer, much less the Galaxy.

Thanks for this mate, its awesome. I know this question may seem like I'm noob, which is because I am. I have had a little search but not sure if there is a way to get Google Now working on a sense rom on 4.0.4 such as ARHD?
Don't hate, just asking a noob question
Thanks

I can't read black on dark grey, there's not enough contrast. If you're going to set the font colour (please don't) to something, can you also set the background colour so there is some contrast? Cheers.

Perhaps I'm just missing something, but I followed these instructions to the letter and regardless, every time I open up the Google Now settings the top right on/off "switch" has defaulted back to off. Anybody having similar problems?

Good write up, thank you! Installed the new Maximus ROM last night, got a cool Google Now surprise this morning.
Looked up the web sites of two computer stores and a restaurant menu on my desktop computer. Then picked up my phone, and cards had popped up showing directions to the stores and restaurant, with travel time estimates and traffic updates. Pretty cool!
Good selection of sports teams on there now, I'll be stoked when they expand the service with more offerings.

Just installed the Maximus ROM too and used your guide to set mine up. This thing is something else. LOL. Very impressive

Is anyone having issues with sports fixtures displaying the wrong time zone on GN? I have a card for my team, but when I press the card and am directed to Google the fixture times are in US Eastern Time even though the team and I are in the UK

getting a removed card returned
I accidentally removed a package tracking card and can't seem to get it back. Any suggestions?

ruoppster said:
I accidentally removed a package tracking card and can't seem to get it back. Any suggestions?
Click to expand...
Click to collapse
Hi,
you probably swiped away the card, for that moment the card is gone, but somehow it will turn up once you open up Google Now again. if not, sometimes, a reboot of your phone will show up the card afterwards., at least, for me this helps! :good::cyclops:
Good luck mate!
---------- Post added at 12:20 PM ---------- Previous post was at 12:17 PM ----------
Nice thread! :good:
Just have a minor question, hope somebody can help me with that. I was wondering if Google Now needs Auto Sync been turned on permanently. It does save me alot of battery and data usage if I can leave it off. I think personally that Google will collect information anyway wih Now because I have my location settings turned on.
Can somebody tell me??
Thanks and I wil def follow this Thread!

My tip is to disable the useless POS. All it does is rinse your battery with constant wakelocks!
Until they improve it and make it vaguely useful it will be switched off.

And ppl like me,who can't change language to English US or UK ... What we to do?! ^^
Sent from my HTC One X using xda app-developers app

Markoleti said:
And ppl like me,who can't change language to English US or UK ... What we to do?! ^^
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Download more locale 2 from the play store and change the system language to either US or UK. I'm on 044 (Asia) and for me it works flawlessly.
Sent from my HTC One X using Tapatalk 2

Using the Google APP
Does it work using the chrome browser?? every time I try and search through the google app on the app page it tells me it cant display search results and then downloads something called search.bin???
Help please??? Many thanks
Pietje_1985 said:
Hi,
you probably swiped away the card, for that moment the card is gone, but somehow it will turn up once you open up Google Now again. if not, sometimes, a reboot of your phone will show up the card afterwards., at least, for me this helps! :good::cyclops:
Good luck mate!
---------- Post added at 12:20 PM ---------- Previous post was at 12:17 PM ----------
Nice thread! :good:
Just have a minor question, hope somebody can help me with that. I was wondering if Google Now needs Auto Sync been turned on permanently. It does save me alot of battery and data usage if I can leave it off. I think personally that Google will collect information anyway wih Now because I have my location settings turned on.
Can somebody tell me??
Thanks and I wil def follow this Thread!
Click to expand...
Click to collapse

I don't know if I'm allowed to post this, but I wrote a MASSIVE article detailing loads of uses for Google Now.
Find it here
66 Amazing Google Now Commands

Can any one guide me how to show up the newly added cards movies, news etc?
Sent from my GT-I9082 using Tapatalk 2

Now commands problem
I have my android system in english but i have configured google now voice recognition in spanish. The problem comes when I want a command like weather, questions, etc. Voice recognition captures correctly what I said in spanish but all it does is search for that text in Google, even if it is a command. The problem is solved when I change my voice recognition to english. Also tried to set my android system in spanish along with voice recognition in spanish and commands worked.
So my question... ¿how can i have my system and voice recognition in different languages using voice commands?
Thanks

jamesjones02 said:
Does it work using the chrome browser?? every time I try and search through the google app on the app page it tells me it cant display search results and then downloads something called search.bin???
Help please??? Many thanks
Click to expand...
Click to collapse
Hi James,
sorry for my late reaction! I think it depends on if your Chrome Browser is the default browser on your device. When it is en and it's still giving you that message, I should check if it appears all the time or just when you're starting Google Now. If it does, maybe you should re install Chrome and try it again! :fingers-crossed:
Here it's working fine!
Good luck fella!
Regards,
Jeroen
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
peredo.marco said:
I have my android system in english but i have configured google now voice recognition in spanish. The problem comes when I want a command like weather, questions, etc. Voice recognition captures correctly what I said in spanish but all it does is search for that text in Google, even if it is a command. The problem is solved when I change my voice recognition to english. Also tried to set my android system in spanish along with voice recognition in spanish and commands worked.
So my question... ¿how can i have my system and voice recognition in different languages using voice commands?
Thanks
Click to expand...
Click to collapse
That's because Google Now is only configured to give you reply or a card, whenever you put the voice command in English. Other languages are not supported yet to give you a spoken answer or card. You should put everything in English and then you'll see it works. Otherwise you should wait untill they have support for voice commands in Spanish!
Good luck!
Cheerio

Hey, lately I was wondering to start use Google Now but there's one thing I'm worried about the battery usage, does it consume a lot of battery? Because I always get to 5% battery in the end of the day..

The drain comes from the constant location reports needed for GN to work properly. They cause enormous amount of wakes so yes, it drains.

Related

AppFinder on Windows Phone 7

Check out my free app in the Marketplace: AppFinder
AppFinder is the fastest way to find apps by name bar none.
Start typing the name of an app or publisher, and the search results are shown instantly.
tap one of the results to go to the marketplace page for the app.
Check it out and let me know what you think
Been using it last couple days, its a big help! Thanks!!!
I'll check it out thanks!
Thank you - it's very fast like the marketplace search should be. Good for quick looking apps if you know the name.
Are there any improvements coming? Like the Top Downloads or anything else?
appfinder feedback
thanks for the feedback - I'm on it
Great app, thanks!
BTW I can't find HTC Hub...
I think you need an HTC device for that sorry buddy
zukа said:
I think you need an HTC device for that sorry buddy
Click to expand...
Click to collapse
Yeah but some guys were able to find it...
AppFinder
Ok, v1.1 has been submitted to the app marketplace and is ready for testing - should show up in the marketplace as an update within a few days
ebadger said:
Ok, v1.1 has been submitted to the app marketplace and is ready for testing - should show up in the marketplace as an update within a few days
Click to expand...
Click to collapse
does this fix the crash where it closed and wouldn't reopen for me (even after soft reset)?
I had to uninstall, reinstall to get it working again.
I don't think so.
Although I think I know the cause. I will have to roll the fix into another update.
I think there is a small window where the downloaded data file can be corrupted if the writing to flash is interrupted. It will be simple to fix. For now, if you hit it, uninstall reinstall is the only option.
nice find. but did you know while in maketplace you can use the search button to find apps as well?
jimecm said:
nice find. but did you know while in maketplace you can use the search button to find apps as well?
Click to expand...
Click to collapse
Of course I do
AppFinder is all about making apps discoverable in the fastest way possible.
I think if you're not in the top 20 apps in the marketplace under any one of the categories, then as a developer you're invisible. AppFinder seeks to make it easier to find apps via search, and with the update, via browsing as well.
Update is in the hopper, still waiting for testing to complete...
jimecm said:
nice find. but did you know while in maketplace you can use the search button to find apps as well?
Click to expand...
Click to collapse
the annoying thing is that it searches music and video as well. i can't just search for apps alone
locales
Ok, so I just figured out I've only been indexing the en-US locale
I've updated the data to include
{ "en-US", "en-GB", "en-IE", "en-CA", "en-IN", "en-AU", "en-HK", "en-SG", "de-DE", "fr-FR", "fr-BE", "de-AT", "de-CH", "it-IT", "en-NZ", "es-ES", "es-MX" };
this change is effective immediately as it is a data update. Still waiting for the update to make it through the approval process. It seems that the holiday has slowed things down a bit
The update finally arrived
Nice new features and still very fast. But unfortunately, in my case, it wont load after the second app start (even at first start if I switch the section). I always have to deinstall/reinstall again once the app was started.
Maybe you can take a look? Feels like a caching problem or something like that. I'm using a Samsung Omnia 7 in germany - if that helps
Feature wishlist:
1. add a settings screen to edit:
a.) the number of list entries on one page (10, 20, 50) to keep the app fast enough
b.) the section on loading (and maybe you also can set this to no section just for fast look-up app search - I used the app for this before the update)
2. Maybe you can use the OS-typical "left-to-right-scrolling-loading-dots" instead of the big ones?
3. New logo if there is enough time
PrivateJoker said:
The update finally arrived
Nice new features and still very fast. But unfortunately, in my case, it wont load after the second app start (even at first start if I switch the section). I always have to deinstall/reinstall again once the app was started.
Maybe you can take a look? Feels like a caching problem or something like that. I'm using a Samsung Omnia 7 in germany - if that helps
Feature wishlist:
1. add a settings screen to edit:
a.) the number of list entries on one page (10, 20, 50) to keep the app fast enough
b.) the section on loading (and maybe you also can set this to no section just for fast look-up app search - I used the app for this before the update)
2. Maybe you can use the OS-typical "left-to-right-scrolling-loading-dots" instead of the big ones?
3. New logo if there is enough time
Click to expand...
Click to collapse
Private Joker,
Thanks for the feedback.
First - there was a bug that only impacted the German locale! I was trying to save bandwidth by truncating unnecessary leading zeros in the price and this caused an exception when the locale was set to German. I've updated the data to include the leading zeros and this fixes the problem for Germans. You will have to uninstall and reinstall though to get it to work. I am very sorry for the inconvenience, and I really appreciate you taking the time to give me your feedback even though the app was not working for you at all. I hope you will try again given that the data has been fixed.
Regarding your feedback -
I think you are right on the mark for #2 and #3
I don't understand 2b.
regarding 1a.
perf should not be impacted by the number of items that are shown -
Appfinder actually transfers the marketplace data to the device and indexes it locally. I do this because the network is really, really slow. Aside from having artists and albums mixed up with apps in the marketplace search results, I also was tired of waiting for results to load. Scrolling through the apps means waiting.
The delay at the beginning is caused by reading the marketplace data from flash and indexing it in RAM. Occasionally the loading dots will appear after launching (like the first time that you use it) because AppFinder has transfered a new data file and needs to parse it again. Instead of delaying every 10 or so apps in the list, there is one delay at the beginning (which is relatively small). Right now parsing the file takes about 4 seconds.
Perf could be greatly improve if I had access to memory mapped file APIs. Further compressing the data would help as well - The really slowest part is really reading from the flash. I can improve perf when a network update occurs by reading from the flash in the background before blocking - this would drop the update delay from ~4 seconds to ~1 second.
I could also not query as you're typing -- Waiting until the enter button has been pressed would reduce CPU load and any chunkiness - pressing search would just render the apps instantly.
Anyway, really appreciate your positive attitude and willingness to give feedback in light of what must be a frustrating experience. Please give it another try.
Thanks,
Eric

AppFinder update

AppFinder update is in the marketplace!
v1.1 includes a Hot list, New list and Best list. Apps can be filtered to show only free apps.
The apps list shows developer, price, ratings and rank. The lists show the top 1000 apps in each category making browsing hot, new and best apps simple and fast.
When selecting an app from the list, pressing back from the marketplace page will return you to where you were in the app list.
As usual, the app list is displayed nearly instantly as you type, and in the app list there is no waiting for additional results to load as you scroll through the results.
Images are NOT included - I wanted to keep the display and information access absolutely as quick as possible and have traded off loading images.
Please give it a try and let me know what you think
Very nice. Runs smooth and results are displayed quickly. Nicely done. I've rated and reviewed for you too.
Only extra thing that i'd like to see (don't know if it's possible) would be a "highest rated" list that shows apps sorted by rating highest to lowest.
The "best" apps list attempts to order by highest rated.
The main problem is that a 5 star app with 1 rating probably should not out rank a 4 star app with 20 ratings. Best apps uses an algorithm to order apps based on the star rating and rating count.
Hi ebadger,
After this update I don't get any search box. When I start the app I first see a triangle for a second, then I see the search box flash for a split sec. After that I just see a black screen with 6 blinking white dots, like if it is loading. I see the menu too, but it does not matter what ever I choose.
I'm on a Samsung Omnia 7.
Best regards
kjw
do you see anything? the dots should only show while the local data structure is being populated. This should only take a few seconds. Once this completes, you should be able to press on the flames button and see a list of apps. Is this not working?
If not, try uninstalling and reinstalling - sorry for any inconvenience - I can make this more robust to data errors. I'm wondering if perhaps the download is interrupted or corrupted.
ack!
Ok, so it turns out that the behavior of float.Parse is different with German locale.
I just booted my device with German UI language and I can repro in the debugger - luckily it can be fixed with a data update.
I have now updated the data file. Unfortunately you will have to uninstall and reinstall to make it work.
I was trimming leading 0's on prices (i.e. sending .99 instead of 0.99) float.Parse works in English but not in German. Anyway, leading zeros are back.
I'm really sorry for the inconvenience to the German users!
works better and hasn't crashed on me so I will edit my prev. ranking and give it 5 stars. Works great.
ebadger said:
ack!
..
I'm really sorry for the inconvenience to the German users!
Click to expand...
Click to collapse
First of all I did a reisntall of appfinder.
Then I tried to switch to english locale and now appfinder started to work!
But when switching back to Swedish (since I live in Sweden) locale appfinder hangs on the loading dots screen.
So there might be issues with other locales too?
Cheers
kjw
kjw said:
First of all I did a reisntall of appfinder.
Then I tried to switch to english locale and now appfinder started to work!
But when switching back to Swedish (since I live in Sweden) locale appfinder hangs on the loading dots screen.
So there might be issues with other locales too?
Cheers
kjw
Click to expand...
Click to collapse
I think so. I have also seen reports of this problem with French now as well.
I have updated the data file. Would you try uninstalling and reinstalling again and see if it's working with your locale?
ebadger said:
I think so. I have also seen reports of this problem with French now as well.
I have updated the data file. Would you try uninstalling and reinstalling again and see if it's working with your locale?
Click to expand...
Click to collapse
Uninstalled, restarted, installed. But it's a no go, sorry. Same dots...
Have you tried debugging in other locales (swedish for example)?
Cheers
Kjw
crud.
Ok, so there is definitely still an issue.
Any locale that uses the "," as a decimal seperator will cause an exception while loading.
I am converting the data to use scientific notation to work around -- the fix will be a little bit tricky. I think you'll have to switch your locale to english for the first boot - once the updated data file has been downloaded you can switch back to swedish and it should work. ugh!
Well, it looks like I definitely need to do another update to fix this particular problem.
Uninstalled, switch to english locale -> reboot, install. Now appfinder works great.
Switch to swedish locale -> reboot. Now I'm back to the loading dots in Appfinder, not working.
I don't really know what you are doing in the app that is locale dependant, but maybe it could be done in a more generic way? Like convert locale dependent data to english format, do your thing, and then convert back to current locale settings. And try to avoid converting different datatypes to text if it's not relly needed, a decimal variable is not locale dependant until converted to text... Just a thought...
Thanks for your effort, though!
Cheers
kjw,
Ok, I have been debugging in Swedish today. I have updated the data file such that it doesn't use the locale specific delimiter for floating points. I have converted the data over to use scientific notation instead. It's really a simple code fix as I can specify the locale settings to use when parsing - my mistake. I have confirmed that with the new data format (just uploaded), the steps:
1) uninstall
2) switch to English locale
3) run appfinder - wait for the dots
4) wait for the dots again
5) switch locale to Swedish forcing reboot
6) launch AppFinder
this will fix it such that it should just work with Swedish locale.
I'm sorry about the inconvenience - I'm working on an update now to fix this and other issues.
Eric
After following your steps it works in swedish locale!
Great work!
Thanks,
kjw

[NST][Home replacement] EpubBrowser [11/04/2012]

Hi,
I did up a home replacement for my Nook simple touch, thought I would share it. This is an initial release, no doubt there are bugs, incompatibilities, etc, you were warned. There are no checks for other devices at this point, NST only.
Thanks to the nook community for the noogie.img file, touch nooter, and relaunch for source code ideas and various threads regarding quick refresh and e-ink support.
Disclaimer: Now, what I am using currently is the bare minimum, I have tried quite a bit of the work in this forum and it works well, but I wasn't satisfied or 100% confident and I wanted less installed. So, I restored my nook to stock, used noogie and copied over a rooted ramdisk. That was it, no touchcolortools, nooktouchtools installed, adw minimal this or that, or button saviors. I am sure they are great programs but I don't know enough about them or have the interest/time to do research on them to want to keep them installed.
For me, the point is to keep things simple and maintain battery life. It's an e-reader not a tablet after all. I just want to read books, check email, check a website or two, get some more use out of wi-fi since I don't live in a B&N supported nation.
​To install:adb install EPubBrowser.apk
Optional:
I also installed Email.apk and set up my gmail from there, no certificates required or a million google app files and plucking a chicken on a Tuesday after jumping on your left foot crap. No offense to those who like chicken plucking.
adb install Email.apk
Done and done.
I can do up a CWM zip upon request, but last going off I have a continuous reboot after installing the latest version and if you know enough to get the Nook's CWM installed you should be able to use adb.​See attached files.
What is not working:
Since Android doesn't really know about multiple external storage locations (at least for the Nook's 2.1 and/or my knowledge of android) EPubBrowser is unable to detect when the internal storage has been remounted, there is no notification of that, just notification of external storage. So if you plug in your usb cord to the computer the list of books will be empty even when you remove it. So if you don't have an sdcard you will have to hit the back button and launch home again to refresh.
Also, B&N books are not listed, whatever is in My Files will be scanned only. That applies to internal and sdcard storage. You can still use B&N's Library to access those.
I don't have any option of uninstalling apps either. adb uninstall works fine or you can just delete files from /data/app via adb shell.
What is working:
Launch of EPubBrowser via nook's home button, without use of nooktouchtools, it duplicates how the B&N home app works.
The notification icon for resuming reading goes through the app. As long as the book was launched from EPubBrowser it can remember the last book, otherwise the main display will show up. Reason being that for whatever reason the last page read doesn't work with the B&N home screen if it's not a book bought from B&N. But if you are just using the B&N Reader app it's not a problem.
When you are prompted which home you want you can select EPubBrowser and hit default. This may not stay set and will go away the next time you reboot.
How to use:Left / right swipes to go to the next 6, previous 6 books, no indication of the current page is displayed, (e-ink and aesthetics).
Touch a book cover to launch a description of the book, swipe up and down to scroll through the description, touch the cover displayed there to start reading. Hit back button on top of screen to exit without launching a book.
To bring up the list of apps installed, swipe a clockwise circle starting at 10 O'clock. Touch an app to launch it, left or right swipe to go back to main screen.​That's it for now.
If you have any ideas for improvements, bug reports, please provide as much detail as possible, and when you have done that add some more detail.
Cheers!
Updates:
2/19/2012:
Added screensaver for last read book. (Jpeg 75%) Settings->Display->Screensavers->EPubBrowser
11/4/2012:
Added src project
Looks nice! I'll give it a shot later when my Nook's charged.
Thank you for making and sharing, i am going to try tomorrow and tell you,
Improvements
First of all, thank you for creating this cool launch screen. I love the simplicity of it. Here are is brief list of improvement that you can perhaps easily implement.
-When on the homescreen with the covers of all the books, I am not sure if I am suppose to scroll down or to the right to view the rest of my books.
-When on the page with the details from the book, there is no back button to take you back to the homescreen. I end up using the button savior back button.
-The circle gesture that takes you to the apps does not feel very responsive to me.
Anyhow, great job. Can't wait to see how you plan on improving it
OW MY EYES
I installed this, and everything just kept flashing. GO Locker and GO Launcher are both broken, and the only way I could fix it was by getting into ADW and closing the task. Did I install it incorrectly? I put it onto an SD card and used ES File Manager to install it.
ChunC said:
First of all, thank you for creating this cool launch screen. I love the simplicity of it. Here are is brief list of improvement that you can perhaps easily implement.
-When on the homescreen with the covers of all the books, I am not sure if I am suppose to scroll down or to the right to view the rest of my books.
-When on the page with the details from the book, there is no back button to take you back to the homescreen. I end up using the button savior back button.
-The circle gesture that takes you to the apps does not feel very responsive to me.
Anyhow, great job. Can't wait to see how you plan on improving it
Click to expand...
Click to collapse
Hi,
Thanks for the feedback.
You swipe left to go to the previous page of books. You swipe right to go to the next page of books, assuming you have more than 6 books. Personally, I know what books I have on the device so it's not a problem knowing how many are left to see for me.
The back button should be on top of the screen in the middle, not sure why it wouldn't be there on yours. I will give it a think, maybe remove the scroll control in the book description and just use gesture detection and scroll the text via code.
Responsiveness and speed will likely improve over time, I am using the gesture library, maybe there are some optimizations there I can do.
Cheers!
Googie2149 said:
OW MY EYES
I installed this, and everything just kept flashing. GO Locker and GO Launcher are both broken, and the only way I could fix it was by getting into ADW and closing the task. Did I install it incorrectly? I put it onto an SD card and used ES File Manager to install it.
Click to expand...
Click to collapse
Hi,
Noted, so it doesn't work with GO Lancher/Locker. Never tried GO stuff, so that wasn't tested. It was tested with ADW and relaunch, and I had all the rest of your typical touch nooter install there without problems, android market, etc.
I have run it with Home.apk renamed to Home.apk.bak and that works fine as well.
As for your other question, if it is installed it is installed, there are no configurations to modify, however you get it there it should be fine.
Cheers!
WANT
Noted that it does not work with go, will have to get rid of that first.
From the screenshots, I can already tell you put time into polishing! Good job!
NFHimself said:
Hi,
Noted, so it doesn't work with GO Lancher/Locker. Never tried GO stuff, so that wasn't tested. It was tested with ADW and relaunch, and I had all the rest of your typical touch nooter install there without problems, android market, etc.
I have run it with Home.apk renamed to Home.apk.bak and that works fine as well.
As for your other question, if it is installed it is installed, there are no configurations to modify, however you get it there it should be fine.
Cheers!
Click to expand...
Click to collapse
I'll try it again without the GO software, but it was making everything just keep flashing, like the lock screen.
@NFHimself, any plans for taking this to github? It is very close to what I always wanted but I was also looking for:
- some kind of usage of Calibre data
- library filtering for series, highly rated, etc.
- tracking of books that are clicked to maintain sort of recent read filter
- sorting options by rating, series, and other Calibre properties
- option to display 6 or 12 (smaller) book covers.
I hope it already does use intents for selecting a different epub reader for those who have no defaults and multiple ones installed.
I know its a long list, and I have some Android experience. I am sure there would be other developers here so a combined effort might help.
Screenshots looks good, but on the Nook - only flashing screen like Googie2149 said
tazzix said:
@NFHimself, any plans for taking this to github? It is very close to what I always wanted but I was also looking for:
- some kind of usage of Calibre data
- library filtering for series, highly rated, etc.
- tracking of books that are clicked to maintain sort of recent read filter
- sorting options by rating, series, and other Calibre properties
- option to display 6 or 12 (smaller) book covers.
I hope it already does use intents for selecting a different epub reader for those who have no defaults and multiple ones installed.
I know its a long list, and I have some Android experience. I am sure there would be other developers here so a combined effort might help.
Click to expand...
Click to collapse
Hi,
I use Calibre as well, I just connect via adb and calibre picks up the nook and I copy books over and it converts on the fly, cool program. Using Calibre data is an idea worth looking into, if I can fit it into the theme of no preferences, no extra buttons or config. There are plenty of those kind of home apps already. Relaunch for one is great, just missing a graphical front end, I was going to mod that, but decided that I didn't really need so much stuff and I wanted to learn more android API.
I did up the app using pretty straight forward epub standards (note the plural), it works with most epubs I have run across, not sure if looking for extra xml is a good functionality vs performance tradeoff. I haven't been using EPubBrowser for very long myself, so when I add more books and find something annoying I will probably make changes to fix it. I want to keep things simple, if I need a preferences menu, it is already going the wrong way.
I am not specifying any class, just a regular launch this epub file intent, so it should work with any reader. I like the stock reader myself, cool reader seems to dislike some epubs I have above a certain size, and I didn't want to deal with it.
I may github it, I am kinda time limited these days.
Cheers!
AgentSlash said:
Screenshots looks good, but on the Nook - only flashing screen like Googie2149 said
Click to expand...
Click to collapse
Hi,
More details are needed to figure that out. What device do you have? What do you have installed on it?
Cheers!
I just wiped then manually rooted my Nook, and this works now. Although I'm having some trouble with getting to the apps page after the first time I did it. Could you possible change how you get to the apps page? Maybe change it so you have to click the menu key to get to apps.
Edit: Now that I've added my books, it shows me two books, one empty, and another book. Now it just flashes and removes/re-adds the last book. :/
Edit 2: I found that there are a few books that just don't like this launcher and cause the entire Nook to start flashing. I've been adding my books one by one to see which work and which don't and I'll try and find similarities between those that don't.
Great launcher replacement.
Running right now, but after the second page, I get sent back to the first, regardless of left-to-right or right-to-left swiping. Ideas?
Also, any chance for a page up/down use for scrolling through books?
I took a quick vid. It looks like when I swipe again from R to L, it tries to redraw the next books, but gets confused?
http://youtu.be/K1ukWFK0syg
ace7196 said:
Great launcher replacement.
Running right now, but after the second page, I get sent back to the first, regardless of left-to-right or right-to-left swiping. Ideas?
Also, any chance for a page up/down use for scrolling through books?
I took a quick vid. It looks like when I swipe again from R to L, it tries to redraw the next books, but gets confused?
http://youtu.be/K1ukWFK0syg
Click to expand...
Click to collapse
Hi,
I'm busy painting the baby's room, but it looks like it is resetting, perhaps one of your books is crashing the app and it is being relaunched as the home screen. Or could be some other bug, how many books are involved, if you remove one or add one, does it go away?
If someone could open the e-pub (it's a zip file) that causes the error and paste the contents of the .odf file (it's an xml file) , that would help.
Cheers!
NFHimself said:
Hi,
I'm busy painting the baby's room, but it looks like it is resetting, perhaps one of your books is crashing the app and it is being relaunched as the home screen. Or could be some other bug, how many books are involved, if you remove one or add one, does it go away?
If someone could open the e-pub (it's a zip file) that causes the error and paste the contents of the .odf file (it's an xml file) , that would help.
Cheers!
Click to expand...
Click to collapse
I've gone through and removed / added ebooks, and still the same problem.
Sorry, been kinda busy.
I need to be able to see the bug on my end to work on it. Maybe I've been lucky with the book selections I have made or converting using Calibre has set them all to have the same kind of format, vs the variety you might see in the wild from multiple sources.
Does the error happen with no books?
What happens when you have just one book?
How many books do you have on your nook? (If it's something like 1000 then yeah, maybe you'd have issues, no checks in the code for being out of memory.)
What firmware are you using?
Are there any hardware differences? (Can't imagine that being a problem, but I am using a NST, not the original Nook.)
What can I do to reproduce this error on my end? What are the steps?
Cheers!
NFHimself said:
Sorry, been kinda busy.
I need to be able to see the bug on my end to work on it. Maybe I've been lucky with the book selections I have made or converting using Calibre has set them all to have the same kind of format, vs the variety you might see in the wild from multiple sources.
Does the error happen with no books?
What happens when you have just one book?
How many books do you have on your nook? (If it's something like 1000 then yeah, maybe you'd have issues, no checks in the code for being out of memory.)
What firmware are you using?
Are there any hardware differences? (Can't imagine that being a problem, but I am using a NST, not the original Nook.)
What can I do to reproduce this error on my end? What are the steps?
Cheers!
Click to expand...
Click to collapse
For me, it doesn't matter how many books I have, it's just a few specific books that crash, independent of the other books in my library, and some books are more severe than others (one makes the entire Nook start flashing (all software), others make only this app flash).
I have the same problem as the people above but I can't get past the first page. I can't seem to narrow it down to a certain book making it crash. It's a shame I love this home screen, but hopefully we can get this fixed and running great.

[Q] Question on [ROM][Cool Sense][5 April]Cool Droid v3|2.3.4|FASTEST|Data++/Stock

First of all I want to thank everybody whos making efforts so that our beloved Desire survive through out these years!!
I am a Desire owner for more than three years and I could say that I have tried nearly anything on my device.
Currently I am using this Rom with the exactly configuration written by the user.
As the user Tonyp has written in the post, that exact setup is working really good and without any major issues. I have only 3 spots that i would like to point out:
1st When I am call directly from the address book a contact that is stored without the national prefix (+30 Greece) the phone adds automatically the prefix +1 (maybe US I don't really know), so this make the call goes wrong.
2nd From Optimo Settings (included in the Rom) I don't have the choise to dissapear the battery icon and leavy only the numbers.
3rd As it already pointed out, in the Rosie Options, the right button choise for the shortcut isn't working if you select anything else bit the internet browser.
I would really like to hear your thoughts about the things that i've pointed out before, and again to thank everyone that is contributing to the development of our device!!
As an addition to the previous post I have found out that some appz that they use the google account to log in such as youtube and quicktime, they sign in feature doesn't work, although I have install the latest google play services and the syncing of the google account works fine.
Thanks in advance and please if some wants to copy my 2 posts to the development thread, be my guest!!!

New Way to Bypass LG - Google Factory Reset Protetion on VARIOUS Devices!!

New Way to Bypass LG - Google Factory Reset Protection on VARIOUS Devices!
Ignore the poor grammar, typos etc.. Bits and pieces from notes.
--needed--
bluetooth (needed)
data cable (needed)
computer (needed)
Factory reset phone, forward through setup wizard and turn on wifi then... --->
enable service menu with tool - so youll need to select the modem port then on the app goto "open port lg" then after this goto option "open hidden menu" now you are in the hidden menu. --->
goto - on hidden menu .. field test -> gps test -> gnss test or gns pos test -> now youll see a warning screen hit ok. youll now be in location within settings ---->
turn on -> google location history at bottom click it -> top right 3 dots click then view/manage which brings you out to maps.. now hit back button and you will be in maps now.
-
online way - online way into the removal process
offline way - offline way around and into the removal process
-online way -> Hit top left 3 bars and then start driving and set destinations to KFC for example, start driving then press the mic at top right and say "settings"
[Online] In settings goto Apps -> disable and force stop if you want, google play services, both setup wizards, google account manager, and google services framework and also clear data for each also if you want
Next reboot, and when phone opens up to setup wizard use your bluetooth and say open google or just press it and on the google screen when it pops up search for example gmail then scroll down through the results until you see a big gmail icon and 3 dots to the left.. hit these and share.. it might also look like a share icon instead then share to msgs ... put in a random number and some txt, attach your location by hitting the paperclip. make sure to send it (doesnt actuially go through unless youve active service card in..)
Click on the location link and click connect and it will open up maps, start a route, start driving then push the microphone and say open settings. When settings opens up goto Security and enable unknwon sources.. press bluetooth again and say open google or toggle back to the google search screen (bluetooth is your best bet as UI will crash sometimes and put you back at the setup wizard)
When google opens click on the G at top left then search for example "frp video youtube" for example.. scroll down results until you see a youtube site link and click on it. This *should* open up youtube once it opens up top right click and goto about and this will open chrome ..now search in google this http://google.com
download these: (your typical stuff for example "vnrom_frp, gam_6.0, apex launcher (or any other launcher... id suggeat older versions as newer can reset your order and land you back at the setup wizard) .
[Offline] Hit 3 left lines at top and then go down to offline areas and youll see offline areas settings then click on settings under "to save your cellular data while using google maps" click top right 3 dots and click show tab view now all the settings sections are back
Turn on bluetooth and pair ear piece incase you mess up and need to get back to zomewhere
Follow through as you would online version.
Let me know if you find the AT commands!
Credits for app attached in next post goto those Yemen Fellas who have so far been able to bypass anything in front of them LG/Samsung Carrier - Sprint!! Tracfone --> FRP/Unlock
Credits also to XDA user @CXZa as if it weren't for him i probably would not have looked deeper into AT commands (still have barely scratched the surface).
almost forgot... here is the app to use in the steps leading into the OS for factory reset bypass.
Tap this and that.. These are kind of fun - sometimes. Sometimes quite complicated.
This one is for LG m250f 2017. Should work for mine too, m250n.
(Two seconds wasted...)
Not long ago I accidentally removed my Google account when testing vold triggers.
Simply by doing
setprop vold.decrypt trigger_shutdown_framework
and
setprop vold.decrypt trigger_restart_min_framework
did the trick. Other accounts are kept and no resets, etc... only but is that you have to have a root access...
The min framework was totally empty of icons, didn't ask for the pin.
I don't how the trick works on other devices. It was a LG...
To restart normally after it.
setprop vold.decrypt trigger_reset_main
setprop vold.decrypt trigger_restart_framework
Thanks. I will take a look. Almost seems like everything I am doing is too much. These LG devices are a tad bit more difficult in areas i guess you could say.
also.. hope you ignored all the other b#ll**** I had in the removal guide ha.. simply my personal notes.
noidodroid said:
Thanks. I will take a look. Almost seems like everything I am doing is too much. These LG devices are a tad bit more difficult in areas i guess you could say.
also.. hope you ignored all the other b#ll**** I had in the removal guide ha.. simply my personal notes.
Click to expand...
Click to collapse
There isn't any good or bad, nor better in these, IMO. As long as some method works it has done its job perfectly.
Yeah, many times LG is in a league of its own, in many ways...
noidodroid said:
Thanks. I will take a look. Almost seems like everything I am doing is too much.
Click to expand...
Click to collapse
Really? Some detailed in here might beat your doing-too- much easily...
Search - LG Tribute Blog
CXZa said:
Really? Some detailed in here might beat your doing-too- much easily...
Search - LG Tribute Blog
Click to expand...
Click to collapse
Thanks buddy. I will check that out. Never heard of the site until now.

Categories

Resources