Intermittent Keyboard problem on Tilt2 - Touch Pro2, Tilt 2 Windows Mobile General

I did a quick search of this forum and only saw this issue brought up once before (not answered, and dif version of this handset), so I will put it out there again.
Occasionally after I get an SMS, or send one, I will open up the keyboard but I get no response. It will light up if it is dark. The handset recognizes it is being opened (switches to landscape), but the keys do nothing. I am able to open up the software keyboard and continue whatever I am doing, but nothing on the hardware one. I usually will finish my texting, and move on to other things, and when I check later, it works fine...as if nothing was ever wrong. No soft reset, or anything... This has happened several times, but I will go weeks without it happening.
Oh yeah...I am using the stock ROM for the tilt 2.

have you applied the hotfix already?

I was not aware of any hotfix for this. I did a quick search and found nothing. Can you please point me in the right direction and I will look into this...

I'm having the same problem with my Tilt 2. Factory ROM, and I have applied the hot-fix. And yesterday I preformed a hard rest. Its still does it. The keyboard will partially stop working at times.
I get the same response, with the keyboard out the phone switches to landscape, the hot keys work (contacts, Internet, home, etc.), but it wont type letters or numbers. Sometimes after going into sleep mode it will work latter, but usually I have to soft rest. This is happing several times a day. Quite annoying!

Starman_thc said:
I was not aware of any hotfix for this. I did a quick search and found nothing. Can you please point me in the right direction and I will look into this...
Click to expand...
Click to collapse
http://www.htc.com/us/support/tilt-2-att/downloads/

princeasi said:
http://www.htc.com/us/support/tilt-2-att/downloads/
Click to expand...
Click to collapse
I dont think that this applies to the 6.5 rom, I have tried to install this and it wont. I think this was discussed awhile back about this hotfix.

I followed the above link, however, I did not see a hotfix that fits what I am experiencing unless "freezing in SMS" is what you guys are thinking. I did not interpret my symptom as 'freezing' as I am fully able to use the screen...just not with the hardware keyboard.
Never-the-less, I have no problem installing the hotfixes. I am not clear on whether or not they apply to my version, however, they are dated after my purchase, so I am thinking that they should be OK.
Oh yeah...where would the discussion be regarding whether or not this applies to me...I was unable to find it...

Same issue for me, flaky hardware keyboard. I'm running the AT&T stock ROM, and I put the hot-fixes on immediately after they came out.

The issue is with the Stock ATT ROM. I am the chef of the e2 ROM series here and my ROMs are customized for AT&T. With my custom ROMs I have no issues with the keyboard at all. This is because most of the packages were updated. So if you want to fix your keyboard, you'll need to flash a new ROM. If you want/need a customized ROM for ATT then check out the e2 ROM series in the ROM Development thread.

Thank you for the info/invite. I will certaintly check out your ROMs. I have been reluctant to flash this phone as I can't afford a replacement if things go bad (not to mention the hassle of reinstalling/re-setting things up)...

Related

Help My Camera Doesnt Work Anymore...

Think the camera on my 8525 was working fine lastly before i downgraded my Radio to 1.40...I have tried updating firmware n number of times still the camera wont work...Hardreset softreset nothing is bringing the camera back...tried 3rd partycam tools and it launches and disappears in a sec... searched the forum and looks like im the only one...
Anyone have any suggestions ? do you think i burnt my camera or something?I do have an option to get it sent back..but wanted to see if someones suggestion here helps fix it so others can learn from me...
It was on black 3.01 when it was last working and tried everyones roms after it didnt work..
thap143 said:
Think the camera on my 8525 was working fine lastly before i downgraded my Radio to 1.40...I have tried updating firmware n number of times still the camera wont work...Hardreset softreset nothing is bringing the camera back...tried 3rd partycam tools and it launches and disappears in a sec... searched the forum and looks like im the only one...
Anyone have any suggestions ? do you think i burnt my camera or something?I do have an option to get it sent back..but wanted to see if someones suggestion here helps fix it so others can learn from me...
It was on black 3.01 when it was last working and tried everyones roms after it didnt work..
Click to expand...
Click to collapse
Ok its fixed now... Dont know what fixed it... maybe the constant upgrade of roms or the ppcreset... or pulling the battery out and leaving it for 10 mins... But finally i dont have to send it in for a refurb... Thanks for anyone who looked and thought of a solution... If anyone else has this again they can try all the things i tried...
1) Upgrade/ Downgrade Radio multiple times.
2) upgrade SPL multiple times.
3) Try all the cooked roms
4) Revert back to ATT wm5 rom.
5) Reset device with Reset PPC
6) SuspendPPC (These i found in the black rom under system Folder)
7) Pull the battery out for 10 Mins.
Hopefully something in this combo works... cant point out which since i did too many things...
This forum is great with info available here Thanks to all the chefs,the guides and WIKI.
Cheers...
Disappearing Camera? Me Too.
My Camera Disappeared a few days ago, the hardware button on the spine does not bring it up and the application does not run, it just brings up the photo viewer. I even run the exe and get nothing. Also note, "Brighter Screen" does not work nor "Bigger Screen". For the record it's a Hermes100 and its running ROM Pro BLACK 3.0.1 and Radio 1.41.00.10.
I am looking all over, but I can't find anyone with the proper solution. May I should take my Cingular 8525 back and see what they say, they are probably going to say it was my fault when they see the new radio and Rom, but the problem happened with the original ROM.
ggreci said:
My Camera Disappeared a few days ago, the hardware button on the spine does not bring it up and the application does not run, it just brings up the photo viewer. I even run the exe and get nothing. Also note, "Brighter Screen" does not work nor "Bigger Screen". For the record it's a Hermes100 and its running ROM Pro BLACK 3.0.1 and Radio 1.41.00.10.
I am looking all over, but I can't find anyone with the proper solution. May I should take my Cingular 8525 back and see what they say, they are probably going to say it was my fault when they see the new radio and Rom, but the problem happened with the original ROM.
Click to expand...
Click to collapse
Did you do everything i mentioned above?
try different combinations. I had the exact same rom and radio as you...
when i downgraded the radio it took the camera out for some reason.
If i were you i will try different things before the last option of sending it back for a refurb.
Good luck

Button Tester?

hey guys,
my green answer call button doesnt seem to work. i'm wondering if its the rom or the phone. it still lights up but doesnt respond when i push the button.
any suggestions like a button tester program?
kind regards,
jason
Are you having any problems with any other keys?
If its just the one you can break your phone down and check your connections and see if anythings loose or damaged. Make sure to go to the Wiki and check out the guide on how to properly take your phone apart.
everything works except for that the green phone button
Starting to wonder about malfunctioning buttons posts
I myself posted a thread on my malfunctioning power button . I am getting the feeling that certain apps and tweaks are causing some of these malfunctioning hardware buttons to happen. Not exactly a scientific point of view, but I think lots of this button malfunctioning (no matter which one), can eventually be resolved by HR or as mentioned in another post, Clear Storage. I myself, within a minute, pulled out my SDMicro card out for 15 seconds, took off Quickmark application (last app or cab put on my system), and my power button turns on/off as it should. I had to resort to SR's when I had my problem..........................
Latest: Found out that my main problem was NOT any of the above,, it all seemed to occur because of a buildup of Notification Queue's,, so check that out... I think that those queue's can be a source of a lot of problems
cheers for that suggestion.
softreset doest fix it so i will have to resort to hard reseting.
lucky the vodaphone version has the 3G phone button and i can use that to get to the dial pad but it then assumes my calls are 3G which are annoying
has anyone got any suggestions then?
i flashed K's new rom and still my 'Green Answer Phone' button doesnt work.
thanks in advance for any help
jason
jasonchiu said:
has anyone got any suggestions then?
i flashed K's new rom and still my 'Green Answer Phone' button doesnt work.
thanks in advance for any help
jason
Click to expand...
Click to collapse
i had a similiar problem when installing a different dialer via cab.
i would suggest to either install a naked rom (like pandora naked) or one of the older roms (like schaps v3.x).
do not install any other cabs and see if the green button is working.
i flashed pandora naked rom and it still doesnt work.
any one have any other suggestions?
if not will i have to take the phone apart :S?
the Irda doesn't work at all, when i install a program to use my tytn as a remote for my tv, and i try to clone my remote i get an error saying "Irda port being used by another application"
and it wont communicate with over devices via Irda. other than that it works great...does anybody know a way to fix this problem?
p.s. tried other roms, Irda works fine, so it's not the phone.
please help this lost soul!!
thanks!
sorry, posted in wrong area! rookie mistake! forget about it!
A general rule I follow is not to use too many .cabs as certain apps and tweaks can cause some of these malfunctionings to happen.
You cant be installing cabs for everything on your phone. Do you really have so much space in your phone?
hey guys i thought this was a thread about getting my green answer call button working again!
seem like more of a hardware problem to me. you can still try checking for bad blocks, flashing another radio, but that all may be futile. look up the disassembly guides in the wiki. mikechannon also has some stuff on that, if u click on his sig

HELP! Phone doesn't wake up

My phone goes to sleep
and does NOT wake up, the bottom row of buttons and keyboard both light up if I open them or press them.
Help please!
rossle12 said:
My phone goes to sleep
and does NOT wake up, the bottom row of buttons and keyboard both light up if I open them or press them.
Help please!
Click to expand...
Click to collapse
Stock ROM or custom? Any overclocking?
The phone powers up if you soft reset, correct?
Well, I found out it was a small problem with the rom.
It was a custom rom, and I just installed a different one and it works flawlessly.
With the other one, the light sensor did not work either.
Also, I dropped my phone the other day, and a really small spring fell out.
And the back plain on my screen is loose and opens up easily..
Which ROM?
I hate to hijack this thread but i am having the exact same problem. Basically when i put my phone to sleep its hit or mess as to if it will wake. It seems to have started when i flashed Energy ROM. It was terrible after that, so I switched back to the stock ROM available from the HTC website and all seemed well at first. Now its back to hit or miss.
I cant really rule out a hardware issue such as a broken sensor or something because I'm not sure how the mechanics of it work. When i push the power button on top the phone wakes but not the screen I know this because the 4 lights on the bottom light up and the keyboard as well. I can hit the button repeatedly but it doesnt help. At other times it works flawlessly, but usually does not.
Can anyone give me a suggestion as to what it could be, or a way to rule out a hardware issue?
Exactly my problem!
It was perfectly fine for the first day or so before it started crapping out again..
Can someone please help us with this problem?
It's mind consuming and it's making me worry.
Until TP3 is out, I won't get a new phone ):
Well, the problem is discussed in great detail on the internet, but no one can give a definitive answer. ..
I've been a touch pro 2 user for exactly 3 days... My new HD2 from T-Mobile is in the mail... This is a un acceptable flaw with no real solutiion... Good Luck TP2 users....
Good luck to you.
I've had mine for over two years and it was flawless
Just one recent drop determined everything
Although I Must say, it was one hell of a durable phone
Yea, dont get me wrong. I really like the phone. Thats why I'm getting the HD2. Great OS and big beautiful screen. I'm gonna miss the slide out keyboard but I think thats what breaks these phones.
I'm excited that there's the possibility of running Windows Mobile 7 on it.
rossle12 said:
Can someone please help us with this problem?
Click to expand...
Click to collapse
I'd like to try to help. But you never answered my question of what ROM you are on (and which one you tried previously).
I've determined my problem is 100% hardware related. If I open my keyboard and then grab the screen and tweak it while pressing the power button it comes onn 100% of the time. Sux, but at least I know the cause now
djowen6565 said:
I've determined my problem is 100% hardware related. If I open my keyboard and then grab the screen and tweak it while pressing the power button it comes onn 100% of the time. Sux, but at least I know the cause now
Click to expand...
Click to collapse
Every once in a while my phone would turn on and I wouldn't know why
But yeah, I think it is hardware related.
I previously used Energy then went to Jacko's.
Both were perfectly fine, just the upsetting sleep function and light sensor would keep the phone off.
HELP: Same problem Phone not waking up
Hi saw this thread and was wondering if anyone can help me.
I have an HTC Touch Pro 2 for some month now...
Using the following details:
OS Version: 5.2.21887 (21887.5.0.86)
ROM Version: 2.07..401.1 (80303) WWE
ROM date: 02/04/10
Radio ver: 4.49.25.91
stock ROM basically...
THe issue is that the phone doesn't wake or when using it just freezes/hangs.
Not much software/apps installed... and memory is good as well.
I just don't know what's going on...
Help please.
Thanks
rossle12 said:
Every once in a while my phone would turn on and I wouldn't know why
But yeah, I think it is hardware related.
I previously used Energy then went to Jacko's.
Both were perfectly fine, just the upsetting sleep function and light sensor would keep the phone off.
Click to expand...
Click to collapse
I'd agree with the notion that its likely hardware related. I've flashed maybe 10 different builds of Energy over the last 7 months or so, and never once had and issue with the SOD (sleep of death) that I can recall. A bad flash can sometimes happen. But since you flashed another reputable ROM (Jackos), that somewhat eliminates the possibility that a bad flash is the culprit.
You can start from scratch, by running Task29 to format the ROM area of the phone's memory, and reflash the ROM. But this would be just to eliminate the possibility of a bad ROM flash. My gut says that you won't see any different results.
Running the phone "clean" for a while (to see if you still have the SOD) without any software installed or any other modifications will eliminate the possibility that any software or mods are responsible for the issue.
are you sure its hardware related? because my phone started doing this yesterday too...I had an energy rom from october, and it was really buggy. I am only able to keep my phone from sleeping when it is plugged in to some power, so i flashed the newest energy rom and still having the same problem...wont wake up from sleep
EDIT:
I dont see how this can be hardware related because everytime i soft-reset, the screen works again. this problem only happens when the device goes to sleep...
Any overclocking?
As I already mentioned, I never had any SODs on Energy that I can recall, except when using OCT (OverClocking Tool).
I have done no overclocking...I just flashed the newest energy rom like 15min ago...is there anything else I can do or check? it looks like the phone works still, just no backlight...
After flashing the ROM, maybe try running it "clean" for a day or two, don't install any software or do any mods, reg edits, etc. If you still have problems with the phone waking up with a new ROM, and no other software or other mods, than it may indicate a hardware problem.
And be sure to run Task29 before you flash the new ROM, if you don't already do that.
You guys should read the following thread:
http://forum.xda-developers.com/showthread.php?t=648134
You're not the only ones (by any means) with the SOD issue. But it isn't at all clear what causes the issue. Lots of different theories in that thread about various software or ROMs, with no clear solution.
Lots of conflicting info, but some comments on the thread suggest (as I mentioned) that Task29 may help (certainly can't hurt).
moto2000 said:
are you sure its hardware related?
Click to expand...
Click to collapse
Nope, definitely not sure, especially after reading the thread linked above. But as I suggested before, Task 29, try a different ROM, and run it clean with no software or mods, and start eliminating the variables.

issues with the at&t ics for captivate glide

so i'd like to collect the issues (and solutions) for the captivate glide's new official android upgrade (ice cream sandwich).
we all know about the keyboard backlight issue,but its already solved (thanks for it to the devs), moreover we have an opportunity for rooting, as well.
Apart from that I experienced that after a few seconds of black screen, "com.android.phone stops" after I receive or make phone calls. That is also can be solved by making a factory reset.
But I have a problem I couldnt solve yet: screenshot/screencapture. On gingerbread you had to hold home button while pressing the lock key. On ICS it doesnt work. I read that on ICS you should press volume down and lock key at the same time, but that doesnt work for me either. Do you know a solution for this?
I've got one more problem, but I'm not sure if its a fault of the ROM: on the stock web browser,everything works fine, but on google chrome, I cannot use virtual keyboard,nor copy/paste functions.
Thanks for your help
soadzoor said:
so i'd like to collect the issues (and solutions) for the captivate glide's new official android upgrade (ice cream sandwich).
we all know about the keyboard backlight issue,but its already solved (thanks for it to the devs), moreover we have an opportunity for rooting, as well.
Apart from that I experienced that after a few seconds of black screen, "com.android.phone stops" after I receive or make phone calls. That is also can be solved by making a factory reset.
But I have a problem I couldnt solve yet: screenshot/screencapture. On gingerbread you had to hold home button while pressing the lock key. On ICS it doesnt work. I read that on ICS you should press volume down and lock key at the same time, but that doesnt work for me either. Do you know a solution for this?
I've got one more problem, but I'm not sure if its a fault of the ROM: on the stock web browser,everything works fine, but on google chrome, I cannot use virtual keyboard,nor copy/paste functions.
Thanks for your help
Click to expand...
Click to collapse
Press and hold Power + Home button together for a screenshot.
Keyboard works fine for me on Chrome, as well as copy/paste. But mine can be a different scenario as i'm running NardROM with the LH2 kernel.
ninthsense said:
Press and hold Power + Home button together for a screenshot.
Keyboard works fine for me on Chrome, as well as copy/paste. But mine can be a different scenario as i'm running NardROM with the LH2 kernel.
Click to expand...
Click to collapse
Thanks a bunch! if i press them at the same time and hold them, it just works as a charm! Im wondering why I didnt figure that out by myself.
The chrome with virtual keyboard is still no better.. anyone has a tip?
If anybody knows how to get past KIES because it never recognizes my phone, I'd love to get ICS to load.
just use this: http://forum.xda-developers.com/showthread.php?t=1841502 It's what I am using and most people were using before the Official came out. No diffidence between the 2 version practically. Make sure you have CWM then flash. Oh and as always do a nandroid backup before. It is the only way back as well.
I'll admit it... I'm a n00b that this and don't want to brick my phone. Dare I wait till Samsung / AT&T get their stuff together and get the KIES & ICS issues fixed or do I try the link dudejb suggested? A clear step by step would be appreciated (no offense intended). I'm just not too technically savvy.
If you're new to android flashing and not comfortable with something like that, I wrote up a nice newb-friendly guide here that walks you through installing the 4.0.4 leak, as well as installing ClockworkMod Recovery, fixing the keyboard backlight issue, and rooting.
I'd say go for it, you'll be waiting quite some time just to see Samsung fix the keyboard light, let alone address your issue of kies not seeing the phone.
I'd like to chime in with another problem I've noticed. With Gingerbread, the physical keyboard worked just like the on-screen one: tap shift or alt to modify the next keystroke, tap twice to lock the modifier. With ICS (the official firmware installed via Kies), however, a single tap on the physical keyboard keeps modifying keystrokes until tapped again. Has anyone else experienced this? Since I have the force-closing problem with the phone, I'm planning on doing a factory reset. Maybe that will solve my keyboard problems.
Also, I can also confirm problems with the on-screen keyboard in Chrome. All the other browsers work fine, but the keyboard just won't show up in Chrome. Combine that with the physical keyboard problems I've been having and Chrome becomes essentially unusable.
On the plus side, my battery life seems better. It used to be that I couldn't go more than eight hours without the phone dying on me, but now it's still going strong at 20-30% after eight hours.
clpo13 said:
With Gingerbread, the physical keyboard worked just like the on-screen one: tap shift or alt to modify the next keystroke, tap twice to lock the modifier. With ICS (the official firmware installed via Kies), however, a single tap on the physical keyboard keeps modifying keystrokes until tapped again. Has anyone else experienced this?
Click to expand...
Click to collapse
I'm not having that problem with the LH2 update (checked in the stock browser and text messages).
Here's my list of bugs/complaints with the LH2 official update:
1. no keyboard backlight (I know there's a fix.)
2. occasionally getting "com.android.phone has stopped" after ending a call. (I've seen at least 4 people report this problem on this forum.)
3. email app display is blank after adding a email account (solved by changing font size, then it's fixed)
4. email app doesn't remember which view you selected after closing (i.e. standard/conversation view, always defaults back to standard view)
clpo13 said:
I'd like to chime in with another problem I've noticed. With Gingerbread, the physical keyboard worked just like the on-screen one: tap shift or alt to modify the next keystroke, tap twice to lock the modifier. With ICS (the official firmware installed via Kies), however, a single tap on the physical keyboard keeps modifying keystrokes until tapped again. Has anyone else experienced this? Since I have the force-closing problem with the phone, I'm planning on doing a factory reset. Maybe that will solve my keyboard problems.
Click to expand...
Click to collapse
I can confirm the problems with the keyboard's alt and shift keys. It's a pain
My physical keyboard works just like before. I haven't looked, but I imagine this is something you can set in the Input tab in Settings?
EDIT: It's not there, sorry. I also have the CRT-Off, Custom Boot Anim and Backlight fix mods installed. Perhaps that makes a difference?
Sent from my SGH-I927 using xda app-developers app
Evil Alex said:
My physical keyboard works just like before. I haven't looked, but I imagine this is something you can set in the Input tab in Settings?
EDIT: It's not there, sorry. I also have the CRT-Off, Custom Boot Anim and Backlight fix mods installed. Perhaps that makes a difference?
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
I too had the keyboard problem. I traced it back to the keyboard app "Swiftkey3." If I use any other keyboard app (stock or not), the physical keyboard works as it should. If Swiftkey is enabled, the caps or alt keys lock on with one press. VERY annoying.
Other than that, I've experienced some txt messages coming in multiple times. Like sometimes more than 15 copies of one txt. Seems to have calmed down some since I moved from the official leak to NardROM 0.4, but I did have a txt last night come in twice. Maybe that one was on my friend's end and he actually sent it twice.
Right now, my main concern is battery consumption on NardROM 0.4. Seems a bit worse than when I was running the stock leak (rooted). Battery profile attached. I've barely used my phone today since unplugging it, yet plenty of drain. I have no idea why the phone is "awake" so much when the screen is off.
bakageta said:
If you're new to android flashing and not comfortable with something like that, I wrote up a nice newb-friendly guide here that walks you through installing the 4.0.4 leak, as well as installing ClockworkMod Recovery, fixing the keyboard backlight issue, and rooting.
I'd say go for it, you'll be waiting quite some time just to see Samsung fix the keyboard light, let alone address your issue of kies not seeing the phone.
Click to expand...
Click to collapse
I haven't tried to do anything yet because the link you supplied has in it this phrase which concerns me.... "First, make sure you have Kies installed, so that you have the correct USB drivers." I cannot connect to the phone using the latest KIES installed on my PC. Is there supposed to be KIES on my phone, because if there is, it's missing. Again, please be patient with me and thank you all for everybody's help.
clpo13 said:
With Gingerbread, the physical keyboard worked just like the on-screen one: tap shift or alt to modify the next keystroke, tap twice to lock the modifier. With ICS (the official firmware installed via Kies), however, a single tap on the physical keyboard keeps modifying keystrokes until tapped again
Click to expand...
Click to collapse
I experienced the same but I realised that it depends on the program you use. At some browsers it is the way you just described it, but with texting, and with the stock browser, everything is fine to me
bakerb316 said:
I haven't tried to do anything yet because the link you supplied has in it this phrase which concerns me.... "First, make sure you have Kies installed, so that you have the correct USB drivers." I cannot connect to the phone using the latest KIES installed on my PC. Is there supposed to be KIES on my phone, because if there is, it's missing. Again, please be patient with me and thank you all for everybody's help.
Click to expand...
Click to collapse
i have a difficult time connecting to my phone with Kies as well. Here are some steps to take that have helped me:
download the latest version of kies.
remove battery from phone for 30 seconds, then let it boot back up fully before plugging to computer (this was from samsung tech support)
uninstall kies, run ccleaner registry cleaner, reboot, reinstall kies.
download the 1.5.xx version of samsung USB drivers.
I've had to do all of those things to get Kies to see my phone.
and on a couple of computers, it just won't read it, at all.
euro1990 said:
Right now, my main concern is battery consumption on NardROM 0.4. Seems a bit worse than when I was running the stock leak (rooted). Battery profile attached. I've barely used my phone today since unplugging it, yet plenty of drain. I have no idea why the phone is "awake" so much when the screen is off.
Click to expand...
Click to collapse
Toggle off wi-fi and bluetooth, ya dingbat! :silly: Your phone is likely trying to re-sync BT connection and/or sending a wifi heartbeat, and/or searching for wifi network.
euro1990 said:
I too had the keyboard problem. I traced it back to the keyboard app "Swiftkey3." If I use any other keyboard app (stock or not), the physical keyboard works as it should. If Swiftkey is enabled, the caps or alt keys lock on with one press. VERY annoying.
Click to expand...
Click to collapse
How about that. I did have SwiftKey installed and enabled. I switched to another keyboard and it's working fine now. Strange that it would affect the physical keyboard like that.
bakerb316 said:
I haven't tried to do anything yet because the link you supplied has in it this phrase which concerns me.... "First, make sure you have Kies installed, so that you have the correct USB drivers." I cannot connect to the phone using the latest KIES installed on my PC. Is there supposed to be KIES on my phone, because if there is, it's missing. Again, please be patient with me and thank you all for everybody's help.
Click to expand...
Click to collapse
Simply having Kies installed on your PC should make sure you have the drivers you need, you don't actually need to run Kies. Follow the instructions for download mode, and see if you get a green OK in the 4.0.4 exe. If so, you'll be fine.
Apparently Samsung has heard enough complaints about the issues with ICS and the Glide, so they made this 'announcement' on their website.
AT&T Cell Phones: How do I update my Samsung Captivate Glide to Android 4.0 Ice Cream Sandwich?
The update for the Samsung Captivate Glide has been put on hold while Samsung works to optimize the update for our users.
Here's would be the link if I would be able to attach it.
Not too sure what those 'optimizations' entail (Keyboard back light I'd assume to be one of them), or if Kies connectivity is one as well because I had a chat with one of their online support agents and he said this...
"As there is huge demand on the Kies server and that is why the update is put on hold. As the Kies server is busy the phone would not be detected."
Sounds fishy to me, but plausible.
a new update for chrome has been out today! now the onscreen keyboard is visible and works well!

[Q] Camera doesn't work after installing energy rom?

Hi, I'm a new user, I tried to post on the energy rom thread but am not allowed to.
Also, googled the issue a bit and as far as I searched didn't find similar issues.
I recently bought a htc touch pro2 and flashed it with energy rom. after flashing it, the camera doesn't start (click camera and nothing happens). also i notice when accessing settings, the camera and video tabs don't display (click multimedia > pictures and videos > menu > tools > options)
I am guessing it's some setting that should be changed, but i can't figure out how to do it.
Can you help me?
thanks.
afarcas said:
Hi, I'm a new user, I tried to post on the energy rom thread but am not allowed to.
Also, googled the issue a bit and as far as I searched didn't find similar issues.
I recently bought a htc touch pro2 and flashed it with energy rom. after flashing it, the camera doesn't start (click camera and nothing happens). also i notice when accessing settings, the camera and video tabs don't display (click multimedia > pictures and videos > menu > tools > options)
I am guessing it's some setting that should be changed, but i can't figure out how to do it.
Can you help me?
thanks.
Click to expand...
Click to collapse
Are you sure it worked on the stock rom? You might try flashing back to stock, and then reflashing the custom rom. Might be a bad flash. Random things happens sometimes.
wizardknight said:
Are you sure it worked on the stock rom? You might try flashing back to stock, and then reflashing the custom rom. Might be a bad flash. Random things happens sometimes.
Click to expand...
Click to collapse
It worked. I took some pictures.
In the meantime I flashed again and still doesn't work.
Another thing I noticed is sometimes the windows key/button/pictogram stops working, as in, I click it and nothing happens, but the phone works fine
I also flashed it (again) with a stock rom - seems to be the same I had before having started this whole mess. With the stock rom, there's no camera application at all.
I'm definitely doing something wrong but not sure what.
afarcas said:
It worked. I took some pictures.
In the meantime I flashed again and still doesn't work.
Another thing I noticed is sometimes the windows key/button/pictogram stops working, as in, I click it and nothing happens, but the phone works fine
I also flashed it (again) with a stock rom - seems to be the same I had before having started this whole mess. With the stock rom, there's no camera application at all.
I'm definitely doing something wrong but not sure what.
Click to expand...
Click to collapse
If the stock rom does not have a camera app, then how did you take pictures?
Which version of the TP2 do you have?
I am wondering if you got a flaky phone.
wizardknight said:
If the stock rom does not have a camera app, then how did you take pictures?
Which version of the TP2 do you have?
I am wondering if you got a flaky phone.
Click to expand...
Click to collapse
You have an excellent point. What the original rom and the most recently flashed rom have in common is a lot of at&t icons, so I assumed they're the same.
I don't know how to identify the version of the TP2. I bought a T7373, according to the invoice. Active Sync says I have a T7377.
Somehow I believe this whole mess is my fault, rather than the phone being flaky.
It all started because the old touch diamond 2 has the start button in the bottom left corner whereas this one had the start button in the top left corner. I wanted my button back in its place, so i started digging for a windows 6.5.3 rom...
Sounds like you should read this thread.
wizardknight said:
Sounds like you should read this thread.
Click to expand...
Click to collapse
I did. Before flashing the phone for the first time.
I googled the IMEI as well. According to the IMEI no, it's a HTC Vogue (?).
Anyway, I believe I cleared the version issue, it's HTC Rhodium 100 = T7373.
I think I cleared The missing camera issue as well, meaning that with or without icon, all roms include camera.exe.
Are there any third party apps that check connectivity to the camera (or other camera.exe implementations)?
Thanks,
afarcas said:
I did. Before flashing the phone for the first time.
I googled the IMEI as well. According to the IMEI no, it's a HTC Vogue (?).
Anyway, I believe I cleared the version issue, it's HTC Rhodium 100 = T7373.
I think I cleared The missing camera issue as well, meaning that with or without icon, all roms include camera.exe.
Are there any third party apps that check connectivity to the camera (or other camera.exe implementations)?
Thanks,
Click to expand...
Click to collapse
The Rhod100s are the bastard phones that don't work right half the time with any custom software. They are known for that.
Unfortunately you are on your own with that one. I had the Rhod400. Good luck.
I solved the problem.
Basically, these phones come in two flavors: with one cam and with two cams. The majority has 2 cams and the majority of roms are for 2 cams.
I suspected this might be the issue when I noticed in a comparison chart that T7373 has either one cam or two, also wrote a tiny app to return the exception code and message and the exception returned was "Unknown error" which I then googled and got either bad firmware or bad hardware.
In the meantime my son broke the display of the phone, so I had to fix it, and I also bought a spare stripe for the front phone, the one with the second cam, since it was quite cheap, and I had to fix the phone anyway.
Surprise. Now everything works fine.
So, the moral is, Rhodium is a very nice phone, with a good firmware, just that you need to flash the right firmware for the right model.
I'm interested in any information on how the camera is initialized, maybe I find time tomake changes to one of the versions for the less-lucky people who only have one cam.

Categories

Resources