Related
I cannot get past the start up screen! I have the CDMA diamond used
HSPL057 and attempted to update to SWIFTBL WWE DIAMOND ROM V7.5 (FULL) And now it will not go past the boot up screen!! What can I do?
you installed a GSM rom.
you need to do more reading.
1) Reading would have told you the differences between the devices and would have informed you you need hte correct one for your device.
2) you're not the only one who has done this if you do a search you will find how to recover from this issue.
3) i cant stress enough to read first do later. it helps you prevent situations like this.
Thanks for your help
The instructions said it was for SPRINT CDMA devices, that is what I have- I have searched all through out these posts and cannot find out how to recover from this. Can you please help if you know how?
todaytoo said:
The instructions said it was for SPRINT CDMA devices, that is what I have- I have searched all through out these posts and cannot find out how to recover from this. Can you please help if you know how?
Click to expand...
Click to collapse
Wouldn't believe it would say so. Link us to what you're referring to!
All is not lost..
todaytoo said:
I cannot get past the start up screen! I have the CDMA diamond used
HSPL057 and attempted to update to SWIFTBL WWE DIAMOND ROM V7.5 (FULL) And now it will not go past the boot up screen!! What can I do?
Click to expand...
Click to collapse
Hi todaytoo.
Don't worry if you can get the bootloader screen just re flash a CMDA ROM from these Diamond forums.
(enter Bootloader by pushing the reset button while holding volume down key on the side)
Hope this helps ya out.
Try here for a CDMA ROM. http://forum.xda-developers.com/showthread.php?t=430486
I can get into the bootloader screen
Thank you !!! Once I make it to there, do you know where steps are to fix my problem? I have been searching this fourm for hours before I worked up the courage to ask...or throw this phone at the wall
todaytoo said:
Thank you !!! Once I make it to there, do you know where steps are to fix my problem? I have been searching this fourm for hours before I worked up the courage to ask...or throw this phone at the wall
Click to expand...
Click to collapse
Once in bootloader mode connect to your PC via usb lead, wait for drivers to load, then
run a CDMA ROM.
Which CDMA ROM is best to use
I want to make sure that I chose one that will work this time....please suggest one..and Thank you sooo much!!!!!!!!!
todaytoo said:
I want to make sure that I chose one that will work this time....please suggest one..and Thank you sooo much!!!!!!!!!
Click to expand...
Click to collapse
Please read my above post todaytoo, I listed a CDMA there.
I must be retarded
I read your post, but dont see any CDMA ROM on it...
todaytoo said:
I read your post, but dont see any CDMA ROM on it...
Click to expand...
Click to collapse
I guess your kinda stressed at this point, so here is the line from my post
"Try here for a CDMA ROM. http://forum.xda-developers.com/showthread.php?t=430486"
You are correct!! BIG TIME
Thank you so much for your quick help. I am downloading this right now. So once I download, connect via activesync, run the ROM and I should be back in business?
Nearly there..
todaytoo said:
Thank you so much for your quick help. I am downloading this right now. So once I download, connect via activesync, run the ROM and I should be back in business?
Click to expand...
Click to collapse
Fingers crossed yes...
Read all the posts from the CDMA ROM page to get feedback and questions answered etc, and do a little more research via the "Search this forums" button before posting a query.
I guess we all started as XDA newbie's, so don't worry.
Got to log off now todaytoo.
Best of luck, will catch up on forums tomorrow.
gadjet said:
Fingers crossed yes...
Read all the posts from the CDMA ROM page to get feedback and questions answered etc, and do a little more research via the "Search this forums" button before posting a query.
I guess we all started as XDA newbie's, so don't worry.
Click to expand...
Click to collapse
Just 2 questions I think this was a good example.
Where is the CDMA Rom page?
What ROM exactly did you install? (todaytoo)
ok...its not working
ok, im at the bootload screen...I can connect to active sync. I downloaded the CDMA ROM it came in .rar format I changed to it .exe at when i run the ROM it does not do anything....
ok, now its not connecting to activsync....
Is there a trick that im not doing?
renamed a .rar file to an .exe ...new to computing?
You need to unpack/extract the rar file, just like a zip file.
Use winrar, when extracted all the goodies will be revealed!
/Psudo
wow...dont know where my head was
ok, so i have extracted it correctly....my device will still not conntec to active sync...when i plug it in from the bootscreen it changes to USB but activesync cannot find the device....any suggestions
todaytoo said:
ok, so i have extracted it correctly....my device will still not conntec to active sync...when i plug it in from the bootscreen it changes to USB but activesync cannot find the device....any suggestions
Click to expand...
Click to collapse
Dude, search a bit in the forum for things!!
Hi all, I am new here.
I had my new HTC Desire from T-Mobile delivered today. It's a good phone but I have a problem. They sent a phone with pre-release software installed. Every screen has a watermark stating "HTC Confidential" and numbers.
Any ideas of what I can do? I can't find the official rom anywhere to download. I phoned T-Mobile who couldn't do anything as they are out of stock. It was suggested I phoned back on Monday. Very helpful
I know from hotukdeals that there are at least 2 others with this problem and the lady at T-Mobile said there may have been a batch sent out incorrectly.
Here's the softwares versions if you are interested:
Firmware = 2.1
Baseband Version = 32.26.00.24U_4.04.00.03_
Kernal Version = 2.6.29-9882e023 htc-kernal and18-2#1
Build Number = 1.01.110.4 CL131766 test-keys
Software Number = 1.01.110.4
Browser version = WebKit 3.1
Thanks for any help.
(had to remove at symbol after kernal as forum won't allow it)
Take it back ASAP.
Meanwhile, just play with it.
It's not your fault and T-Mobile have to replace it.
I believe you can't upgrade the phone even if you did have the ability to download a new firmware.
Have you had a look at the contents of the SD card to see what goodies you mich have been accidentally given?
If your recovery img accepts files signed with test keys, this could be really good news
SGTDavePwnage said:
Have you had a look at the contents of the SD card to see what goodies you mich have been accidentally given?
Click to expand...
Click to collapse
No didn't think of that, will have a look and report back!
Maybe being stupid but I can't see where you go to browse the SD card?
Either plug your handset into a pc and browse it via your pc or take the sdcard out and put it into a card reader in your pc
If your on msn, PM me your details if you get stuck
Connected to PC but Vista couldn't find a driver
Or go to the android market and download any file browser?
There are lots available that are also free
pd555 said:
Connected to PC but Vista couldn't find a driver
Click to expand...
Click to collapse
When you plugged into your pc, did you specify "Disk Drive" as the usb mode?
rdgut said:
Or go to the android market and download any file browser?
There are lots available that are also free
Click to expand...
Click to collapse
Good thinking. Got Astro. Nothing of any note on there.
Have you checked your bootloader version and info? You never know you could have an S-OFF variant
I would laugh it he found some interesting information about either HTC or Tmobile on this phone
It would be great if your Desire was the key to rooting the device!
O and O said:
It would be great if your Desire was the key to rooting the device!
Click to expand...
Click to collapse
I hope so! OP, please make sure you report back here what you find - you may end up being a hero!
Check your bootloader. If it's S-OFF, party, for you will be the only one with a rooted Desire, and then use a RUU to update to a production version.
Does your keyboard have the speech to text button? If so, can you see if it works? I've just noticed that some of the older reviews on Youtube clearly show the button while it looks as though more recent roms have disabled it. From what I gather, this is because Google wants to keep this exclusive to the Nexus for the time being.
It would be cool if you have a rom which has this...
If your interested in installing a new HTC rom onto your device give me a quick PM
coolbho3000 said:
Check your bootloader. If it's S-OFF, party, for you will be the only one with a rooted Desire, and then use a RUU to update to a production version.
Click to expand...
Click to collapse
Wouldn't have a clue how to do that. Let me know how and I'll take a look.
Here is how to find out
1.Turn off your phone
2. Hold down the volume up/down button. and while holding this down press the power button.
3. release all buttons when the phone turns on.
If you write down all the text that you see at the top left of the screen and post it here we will be able to tell you
O and O said:
It would be great if your Desire was the key to rooting the device!
Click to expand...
Click to collapse
LMAO
OP may have the Holy Grail of rooted phones in his hands...and he wouldn't even have known. I will be keeping my eye on this thread! Some interesting info may or may not come out of this.
User hd2leo_fusion post in another thread...
This download contains four files that you will need to update your retail Windows Phone device to the 'Mango' Beta 2 pre-release build.
MangoB2-ZuneClient.zip - ZIP file that contains the install for the pre-release Zune Client 4.8, required to update your Windows Phone retail device and to connect to your device from the Windows Phone SDK tools.
MangoB2-UpdateWP.zip - ZIP that contains the install program(s) that will install updatewp.exe into your Zune client, allowing you to update your Windows Phone to point to the test servers
MangoB2-DevRetailUpdate.zip - Tool that automates the backup and update process so that your retail phone can receive ‘Mango'
Update Instructions - Mango Beta 2 for WPDevs.pdf - Instructions to walk you through the update process. 15 minutes here can save you 4 weeks without a phone.
Finally, one last reminder about reading the instrctions:
Please read the instructions document fully and carefully before you update your retail device. Not properly following these instructions can place your personal phone in an unusable state. Microsoft is unable to assist developers who ‘bricked’ their phone because an instruction step was skimmed or skipped.
Click to expand...
Click to collapse
Hi all
It looks like those 4 files are the files you need to perform the update !!!!!!
MangoB2-ZuneClient.zip
MangoB2-UpdateWP.zip
MangoB2-DevRetailUpdate.zip
Mango Beta 2 for WPDevs.pdf
And from what i read are device indepented ...so guys ...
Can any one with dev account post those files here please???
Good luck with this. Considering [registered] developers are only allowed to install Mango on a single device I somehow doubt you'll be able to install it as a non-dev just by patching your Zune install.
It's easy like that?
I'm giving it a shot. I have the files, going to see if it works.
I sure hope it does.
P.S. I was sworn to not share the files though. Gotta find ur own
I'll try to search them, too. But if I found them I'll post them here.
Edit: Google doesn't help =/ Seems like nobody has uploaded them, yet.
At least, can you tell us if it worked for you?
emigrating said:
Good luck with this. Considering [registered] developers are only allowed to install Mango on a single device I somehow doubt you'll be able to install it as a non-dev just by patching your Zune install.
Click to expand...
Click to collapse
I did not say that it will work 100% ...The files are just to patch the zune and send it to find the update in the MS servers ...
Dont forget that register devs are limited to unlock only 1 device ...and all of them have more than one unlocked...
Maybe this will work, for everyone ... maybe ...else why are those files hiden to general public ???
cohowap said:
I'm giving it a shot. I have the files, going to see if it works.
I sure hope it does.
P.S. I was sworn to not share the files though. Gotta find ur own
Click to expand...
Click to collapse
OK...please can you report back if you did made the update with out any prob ???
So far so good, installed the "pre-mango" update, no hicups yet.
The only confirmation it has so far is to confirm you have a dev unlocked phone. No dev unlock phone, no update.
cohowap said:
So far so good, installed the "pre-mango" update, no hicups yet.
The only confirmation it has so far is to confirm you have a dev unlocked phone. No dev unlock phone, no update.
Click to expand...
Click to collapse
Please, share with us the files!
Sounds very good Thanks!
Edit: He said that he's not going to share the files. We should accept that
mikeeam said:
Please, share with us the files!
Click to expand...
Click to collapse
Read a few posts up. They aren't my files to share, I'm sure they'll be leaked out eventually, but I'm not going to screw a friend over who gave me them if there is some sort of hidden tracking.
I'll report the progress, but no files.
P.S. seems this update is going to take at least an hour. I'll post back when it finishes. Also, from start to where I am now, it's been pretty painless. And NO i don't have the Beta 2 tools installed, so it apparently works without them, despite what the document says.
Ah, ops, sorry. Okay then.
At least we will know if this will work to everyone when leaked.
Is it official and confirmed that each developer can only update one out of his three devices?
dkp1977 said:
Is it official and confirmed that each developer can only update one out of his three devices?
Click to expand...
Click to collapse
"You may update only one phone per developer."
http://create.msdn.com/en-US/news/Mango_Beta
Here.
cohowap said:
And NO i don't have the Beta 2 tools installed, so it apparently works without them, despite what the document says.
Click to expand...
Click to collapse
The documents say that in order to DEPLOY anything on your Mango updated device you need the B2 SDK
mikeeam said:
"You may update only one phone per developer."
http://create.msdn.com/en-US/news/Mango_Beta
Here.
Click to expand...
Click to collapse
Alright, thank you. Now that's bad news. At least for me. So I'm gonna have to wait for the official release.
emigrating said:
The documents say that in order to DEPLOY anything on your Mango updated device you need the B2 SDK
Click to expand...
Click to collapse
I planned on having them installed eitherway, just that the excitement overcame my ability to remember longer than 20 seconds to install them before kicking off the update lol.
So far still in updating mode... Been about 30 minutes i think, document says 70.
Phone just reset itself, looking at the bug list, it an take 5-45 minutes to restart, we'll see. Hopefully we're done soon.
"Not for resale" written on the Windows Phone boot screen. And we're live!!!
Mango is up and running!
cohowap said:
Phone just reset itself, looking at the bug list, it an take 5-45 minutes to restart, we'll see. Hopefully we're done soon.
Click to expand...
Click to collapse
Thanks for the updates m8....keep them coming until you finish the update
Hello everyone, this is the first time I write on this forum
I just bought a Chinese phone dual sim, CUBOT ALP8809 (A8809), and would like to obtain root privileges.
Until now, I could not find a software or a guide to solve the problem.
The phone is not widespread and little known in the various forums. I think we have the same phone, but with a different brand.
I would also like to know, if I cause damage to my phone, making attempts with various existing programs.
below the main specifications:
Brand CUBOT
Model A8809
Type Brand New
Form Factor Touch screen
Operating System Android 4.0
Processor MTK6577 Dual Core 1GHz
RAM 512MB
ROM 4GB
Available Memory 2.8GB
Support extend card 32GB
Screen
Touch screen Capacitive 5 point touch
Display Size(Inch) 4.7 inch
Screen Resolution 960*540 pixels
Screen Type IPS QHD
Display Colour 26k colors
Networking GSM/WCDMA
Frequency 2G:GSM850/900/1800/1900MHz; 3G:WCDMA 850/1900/2100MHz
Data transfer GPRS/HSPA/EDGE
WIFI YES,802.11 b/g
I apologize for my English, I'm Italian, and use the translator
not sure if this works but it looks like the real deal
try this i just found it after a week of looking. i will be doing it to mine in a few hours. good luck
w w w.pandawillforum.com/showthread.php?15105-Bootloader-and-Rooting-for-CUBOT-a8809/page2&highlight=cubot
mikeyggg said:
try this i just found it after a week of looking. i will be doing it to mine in a few hours. good luck
w w w.pandawillforum.com/showthread.php?15105-Bootloader-and-Rooting-for-CUBOT-a8809/page2&highlight=cubot
Click to expand...
Click to collapse
the easiest root ever
it worked great just make sure you put the zip file on the internal 2gb sdcard with the usb storage mode on you should see it.do not unzip it just drop it to the sdcard not in a folder.
many thanks for the information!
You think I will not lose the settings of the phone (software and various settings)?
Quach is a danger that could damage the phone?
Thank you again ....
I followed your instructions and the procedure is successful!
I just find it hard to get into recovery mode ... the phone stopped on the screen of the robot 3D Andorid, but after a few minutes off again normally, but in the end I could not.
Great!
I wonder if this would work on other chinese android too? Im planning on getting a samsung s3 clone with quadcore cpu! Its really beefy for a chinese phone!
mikeyggg said:
the easiest root ever
it worked great just make sure you put the zip file on the internal 2gb sdcard with the usb storage mode on you should see it.do not unzip it just drop it to the sdcard not in a folder.
Click to expand...
Click to collapse
Is anyone else rooted Cubot A8809 with android 4.1.1 this way? Were there any problems?
darko150 said:
Is anyone else rooted Cubot A8809 with android 4.1.1 this way? Were there any problems?
Click to expand...
Click to collapse
Any new on rooting Cubot A8809 with Android 4.1?
rafobr said:
Any new on rooting Cubot A8809 with Android 4.1?
Click to expand...
Click to collapse
I tried to root, but I get the message:
Error: Invalid partition setting 17: fat 741e8000:629e8000
....Instalation aborted
I have new phone, 1 day old, Android 4.1.1
Is there a solution?
---------- Post added at 05:25 PM ---------- Previous post was at 04:58 PM ----------
mikeyggg said:
the easiest root ever
it worked great just make sure you put the zip file on the internal 2gb sdcard with the usb storage mode on you should see it.do not unzip it just drop it to the sdcard not in a folder.
Click to expand...
Click to collapse
Is it particularly important that the SD card is 2GB, but not more?
I tried with 16GB sd card and I got the message:
"Error: Invalid partition setting 17: fat 741e8000:629e8000
....Instalation aborted"
Another way to root
I found this link, so I wondered if someone root his phone on that way?
http://blog.geekbuying.com/index.ph...w5-suitable-for-all-smart-phone-with-mtk6577/
I just ordered this phone last week, i hope theres a solution before it gets here!
Unrelated... has anyone been able to find, screen covers or cases for the phone?
badillin said:
I just ordered this phone last week, i hope theres a solution before it gets here!
Unrelated... has anyone been able to find, screen covers or cases for the phone?
Click to expand...
Click to collapse
Yesteray I Root my Cubot A8809.
according to the process:
http://chinamobiles.org/showthread.php?32195-Universal-ROOT-für-MTK6577-Plattformen
I'm a beginner, and helped me a lot tommy0815
Useful information you got here:
http://chinamobiles.org/showthread.php?33187-Cubot-A8809-rooten&highlight=cubot
and
http://chinamobiles.org/showthread.php?33248-Root-für-MT(k)-65xx-Handys&highlight=65xx
darko150 said:
Yesteray I Root my Cubot A8809.
according to the process:
http://chinamobiles.org/showthread.php?32195-Universal-ROOT-für-MTK6577-Plattformen
I'm a beginner, and helped me a lot tommy0815
Useful information you got here:
http://chinamobiles.org/showthread.php?33187-Cubot-A8809-rooten&highlight=cubot
Click to expand...
Click to collapse
Are you running JB 4.1.1?
brotherman38 said:
Are you running JB 4.1.1?
Click to expand...
Click to collapse
Yes
darko150 said:
Yesteray I Root my Cubot A8809.
according to the process:
I'm a beginner, and helped me a lot tommy0815
Useful information you got here:
and
Just got the phone and i just couldnt root it with the "easy method" im trying to follow the russian instructions... but my native language is spanish, and google translator collapses the text and i get a wall!
Any instructions in english?
Had to delete links because i couldnt post them :/
Click to expand...
Click to collapse
Root on factory way
badillin said:
darko150 said:
Yesteray I Root my Cubot A8809.
according to the process:
I'm a beginner, and helped me a lot tommy0815
Useful information you got here:
and
Just got the phone and i just couldnt root it with the "easy method" im trying to follow the russian instructions... but my native language is spanish, and google translator collapses the text and i get a wall!
Any instructions in english?
Had to delete links because i couldnt post them :/
Click to expand...
Click to collapse
Here is the default factory mode for Root.
I have not tried it, but some say it works
Download all files Cubot a8809 and You have everything you need. Download and Manual for Root
http://www.cubot.net/Service.aspx
Click to expand...
Click to collapse
Broken Cubot
Goodmorning!
I tried to root my Cubot, this went horribly wrong after which the phone is now stuck on boot.
I've tried several times to do a factory reset, but the phone doesn't respont to is anymore.
The only functions still active are Back-up and Restore.. So now I was wondering if perhaps any of you has an Back-up of his/hers cubot a8809 so that I can Restore my phone, this is kind of my last hope to fix the phone since Cubot is not responding, and the phone doesn't react to their refresh-software..
If possible please sent to [email protected]
Kind regards and excuse for the dutch-tinted English,
Leendert
Leendertvdstelt said:
Goodmorning!
I tried to root my Cubot, this went horribly wrong after which the phone is now stuck on boot.
I've tried several times to do a factory reset, but the phone doesn't respont to is anymore.
The only functions still active are Back-up and Restore.. So now I was wondering if perhaps any of you has an Back-up of his/hers cubot a8809 so that I can Restore my phone, this is kind of my last hope to fix the phone since Cubot is not responding, and the phone doesn't react to their refresh-software..
If possible please sent to [email protected]
Kind regards and excuse for the dutch-tinted English,
Leendert
Click to expand...
Click to collapse
Can't just just reinstall the software from Cubot site?
http://www.cubot.net/Service.aspx
the post i like it ,
thank you for post , i know the phone root from web , i will start root phone
brotherman38 said:
Can't just just reinstall the software from Cubot site?
Click to expand...
Click to collapse
At first I thought that it didn't work, but after a few hours of trying I succeeded.. Found out that Cubot's program doesn't support Windows 8.
Thanks for the help anyway!
Hello, I'm interested in rooting my Incredible 2, and every guide I've read says to downgrade to 2.3.3, then use Revolutionary to obtain s-off. Well I found Revolutionary via the wayback machine, but I'm unable to generate a beta key using my serial number since the site is gone.
So I was wondering, is there a way to generate a key to use Revolutionary, or alternatively, is there a different way to get s-off. Is it too late for me to root?
Thanks
I used the official HTC page to unlock BL and get root, but no SOFF. I dont believe you can still use revolutionary.
ethanchow said:
I used the official HTC page to unlock BL and get root, but no SOFF. I dont believe you can still use revolutionary.
Click to expand...
Click to collapse
If I were to root like you did, would it keep the ROM even after a reboot? My understanding was you need s-off to actually root it. I was hoping there may be some other way to get S-off
TheAfikoman said:
If I were to root like you did, would it keep the ROM even after a reboot? My understanding was you need s-off to actually root it. I was hoping there may be some other way to get S-off
Click to expand...
Click to collapse
Yes the ROM would stay but you need to flash boot.img from fast boot
The revolutionary website can now be found here: http://rev.alpharev.nl/
The beta key will show up once you click one of the download buttons. Lucky you, I was given a Droid Incredible 2 to work on so I've been looking for this kind of stuff the past few days.
tomiga said:
The beta key will show up once you click one of the download buttons. Lucky you, I was given a Droid Incredible 2 to work on so I've been looking for this kind of stuff the past few days.
Click to expand...
Click to collapse
I saw the new site but it said "AlphaRev 1.8 is now deprecated software. If at all possible, use Revolutionary instead." And then the link was to the old site.
Mind walking me through exactly what link gets me to the key?
Thanks
TheAfikoman said:
I saw the new site but it said "AlphaRev 1.8 is now deprecated software. If at all possible, use Revolutionary instead." And then the link was to the old site.
Mind walking me through exactly what link gets me to the key?
Thanks
Click to expand...
Click to collapse
On rev.alpharev.nl, click either "Download for Linux" or "Download for Windows". It'll come up with a form. Fill it out, hit Generate key and you'll get your key.
tomiga said:
click either "Download for Linux" or "Download for Windows". It'll come up with a form. Fill it out, hit Generate key and you'll get your key.
Click to expand...
Click to collapse
Are you using a cached version of the page? I don't see those options (saw them using the archived version of the site but the key wasnt operational)
The screenshot I took is what I see when I visit that site.
If I gave you my serial # could you generate the key for me?
TheAfikoman said:
Are you using a cached version of the page? I don't see those options (saw them using the archived version of the site but the key wasnt operational)
The screenshot I took is what I see when I visit that site.
Click to expand...
Click to collapse
You're going to alpharev.nl, not rev.alpharev.nl. The proper website looks like this:
If you want though, I guess you can throw me your serial number (PM it to me), but the site does work and you should be able to do it yourself...
I've got no idea what's going on. I get the same site no matter what... strange. I PMed you, if it works, great!
TheAfikoman said:
Are you using a cached version of the page? I don't see those options (saw them using the archived version of the site but the key wasnt operational)
The screenshot I took is what I see when I visit that site.
Click to expand...
Click to collapse
On my nexus 7 latest stock rom and chrome I see the correct page, but on my win8 pc with chrome I see what you are seeing. You may want to try visiting the page from a mobile device
---------- Post added at 05:43 PM ---------- Previous post was at 05:34 PM ----------
TheAfikoman said:
Are you using a cached version of the page? I don't see those options (saw them using the archived version of the site but the key wasnt operational)
The screenshot I took is what I see when I visit that site.
Click to expand...
Click to collapse
It seems to only work on linux machines, including androids. I tried it with chrome on win8.1 and ie on win8.1 and it showed the alpharev page. On stock 6.0.1 android chrome and FF ubuntu it shows the new revolutionary page.
It's sort of disturbing to me, since I have never encountered this issue of being unable to access a certain branch of a site before. I even tried looking up DNS suffix devolution to see if I could fix the issue and view the site correctly. Alas I was not able, no matter my browser, to see that specific page on my desktop.
Here's the thing though, I tried the page on my Incredible 2, same result, could not get to the correct page. So that made me think it had something to do with my router, or maybe even ISP? I used a different wifi on my phone, and was able to view the correct page for the first time. I would love to get to the bottom of this.