Develop Bugs

Bug list for MagLite's Dell X50v WM6 A01 ROM

This is from the "Bug list for Football Dell x51v WM6 A01" thread. It is an excellent idea to start a new thread for confirmed bugs, so that is what this thread is for. Jackleung had a great post with some confirmed bugs and workarounds. It serves as an excellent basis for the X50v WM6 A01 ROM as they share in many of the same issues. Here is the direct link to his original post, also: http://forum.xda-developers.com/showthread.php?p=1449008#post1449008
jackleung said:
I think it's better to create a new thread to list all the known bugs in Football WM6 A01. Please feel free to update me if any of the known problem is not exist from you or any workaround.
1. Windows Live will not work after installation. Cab can be found here: (http://forum.xda-developers.com/showpost.php?p=1431168&postcount=15)
2. Wifi WPA-PSK does not work. Workaround: use Odyssey
3. "server security is not valid" issue (http://forum.xda-developers.com/showpost.php?p=1448919&postcount=246)
4. Incorrect Friedlyname for COM1 Serial. Detail and solution: (http://forum.xda-developers.com/showpost.php?p=1449144&postcount=2) and this http://forum.xda-developers.com/showpost.php?p=1451580&postcount=19
5. Card Export not working
6. Windows Media Decoder / IR / etc and fix: http://forum.xda-developers.com/showpost.php?p=1451677&postcount=314
Click to expand...
Click to collapse
Please add to this bug list as neccesary. *PLEASE PLEASE* only post bugs! This is not for general questions/discussion. Please move general questions/discussion over to the original X50v WM6 A01 thread. Thank you for cooperating!

A2DP: connect but no sound

Yes, I think it's a very good idea to sum the bugs up.
Just to clarify some issues:
A) about point 3 - You cannot even install a root (someone also reported the same for intermediate) certificate on the X50v in order to be used with a SSL Exchange connection (or other purposes).
B) regarding the Wifi issue (point 2). This is very delicate because I think the fault is in the driver. I made several tests with X50v (and X51v also) with all official ROM's and I found that:
- WM 2003 was the best implementation - I tested 3 different wireless AP-s with WEP and/or WPA and I noticed that sometime Oddysey was required for WPA, sometimes not (depending on the AP). But it worked without problems.
- WM5 A01 - this was not tested very much (you know why )
- WM5 A02 (and A03 ) - here the problems started to appear. First of all, it seems that the Wireless driver is correctly loaded only if Bluetooth is activated before. So if you start a Wifi connection with BT off you have very small chances to work, regardless of the security type. (After the Wifi connection is made BT can be turned off and it will work fine).
But, even if Wifi is working I noticed that WPA is not working with all Access Points, using Oddysey or not. I think the list of working AP-s is a lot smaller than the WM2003 one... Also, the same problem is present in X51v latest WM5 official ROMs (previous WM5 ROMs for X51v were better from the Wifi point of view). So the AP type (chipset/firmware) is a big variable here.
My opinion now is that HTC and/or Texas Instruments is the real responsible for the Wifi issues and there is not much that Maglite or other could do...

Word completion is not working.

stopthebus said:
A2DP: connect but no sound
Click to expand...
Click to collapse
Check out this post:
http://forum.xda-developers.com/showpost.php?p=1452704&postcount=25
Let us know if that works!

Hmmmm i'm not sure if this is a bug.. but something i noticed.. and i think it should be classified as bug...
i press power button to turn it off .. then i put keylock on.. go to work.. go to lunch come back.. battery is drained.. ????????????
before anyone replies, the battery is fine, it lasts for hours..
and this happened 3 times now.. 1st timei thought i must have left it on in my bag.. so didnt think much of it.. 2nd and 3rd time i actually made sure it wasn't on.. so what the hell?

Hey, my thread is copyrighted. ;p
Maybe you can put the URL on yr first post for faster lookup.

jackleung said:
Hey, my thread is copyrighted. ;p
Maybe you can put the URL on yr first post for faster lookup.
Click to expand...
Click to collapse
It was just so perfectly structured and the perfect basis for another similar thread! I just added the link. There is a lot of great bug related stuff on your thread! It'll be a big help for us X50v users!

Bluetooth needs the support of BT PAN
I tried to use this x50v with WM6 A01 to connect to my smt5600 with WM6 with Bluetooth. smt5600's WM6's Internet sharing requires Bluetooth PAN. The x50v's WM6 A01 bluetooth doesn't support it at all.
I tried to put Widcomm stack. Even though it connects, but the Internet is just not working at x50v end.

alpha-z said:
Hmmmm i'm not sure if this is a bug.. but something i noticed.. and i think it should be classified as bug...
i press power button to turn it off .. then i put keylock on.. go to work.. go to lunch come back.. battery is drained.. ????????????
before anyone replies, the battery is fine, it lasts for hours..
and this happened 3 times now.. 1st timei thought i must have left it on in my bag.. so didnt think much of it.. 2nd and 3rd time i actually made sure it wasn't on.. so what the hell?
Click to expand...
Click to collapse
Same for me and I have the extended battery.

The same
The Windows live messenger dont work, any have a new cab?

labtelcel said:
The Windows live messenger dont work, any have a new cab?
Click to expand...
Click to collapse
Didn't you see that Windows Live is listed in this very thread as having bugs?

battery drain with key lock enabled
mjassbong said:
Same for me and I have the extended battery.
Click to expand...
Click to collapse
I've had the same thing happen for me with WM2003SE, so I don't think it's unique to WM6. My thought at the time was that it was an issue with a calendar alarm that woke the Axim up and it never went back to sleep... I never got to the bottom of it as I just disabled the option that wakes it up with a button push and keep it in a rhinoskin for protection.
chezdude

i had a lockup where i couldnt turn the device off, and needed to hard reboot, but i havent been able to reproduce it

Filesys.exe cause 100% full load.Here is my screen capture after flashing rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is pristine and no software installed.Only few original core process is running except task manager and screen capture program.
Filesys.exe run at low priority,it may not very affect you ppc performance very much.If you run a cpu hungry software ,filesys.exe would suppressed a lot, below 50%.But if your ppc idle, filesys would keep cpu clock speed stuck at 624mhz.You need to switch to power saving mode to saving your battery.
Nothing work with activesync fake server and compaction256 edit.

3dot said:
Filesys.exe cause 100% full load.Here is my screen capture after flashing rom.
It is pristine and no software installed.Only few original core process is running except task manager and screen capture program.
Filesys.exe run at low priority,it may not very affect you ppc performance very much.If you run a cpu hungry software ,filesys.exe would suppressed a lot, below 50%.But if your ppc idle, filesys would keep cpu clock speed stuck at 624mhz.You need to switch to power saving mode to saving your battery.
Nothing work with activesync fake server and compaction256 edit.
Click to expand...
Click to collapse
How long does it run like that? Of course Filesys.exe is going to run immedietly after you flash your ROM. Again, I don't think this is a bug as there are not many who have reported the same problem. Sure it's annoying just the same, but how many others have you heard that have reported the same problem?

jerryfreak said:
i had a lockup where i couldnt turn the device off, and needed to hard reboot, but i havent been able to reproduce it
Click to expand...
Click to collapse
So how is that qualified as a bug, then? Doesn't it seem logical that a "bug" should be a fairly consistently occurring problem? Most likely, a "bug" would also be consistent between several other users.
Here's a statement along the same lines as your logic:
"I once killed a fly, just by throwing an orange ball across my house, but I haven't been able to do it again."
Why don't we try to keep "bug reports" true to their name. There's no reason to post an event that occurred one time "once upon a time", but hasn't happened since. If you see something from the original X50v WM6 A01 post (or X51v WM6 A01 that applies to both ROMs) that several people are having issues with, then post it. Don't just post every random occurrence of anything in this thread.
Please! I'm begging people to help me keep this thread a lot less cluttered than the original X50v WM6 thread!

in a perfect world, yes. but it is something that happened that was bad that i havent ever seen, so i reported it. settle down, dude.
cavyman said:
So how is that qualified as a bug, then? Doesn't it seem logical that a "bug" should be a fairly consistently occurring problem? Most likely, a "bug" would also be consistent between several other users.
Click to expand...
Click to collapse

jerryfreak said:
in a perfect world, yes. but it is something that happened that was bad that i havent ever seen, so i reported it. settle down, dude.
Click to expand...
Click to collapse
Here is your original post:
Originally Posted by jerryfreak
i had a lockup where i couldnt turn the device off, and needed to hard reboot, but i havent been able to reproduce it
Click to expand...
Click to collapse
Even on the odd chance that your post qualifies a legitimate bug, what bit of information did it give anyone that gives any insight whatsoever into what caused your "bug"? The only thing I'm able to get from it is, "Hey, my device locked up and I couldn't turn it off. Had to hard-reset. Hasn't happened again."
Congratulations. Thanks for letting us know that useless bit of info. Any chance you could give some details that at least point us in a general direction as to what might have caused your lock-up? Were you running any other programs when it happened? Were you using storage cards? Had any wifi turned on? Playing solitaire? Deleting important Windows files? Formatting your BIS from WM6 while it was running? Something.....anything useful?
But hey, on the upside of things, at least now this thread has an example of the typical generic, useless bug post that cluttered up the main WM6 A01 thread! Now I can point people to your post and use it as an example of what NOT to post in this thread.

OK, well i haven't figured out the cause yet.. i'll run task manager later.. but even while its on with wifi and bluetooth off with nothing running i'm staring at the battery screen and approximately every 10 seconds 1% battery drains.. so.. sufficed to say i got in car turned x50v off.. drove 20-30 min, ding ding, power critically low.. :\ so.. first of all even with the stupid thing off. its draining batt like stupid. and while on without wifi and bt, draining battery like stpuid.. 1% for 10 seconds isnt normal.. wmo2003 lasted hrs.. :\ so its not my battery..
plz advise?

Get NoDo now without using VPN and dialup!

Hi,
yesterday I updated my LG Optimus 7:
Zune sayed, that i was currently using the latest version (7008) of WP7.
I didn't want to install a VPN client and a dialup.
So i did it as described following:
1. Start Zune
2. Turn off Data connection and Wifi on the Phone
3. Connect the Phone with the PC (USB)
4. Start the update search in Zune
5. About 3 seconds later, disconnect your PC from the internet (Turn WLAN off).
6. Zune finds NoDo-Update. Press OK.
7. Connect to the internet again and install the update.
Should work for all devices that can be updated by the VPN / dialup solution.
If it fails at point 5, try other timepoints for disconnecting, or try it again disconnected.

It Works Perfect ! You are the Man !
Thanks
My Phone= Omnia 7 German unbranded

Will try this once I get home and report.

I can confirm this is working for my Vodafone branded HTC Trophy.
See this link for a screenshot. http://cloud.jorijn.com/5cJv
Man, you are awesome. I thank you.
Edit: It worked the first time. I timed the "There is no update available" twice which took 11 and 10 seconds. I then pulled the WiFi switch on 8 of 9 seconds. Bingo.

Works!
This worked on my AT&T LG Quantum. Not sure whether it matters, but I had previously unbranded it with the registry edit (took out ATT-US).
Thanks for the tip--great find!

Can't get this to work on my AT&T-branded Focus.
Jorijn said:
Edit: It worked the first time. I timed the "There is no update available" twice which took 11 and 10 seconds. I then pulled the WiFi switch on 8 of 9 seconds. Bingo.
Click to expand...
Click to collapse
My "There is no update available" message takes about 2-3 seconds to come up. Maybe the speed is complicating this, heh, but it doesn't seem to matter how quickly I do a hardware or software disconnect--I'll either get the "no update" message or a "we can't check for updates right now."

Thank you Noticed!! Worked like a charm on the second try. Updating as I type this

i confirm that it works
i got it twice actually
i was too excited the first time and clicked update without connecting back to the internet
i was calmer the 2nd time and i'm updating now!
posting from singapore on a 7 pro bought from the uk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Noticed said:
Hi,
yesterday I updated my LG Optimus 7:
Zune sayed, that i was currently using the latest version (7008) of WP7.
I didn't want to install a VPN client and a dialup.
So i did it as described following:
1. Start Zune
2. Turn off Data connection and Wifi on the Phone
3. Connect the Phone with the PC (USB)
4. Start the update search in Zune
5. About 3 seconds later, disconnect your PC from the internet (Turn WLAN off).
6. Zune finds NoDo-Update. Press OK.
7. Connect to the internet again and install the update.
Should work for all devices that can be updated by the VPN / dialup solution.
If it fails at point 5, try other timepoints for disconnecting, or try it again disconnected.
Click to expand...
Click to collapse
Wow, this really works! nice find! thanks for sharing Noticed

oh this is much easier, thanks! I'd tried the other way a lot of times and had one success, but then got told I had insufficient disk space and had to start all over again. With this method I only had to try a few times. Only thing that slightly confused me was when you said to disconnect from wireless that I wasn't sure if that was the PC or the phone. Since my PC is wired I just disabled the NIC after 3 seconds. I'd say it worked twice out of about 10 attempts.
thanks

just finish updating
thank you TS for such a great solution
beats that hungary solution hands down

Nice solution!
If it's ok I will integrate it to the sticky thread.

Focus
I have a locked (no Chevron), branded (AT&T) Focus and can't get this to work. Zune says I am uptodate with 7004 (I do not have the pre-nodo). Should this be working for me?

lol nice. works with unbranded vodafone htc trophy. thanks man!

JamesAllen said:
I have a locked (no Chevron), branded (AT&T) Focus and can't get this to work. Zune says I am uptodate with 7004 (I do not have the pre-nodo). Should this be working for me?
Click to expand...
Click to collapse
Same.
Since I'm about tired of AT&T's holdups, I might unbrand later today and try again. Are there any consequences to unbranding? I'm assuming I won't be able to connect to the AT&T appcenter, but I can live with that. Will it mess up my messaging or anything?

Amazing.
First try, worked like a charm. Thank you very much!

Hd7 O2 Germany, super Danke........

Thumbs up. Worked on my Samsung Focus AT&T 000-88 registry hack!
edit: maybe because if the internet at my place is slower, I need to turn off my wifi at around 8 seconds mark. The whole process takes around 10 seconds before zune show no update if leave alone.

Works great on my T-Mobile HD7, Thanks!

wow this works!!
Tried all other methods and nothing worked but by my 3rd attempt using this and it was there!
Not sure if this helps but if it fails then disconnect the phone from usb wait a sec and then plug back in. This seems to help with the timing as I found that if it fails and you try again right away the "your phone is up to date" message comes up quicker.
Developer unlocked (offical developer unlocked) UK 02 branded HTC HD7

Jelly Bean Reception Lost Overnight

I've tried this for two days and I'm out of ideas. My Galaxy Nexus (Jelly Bean 4.1.1) lost all bars of reception overnight. Please lend me your expert aid!
Some context: My phone was running perfectly fine for a week after flashing official Takju 4.0.4 using the GN Toolbox, then doing an OTA update to 4.1.1. All of a sudden, all reception is lost with bursts of 1-2 bars of reception for 10 seconds every 5 minutes. The remainder of the 4 minutes and 50 seconds, I'm stuck with zero bars (Note: WiFi works fine). Note that before this, I have had this phone for a couple months with it working flawlessly as well, before flashing Takju (when it was on Yakjuux).
I have tried turning on/off airplane mode, restarting phone, disabling mobile ap, using only 2G networks, changing APN to a numerous different settings, praying, removing and replacing the SIM card, holding the phone in different ways/not holding it at all, moving to different locations around the city (in case it's a region thing), toggling Google Location Services, toggling GPS and NFC, and just waiting a day to hope it fixes itself or that it's a server-side problem.
I am in Vancouver, BC on Rogers with a data plan.
I have not tried flashing a new radio. This is because I flashed to the Takju build purely so I can get OTA updates; if I root (again) and install CWM, then flash a new radio, it is to my understanding that I will no longer get OTA updates. Note, however, that my phone had good reception for around a week of time... doesn't that mean the radio is fine the way it is?
Please help me out... What other things should I try, XDA?
Regards,
Eddy.
===Edit===
In fear of becoming one with the Wisdom of the Ancients (ala xkcd's /979/), I wanted to let everyone know:
I Fixed it without opening up the phone at all:
After troubleshooting that this was indeed not a software issue (it was working for a week!), I approached it as a hardware issue. I looked all over the interwebs to find teardowns of the Galaxy Nexus to find where the antenna is. ifixit has a teardown and is a very useful reference, as are other videos you can find. The antenna itself is a simple "button down" antenna, similar to the Galaxy S2, and this video shows this best. Notice that all it is is like a button clip on.
Youtube's /watch?v=65pvAINg2ME&t=24m34s <XDA won't let me link video>
My antenna must have come loose over time on my Galaxy Nexus.
Instead of opening then entire device up, all I did was figure out precisely where the ends of the antenna are and gave my nexus a tight squeeze in those locations. Clearly, do not sqeeze so hard that your screen breaks... just a tight, safe squeeze. Where are they? I came prepared!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A quick squeeze here, in these two locations and we're back at 3-5 solid bars with no dropped calls!!!
=== End Edit ===
== Old context ==
PS: My APN settings are as follows:
Name: Rogers
APN: internet.com
Username: wapuser1
Pass: wap
MCC: 302 (default)
MNC: 720 (default)
PSS: more context: I use my phone a lot with WiFi, using Skype to video chat (e.g. an hour a day)...
PSSS: I have done the exact procedure to get the Jelly Bean update to my brother's and another friend of mine's Galaxy Nexuses (Nexii?) recently; they have not had such problem.

Still Having Problems
Bump!
I'm still having problems... anyone want to swoop in for a save?
-Eddy.

Bump! Any help guys?!

Bad sim card? Have you tried your sim in another phone?

narutoreplicate said:
Bump! Any help guys?!
Click to expand...
Click to collapse
Is your device UNLOCKED? Try unlocking it . . .
Use this ToolKit: http://forum.xda-developers.com/showthread.php?t=1392310 .

Androidin' said:
Bad sim card? Have you tried your sim in another phone?
Click to expand...
Click to collapse
Yes, I've tried it with an older phone and it works.
mpmaheshbabu said:
Is your device UNLOCKED? Try unlocking it . . .
Use this ToolKit: http://forum.xda-developers.com/showthread.php?t=1392310 .
Click to expand...
Click to collapse
To my understanding, if my phone isn't unlocked or locked to a different carrier, I would not have a week of working Galaxy Nexus on Rogers, nor can I get bursts of working reception, as I would get 0 reception all the time... Can someone confirm if this is true?
Also, did you mean unlocked as in the bootloader? Because it is; it's the only way I could flash to a different image. I've actually got to Jellybean through this mentioned toolkit.
Any other ideas, guys?

[Q] Big problem htc one m8 dual sim after lollipop update

hello everyone, I have a big problem with my htc one m8 dual sim, after the lollipop update the phone detects two SIM but no network for the second sim only the first slot that detects the network, I ' I try with several sim same problem [emoji17] [emoji17] [emoji17]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is what I am the only one with this problem?
Envoyé de mon HTC One_M8 dual sim

Try AIRPLANE MODE ON-OFF
I have a message that SIM2 is out of network, but it works fine and I can make calls

SpineSurgery said:
Try AIRPLANE MODE ON-OFF
I have a message that SIM2 is out of network, but it works fine and I can make calls
Click to expand...
Click to collapse
I tried it all but without result. I think the only option left to me is to flacher a stock rom, unfortunately I do not know how

SIM 2 No service
I have similary problem... I have notifucation that SIM 2 No service, but I have network

Same here Choofee...
+ my updates are very slow. When I initiate update download via Google Play, it is very slow
+ sometimes my network switches to EDGE on its own
+ when I turn on phone, it takes few minutes to connect to network
We need new update!!!!

I solved the promblème [emoji2] it was a mistaken setting, it was necessary to seek the manuelement network instead of scanning.

Hi
I was hit the same with this Slot 2 No Service bug.
Annoying but I was able to solve it by doing a factory reset of my HTC One M8 dual sim... (Power + Volume Down -> Factory setting reset)
Raphael

There are any other issues after the update? Is it worth doing it?

ady_uaic said:
There are any other issues after the update? Is it worth doing it?
Click to expand...
Click to collapse
After boot, mobile data connection establish very slow! It takes 1-2 min till connect to network. If i switch off and on the screen, cellular data working immediately!! Anyone know solution to resolve this issue?

Factory reset should solve all issues (I read on one German forum).. i don't want to do reset!

Unfortunately "factory reset" is often THE solution.
Since that I am more than happy with this update. Battery life restored (it was going down so quickly before that). Dual SIM running smoothly. New smart lock feature based on GPS location is a nice new feature.
My smartphone is great now.
But I admit factory reset is p*** in the *** as I had to disable dual Auth based on Google authenticator on a lot of websites and global reconfiguration took me half a day.
Raphael "A happy upgrader"

I have same issue , I tried all options with no hope,,, waiting for updates

SpineSurgery said:
Factory reset should solve all issues (I read on one German forum).. i don't want to do reset!
Click to expand...
Click to collapse
I did a factory reset, but slow data connection issue after boot remain!

About slow connection... I also discovered after factory reset that my SIM1 setting went to "only 2G" or "only 2G/3G" (not 100% sure).
I had to enable "2G / 3G / 4G auto" manually via Mobile Data.

I did the update saturday morning, then factory reset, then restore from htc backup all my apps. everything's good so far. big improvement of battery life (about 30% improvement) - I've charged it to 95% on saturday and now (after 30h of use) it's on 19% (I streamed an online radio which took 10% in 20 minutes - that's normal, the app eats the battery).

my phone works terrible since update. i think i will have to make factory reset also

after update it's mandatory to do a factory reset (before the update you can make a backup with htc backup and everything will be placed in its own place after restore).

Works perfect after full reset (cache + system settings)

Hello, I have even KK 4.4.4, is worth doing update? Is it the battery life better? There are notable improvements?
Thank you

Samsung a50 Exclamation beside Wifi signal

Hi, this morning i suddenly noticed that my wifi signal icon at the upper right has a exclamation point, i know the meaning of that is that you dont have internet access but what intrudes me is that i use the same wifi with my laptop and it has internet in it, while in my phone i can only use facebook messenger and i cant use any other apps or even search in google.
Hope you u can help me.
Thank you

I've also seen the exclamation point on the wifi signal, I see it every now and then even if my wifi is working. It goes away after after a few seconds but I only started seeing it now after the update. Could it be a bug???

call ur internet provider, probably forgot to pay ur bill

Re-activating this concern...
Good day XDA Moderators,
We would like to remonstrate the right of providing SME with the above concern.
My wife's A50 also experience the same manifestation wifi symbol with an exclamation point on it.
Tested with various devices, only the Samsung A50 has this issue.
As a user of gadgets and devices we are seeking your kind assistance if there was a resolution for this item.
Thank you XDA for your kind consideration.

elliwigy said:
call ur internet provider, probably forgot to pay ur bill
Click to expand...
Click to collapse
We cannot find the RESOLUTION for this thread...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and this is not a JOKE, my wife's Samsung A50 is not connecting to any wifi network only it's DATA.
We've search this XDA site for the resolution but there were not found.
We would like to remonstrate the right for an SME to help and assist us because the said "JOKE" is not and "Samsung A50 Exclamation beside Wifi signal" is not found in your data base for any kind of resolution...
Thank you XDA for your kind consideration.

SirhPeter said:
We cannot find the RESOLUTION for this thread...
View attachment 5165337
and this is not a JOKE, my wife's Samsung A50 is not connecting to any wifi network only it's DATA.
We've search this XDA site for the resolution but there were not found.
We would like to remonstrate the right for an SME to help and assist us because the said "JOKE" is not and "Samsung A50 Exclamation beside Wifi signal" is not found in your data base for any kind of resolution...
Thank you XDA for your kind consideration.
Click to expand...
Click to collapse

Hi Everyone!
Most of the time the exclamation point indicates that there is an issue with the wireless connection.
Two things: Router device or ISP issue.
For the router device, you can try to perform a power cycle by unplugging the power source, wait for 3-5mins and plug it back in.
If still the same, call your ISP.

zrockcool said:
Hi Everyone!
Most of the time the exclamation point indicates that there is an issue with the wireless connection.
Two things: Router device or ISP issue.
For the router device, you can try to perform a power cycle by unplugging the power source, wait for 3-5mins and plug it back in.
If still the same, call your ISP.
Click to expand...
Click to collapse
Good day to ALL,
Yes, we had already done the basic T/S and also called the ISP provider.
We are trying to remove from the equation the router and ISP as mentioned from the previous post as the "culprit".
But this is a one way T/S, we are asking what if the Developer of the update from the Samsung A50 may have affected the device itself?
We are all trying to be open and not a one sided T/S. It should be both, that's the principle of trial and error.
We are seeking assistance if the update from Samsung A50 may have an affect with the exclamation beside the wi-fi icon then it should be conveyed since there are a lot of clients bought these devices from Samsung.
And flaws should be fixed by their developers, not the router nor the ISP and even the user who bought the phone.
They already profited from it but what of "US" their customer, their "Bread and Butter" who had their billions with sales of their phones that has a bug with their update.
We are not expert nor programmers but users and customer of these devices.
We are remonstrating the rights of a consumer to it's developer of these devices.
Thank you for your kind consideration...