Develop Bugs

how do you reinstall tilt software

ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync

Go to the bootloader - check the wiki for instructions. Connect your computer to the Tilt - you should see "USB" below the tri-color screen. Install the new ROM or radio. PM me if you have problems.
P.S. The answers to any problems you find are readily accessible in the Kaiser section.

shrshr429 said:
ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync
Click to expand...
Click to collapse
Check the wiki for sd flash. You kan rename the nbh file to KAISIMG.nbh and put it on a sd then goto bootloader and it asks you to install.

im sorry what's wiki and also I can't find software that will let me download the software without activesync does anyone have a link I can use

http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
You should be able to find everything you need here.

i tried everything there, theirs just one problem i cant find a rom that i can use without activesync does anyone have one

When you attach the cable and go to bootloader - does it say "USB" below the tri-color screen? If so, you have communication and can flash.
What do your three lines say at the top of the bootloader (red section)?

it does say usb my computer is reading the phone i just cant find a rom that doesnt use activesync, nothing with RUU_Sign.nbh, i did use hardspl the 3 lines say
KAIS1*0 MFG
SPL-1.0.01iPof
CPLD-8

i do have a microsd card i can try and upload it through their but there is stil the problem with no activesync

so can anyone help me here

ok, since i never really seen this question answered directly anywhere, you get this freebie
how to extract the RUU_Signed.nbh file
If its a cooked rom, the file you download will *usually* be a .rar file, extract the contents with winrar. depending on how the cook packaged it, it may not be named RUU_Signed.nbh, but it will still be a .nbh file
If its an original shipped rom, the file you download will be a .exe file, again, extract the contents with winrar. There will be a bunch of files and the RUU_Signed.nbh will be one of them.

if i downlaod the original rom it just opens up a program to install it how can i extract it without using the program to connect to my phone

omg!!!!!
1. install winrar
2. right click on the file you downloaded
3. choose "extract here"
then do the flashing using the microsd card

Trouble getting t9 keyboard fix to work

i use activeync like everywhere says and put it in the windows folder or my documents and when I click on it it doesnt give me the option to instal anything. It just has a file that says setup and when you click on it it brings up a bunch of wordss and it has a bunch files with random numbers

thegunna37 said:
i use activeync like everywhere says and put it in the windows folder or my documents and when I click on it it doesnt give me the option to instal anything. It just has a file that says setup and when you click on it it brings up a bunch of wordss and it has a bunch files with random numbers
Click to expand...
Click to collapse
are you by any chance extracting the file when you get it? if so, dont...the setup file you are talking about is an xml file...just leave everything in the cab file
take this file as it is (do not extract/unrar), and transfer the whole thing over to the phone and then run it.

still
I put it in as the rar/zipped file and clicked then it opened it and had a file that said start menu and windows I clicked on start menu and it said my tools clicked again and it said extras and then it had another one of those files with random words.So I went back to the windows file and it had the files etp excalibur 1-6 and then a file that said changer.I clicked on changer and it asked what language.After that it said for everything to take effect I need to reboot so I did that and nothing happend.Is there any way to but back on mobile 6.0 its already been like 5 hours of not being able to use the keyboard??

thegunna37 said:
I put it in as the rar/zipped file and clicked then it opened it and had a file that said start menu and windows I clicked on start menu and it said my tools clicked again and it said extras and then it had another one of those files with random words.So I went back to the windows file and it had the files etp excalibur 1-6 and then a file that said changer.I clicked on changer and it asked what language.After that it said for everything to take effect I need to reboot so I did that and nothing happend.Is there any way to but back on mobile 6.0 its already been like 5 hours of not being able to use the keyboard??
Click to expand...
Click to collapse
if you cant install a cab file then maybe you should switch back. its really this simple. copy the file (unmolested) to the phones \windows directory via activesync. then using resco explorer, browse to \windows on your phone and just click on the file..dont open, dont extract, dont pass go and dont collect 200$. it will install. then reboot and THATS IT. we have all done this 100000 times here so im not buying the fact that you are the one off case where it doesnt work.
look in the sticky's at the top of this forum for the wm6 rom

gixxum said:
if you cant install a cab file then maybe you should switch back. its really this simple. copy the file (unmolested) to the phones \windows directory via activesync. then using resco explorer, browse to \windows on your phone and just click on the file..dont open, dont extract, dont pass go and dont collect 200$. it will install. then reboot and THATS IT. we have all done this 100000 times here so im not buying the fact that you are the one off case where it doesnt work.
look in the sticky's at the top of this forum for the wm6 rom
Click to expand...
Click to collapse
LOL "unmolested"... Classic gixx...

Thanks
I appreciate all the help I dont know why it wasnt working whenever I would click it would open the file and show other ones.I still didnt get it to work so Im just going back to 6.0 Does anyone know if there will be an official update anytime for the device or a dummy proof bugless one for guys like me
Im only 16 I guess I need to grow up a little

thanks a lot bro i need it this,major props to you........

[Q] I need some help pls (Htc Tytn II)

Hello guys. I've been trying to instal android on htc tytn II and i can't make it.
i am using the tutorial on sourceforge but i can't do it
at step 16...what should i put at working dir (C) ?
How should i put the fstab at step 11 and 22?
I've searched for answers on many posts but i still can't manage to make it work.
Can somebody please help me?

Also....is there another way to install android? usb mode or something?

blacki3 said:
Hello guys. I've been trying to instal android on htc tytn II and i can't make it.
i am using the tutorial on sourceforge but i can't do it
at step 16...what should i put at working dir (C) ?
How should i put the fstab at step 11 and 22?
I've searched for answers on many posts but i still can't manage to make it work.
Can somebody please help me?
Click to expand...
Click to collapse
i think lets take a look at the picture again :
-[attached]-
for fstab, i leave it "auto", and now incubus work great on my kaiser.
just make a new folder on ur storage(D), or system(C), rename it to "build" (just example, bcos i rename it like that), and put all of ur work an there.
follow all the steps, and ur kaiser will turn to android. if u need more help, just ask me, or the other mate.
hope me answer can help u

i was wondering if i could find somewhere the files i need, so i can just put them on the phone and install

blacki3 said:
i was wondering if i could find somewhere the files i need, so i can just put them on the phone and install
Click to expand...
Click to collapse
u can find all the files u need inside the forum. just try to explore more deep
try to combine all the tutorial how to install android on ur kaiser, it will be great.
start with this : http://forum.xda-developers.com/showthread.php?t=433835
( [Resources] Flashing Your First Kaiser Rom (For Noobs) )
try to follow all the tutorial, but at the number 5 (Download and Flash your Prefered Rom) change ur rom into android rom.
and continue with this : http://forum.xda-developers.com/showthread.php?t=680518
( How to replace Windows Mobile with Android (Guide) )
for me its not a complete guide to install android on ur kaiser, but it just the simple guide.
dont forget to read this note :
Code:
Originally Posted by zenity
If you are experienced at flashing Winmo using KaiserCustomRuu,exe through activesync, then you can do the same with the KAISimg.nbh, just rename it to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, flash as you would with winmo.
(do this thing if u find a problem when u try to install the kernel from SD card)
and then, u can combine the guide/tutorial with this : http://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstallWithAtoolsNand
just read carefully 1st. check all the step. read again, and check again. trial eror.
ps from me : practice make perfect
for the other mate, just correct me if im wrong.
hope my reply can help u.

That are the ones that i was following when i tried to install windows. But i didn't work. Can i just find the files to download from somewhere and just put them on the phone and install? It whould be easier this way

and i have another problem. I have a 2 Gb sd card but i cand only read 1 gb...what could be the problem?

blacki3 said:
That are the ones that i was following when i tried to install windows. But i didn't work. Can i just find the files to download from somewhere and just put them on the phone and install? It whould be easier this way
Click to expand...
Click to collapse
ok, ill give u owl the tools that i use to install android on my kaiser.
try it, but i take no responsibility
1st, download this
Code:
http://bits-=xXx=-hare.com/?f=k1dojuib
(remove the "-=xXx=-") and unzip.
get the hardspl from here : http://forum.xda-developers.com/showthread.php?t=498320
choose the : DaveShaw (.hard)
3.34 Hard SPL nostuckinSPL Force USB
and flash it use active sync. this is the step :
(copy paste from mskip's treat)
Code:
Flashing via ActiveSync with USB Lead
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
5. Connect your phone to PC with a USB cable and wait until it syncs with your PC
6. Run File Explorer on your phone, browse to where you copied JumpSPL1.56-KAIS.exe on your device and run it (make sure the USB cable is still connected). If you get a white screen then reset your device and now try JumpSPL1.93 and lastly try JumpSPL1.94 if that one doesnt work.
7. CLick Continue on phone when prompted
8. After a few seconds the tri colour screen will appear on the phone and "USB" will be displayed at the bottom
9. Unplug the usb cable for 30 seconds and then Replug (phone will not re-sync but still says "USB" on the screen)
10. Right click on the Activesync icon in the bottom corner icon on the computer, goto connection settings, deselect "Allow USB connections" and click "ok"
11. Run the KaiserCustomRUU.exe file on your PC thats in the same folder as the HardSPL .nbh file and follow instructions (ticking boxes and clicking Next) *DO NOT re-enable USB Connections in Activesync*
12. Update will goto 100% (should take less than a minute), the Congratulations screen will be displayed on the PC and the phone will restart
13. Unplug USB cable from phone then REPLACE SIM and SD CARDS !!
14. Restart phone
*Remember to re-enable "Allow USB connections" in Activesync connection settings after a successful flash*
just rename the hardspl file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
---------------------
after that, upgrade ur radio. grab it from here : http://forum.xda-developers.com/showthread.php?t=393182
choose : 1.71.09.01
and rename the radio file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
----------------------
next is ur kernel. use Krazy-Killa's Kernel Release - RLS3 (2.6.32.9).
grab it from : http://forum.xda-developers.com/showthread.php?t=980551
download the Attached Files, androidupdate.tar and KAISIMG-PANEL2-320-TILT1-FROYO.NBH.7z
before install the kernel, dont forget to edit the kernel with atool. choose device to kaiser, resolution to 240x320, version to froyo, panel to 1, and keymap to nornal. and save it.
install the kernel. rename the kernel file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
just keep the androidupdate.tar . we will install it after install the ROM.
if u done, u will see the black screen with a lot of text. and tux on the top of ur screen. wait until the text stop rolling
turn ur phone off, and take ur SD card out.
---------------------
now the ROM. i use Incubus26Jc's Super FroYo 2.2 [Deodexed] [RLS15]. u can grab it here : http://forum.xda-developers.com/showthread.php?t=759894
but u can choose another ROM.
format ur SD card to fat32. make a new folder, and rename it to : andboot
copy the androidinstall.tgz (or u will find androidinstall.tar) to andboot folder on ur SD card.
replace ur SD card, turn on ur phone. when u see the black screen with the rolling white text, hold ur dpad button, until u see the instalation screen. choose 1. install system
wait untill u read the "android instaled" text. (or the same meaning text)
ur android already instaled on ur kaiser now.
----------------------------------
the last step is, turn off ur phone, take ur SD card out, and copy the androidupdate.tar that u download it together with the kernel, to andboot folder on ur SD card. dont forget to delete the androidinstall file.
replace ur SD, turn on ur phone, at the black screen, hold ur dpad, until u find the menu, and choose : 4. Install update
if done, choose : 2. Fix permissions, then quit.
wait, make a cup of black cappucino, grab some sanwich. bcos it will take a long for ur kaiser to reach the android.
i hope me reply can help u.
for the other mate, dont forget to correct me if me wrong.
thx

i cannot instal the kernel...it says...quote: "C:\Users\Bogdan\Desktop\android\RUU_Signed.nbh" (this is an error). I can only choose ok and it exits

blacki3 said:
i cannot instal the kernel...it says...quote: "C:\Users\Bogdan\Desktop\android\RUU_Signed.nbh" (this is an error). I can only choose ok and it exits
Click to expand...
Click to collapse
it wud be easy for me to analyze the eror, if u give me the full eror message.
dont forget to turn off ur phone, and enter the boot loader. camera button and reset ur phone.
or try to rename the kernel file into KAISIMG.nbh
waiting for ur next try

this is the error

and i cannot find hardspl 3.34....when i download it from the link you provided it sais 3.29

actually...this is the error

I instaled the kernel but when i whant to install android it says something like.....failed...no space left on device. what could be the problem?

this is a bootlog

[Q] Error [240] file open This is STUPID

I Read and Read and Read. The surprising part is that, what I need the most there is no video nor any instruction to fix the problem.
I'm trying to flash a ROM on my tilt 2 GSM phone.
I have already HSPL it,
I did task 29 using RhodiumWAdvancedRUU.zip because I couldn't get regular task 29 to work.
Now I get a white screen with HTC on it and it doesnt pass it. So I enter bootloader and make sure that at the bottom it shows USB. (yes I do see SPL-0.85. OliNex)
Now I try to install the ROM and here is where the problem starts.
My ROM:
I dled NRG MAXSENSE ROM which is Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
My Rhodium Update Utility (RUU) is
Rhodium_CustomRUU_v1.1.zip
I Open it and I see
CustomRUU.exe
Here is where I don't know what to do. Some instructions say that I need a .NBH file. Where do I get this file. They say it should be with my ROM.
All I get when I dl the ROM is
Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
Format 7z not .nbh
I get the Error [240] File Open when I run CustomRUU.exe. To fix it they say
"When this error message appears, check whether the downloaded image is placed in the DIRECTORY of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again."
What is the "DIRECTORY" of RUU"? Whats a directory? I never heard that term before.
Of which RUU? CustomRUU.exe?
Do I make a folder and put CustomRUU.exe in it with the Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z ?
Where is the .nbh file? Do I rename the ROM IMAGE to .nbh?
Please give me step by step. Ive read so much already and I dont know what to do anymore. Thank you for your help.

-___- I cannot believe I spent all this time for something so dumb. We should put this on the Help for NOOBS thread. The file " .7z " cannot be opened with Winzip. To open the file you have to use WINRAR. And from there we can see the Rhodium_SoftwareUpgrade.exe (RUU) and the RHODIMG.nbh files. And double clicking the Rhodium_SoftwareUpgrade.exe the software will start walking you through the process for flashing. I think it would be a good idea to add on the HOW TO FLASH A ROM that the 7z file requires WINRAR to be opened.
But thanks to the Lord I learned how to flash the Rom successfully.
--------------------
He who provides for this life but takes no care for eternity is wise for a moment but a fool forever.
-John Tillotson

Or use 7-zip!

-Jonny- said:
Or use 7-zip!
Click to expand...
Click to collapse
Too easy lol

[q] need a non root stock ruu zip

I can't seem to find one anywhere. All the links I am encountering are dead. Does anyone have this file laying around or know where I can get it? My evo is dead right now and from everything I've read this is what I need to get it up and running again. Thanks in advance.

Sorry but, RUU zip? Lol thats like saying you need a JPG word doc.
Anyway, I don't think you searched hard enough, look up "supersonic RUU's" on google, first hit. Download from there, they're hosted on team nocturnals website.

Lol right, been seeing a lot of these lately. And it seems only people who put in the op that they are "noobs" are the only ones who can't find this stuff. But, Phandroid is way worse about this. Which is funny because the sticky at the top of the forum has all the links and instructions to root and unroot every h-boot and hardware version. So what I'm saying is please people just LOOK, it's all you have to do, please.
Sent from my PC36100 using xda app-developers app

you may find the ruu your looking for here.... http://shipped-roms.com/index.php?category=android&model=Supersonic
but the ruu will be a zip
if you want the zip, IE - PC36IMG.zip you will have to extract it.
i just did this exact thing today. i needed the shipped and pre-release ruu for some goodies contained within. followed this guide...
http://forum.xda-developers.com/showpost.php?p=26541170&postcount=1
just rename ROM.zip to PC36IMG.zip instead of PG58IMG.zip
here's the gist of that thread you need to perform.
4.1 Getting PG58IMG.zip from RUU
Run the RUU executable as you normally would, but don't proceed to the second step i.e. when a second window appears, do nothing. Do not proceed, just ignore it for now, but don't close the window.
Right-click the Windows Start button and select "Open Window Explorer" option.
If you use Windows XP
Copy-paste this in the navigation bar:
Code:
C:\Documents and Settings\%USERNAME%\Local Settings\Temp\
If you use Windows Vista/7
Press & hold Windows key on the keyboard and then press R (Win key + R). Once the box pops up, copy paste this:
Code:
%temp%
Right click anywhere inside explorer window (not on any folder) and select Sort by then select Date.
Locate the latest one created (first in the list & it will most likely have random numbers in the name) & open it.
You will find a second folder with a set of random numbers. Open it, inside you will find a number of files and the rom.zip
Copy the rom.zip file to another location.
Now, close the RUU executable folder & rename the rom.zip file as PG58IMG.zip
Click to expand...
Click to collapse