NoRotate is small utility application, that will enable or disable device rotating.
Why would someone want to disable rotating?
Maybe I'm only one that wants this but im using it for 2 main reasons:
I'm mostly using device in portait mode. When i want to type something i have to slide keyboard, type and slide keyboard back. But when i slide keyboard, i have to wait for OS to rotate. Disbling roation makes typing much faster.
Lots of apps dont support rotating or even causes problems on device. For exapmle if you accidentally move keyboard while using MorphGear in RawFrameBuffer mode, device will freeze and you will have to soft reset
Camera key is not working when rotating is disabled. Use "launch camera" button in application to launch it.
Thanks, that`s very usefull for me.
Related
anyone know whether hermes have the software which can make our hermes when sliding keyboard, it will direct unlock the keypad. something like when we press the power button from sleep mode.
any idea?
in kaiser, we have the software while sliding keyboard, it will have sound.
what i want to find is when sliding keyboard, the screen will on.
I'd like too for the Hermes if possible.
I believe it's could not be done.. or extremely difficult.
It is because the keyboard slide is using some magnet to detect and rotate the screen... not trigger by software.
The same goes for the slide and sound...
tugas2khas said:
I believe it's could not be done.. or extremely difficult.
It is because the keyboard slide is using some magnet to detect and rotate the screen... not trigger by software.
The same goes for the slide and sound...
Click to expand...
Click to collapse
yes, but you see the screen rotate, i think it also done by the registry setting.
so what i think is maybe we can just add one more entry at registry there~to make it work~~
dont know can or not,just my imagine~
Not sure if this is what your looking for, but try this post right here
Ive tried editing the registry on my hermes to make the Keyboard SLIDING sounds, and it didn't work.. because our keyboards have magnet sensors as opposed to hardware/software sensors.. So I dont think it will be possible..
thats means the sliding sound keyboard also will not working on hermes?
damn i was hoping i could get keyboard sliding sounds working on the hermes.. it'd be good if there was a way found!
if you download S2U2 from on the forum somewhere it gives you the 'ipod' slide to unlock screen which has a setting to unlock the phone when you slide it open HTH
i was wondering if there was a way to set a particular program to launch in landscape mode as opposed to the standard portrait. i think this would be handy for database files/programs that you just need to bring up and check information.
the particular program in question is KeePass. i sometimes just need to launch it and check a password for something, but in portrait mode, i cant quite fully see 3 columns and usually need to scroll sideways, but landscape would be perfect. unfortunately, i cant really just open the keyboard because the phone is usually in a holster...and i tried assigning the rotate screen function to a hardware button, but it turns it the wrong way. in either case, i was hoping to just cut out the extra step and have it launch sideways by default. any ideas?
I went to my local AT&T corporate retail store to try the Tilt 2 again because the first device I tried at another store seemed slow and not responsive. I had a similar experience this time around too. But I have to believe that most of that can be chalked up to the fact that it has the stock ROM on it and also every noob in the world has messed with it inside the store. But it did leave me with a few questions.
I could not get the screen to go landscape unless I flipped out the keyboard. And when I pushed the keyboard back in it would go back to portrait even though I was still holding it landscape. Is this a setting somewhere? I thought the Tilt 2 had a true accelorometer.
When in the browser I would touch in the URL line and start typing out a www address. But every time i would get a few letters into it and another text field would open at the bottom and start intercepting my typing. Anyone know what that is?
While the Tilt2 is equipped with an accelerometer, TouchFLO itself is not designed to re-orient itself in landscape using just the accelerometer.
That being said, some applications do go into landscape mode when you turn it with the keyboard closed. The Windows Mobile SMS application, some versions of Opera, and other various apps. Otherwise, to "force" landscape the keyboard needs to be open (or use some 3rd-party app/tweak).
Also, out-of-the-box, the stock ROM is actually pretty responsive and fast. Its one of AT&T/HTC's better built stock ROMs out there. Of course there is always room for improvement. I suspect the slow/unresponsiveness is due to the fact that its a demo unit thats already been messed with.
As for the additional text field in the browser, I have no idea what that is. Only thing that pops up normally during normal browser usage is auto-complete that makes URL suggestions.
ChasDun said:
I could not get the screen to go landscape unless I flipped out the keyboard. And when I pushed the keyboard back in it would go back to portrait even though I was still holding it landscape. Is this a setting somewhere? I thought the Tilt 2 had a true accelorometer.
Click to expand...
Click to collapse
You can use G-Config (available here on xda) to add programs (including TF3D and the Start menu) to the sensor database. Works great!
I have mapped one of the hardware buttons (long press on the answer key) to rotate the screen. Find it better than auto rotate depending on the orientation.
hey guys...greetings...
I know all of you are geniuses here, so hopefully someone will be able to help me.
I'm working on a application for the TP2, an tht requires a landscape mode.
Now i am able to launch the program in landscape mode, but the problem is i am unable to catch keyboard slide events. What i mean here is the managed code rotates the screen initially,but, if a user slides the keyboard back in, the screen goes back in the potrait mode, thereby making the application throw an exception.
I tried with the reg values
HKLM->SYSTEM->GDI-> ROTATION
HKLM->SYSTEM->KEYPAD->ISSLIDEOUT
But i seem to be going nowhere. The Screen rotates to potrait, my application throws an exception, and the program quits.
Cant i do something tht the system wont detect a keypad slide?
Cos everything i'll be doing is via touch interface. i wont require a hardware keyboard.
If anyone can help, will appreciate it
Anyone here using scummVm on the tilt2 or tp2? My problem is that I cannot figure out how to get the screen orientation to work properly when the keyboard is open. What I mean is, anywhere I click, the cursor shows up at the mirror location on the device if the keyboard is not closed. It doesn't matter If I have the screen orientation lefthanded (default on this device) or flipped so it is right-side up with the keyboard open. Very frustrating.This isn't too much of a problem for point-n-click, but I would like to map keys, and opening the keyboard inverts all click points on the screen so the game becomes unplayable.
Currently the only workaround I can find is to have the keyboard open before starting scummvm (which is contrary to the tutorial). Closing it and opening it during gameplay brings back the original issue. I'd really like to find a way to open and close the keyboard without having issues. I'm hoping someone else with a tp2 has encountered this issue and knows how to deal with it!