question to the chefs regarding ext packages - Touch Diamond, MDA Compact IV ROM Development

hello fellow chefs
i am building blackstone roms for the moment and i can get ext packages from leo and use them
now i wanna make diamondrom whit the rhodium sense 2012
i have found threads whit vga poorts but it only has the manilla packages
as only manilla packages isnt enough to create a rom i am aksing you where you got all the other packages:-o
is there a thread that has all packages in one rar or 7z file and not only manilla files
i have been looking for quite some time now whitout any succes
can anybody point me in the direction where i can get all ext packages or can somebody uplaod al ext packages to make it work whit sense 2012
if a mod thinks it a inapropiat thread delete or close it
hope some one can help me out
best regards
chris

Related

How can I extract a software from a rom and make a cab?

I would like to extract a software (Htc media hub) and all neccesary files that are needed to create a working cab from this rom http://forum.xda-developers.com/showthread.php?t=304706 Can any1 help me out with this or guide me how to do it. The cab shall be installed on a Trinity. Forgive me for asking here in the hermes forum but I ask in this forum cos it seems like here are all the people that knows this kind of stuff. Please
somone might end up correcting me on this one. You will need a ROM kitchen to do that. Unfortuantely, ROM kitchens are usually only native to a couple devices, and I am not sure if hermes tools are compatible with your trinity. what you can do is check out the tools in the hermes section of the wiki here. usually tools that are posted in the wiki have links to the original threads where they were posted. good luck!
btw that windows media today plugin is pretty sweet!

Artemis Diamondish 6.1 Build 20721.1.4.0 + Build 20273/19965 (ROM + Kitchen)

Hi,
I would like to share the kitchen that I use to build my personal ROM. It's SYS and XIP were ported from the stock Diamond 1.93.456.2 WWE ROM that Tom made available and the kitchen is Bepe's kitchen.
Here it is (Build 19965.1.2.3):
http://rapidshare.com/files/130210385/Artemis_Diamondish_6.1_Build_19965.1.2.3.zip
UPDATE1: I have made a few changes in the OEM folder, I have added Advanced Config, added a patched htc home for the weather and made some changes to the registry. The changed files are in the attached zip.
Pre-Built ROM (NBH) can be downloaded from here:
http://rapidshare.com/files/130466202/Artemis_Diamondish_6.1_Build_19965.1.2.3_NBH_ROM.zip
(Usual rules for cooked roms, i.e. USPL etc.. - http://forum.xda-developers.com/showthread.php?t=331845)
UPDATE2: I have uppdated the XIP and SYS to use build 20273.1.3.3 and use .NET CF 3.5 as suggested, thanks xvx45
Pre-Built ROM (NBH) can be downloaded from here:
http://rapidshare.com/files/133908594/Artemis_Diamondish_6.1_Build_20273.1.3.3_NBH_ROM.zip
Kitchen:
http://rapidshare.com/files/133917390/Artemis_Diamondish_6.1_Build_20273.1.3.3.zip
UPDATE3: I have uppdated the XIP and SYS to use build 20721.1.4.0
Pre-Built ROM (NBH) can be downloaded from here:
http://rapidshare.com/files/142121757/Artemis_Diamondish_6.1_Build_20721.1.4.0_NBH_ROM.zip
Kitchen:
http://rapidshare.com/files/142132785/Artemis_Diamondish_6.1_Build_20721.1.4.0.zip
Fix for the SMS inbox issue can be found in post #99 http://forum.xda-developers.com/showpost.php?p=2616507&postcount=99
Here are some screen shots (of build 19965, mainly the same as build 20273 and 20721 but version numbers changed):
Nice work bro, nice to see new "faces" on Artemis forum.
Cheers.
Thanks, been here a while, just learning as I go. I thought it was a bit quiet on the new ROM front.
Thank you very much for you sharing!
Maybe this was the push i needed to start also cooking.
Who knows...
Cheers
Thanks for share man!
Do you have some screenshots of this ROM?
INFO
Hi,
Just extracted, saw all the separate files, did i miss the full .nb rom image or is this post to cook yourself with the htc romtool?
I know there are a look of cooking-guides, but can anyone explain simple which files tot select from the extraction when running the htc rom tool you have to fill in :
G3 IPL
G4 IPL
SPL
Splash
Radio Ext.Rom
OS
Can i add also .cab files for example somewhere to add to this rom?
Would like to cook first rom.
Thanks,
Innovator
Hi, just run the batch file "BuildNB.bat" and that will generate the .nb and .nbh files, they were removed to reduce the size of the archive.
You may also need to install the VC8 Runtime first, that can be found in the archive:
"tools\vcredist_x86.exe"
There is a tool from Ervius (I think that it is called "packages creator") that will convert cabs to OEMs suitable for cooking with.
Thank you mate, I'll try to make it compatible with Orange France SPV M650 AGPS
Maybe my starting element to come with Artemis community more often (actually my phone but Icook on my old Prophet at this time).
Good job
Hey guys,
This seems promising. I've just installed Tom's latest but have been troubled by bugs (it happens) since he's no longer responding to queries I decided I needed to learn to cook one myself (should be fairly straightforward).
Perhaps we should pool experience & resources and work together, I mean if you look at the activity in the Kaiser forum, you'd be forgiven for feeling a bit left out.
One person could design gfx the other sounds etc. Otherwise I might swap my Artemis for a Kaiser (yes I've been begged!!)
Forgive me if this seems like a pipe dream...
More screen shots....
Here are some more screen shots:
daniel.bigred said:
Hey guys,
This seems promising. I've just installed Tom's latest but have been troubled by bugs (it happens) since he's no longer responding to queries I decided I needed to learn to cook one myself (should be fairly straightforward).
Perhaps we should pool experience & resources and work together, I mean if you look at the activity in the Kaiser forum, you'd be forgiven for feeling a bit left out.
One person could design gfx the other sounds etc. Otherwise I might swap my Artemis for a Kaiser (yes I've been begged!!)
Forgive me if this seems like a pipe dream...
Click to expand...
Click to collapse
I agree, it would be nice to have an "open" ROM that the community contributes to, I hope that this would keep the Artemis platform alive for future releases of Windows Mobile.
P3350
Hi all... i am very new to cooking and still thinking of getting my feet wet... have a couple of questions...
1. I have a P3350 (Artemis with out GPS) and when i install all these roms they are sluggish when compared to P3300s. My friend has a P3300 and the same ROM is fater ... I tested it immediately after flashing by opening the windows folder and other apps... should i be doing any thing different to get my device up to speed?
2. The ROM on the rapid share (http://rapidshare.com/files/13046620....3_NBH_ROM.zip) is this a directly installable ROM?
3. What should i be doing with the 'changed files'.
Sorry if i am sounding noob...
veereshpm said:
1. I have a P3350 (Artemis with out GPS) and when i install all these roms they are sluggish when compared to P3300s. My friend has a P3300 and the same ROM is fater ... I tested it immediately after flashing by opening the windows folder and other apps... should i be doing any thing different to get my device up to speed?
Click to expand...
Click to collapse
I don't know of any, but I am looking into a similar issue that I see with my orbit, I think that I am going to look at the XIP region of the ROM to see if there is something device specific there, sorry for not being much help.
veereshpm said:
2. The ROM on the rapid share (http://rapidshare.com/files/13046620....3_NBH_ROM.zip) is this a directly installable ROM?
Click to expand...
Click to collapse
Yes, this contains everything but assumes that your device is already running the SPL and only contains the OS portion and not the radio. Look at the link in the first post for help on flashing cooked roms.
veereshpm said:
3. What should i be doing with the 'changed files'.
Click to expand...
Click to collapse
These files in the zip should replace the existing ones in the kitchen on rapidsahre.
veereshpm said:
Sorry if i am sounding noob...
Click to expand...
Click to collapse
No problem, we were all like that, I am still learning as I go.
please inform - this pre-built rom, what is it contains of?
set of programms, etc...
And what about memory leaks?
Thank you
Freshup Roms...
Good try for this new rom, but i find the home-skin not stylish enough (dated too soon).
Why not create a rom with Greatball's today screen, see http://forum.xda-developers.com/showthread.php?t=402021
This is the most stylish skin (with SPBMobile 2.1) i have ever seen (last one with analog clock).
Together with Greatball's Samurai Diamond Weather + Night
http://forum.xda-developers.com/showthread.php?t=402124
Would be the most fresh looking rom ever
In combination with latest msn, SPB-backup,PPCBackupcontacts,...
Who can do this & freshup our Artemis for a long time ?
Thanks,
Cheers!
Innovator
mpattman said:
Hi,
I would like to share the kitchen that I use to build my personal ROM. It's SYS and XIP were ported from the stock Diamond 1.93.456.2 WWE ROM that Tom made available and the kitchen is Bepe's kitchen.
Here it is:
http://rapidshare.com/files/130210385/Artemis_Diamondish_6.1_Build_19965.1.2.3.zip
I hope that it will be useful to some of you.
Matt.
UPDATE: I have made a few changes in the OEM folder, I have added Advanced Config, added a patched htc home for the weather and made some changes to the registry. The changed files are in the attached zip.
Pre-Built ROM (NBH) can be downloaded from here:
http://rapidshare.com/files/130466202/Artemis_Diamondish_6.1_Build_19965.1.2.3_NBH_ROM.zip
(Usual rules for cooked roms, i.e. USPL etc.. - http://forum.xda-developers.com/showthread.php?t=331845)
Here are some screen shots:
Click to expand...
Click to collapse
When an Italian version?
I have no plans to produce any other languages, but the source to the kitchen is all there for someone to translate to suit thier needs.
Ok, I've tested and make my first Artemis ROM (for test use for the moment).
I've been implemented Orange AGPS drivers but no luck no automatic connexion at the moment when GPS is activated so, I'll make more try. So I've removed some components (Adobe flash & reader, Diamond Keyboard and some little thing) that I don't want and this ROM is stable and fast...very fast coocked with NETCF3.5 Now I'll translate it to French if I've time to that more than my future release
Just one thing mpattman : why to release this kitchen with NETCF 2.0 and not directly 3.5 ?
And the last Word : Thank you mpattman !!!
I can not down your ROM and MYkitchen,please get it to FTP,thank you.
Thanks a ton...
Thanks MPattMan...
I am downloading the kitchen, and will try understanding stuff... will post if i have any doubts... do u have any guide on how to do stuff like adding the programs that i want ? ... i will be more than willing to help, test and learn.

How to decompile Herald/Wing ROM to folder format

I'm kinda new to ROM extraction and cooking but have managed to use a few usefull tools to do what I need with my Titan ROM's. My question is, how could I extract a herald or wing rom to folder format. Meaning like used in a kitchen. There are a few file (icons and such) I would love to integrate into my Titan ROM's but I just don't know enough about these ROM's to do what I need. One very usefull tool I use on my Titan ROM's is Dogguys Kitchen Maker but it errors on these ROM's I'm trying to rob parts from.
Any help would be greatly appreciated!!

Extracting CAB from ROM

Sorry for this NOOB-Question... I really tried it by myself!
Didnt find the solution i was looking for,....
I simply want to have certain CAB out of different ROMs.
There are many nice ROMs here in the Forum... and all are a little different ...
Now i like to have one cab from ROM "A","B", "C"..and install it on together with ROM"X".
But how do I get the CABs out of the ROM?
For Example HTC Connetction Setup out of the Bepe 0.99d or Duttys_Diamond V1.8 to install it in the DIAMOND ROM V3.3
I found some "How to Cook"- Guidelines.. but none of them helped me getting the Cabs?! Did i make a mistake?? Or isnt it that easy?
Would be nice if you could help me out with that?!
And no.... the HTC ConnectionSetup_CAB you can find here in the Forum isnt working on my device... but the one in Bepes Rom is doing his job.
Thank.. and again sorry..
Bobo
Use CeCmd (attachment).
Copy it to your device, run it, adjust the file properties (show hidden and ROM files).
Choose the files you want (search the windows folder) and copy it to a (in advance created!) folder of your choice.
Thanks...
..it worked... Now I can pick out the CABs I like from the ROMs I like and install it into my favorite ROM! GREATING THE BEST ROM IN THE MILKYWAY!! UUUAAAHH!!
Thanks again!!

[REQUEST] Need kitchen for Asus P750

Hello to the land of Gurus!
I have been looking for a kitchen to create custom ROM for Asus P750. The problem with current VGA ROMs is there is very little memory left to run programs (only 20 MB or so). I want to take one of these ROM and strip it down to bones and get rid of ext ROM to leave some more headroom for programs to run.
I need a kitchen for it. Can any one of you please help acquire the same?
Here kitchen, but only QVGA
http://asusmobile.ru/files/ROMs_P750/not_official/ASUS.P750.WM6.1.20759.1.4.2.QVGA.zip
More read ( on russian ) - http://asusmobile.ru/board/viewtopic.php?t=14829
Many thanks!

Categories

Resources