Develop Bugs

stock roms

Got an unbranded deisre which i have rooted, and installed defrost 1.6c. Can anyone point me towards what stock rom I would need to put it back the way it was originally.
If I did put the stock back on would it still be rooted?
Bootloader was 0.80 when i upgraded.
Had a look at the stock and confused as which one i would need.
OTA_Bravo_HTC_WWE_1.21.405.2-1.15.405.4_release_P4ohim1mtp6zggcyon.zip
Does this look ok?

memphisuklf said:
Got an unbranded deisre which i have rooted, and installed defrost 1.6c. Can anyone point me towards what stock rom I would need to put it back the way it was originally.
If I did put the stock back on would it still be rooted?
Bootloader was 0.80 when i upgraded.
Had a look at the stock and confused as which one i would need.
OTA_Bravo_HTC_WWE_1.21.405.2-1.15.405.4_release_P4ohim1mtp6zggcyon.zip
Does this look ok?
Click to expand...
Click to collapse
On this thread http://forum.xda-developers.com/showthread.php?t=695667
It shows all the stock ROMs, you must of been on the lateset one if your are on bootloader 0.80.xxxx
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe would be the one you need if you want to do it from the computer or OTA_Bravo_HTC_WWE_1.21.405.2-1.15.405.4_release_P4ohim1mtp6zggcyon.zip if obviously pushing
Yes you would lose root if you applied any of them

cheers for the reply,
pushing would mean doing it through rom manager into custom recovery wouldn't it and then wipe and installing it. Do i just put this rom on the root directory on my sd card and rename it update?
This then would put it back to its natural state and voiding warranty wouldn't it?

shoey-n said:
or OTA_Bravo_HTC_WWE_1.21.405.2-1.15.405.4_release_P4ohim1mtp6zggcyon.zip if obviously pushing
Click to expand...
Click to collapse
Don't use that one, it's an OTA update from 1.51.405.4 to 1.21.405.2. It contains only the changes between these two stock roms. I'd bet that'd really mess things up installed on top of defrost

Download this:
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.exe
It's the full 1.21.405.2 ROM, you will need to go back to a Sense ROM to run it though as you need HTC Sync...OR run this from recovery
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.zip
and it should do the same

memphisuklf said:
cheers for the reply,
pushing would mean doing it through rom manager into custom recovery wouldn't it and then wipe and installing it. Do i just put this rom on the root directory on my sd card and rename it update?
This then would put it back to its natural state and voiding warranty wouldn't it?
Click to expand...
Click to collapse
Putting the RUU ROM will put it completely back to normal restoring your warranty
Sent from my HTC Desire using XDA App

which one would i go for then and what procedure would I use. Any help appreciated.

ignore this post

Eddy, sorry a little confused.
I am on Defrost 1.6c at the moment. If I run the 1.21.405.2 stock from your second post in recovery, will that take me back to where I want to go?
EddyOS said:
Download this:
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.exe
It's the full 1.21.405.2 ROM, you will need to go back to a Sense ROM to run it though as you need HTC Sync...OR run this from recovery
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.zip
and it should do the same
Click to expand...
Click to collapse

The 2nd link (the ZIP) should flash you back to stock...if you wanna use the full RUU you'd first need to go back to a custom Sense-based ROM (like MCR v3.1)

EddyOS said:
The 2nd link (the ZIP) should flash you back to stock...if you wanna use the full RUU you'd first need to go back to a custom Sense-based ROM (like MCR v3.1)
Click to expand...
Click to collapse
Sorry new to all this. Tried the second link zip which I put on my SD card. Then went into recovery with rom manager, erased and then tried to flash the zip from SD card but kept on getting an error.
Am I doing something wrong?

Bump
Sent from my HTC Desire using XDA App

[Q] Problem in bootloader? + want to restore to stock rom

Hi guys
I installed a few custom roms into my dhd in the last few days. I had to downgrade to the 1.3X version of stock rom to do this. I got tips from the xda post.
After this whenever i go to bootloader, i see that the
bootloader is searching for the ruu rom. If i put the ruu zip file in sd card, it will try to do an install. Is there something wrong with my bootloader? Please advice.
I also want to try and restore the phone to the stock condition. (No gripes with custom roms. Just want to give this a try) Will an ruu flash the old recovery back in? Or should i do this seperately? And what about the radio? Will it come with ruu?
I use a goldcard now. Will it void my warranty if i dont remove it? I dont have ruu roms specific to india with me.
Please help me out. Searched the forum but :-(

evolutiontheory said:
Is there something wrong with my bootloader?
Will an ruu flash the old recovery back in?
Or should i do this seperately?
And what about the radio? Will it come with ruu?
I use a goldcard now. Will it void my warranty if i dont remove it?
I dont have ruu roms specific to india with me.
Click to expand...
Click to collapse
1-maybe not, only that u need to re-name the file to "update.zip" or pd98img.zip..
depending that you want to do..
2-yes, an original ruu flashes the originalk recovery...(u can´t do anything in this recovery...)
3-radio not comming with the RUU or with a custom rom... you should to flash it apart... via fastboot or with a tool..
4-goldcard don´t removes your warranty... its maded into the sd card- remove it or format... and gold card dissapears
5-If u don´t found An official RUU for your country... always can enjoy the WEE ruu (generic) without problems...

Thanks Sergi.
But why is the bootloader searching for the zip? I think the downgrade process caused this issue.
Or will all bootloaders search for the zip?
How did you get the name pd98img.zip? My bootloader is indeed searching for this zip file! I never mentioned it in my post
edit:: A few more hours in the forum gives me the impression that all bootloaders will search for this file. Am I right?
Also the RUU has a radio in the name of the file. Should I flash this radio seperately using fastboot?
I see a link to RUU PD98IMG_Ace_hTC_Asia_India_1.84.720.3_Radio_12.28g .60.140f_26.05.05.27_M3_release_175158_signed.zip. Why is the radio name in the file? Will it have the radio inside or should I flash the same radio separately?

I installed RUU_Ace_HTC_WWE_1.32.405.3_Radio_12.28b.60.140e_26.03.02.15_M3_release_155032_signed and you know what. Even the radio got changed!!!

evolutiontheory said:
I installed RUU_Ace_HTC_WWE_1.32.405.3_Radio_12.28b.60.140e_26.03.02.15_M3_release_155032_signed and you know what. Even the radio got changed!!!
Click to expand...
Click to collapse
AAAH ok ok you tried an .exe pack... I forgot to tell you that this is the exception.. sorry... This RUU'S goes with his own recommended radio... Are the original htc roms pure..
sent from my amstrad CPC powered by LOL..(premium xda)

And yes.. bootloader always search pd98img...but then shows you the menu true??its normal.. this file can reflaah your phone if anything goes badly...
sent from my amstrad CPC powered by LOL..(premium xda)

Yes all set!!
what I did was to flash with a 1.32(non indian) version first, temp root it, then remove the radio S OFF.
Then I flashed it with the 1.84 indian version, and all set!!
Thank you!!

One more question, will the RUU exe flash the kernel as well?
Another question too.. Will multiple flashing and reflashing harm the phone in anyways?

CyanogenMod 7 to original ROM

can i move from CyanogenMod 7 to original android 2.2 ROM for wildfire?
if so can any1 pl guide me how to do this?
regards

If you had taken a Nandroid Backup of your stock ROM, restore it.
If you hadn't,Run an RUU's from here:
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
One more alternative - Flash a Safe Zip RUU from here: (Post #1. Point 5A)
http://forum.xda-developers.com/showthread.php?t=1029318

thanx for the help

Beware !
Do keep in the mind that the latest 2.2 official RUU floating around might turn the S-ON on ur device.
Effectively unrooting it.
And then you would have to resort to Clip or Alpha method to root it again.
Ask me, it's a pain in you-know-where

pulz said:
Do keep in the mind that the latest 2.2 official RUU floating around might turn the S-ON on ur device.
Effectively unrooting it.
And then you would have to resort to Clip or Alpha method to root it again.
Ask me, it's a pain in you-know-where
Click to expand...
Click to collapse
Agreed. Here's a safe update.zip, both rooted & not rooted : (disclaimer: I didn't test it) :
http://forum.xda-developers.com/showthread.php?t=877977
Alternatively, you can extract system.img and boot.img from the rom.zip you can find in your %TEMP% after you exec an official RUU, an flash those with the flash_image command-line tool in clockworkmod.

3xeno said:
If you had taken a Nandroid Backup of your stock ROM, restore it.
If you hadn't,Run an RUU's from here:
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
One more alternative - Flash a Safe Zip RUU from here: (Post #1. Point 5A)
http://forum.xda-developers.com/showthread.php?t=1029318
Click to expand...
Click to collapse
i have downloaded two ROMs from the link 2 (Post #1. Point 5A)
1- Buzz_Froyo_hTC_Asia_India_2.25.720.1 -
2- Repack of the chinese RUU, Android 2.2 Froyo Rooted Chinese apps removed
after extracting the zip file i didnt see any exe file to run. i can only see folders named "META-INF" and "system" and boot.img file.
do i need to install this ROM the same way i did for installing CyanogenMod or is there any other way to do so.
thanx

Flash that .zip file, don't extract it.

Install like Cyanogenmod, and, I personally dont recommend using the Chinese RUU.

how about this link
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
can i install any of the ROMs by running RUU exe file only.

Yes, you can. Any RUU beginning with 1.x is an Eclair ROM, and with 2.x is a Froyo ROM. Just choose a WWE ROM and not any carrier branded one.

i have downloaded and installed the following ROM
RUU_Buzz_Froyo_hTC_Asia_TW_2.24.709.1_Radio_13.55.55.24H_3.35.20.10_release_161114_signed
but its wifi is not working. wildfire detects wifi router and shows connectivity but there isnt any browsing, email, youtube doenst work.
pl guide

cheekugr8 said:
i have downloaded and installed the following ROM
RUU_Buzz_Froyo_hTC_Asia_TW_2.24.709.1_Radio_13.55.55.24H_3.35.20.10_release_161114_signed
but its wifi is not working. wildfire detects wifi router and shows connectivity but there isnt any browsing, email, youtube doenst work.
pl guide
Click to expand...
Click to collapse
i any1 pl guide me which ROM (from the below mentioned link) is the best to download and installed for mobile service provider in pakistan.
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz

error up rom ship

When I re up Rom ship, i see this error (attachment)
How to fix this error?
I download and flash rom RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
Sr my English not good

thats for an unbranded phone
is yours branded? (or what version are you running at the moment? the x.x.405.x normally gives it away)

Create a goldcard:
http://android.modaco.com/content/software/308798/pc-application-goldcardtool/
Put this in your desire and then flash ruu again.

MatDrOiD said:
Create a goldcard:
Put this in your desire and then flash ruu again.
Click to expand...
Click to collapse
I Have created GoldCard and S-off.
I don't know area of my Phone to be download romship correct.
Sr my English not good

Lothaen said:
thats for an unbranded phone
is yours branded? (or what version are you running at the moment? the x.x.405.x normally gives it away)
Click to expand...
Click to collapse
my version (Attachment)

Just flash the ruu you already downloaded again, only this time with goldcard in your desire.
Sent from Oxygen with Transparent XDA App

I flash again but was so.

Mountain8x said:
I flash again but was so.
Click to expand...
Click to collapse
What was so? Which error appeared when you flashed the ruu witjlh goldcard in your desire?
Sent from Oxygen with Transparent XDA App

As stated above several times, that error is normally produced when trying to flash a stock ROM on an branded phone (without a goldcard).
To be on the safe side, create it again. By far the easiest method is here: http://forum.xda-developers.com/showthread.php?t=954723.
Simply create your goldcard, patch it to your memory card & run the RUU again.

The error i have posted on the post #1.
Sr my English not good

Make new goldcard with: http://forum.xda-developers.com/attachment.php?attachmentid=517948&d=1297736477

Thanks everybody
I done
I use other SD card

[Q] Request for HTC Desire V T328w China Unicom ROM ver 1.56.1402

Does anyone have ROM version 1.56.1402 of HTC Desire V T328w China Unicom, please share. I have this version install on my device (HBOOT already updated to 1.14.0002).
My current rom is error by missing notification bar when I try to instaff gapps_201204xx to the rom, and bacause I failed to make backup before flash, now I want to revet it back to original rom.
I have try to flash the previous leaks rom 1.35.xxxx, but have no luck by both using RUU or PL111IMG.zip. (even I have done reverted recovery back to stock and relock).
Please kindly help me.

why don't you try to use the taiwan ROM, it comes with gapps

bigjimmy546 said:
why don't you try to use the taiwan ROM, it comes with gapps
Click to expand...
Click to collapse
it doesnt look like the taiwan ROM is flashable on mainland chinese version of t328w because of CID difference.

That's exactly the point!
I am trying to flash a Taiwan version of the ROM. But becouse of this SID difference, I'm unable to do it.
Any good soul knows how to do it? Bypass, change or fix this SID difference issue?
Best regards,

you need to flash a china version, then replace the rom and boot file with the taiwan rom

SokRatha said:
Does anyone have ROM version 1.56.1402 of HTC Desire V T328w China Unicom, please share. I have this version install on my device (HBOOT already updated to 1.14.0002).
My current rom is error by missing notification bar when I try to instaff gapps_201204xx to the rom, and bacause I failed to make backup before flash, now I want to revet it back to original rom.
I have try to flash the previous leaks rom 1.35.xxxx, but have no luck by both using RUU or PL111IMG.zip. (even I have done reverted recovery back to stock and relock).
Please kindly help me.
Click to expand...
Click to collapse
what u need to do is the following:
1) *skip this step if your phone is still locked* if you have unlock your bootloader, you need to relock it using the same tool that unlocked the bootloader
2) download the RUU version of the original ROM. RUU_PRIMO_DS_ICS_40A_HTCCN_CHS_CU_1.35.1402.1_Radio_1.04.34D.11_20.11.30.11U_release_256137_signed.exe
address is here:
http://dl.dbank.com/c0ys4u58d7#
3) go into fastboot mode, and execute the RUU file.
4) follow the steps and your phone should be back to original factory states.
the thing to make sure: your bootloader needs to be locked to flash RUU.

cezent said:
what u need to do is the following:
1) *skip this step if your phone is still locked* if you have unlock your bootloader, you need to relock it using the same tool that unlocked the bootloader
2) download the RUU version of the original ROM. RUU_PRIMO_DS_ICS_40A_HTCCN_CHS_CU_1.35.1402.1_Radio_1.04.34D.11_20.11.30.11U_release_256137_signed.exe
address is here:
http://dl.dbank.com/c0ys4u58d7#
3) go into fastboot mode, and execute the RUU file.
4) follow the steps and your phone should be back to original factory states.
the thing to make sure: your bootloader needs to be locked to flash RUU.
Click to expand...
Click to collapse
This instruction I have follow many time already, but no luck.
I guest this only work when our device not yet receive 1.56.xxx OTA update. When we receive such this OTA update, our bootloader has been updated to 1.14.0002 which is newer then the 1 in the ROM you suggested to me. Finally, the update is failed with a report "HBOOT is older, update failed".
Anyway, really thanks for your great time for suggesting. And till now I have found solution on this issue, is that you could use the, what they called mini-RUU of China ROM (it's also same version suggested above, without HBOOT, and some other part of image file). Using flash zip file method in recovery mode, it work and you need to update software after complete flashing.

bigjimmy546 said:
you need to flash a china version, then replace the rom and boot file with the taiwan rom
Click to expand...
Click to collapse
Could you clearly explain what to do?

SokRatha said:
My current rom is error by missing notification bar
Click to expand...
Click to collapse
this is because old Kernel is used. I've got the same problem when played with roms on my device.
Try to unpack boot_signed.img from rom.zip of original RUU and flash it via fastboot
fastboot flash boot boot_signed.img
This should help.