Im using DeepShining X4 rom. all of a sudden when i was switching tabs, my phone froze, so i soft reset and it would get past the Touch Pro2 screen.. i left it for at least 10 minutes and nothing. so i reset it again.. again.. 3-4 times, with the same result.. idk why, but i went into bootloader mode [vol down+power+reset] got the tri color screen, and found no hard reset option so i naturally soft reset.. this time, i got past the Touch Pro2 welcome screen and it went on to the other two welcome screens, but stops at the windows one.. wtf is going on?! how can i flash another rom without accessing my files?? alsdkjflaskdj. someone please help, im freaking the eff out.
You don't need to flash a new ROM, just hard reset manually. Turn off the device completely (yank the battery if necessary). Now, press the power button, the send key, and the end key all at the same time. You should get a prompt instructing you how to hard reset. Follow the instructions and you'll be fine.
Somehow your windows has become corrupt. It is digital media afterall and it does happen. No need to freak out. You will get through it.
As DaveTheTytnIIguy said pull the battery, let sit a few minutes, reinstal and then while holding the end and send buttons at the same time push the power button. Follow instrucions on the screen. I think it says push volume up to do a hard reset.
You will loose any apps and files that were stored to the phone. Anything from the SD card will be fine but will have to be reinstalled to get it working.
If you made a backup of your phone you could now load this and then everything would be back to the way it was. This is why I do weekly backups and load everything to storage card. It also helps to backup the storage card once in a while as they have been known to go bad as well.
Related
Hi, All
I just tried the WM6 for x51v last night, but my x51 can not boot up any more. The SD image loader processed the image loading without any error and when it asked hard reset, I did right as it said. But after I saw the hard reset screen, which showed "press contact key to restore, press message key to cancel". I tried both keys in diferent hard reset, no one works. The screen got dark again without anything displayed. I waited over 5 minutes to see anything happen. But nothing.
Now the x51 only can show hard reset screen, can not power on. And can not run SD image loader again. Anyone here has any idea about how to solve the problem? Thanks in advance.
i got myself a jasjar couple days ago.
but the device keeps rebooting/reseting every 15min. or whatever.
so i tried to update the rom version with a more recent one.
however ... now my device doesn't do anything at all.
it's frozen at the bootloader if i'm correct.
only thing it displays is 'serial' at top of the screen and 'version 1.00' at the bottom.
i tried a hard reset, soft reset.... always ends up back at this screen.
could anyone plz help me?
Sounds like you just need to reflash your device. Use this ROM: http://forum.xda-developers.com/showthread.php?t=319838
Unpack the zip file and run the MaUpgradeNoID file.
---
i've done that. but the phone keeps rebooting.
just after spash screen the screen goes black.
is there a way to backup my current radio/ext rom etc.?? so i can restor?
i have the WM ultimate as suggested, but keeps rebooting.
i tried a hard reset, which sometimes helps.
but when i disconnect my charger/usb cable the phone goes off within a few secs.
i tried with 3 batteries, all result the same so can't be that i think.
As my understanding your device doesnt boot as long you are pluged to power isnt it? if I am right try this:
clean the contact point of your battery and contact clips on your device (golden clips) use a pcb board cleaner
lets say the power is at 90% but wouldn't boot.
but when connected with usb/power it does load, and needs to stay connected till the 'enter pin'-screen prompts.
i think this issue is related to an unstable mix of rom/ram/radio information.
after i tried some custom cooked images everything seems fine
I have a problem with my Tmobile MDAIII compact.
It dropped on the floor last week, the battery fell out and everything.. and after that it just hangs in the windows bootscreen.
Opened it up to see if there was any visible damage inside, but found nothing.
When I turn it on the screen shows:
IPL 1.12.0001
SPL 1.11.0001
GSM 03.21.90
OS 3.7.0.0
then it gos to the windows mobile splah/bootscreen
I have the PDAviet black and blue v4.0 touch ROM on it..
sof reset doesn;t work, it will just get stuck in the bootscreen again. if you touch a button it lights up the screen and keyboard, but even that stops responding afer a couple of minutes.
a hard reset is not an option right now cause I can't afford to lose my contacts and notes
flashing is not an option for the same reason.
had anyone here got any idea how to get this working again without a hard reset or a new flash..
I read that you can do more harm then good if you just use some commands you find, cause every bootloader has different commands so I carefully tried some MTTY commands in the bootloader, but in the end it didn't do anything. good or bad..
Is there a way to see where it hangs or gets stuck through some output console with MTTY or something? or get the contactlist out of it or the notes..
I SO cannot afford to lose my contacts or the notes in the damned thing. ( yes, I all hear you say " you should've backed up then!!" but hindsight is always 20-20 )
is it bootLOOPING or is it just hanging on the bootscreen?
if it's bootlooping try removing your SD card and then soft resetting
if it's hanging, your guess is as good as mine
It's hanging in that bootscreen/PDAVIET splash, it's not looping.. it just sits there mocking me..
There is no SD card present and no SIM either and if I insert those, it doesn't change a thing about its behaviour, it still hangs..
124 views and no one knows anything? no small clue, no tip, no nothing?
I think it's just broken.
The only option you can try I see is a hard reset. To bad you haven't made a backup or something on your computer. Lesson for the next time, if you contacts and notes are that important, Make a daily backup!!!
Hey, xda-devs.
I need a bit of help. I was trying to flash Eclair 2.1 Polymod to NAND on my AT&T Tilt on T-Mobile's USA network. I was previously using Dutty's Diamond v1 and Myn's Warm Donut from haret.exe
Unfortunately, I was kind of stupid while flashing - I decided I was going to flash KAISIMG.nbh *before* I actually put the /andboot folder on there. (This was due to a lack of research on my part because I only looked at one how-to which omitted the /andboot step.)
"Well that's fine," I thought, "I'll just put the /andboot on there with the polymod inside and re-flash KAISIMG.nbh!" I did this, and it's still not working... which doesn't make alot of sense to me. My KAISIMG.nbh has no issue flashing, but when I restart the phone I get stuck at the first HTC splash with the planet & whatever.
I've tried multiple panels for the KAISIMG.nbh, I made sure nothing else was on the SD card, and I even tried a hard reset of my phone, still to no avail.
So tell me, xda-devs. Did I brick my phone? I don't think I did because it actually powers on and all that jazz, it just won't load the android install program.
dont think it is bricked
if you can get into the 3 colored bootloader screen it is not bricked. just flash wince rom and you should be able to use your phone again.
if you flashed an android nbh you should get the linux logo and see bunch of text scroll over your screen. it you hit the dpad you should get into the installer menu.
Maybe you didn't actually flash the nbh?
did you get into the tri colored bootloader screen and then did you hit power when prompted?
the android kaiser nbh normally doesn't have a splash screen, so your old wince splashscreen will remain.
hope this help, more details from your part would help us help you.
Hey, thanks for replying
Yes, I get the tri-color screen but I'm not getting the linux logo or anything of the sort. I'm getting the old splash screen that came with the phone. When I passed the tri-colored screen I get the prompt to press the power button, then it flashes KAISIMG.nbh, (Although it says something like "File - KAISIMG.nbh" and "OS - " then nothing after OS... dunno if that helps)
But I'm glad to know I didn't brick it!
I experimented with various KAISIMG.nbh files found here. I believe those are Android KAISIMGs although I don't know since I can't read them with my text editor.
It could be the problem I have once in a while on my Kaiser. Try removing the battery and hold down the power button. Put the battery back in and turn on your kaiser. You should start seeing the scrolling text.
As far as I know that's normal. Happens once in a while.
Dukenukemx said:
It could be the problem I have once in a while on my Kaiser. Try removing the battery and hold down the power button. Put the battery back in and turn on your kaiser. You should start seeing the scrolling text.
As far as I know that's normal. Happens once in a while.
Click to expand...
Click to collapse
Negative, no change... How long should I hold it down?
You're holding down the button to release any power left in your phone. Sometimes, it can be a hit or a miss.
If all else fails, invoke the loader by holding down power button + camera button, and then press the reset button with the stylus. Do this quickly when you turn on your phone, and you can problem load WM back onto your phone.
I think Android needs a custom HardSPl on Kaiser.
As far as the old splash screen is concerned, thats normal, flashing the nbh does not replace the splash screen, after flashing the nbh you usually have to pull the battery, wait a bit, then restart the phone, it takes a little time before the linux kernel boots the lcd panel, so at first it shows the splash screen for some time.
The screen will go weird briefly, followed by the scrolling text as linux kernel boots, watch for the 'hold dpad to enter installer' line, then press dpad centre button.
Don't worry about the need for a 'custom' HSPL, the hard-spl most of us use seems to work fine for majority of users, also although radio 1.71.09.01 is recommended, android will work fine with earlier radios, some even say it works better with some earlier radios, ( can't confirm this, since I seem to have no problems with anything radio related).
If you need to reflash WM, you can do this either using the bootloader in usb mode, or by putting a WM rom in SD renamed to kaisimg.nbh and flash by doing the power+camera method.
zenity said:
As far as the old splash screen is concerned, thats normal, flashing the nbh does not replace the splash screen, after flashing the nbh you usually have to pull the battery, wait a bit, then restart the phone, it takes a little time before the linux kernel boots the lcd panel, so at first it shows the splash screen for some time.
The screen will go weird briefly, followed by the scrolling text as linux kernel boots, watch for the 'hold dpad to enter installer' line, then press dpad centre button.
Don't worry about the need for a 'custom' HSPL, the hard-spl most of us use seems to work fine for majority of users, also although radio 1.71.09.01 is recommended, android will work fine with earlier radios, some even say it works better with some earlier radios, ( can't confirm this, since I seem to have no problems with anything radio related).
If you need to reflash WM, you can do this either using the bootloader in usb mode, or by putting a WM rom in SD renamed to kaisimg.nbh and flash by doing the power+camera method.
Click to expand...
Click to collapse
Yeah, that's the problem - I've flashed the .nbh, then taken the battery out for 10+minutes (including the method mentioned above of draining the power) but the screen never changes from the first splash page. I never get the scrolling text.
EDIT: I have a theory that maybe I should try the Panel 1 kaisimg.nbh instead of Panel 2 but since I don't have a computer that has a micro-SD slot it's a pain in the ass getting files on/off of there so I'll have to try it later. I'm also going to try with another built (Probably Myn's) to see if that works.
I got myself a cheap sd card reader and microsd adapter, makes life so much easier, however if you don't have access to one at the moment, just remove any sd in the phone, disable activesync, put the phone in bootloader, connect to usb cable, flash a WM rom, ( try a Stock HTC one from the wiki pages, this wipes everything, os,bootsplash,radio and gets rid of any traces of any custom roms).
And try running from SD to identify your panel type, etc, saves some time when flashing nand if you don't have to guess
First of all - I am a Sprint customer with the Latest Htc Rom -stock
List of problems and actions taken.
Problems
Soft reset reboots with phone in Airplane mode.
When the end key is pushed not long pressed but pushed it puts phone into Airplane mode.
Battery run time is not about half or even less than it was before.
Actions taken
Removed battery for about 10 minutes and tried a hard reset. Got to the screen where you are supposed to hit volumn up to restore to original and well the volumn up button gets pressed but nothing happens. So after waiting for about 15 minutes I do a soft reset to get back to the HTC Sense screen (today screen). I take the phone out of Airplane mode cause from reset. I hit the volumn up button and it works fine. I tap the end key and it puts me back in Airplane mode.
So I reflash stock rom back in that by the way wouldn't go until I unlocked the phone with HardSPL. Apon first reboot it still boots with phone shutting down into Airplane mode. Turn phone back on then turn power off. Take battery out. Replace battery. While holding Talk ad End buttons I tap power on for hard reset. Goes through try colored screen then to the volumn up option screen. I tap volumn up and nothing still happens.
I'm looking at Task 29 but I am worried about the volumn button not working.
Anyone have any ideas on what direction to take. Thank you
Hootyhoo said:
First of all - I am a Sprint customer with the Latest Htc Rom -stock
List of problems and actions taken.
Problems
Soft reset reboots with phone in Airplane mode.
When the end key is pushed not long pressed but pushed it puts phone into Airplane mode.
Battery run time is not about half or even less than it was before.
Actions taken
Removed battery for about 10 minutes and tried a hard reset. Got to the screen where you are supposed to hit volumn up to restore to original and well the volumn up button gets pressed but nothing happens. So after waiting for about 15 minutes I do a soft reset to get back to the HTC Sense screen (today screen). I take the phone out of Airplane mode cause from reset. I hit the volumn up button and it works fine. I tap the end key and it puts me back in Airplane mode.
So I reflash stock rom back in that by the way wouldn't go until I unlocked the phone with HardSPL. Apon first reboot it still boots with phone shutting down into Airplane mode. Turn phone back on then turn power off. Take battery out. Replace battery. While holding Talk ad End buttons I tap power on for hard reset. Goes through try colored screen then to the volumn up option screen. I tap volumn up and nothing still happens.
I'm looking at Task 29 but I am worried about the volumn button not working.
Anyone have any ideas on what direction to take. Thank you
Click to expand...
Click to collapse
Which model is your device? You can find the model number above the barcode that is under your battery. It will be in the form of RHODxxx where "xxx" is a three digit number. From here, I'll be able to help you a bit better once I know which model you are using.
Thank you for the reply. The model# is M8RHOD400. Since my first post I have tried flashing other Roms and I think it was the Sharkie Rom that actually said it could find the end key file. Other than that all the other Roms I tried pretty much do the same. When end key is tapped it shut phone off. Plus the volumn up still doesn't work at the hard reset state. It works normal otherwise but when I try to hard reset it will not go past the first screen that says press vol. up to reset. Thanks again so far.
Hootyhoo said:
Thank you for the reply. The model# is M8RHOD400. Since my first post I have tried flashing other Roms and I think it was the Sharkie Rom that actually said it could find the end key file. Other than that all the other Roms I tried pretty much do the same. When end key is tapped it shut phone off. Plus the volumn up still doesn't work at the hard reset state. It works normal otherwise but when I try to hard reset it will not go past the first screen that says press vol. up to reset. Thanks again so far.
Click to expand...
Click to collapse
Ok, so the first thing we need to test for is hardware fault. To do this, you will need to perform a task29 and then flash the latest Sprint ROM. After that, try to see if you have the same problems. Please do not install anything while testing. If it works fine like this, then we will need to do some specific testing on the custom ROMs to narrow down the cause.
Things have changed a bit. Long morning. I tried flashing a few ROMs to see if any would fix it. I know a feeble attempt. Well one went bad and never got past the splash screen when it went to restart. Won't connect to ActiveSync. So I tried reflashing from SD card. and I get to
RHODIMG.nbh
OS -
Press Power button
to start update image
Press VolDn button
to cancel update image
The problem is I press power button and nothing happens. I press any buttons and nothing happens. I pulled the battery and reinstalled it and got the same again. I tried to run Task 29 but how. Won't load. Tried renaming rbh file but got the same results as above. I need a way to hard reset without buttons and its obvious that nothing working outside of windows. I'm lost.
Hootyhoo said:
Things have changed a bit. Long morning. I tried flashing a few ROMs to see if any would fix it. I know a feeble attempt. Well one went bad and never got past the splash screen when it went to restart. Won't connect to ActiveSync. So I tried reflashing from SD card. and I get to
RHODIMG.nbh
OS -
Press Power button
to start update image
Press VolDn button
to cancel update image
The problem is I press power button and nothing happens. I press any buttons and nothing happens. I pulled the battery and reinstalled it and got the same again. I tried to run Task 29 but how. Won't load. Tried renaming rbh file but got the same results as above. I need a way to hard reset without buttons and its obvious that nothing working outside of windows. I'm lost.
Click to expand...
Click to collapse
First of all, you should stop trying to update with the SD card. That's the problem you're having, so we need to try something different. Flash it via USB. You don't need an Activesync connection. It just needs to change from SERIAL to USB at the bottom of the bootloader screen. Once that happens, simply run the RUU and it will flash to your device. Do task29 first. Then do the stock Sprint ROM. Task29 cannot be flashed via SD anyway. The NBH file in task29 is a filler file. It's the actual RUU in it that is modified to perform the wipe.
So, let's try this again.
1. Get into the bootloader by holding voldown while turning the device on.
2. Plug it in to a USB port on your PC.
3. Once the text at the bottom of the screen changes from SERIAL to USB, begin running the task29 RUU.
4. Once the progress bar gets to 99% on the task29 flash, hold the voldown button again and await the restart.
5. Once it restarts into the bootloader and the text changes again, begin flashing the latest Sprint ROM.
6. Allow the ROM to boot up all the way and settle down, then give it one soft reset.
7. When it comes back again, go ahead and test it out to see if your problems persist.
8. Report back here with the results, and we'll move on from this step.
Task 29 doesnt seem to working because it reboots back to the last rom. Everything is still there. I really don't think that any of the hardware buttons work outside of working in the OS and at startup. IE volumn works when unit is on or when putting unit into bootloader mode but Volumn button does not work when trying to do a hard reset or a Task 29. Power button turns on unit, turns off unit, puts into bootloader mode, starts hardreset. I have loaded a Custom Rom just because maybe with the X button on the bottom and bigger it might be easier. I'm all ears from here on out. Its seems I need to clear ROM or Cmos without button usage. I don't know if that makes any sense to you but like I said I'm all ears on what to do now. Thanks for the little lesson on flashing without Activesync. Feeling kinda stupid about that one. Thanks for the help so far.
Hootyhoo said:
Task 29 doesnt seem to working because it reboots back to the last rom. Everything is still there. I really don't think that any of the hardware buttons work outside of working in the OS and at startup. IE volumn works when unit is on or when putting unit into bootloader mode but Volumn button does not work when trying to do a hard reset or a Task 29. Power button turns on unit, turns off unit, puts into bootloader mode, starts hardreset. I have loaded a Custom Rom just because maybe with the X button on the bottom and bigger it might be easier. I'm all ears from here on out. Its seems I need to clear ROM or Cmos without button usage. I don't know if that makes any sense to you but like I said I'm all ears on what to do now. Thanks for the little lesson on flashing without Activesync. Feeling kinda stupid about that one. Thanks for the help so far.
Click to expand...
Click to collapse
I don't know where you got your task29 utility from, but you cannot run it from SD. It HAS to be used with the RUU that came with it. It is the modified RUU that runs the task29 function. Just to eliminate the confusion, I'm uploading a modified RUU to this post that is very simple to use. Extract it from the archive and follow these instructions.
1. Connect the device (in bootloader) to your PC and wait for USB to show in the bootloader.
2. Run the RhodiumWAdvancedRUU.exe
3. Select the third radio button that says "Perform task29 only."
4. Uncheck the box that says "Restart utility when task29 completed."
5. Hit Next and keep going through it until it flashes.
6. Once the progress bar gets to 99%, hold your voldown button and wait for the reboot.
7. Once you are back into the bootloader, wait for USB to show up on the screen again and then flash the stock ROM.
8. Once the flash is complete, allow it to boot once and settle, then soft reset.
9. Once it restarts, test the problems again.
10. If the problems persist, we can move on from here.
Note: If you want to make sure that the task29 utility worked, feel free to try and boot it after performing the task29 and see how far it gets. If it gets stuck at the bootscreen, then you know it worked. Simply pull the battery, or hit the reset button, and power it back on while holding voldown to return to the bootloader and continue with step 7.
I cannot find the uploaded file that you sent, but also I am not trying to run the Task 29 file from SD card. I'm trying from the comp but like I said, when in any mode other than Windows, I really believe none of the buttons work. Volumn down at 99%. Volumn up on a hardreset. The buttons work to get me into the various mode either from Windows or at startup, but once into the special modes I think I don't get any buttons. That and the fact that the only thing the endkey button does in turn phone on and off but doesnt end anything is peculiar to a person like me. Anyways I didn't get your Task 29 file yet.
Thanks again
Hootyhoo said:
I cannot find the uploaded file that you sent, but also I am not trying to run the Task 29 file from SD card. I'm trying from the comp but like I said, when in any mode other than Windows, I really believe none of the buttons work. Volumn down at 99%. Volumn up on a hardreset. The buttons work to get me into the various mode either from Windows or at startup, but once into the special modes I think I don't get any buttons. That and the fact that the only thing the endkey button does in turn phone on and off but doesnt end anything is peculiar to a person like me. Anyways I didn't get your Task 29 file yet.
Thanks again
Click to expand...
Click to collapse
That's because I forgot to upload it. Sorry. here it is.
I know you feel that way, but there are a few things we can try. We just need to go step by step to rule things out. Please trust me on this. I'm trying to keep from saying that your phone is having hardware troubles, because I think it is fixable as it is now. We just have a certain order to attack it from.
I do appreciate the help I have always gotten from this site and thank you. The worries that I have are actually getting any buttons to work when doing any work on the phone outside of the windows format. I noticed that at 99% I am to tap the vol. dw button and I don't think thats gonna work. From my desktop computer exsperience that I have I know there is actually 3 modes happening that work in conjunction with one another. CMOS MSDOS and Windows. I don't think its a windows issure and I don't know what else there is in these phones that work, but I will try this program and thank you again. I will let you know where I at with it in a few.
Hootyhoo said:
I do appreciate the help I have always gotten from this site and thank you. The worries that I have are actually getting any buttons to work when doing any work on the phone outside of the windows format. I noticed that at 99% I am to tap the vol. dw button and I don't think thats gonna work. From my desktop computer exsperience that I have I know there is actually 3 modes happening that work in conjunction with one another. CMOS MSDOS and Windows. I don't think its a windows issure and I don't know what else there is in these phones that work, but I will try this program and thank you again. I will let you know where I at with it in a few.
Click to expand...
Click to collapse
Even if holding voldown doesn't work, you will still be able to boot back into the bootloader. task29 will clear the internal memory of everything. There won't be anything to load, so it will hang on the splash screen if it tries to load. Don't worry. We're going to try everything we can before we call it quits. This is a unique problem, but I think it can be fixed. Like I said, we just have to go in order.
Okay. First of all I'm sorry for the void between your last message and now. Its been a wild week so far. Thanks again for the help so far. With that said and done heres were I am at. I tried your Task 29 software and it did seem to be different at visualy. Possible problem is, is that when it rebooted after following your instructions, it did not go to the tri colored screen but to a blueish looking screen with the words Touch Pro 2 across the center. It almost looked like a splash screen, but never went any farther. So I'm not sure if that was acceptable or not as a proper task 29 but I did go ahead and load the stock rom into it and it went find. After the first reboot it started up with Airplane mode on. I shut it off and turned on the phone again. Everything was okay. You can only assign the phone button and nothing else that I know of so I couldn't see what was assigned to the end key so I pushed it. immediately it stuck the phone back into airplane mode again. Push or I should say tap and it took it out of it. I realize that by default the phone set the long press end key to shut the airplane mode on and off, but I am tapping and only tapping as I always have in the pass. Well so I got the idea of trying a different Rom in hopes that something will program the key to not shut the phone function off everytime I accidently tap the end key, I tried a few and Sharkies seems to surfice for the moment. By tapping the end key only brings up the Comm Manager instead of shutting the phone function down. Funny thing is though is that also was Sharkies default for long press. The problem has become with that now is that it has been just popping up by itself over and over. So I started tapping the end key when it popped up and suddenly it seems that it worked until I realized the the end key doesnt seem to be working at all. It clicks but thats it. So what to do now. Good thing at this time is the fact that I dont have to worry anymore about accidentally tapping the end key.Good chance it could be the button it self. I don't know. What ya think?
Hootyhoo said:
Okay. First of all I'm sorry for the void between your last message and now. Its been a wild week so far. Thanks again for the help so far. With that said and done heres were I am at. I tried your Task 29 software and it did seem to be different at visualy. Possible problem is, is that when it rebooted after following your instructions, it did not go to the tri colored screen but to a blueish looking screen with the words Touch Pro 2 across the center. It almost looked like a splash screen, but never went any farther. So I'm not sure if that was acceptable or not as a proper task 29 but I did go ahead and load the stock rom into it and it went find. After the first reboot it started up with Airplane mode on. I shut it off and turned on the phone again. Everything was okay. You can only assign the phone button and nothing else that I know of so I couldn't see what was assigned to the end key so I pushed it. immediately it stuck the phone back into airplane mode again. Push or I should say tap and it took it out of it. I realize that by default the phone set the long press end key to shut the airplane mode on and off, but I am tapping and only tapping as I always have in the pass. Well so I got the idea of trying a different Rom in hopes that something will program the key to not shut the phone function off everytime I accidently tap the end key, I tried a few and Sharkies seems to surfice for the moment. By tapping the end key only brings up the Comm Manager instead of shutting the phone function down. Funny thing is though is that also was Sharkies default for long press. The problem has become with that now is that it has been just popping up by itself over and over. So I started tapping the end key when it popped up and suddenly it seems that it worked until I realized the the end key doesnt seem to be working at all. It clicks but thats it. So what to do now. Good thing at this time is the fact that I dont have to worry anymore about accidentally tapping the end key.Good chance it could be the button it self. I don't know. What ya think?
Click to expand...
Click to collapse
On task29, it removes the entire ROM from the device's internal memory. There was nothing to boot up, so it stopped at the splash screen. That's how task29 works.
Well, this allows us to completely remove the possibility of the software's effect on your problem. What is happening is that the device is recognizing a short press as a long press. Since the button commands are interpreted by the SPL, we've got one last thing to try before declaring hardware fault. We'll need to flash the stock SPL, again to see if that clears it up. To do this, I'd ask that you flash the latest stock ROM to your device. After this, you'll need to go back to the CDMA Hard SPL thread and grab the latest stock SPL. Flash that to your device. Then boot it up and see if the problems persist. If it continues to register short presses as long one, then you have a hardware fault. If this fixes it, then you should be able to flash Hard SPL again and load another ROM with no problem.
Accidental post