Enter to send? - Touch Pro2, Tilt 2 Windows Mobile General

Can somebody make a tweak where you would be able to press enter on the keyboard and send a text message. I Love sense 2.5 but when im using HTC messaging i tend to forget that its not like the standard WM messaging where the send button is at the bottom. And ill hit back and have to type my message ALL over again. so either have the enter button to be able to send or move the send button on the SENSE 2.5 to the bottom row and remove the back button?

yes this can be done with to programs...mortscript and rhodium keyboard control...you can write a script to mouse click in the send spot...then map it to the enter key...hope this helps!!

jdmsleepr said:
yes this can be done with to programs...mortscript and rhodium keyboard control...you can write a script to mouse click in the send spot...then map it to the enter key...hope this helps!!
Click to expand...
Click to collapse
How on earth do I do this? I need like step by step on this one? sorry I've never touched mortiscript before

^^^i'd like to know that as well, cause i can't seem to figure it out^^^
guess no one knows how...=/

Related

X2 DIaler fix

People Who have had a hard time with the dialer of x2 with the dialpad
..this is a small mortscript that will enable diable the dial pad.
it will install a prgram called dial pad switch to ur start menu
click it to enable/disable the dial pad..
twitter follower starzshowz
thanks will try the fix
doesnt work tried it, the keypad is hidden
if i tab the dialerswitcher, "There is no application assorciated with "changer" run the application first then open this file from within the application"
neowkewl said:
doesnt work tried it, the keypad is hidden
if i tab the dialerswitcher, "There is no application assorciated with "changer" run the application first then open this file from within the application"
Click to expand...
Click to collapse
You run the dialer pad application once! Then open your phone panel and the dialer pad is displayed. Or open phone panel and then run the dialer pad and it was pop up. Press the dialer pad application again and the keypad disappears.
@Rotastrain - When calling voicemail (or any calls) I can't open up the dialerpad to press #s to delete, save, or go on to the next voice mail message. Can ya come up with a fix for that please? Thanks.
Dialer don´t work in Landscape Modus on X1 Win6.1.
There is already a solution to the problem ???
Thanks..
Im Packing said:
You run the dialer pad application once! Then open your phone panel and the dialer pad is displayed. Or open phone panel and then run the dialer pad and it was pop up. Press the dialer pad application again and the keypad disappears.
Click to expand...
Click to collapse
lol i really don`t understand u buddy XD
what do you mean with the dialerpad application? the setup file ->cab?
and the : or open phone panel and poping up dialer pad, doesn`t work
the shortcut in the startmenue doesn`t work.
BUT if i call my voicemail i get the dialpad for that moment but still i can`t use the fixshortcut in startmenue
ok i think the startbar hide the button who tooks out the keypad.... wm6.5... how can i get the pad by an other way? or can i change that the startbutton and bar is up on the screen?
neowkewl, I had the same problem, so I installed mortscript 4.2 and now the dialpad appears.
But there isn't way to hide it again you will go back to run the fix to hide. is there an option to hide/unhide the dialpad?
Im Packing said:
@Rotastrain - When calling voicemail (or any calls) I can't open up the dialerpad to press #s to delete, save, or go on to the next voice mail message. Can ya come up with a fix for that please? Thanks.
Click to expand...
Click to collapse
neowkewl said:
lol i really don`t understand u buddy XD
what do you mean with the dialerpad application? the setup file ->cab?
and the : or open phone panel and poping up dialer pad, doesn`t work
the shortcut in the startmenue doesn`t work.
BUT if i call my voicemail i get the dialpad for that moment but still i can`t use the fixshortcut in startmenue
Click to expand...
Click to collapse
neowkewl said:
ok i think the startbar hide the button who tooks out the keypad.... wm6.5... how can i get the pad by an other way? or can i change that the startbutton and bar is up on the screen?
Click to expand...
Click to collapse
david-x1 said:
neowkewl, I had the same problem, so I installed mortscript 4.2 and now the dialpad appears.
But there isn't way to hide it again you will go back to run the fix to hide. is there an option to hide/unhide the dialpad?
Click to expand...
Click to collapse
The keypad button is hidden behind most wall papers. That's why Rotastrain made the mortscript.
Press the Phone button. Then go to windows start and press the dialpad fix program. Exit out of the Start menu. You should now have the dialpad open. Repeat procedure to close dialpad from the phone.
You could always try and program a softkey to the mortscript dialpad program and see if that works to simplify opening and closing the dialpad.
ok here is a video what says what my problem is right now
the fix doesn`t work
http://www.youtube.com/watch?v=VcPKMoRIcTo
neowkewl said:
ok here is a video what says what my problem is right now
the fix doesn`t work
http://www.youtube.com/watch?v=VcPKMoRIcTo
Click to expand...
Click to collapse
You need to install Mortscript 4.2, then you can click on that link on the Start menu.
ok now it`s working !!
but now i`ve got an other problem, if i push a number onec the sound that it makes, still continues für 10 seconds
any solutions ?
It works great, even when I restart the dailer the dailpad stays!
But is it possible to use dailpad while calling? I can't give response when calling my bank..

Copy Paste Functionality on CM6/AOSP

Is there any way to get copy/paste functionality on a non-sense 2.2 rom. Its killing me that I dont have this, really the only thing missing from CM6 and holding me back from it as a daily driver.
Any thoughts would be appreciated!
Copy/paste should work just fine in CM6. Works for me, anyway.
Just long press on the text you want and you should get the menu with copy/cut options.
Not to hijack this thread, but I've asked elsewhere and there doesn't appear to be a solution but I figured I'd give the inquiry another go...
Is anyone aware of a method to use either a multitouch keyboard or perhaps a specific pinch/zoom gesture to copy/past/cut text on the fly?
I really miss being able to do so easily on my G1's physical keyboard...and highlighting specific text with the trackball.
maybe i am a roflcopter, but I cannot get a copy paste prompt to open after a longpress? Does anyone know what I could be doing wrong?
feld0013 said:
maybe i am a roflcopter, but I cannot get a copy paste prompt to open after a longpress? Does anyone know what I could be doing wrong?
Click to expand...
Click to collapse
Where are you trying to copy text from?
I am able to long-press on any text field (SMS, Address Bar, etc.) and get a pop-up menu that includes: Select text, Select all, Cut, Copy, Paste, etc.
I am running CM6 RC1 on my EVO.
feld0013 said:
maybe i am a roflcopter, but I cannot get a copy paste prompt to open after a longpress? Does anyone know what I could be doing wrong?
Click to expand...
Click to collapse
You need to menu -> select text.
Swype has a fairly easy-to-use (though not as easy as SenseUI) select text method. Just Swype from the Swype key (the one in the bottom-left corner with the i above the Swype logo) to the SYM key. This will open the third keyboard in Swype; the editing keyboard.

[Q] Dial to extention number

Hello,
I was using RCMix V3.0 A2SD+ which has HTC sense.
I can use this number +886222222222pp357 so it will dial number +886222222222.
And after it connects, it will have 2 pause and then automatically dial extion 357.
Now I'm trying Oxygen V2.0.1.
I cannot find how to type "pp."
I searched on internet and some articles said that ",," is working but I couldn't find how to type ",,".
Could anyone teach me this?
Thank you.
Hi,
This is my first post, so easy on me...
Did you try the Dialer One app? It's on the Android Market. That might solve your problem.
Or
p pause 2 second delay put in comma in place of p ","
w wait for input from user ";"
I don't know what your keyboard looks like, so I don't know how to tell you to enter a comma...
Thank you.
I tried ",," to replace "pp". It really works.
However, I couldn't find how to type ",," in dialer one.
I can only add ",," from Google Contacts.
Could you teach me how to input it in Dialer one?
how to enter comma
I'm using CM7 (Gingerbread).
Note: When in contacts, this is how you would create a new contact or edit an existing contact. When in a dialer app, this is how you would call somebody on the phone, as in dial. Sorry I see that Dialer One is not required to enter a comma. However, it's a nice dialer app instead of the stock android one.
For me in contacts to get a comma I press the symbol key, which is the lower left key, and then a symbol keyboard comes up.
In stock dialer I press the hard menu button.
In dialer one, same, I press the hard menu button.
I'm going to try attach some screen shots.
Thank you cpoxda.
This really solve me issue.
Really appreciate!

[Q] no enter button?

Is there no enter button on the keyboard?
When I write an sms I would like to be able to hit the enter button to
start a new sentence on a new line but I don't seem to be able to do so?
cheers!
See here: http://forum.xda-developers.com/showthread.php?p=23362533
peterv6 said:
Is there no enter button on the keyboard?
When I write an sms I would like to be able to hit the enter button to
start a new sentence on a new line but I don't seem to be able to do so?
cheers!
Click to expand...
Click to collapse
Try typing "\n"? (Joke)
Anyways, I hadn't run into this issue yet, but I can definitely see this annoying me...
Anyone know if line breaks are removed in SMS messages? If they are, this is really a non-issue I guess.
cwoggon said:
Anyone know if line breaks are removed in SMS messages? If they are, this is really a non-issue I guess.
Click to expand...
Click to collapse
No, you can use line breaks but the official Android keyboard + messaging app combo never had an "enter/return" option in the messaging app. It was always replaced by the smiley button. ICS is no exception, you'll have to either use a different keyboard or SMS app if you want line breaks.

skip line messaging app

Hi,
this might sound like a stupid question but when using the default messaging app for sms in ICS there doesnt seem to be an ENTRE key. Is there no way to skip lines when texting on ICS?
Push space bar a lot is the only way it seems..
Use a different keyboard
danger-rat said:
Use a different keyboard
Click to expand...
Click to collapse
What keyboard can you recommend?
I'm using the 'TouchPal' keyboard (which I'm very happy with btw), and while it shows the return key, it doesn't insert the CR/LF in the SMS application.
Oh !!
press enter = send
how to use shift + enter (same computer) for enter new line ?

Categories

Resources