I have formatted the card to fat32, checked it for errors, copied the HERMIMG.nbh file to the root of the storage card and when i try to boot its stucks in bootloader (IPL-1.04 / SPL-2.10.olipro) saying "Serial" and stucks there.
I have tried many roms but its same thing.
The phone is not bricked, it just want boot from storage card.
Can someone help me with this problem please?
sd card Has to be 2Gb or less...
it is - 1 GB microsd card.
try blowing compressed air into the sd card reader as there may be dust in there. If the sd card isn't formatted fat32 (please check, they come formatted FAT as default) it won't work and doublecheck spellng on hermimg.nbh, I have heard of people putting in herming.nbh, that won't work.
Related
when I put the card into a card reader, the sd card can't be read, only can be format. But after I pressed format, it said it can't. What happen to my card? but if i connect my phone to computer, it can show all the files in the sd card.
The important question is that, I have rooted it, and i want to use app2sd. If i can't partition the sd card with ext2, i can't move apps to sd card. I have tried to use rom manager to partition it, but still can't. Any method other than buy a new card? thx~~
You need to flash amonRA's recovery.
Just do a search on the forum as there are a couple of how to's.
From there you can partition your card, verify your ext partition, upgrade from ext 2 to 3 and ext 3 to 4.
Good luck.
sometimes that can occur with a bad card reader. have seen it many times. the card reader will read some cards but not others.
On my DInc, my SD card refuses to be read even though there is a card in the slot. If I boot to recovery, I can go under Mounts/Storage and Mount USB Storage to copy my ROMs etc to it from Windows Explorer.
But as soon as I boot into the Dinc, the SD card says "Preparing SD card" followed immediately by "SD Card Removed". What's the deal with this?
I've used a great number of ROMs and it simply hasn't worked in a while. I'm currently running Clutch 1.0.
Any ideas how to get my SD card working from the phone again? To reiterate, I can access the SD card if I reboot to recovery and access it under Mounts/Storage. Just not when the phone is booted up for use.
I think your best bet would be to reformat the sd card through a pc to FAT32. Make sure to copy all the sd card contents to a computer before formatting it. See if this helps.
My device is rooted, s-off and I flashed WildChild 3.3 some days ago.
Problem is my phone suddenly doesn't see my SD card at all. Camera says "Insert SD card", Root Explorer "SD card not found", Link2SD "SD card not present". Even in CWM trying to mount SD card gives back error.
When connected to my PC with a card reader (my card reader doesn't have any switch) in MiniTool Partition Wizard, it mounts as read only. So I just see the contents of the FAT32 partition, I can't perform format. Could it be fried?
I tried another SD card on my phone and it mounted normally, whereas my SD card had exact the same problem on a Galaxy Europa (not mounting at all).
It is a Verbatim 8GB class 4 and it came with no adaptor. It worked fine until now, it also worked the first days with the new ROM (3 partitions, FAT32, ext2, linux swap). I don't have a clue how it became read-only...
Any ideas?
Most likely corrupted. Seeing that your other card works, its a high possibility that its gone corrupt.
Buy a new one or use the other.
Sent from my Single Core Wildfire S. :|
solved
I am going for a new micro SD card. Damn, I would prefer spending my money otherwise...
You can try Hp Formatting Tool, it worked for me everytime. It's like a handy charm. :")
Hi everyone!
I upgraded to CM 13, big problem was the fact that my Samsung Evo 64 GB SD card was not usable as internal storage or external. I entered recovery mode and wiped all to install Cloudy 2.5. I have an issue now, the sd card is not formatted in its own original filesystem, and after i tried to change it to exFat or ext4 it shows me a 15mb sd card, rather then a 64 GB one.
How do I fix this?
You can take your micro SD card, put it in the adapter and then plug it to your computer.
After that you can take a software like "minitool partition wizard" and use it to format the micro SD card.
I figured out the SD card problem , i couldn't fix it for nothing until i did this.
FOR ANYBODY THAT GETS STUCK AT 20% or any other sd card problem with 6.0 roms
1. Backup all files on SD card (This will delete everything on your sdcard)
2. Install minitool partition wizard
3. Remove all partitions from SD card with partition wizard (Do not reformat)
4. Place SD card into phone
5. Let the phone detect SD card and try to reformat
6. chose either Internal or Portable Storage
7. Enjoy because it works perfectly for me now.
btw. im running a LG G3 D850 ATT
Senior Member193 posts Thanks: 7
In cm 13 ,When the new sd card detected and asked to make internal storage. I did .It asked to erase SD card to make as internal storage. I formated. After formatting my twrp got suck. It doesn't works when the SD card in the mobile.what to do?even I went back to 5.1.1 the problem is still there. Please tell me how to solve this.I formated the sd card in pc and put in the mobile but still the twrp recovery stucks.
Yes this happens with a sd card reader connect your sd card to pc and format it as exfat or fat32 your problem will be solved