what i wanted to do was delete a file in tool commander from my storage card ....i went to properties then association and i clicked the x for delete ...now all my cabs have that windos flag kinda symbol ...were you cannot open it...any suggestions
You did exactly what you said you did: you deleted the association from the file properties.
If you want to delete a file rather than its associations, you can do this in either File Explorer or in Total Commander (which I recommend over "Tool Commander") by tapping-and-holding on the file you want, then selecting "delete" from the menu that pops up.
In Total Commander, you can also select the file by tapping it once, then tap the "File" softkey in the lower left and select "Delete" from the pop-up menu. That's way less complicated than what you did.
I might be able to help you re-associate the .cab files properly.
First, get a copy of Total Commander and install it if possible. This may not be possible if .cab associations have been deleted.
Then navigate to a cab file. It doesn't matter which one. Tap-and-hold and select "Properties" from the pop-up. Go to the "Associate" tab then click the "Associate..." button.
Fill in the boxes as follows:
Command: wceload.exe
Parameter: "%1" /nodelete
Icon file: shellresapps.dll
Index: -15618
Hit "OK" twice to get out and save the settings and you should be good to go.
YOUR METHOD WORKED FOR SOME CABS..i just tried to inport a cab file from my pc via (wmdc) that also cannot be open ...any fix for this
YOUR METHOD WORKED FOR SOME CABS..i just tried to inport a cab file from my pc via (wmdc) that also cannot be open ...any fix for this
Related
Hi everyone, I am new to the scene and just signed up with tmobile and received my dash today. I immediately flashed the dash with Ricky's Kavana rom and had not setup myFaves. I am not sure how the myFaves works but if I set them up with this modded rom will they register with tmobile as myFaves numbers?
No it has nothing to do with T-Mobiles My Fav plan.
HOW TO SET UP MyFaves
Instructions
==================================
This Part is for thoses how have v11 to v19
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
This part is for if you flashed your phone
============================================
1)Download Total Commander form here http://ghisler.fileburst.com/cebeta3/index.html
2)Install to your phone
4)Open Total Commander
5)Navigate to \Program Files\Excalibur Photo Dialer\ in there youll find lnk files
named Dial_Contact1m.lnk all the way thougth to Dial_Contact12m
6)Now Click File then click 4 (edit)
7)You sould see this 40#"\Windows\VJDialer.exe" +1-555-555-1234"
8)You need to Change +1-555-555-1234" to the number you what
9)Then Click File then Click 2 (Save)
This part is for if you Did't flashed your phone
============================================
1)Download Total Commander form here http://ghisler.fileburst.com/cebeta3/index.html
2)Install to your phone
4)Open Total Commander
5)Navigate to \Storage Card\Program Files\Excalibur Photo Dialer\ in there youll find lnk files
named Dial_Contact1m.lnk all the way thougth to Dial_Contact12m
6)Now Click File then click 4 (edit)
7)You sould see this 34#"\Storage Card\Program Files\Excalibur Photo Dialer\VJDialer.exe" +1-555-555-1234
8)You need to Change +1-555-555-1234" to the number you what
9)Then Click File then Click 2 (Save)
============================================
This part is for v20 and v21
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
1) Go to MyFaves panel
2) Slid you panel to the left untill you get to (6)Change My5 Contacts
-------------------
3) Click on it
4) click edit Click contact1 then click change name now enter your contacts name once you have done that press down twice on your center button then the name will come up on the screen
5) click edit Click contact1 then click change phone click back then enter you contacts number then once you have done that press down twice on your center button then the number will come up on the screen
6) click edit Click contact1 then click Change image then click choose then find you contacts photo in you file system then
once you found the picture press down twice on your center button then the picture will come up on the
7) do the same for all contacts then click save
8) turn off you phone then turn it back on
This part is for if you Did't flashed your phone
============================================
1)Download Total Commander form here http://ghisler.fileburst.com/cebeta3/index.html
2)Install to your phone
4)Open Total Commander
5)Navigate to \Storage Card\Program Files\Excalibur Photo Dialer\ in there youll find lnk files
named Dial_Contact1m.lnk all the way thougth to Dial_Contact12m
6)Now Click File then click 4 (edit)
7)You sould see this 34#"\Storage Card\Program Files\Excalibur Photo Dialer\VJDialer.exe" +1-555-555-1234
8)You need to Change +1-555-555-1234" to the number you what
9)Then Click File then Click 2 (Save)
-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=
these Instructions was made by RickWyatt at xda-developers
http://forum.xda-developers.com/forumdisplay.php?f=309
\05\04\2008\ at 1.13pm
Click to expand...
Click to collapse
But this is not the real myFaves that tmobile phone rom comes with, is this correct?
Correct oh mahn doe
Thanks for posting these instructions. I was about to go bonkers.
Go to this link, download "duprade My Faves" and install it on your phone.
http://forum.xda-developers.com/archive/index.php/t-369500.html
Yo need to go to CHome to configurate "CMyFaves" for the rapid acces to your number and changes the default DIALER (Dialer.exe) by: "My5Dialer.exe;phonenumber" with 1 prefix to the phone number.
Good luck
Adavid
My faves
I tried to install Duprades my faves on my t-mobile dash but it does not show any names or number and i cannot make any calls via myfaves, please help me
when i 1st installed the duprades my faves app it didnt work for me and i gave up but just recently installed it and rebooted my phone then i was sent a txt msg that said your my faves contacts have been refreshed then i went back to my faves app then worked
How does one reset/edit the names on Ricky's v24 with the My-Favs(photo dialer) app. I didn't realize it was putting whatever I typed as the name when I tried to edit the name of one of my contacts. I typed the name in and hit the center button, and it just vanished, so I typed in some more stuff and that vanished too. Now when I restarted my phone, there's a bunch of gibberish text, everything I typed, as the name for Contact 1. I can't get rid of it to add just the name in.
Alright guys, and gals
I hate to bother everyone over such a minute, tiny issue, and I'm sure this has been asked before (although before everyone jumps on me I have already searched the forum), but I was wondering if there is an easy was to change or get rid of the "START" text next to the start menu in WM 6.1?
I have just installed some gorgeous task bar icons by InsecureSpike and feel that I can do without the Start text.
Any ideas?
Cheers,
Orpheus
yeah, how can i change the "start" text into "Go" or whatever?
greets
sid
Follow instructions on this link: http://forum.ppcgeeks.com/showthread.php?t=65911
Excellent, Thanks buddy I will give that a try
thank you, but, oh my god, this is it too much input.
my english is not good enought for too much.
i need a little tutorial how can i change the "start" text in wm6.1
can you help me?
greets
sid
Just did a search. THIS popped up
Its actually not that difficult. Just follow these instructions by tsowens who by the way deserves credit for this.
Change Start Text
1. Unsign your shellres.dll.0409.mui
2. Open it in one of these three Reshack / PE Explorer / Restoratorand go to string value 321 and change the name from Start to whatever you want.
3. Save your modified file
4. Open MssignerorMultiple file Signer
· click Start sign Process (for MFS follow directions in the link)
· a window will pop-up with "Process finished!"
· You will see a that a text file has been create for your shellres on your desktop
· Open the text file, if you see "Warning: This file is signed, but not timestamped, Succeeded" you know the file was signed.
5. Transfer the modified file to your SD card
6. Open TC and navigate to the /Windows and rename your old file to "shellres.dll.0409.mui.bak"
7. Move your modified file from your SD card into the /Windows
8. Soft Reset updated 12/09/08
super, thank you so much
greets
sid
mhmm only i found a shellres.192.dll in the windows folder with total commander...
greets
sid
Hi all,
in the Windows directory you got the directorys RSK und LSK. This is the abbreviation for RightSoftKey and LeftSoftKey.
In these directories one find a link to the software which is supposed to start if one presses the left or right softkey.
Somehow my links are broken so I tried to fix them. For example: the left softkey is supposed to start the calendar.
So, this isnt working: couldnt find the directory states the errormessage.
So I look into the Windows directory, found the calendar.lnk and copied it to the directory LSK.
Not working. If I look at the properties of the link in LSK, I see that the file has changed !
Just by copying ...
The properties doesnt contain the necessary information for starting the calendar any longer: shortcut: pooutlook.exe calendar.
Again , these informations get lost just by copying the file into the LSK directory. Editing the link to enter these information isnt possible.
How can I fix this - any idea pleaase ?
regards
Thomas
fischtoeter said:
Hi all,
in the Windows directory you got the directorys RSK und LSK. This is the abbreviation for RightSoftKey and LeftSoftKey.
In these directories one find a link to the software which is supposed to start if one presses the left or right softkey.
Somehow my links are broken so I tried to fix them. For example: the left softkey is supposed to start the calendar.
So, this isnt working: couldnt find the directory states the errormessage.
So I look into the Windows directory, found the calendar.lnk and copied it to the directory LSK.
Not working. If I look at the properties of the link in LSK, I see that the file has changed !
Just by copying ...
The properties doesnt contain the necessary information for starting the calendar any longer: shortcut: pooutlook.exe calendar.
Again , these informations get lost just by copying the file into the LSK directory. Editing the link to enter these information isnt possible.
How can I fix this - any idea pleaase ?
regards
Thomas
Click to expand...
Click to collapse
PS: Interesting is, if I copy th elink to any other place on the phone, e.g. MyDocuments or something like this, the link is always workling ....
Only if I copy it to LSK , not
Ok .. solved, but not understood:
1.) click on directory LSK
2.) chose Property
3.) it says: TYPE: Removable Storage (ROM)
4.) click ok
5.) the direcoty LSK doesnt exist any more - only a new directory with weird combination of figures and letters
5.) renaming this combination to LSK
6.) property says noe: TYPE: FOLDER
7.) copying calendar.lnk into the new LSK folder
8.) pressing left softkey: calendar ist starting
so, its working. Although I really would like to understand why ...
fischtoeter said:
Ok .. solved, but not understood:
1.) click on directory LSK
2.) chose Property
3.) it says: TYPE: Removable Storage (ROM)
4.) click ok
5.) the direcoty LSK doesnt exist any more - only a new directory with weird combination of figures and letters
5.) renaming this combination to LSK
6.) property says noe: TYPE: FOLDER
7.) copying calendar.lnk into the new LSK folder
8.) pressing left softkey: calendar ist starting
so, its working. Although I really would like to understand why ...
Click to expand...
Click to collapse
Well, after a softreset .. same problem: error opening the shortcut or locating ...
Although the properties of the link are ok
vcREG 1.5 for Windows 10 Mobile from http://forum.xda-developers.com/showpost.php?p=64410126&postcount=340 because it was not added to the first post
vcfan said:
ok all fixed up now. ill post new files and instructions again here
vcREG 1.5
-------------------------
it allows restoring loading of old version of ndtksvc that allows unrestricted writing, if you've installed the extras+info update that blocks it.
go to templates, and choose "restore ndtksvc", hit apply, then reboot. now you can load vcreg normally and write to registry again.
for the 950/XL, the process is a little different. go to templates, choose "restore ndtksvc 950", hit apply. connect phone by usb to PC, go to "My PC", open your phone, then in the root directory where you see the folders Documents,Music,Pictures,Videos,etc... make a new folder called "ndtk". now in this folder you need to put a ndtksvc.dll file that you extracted from another lumia rom, like the 1520. put this file ndtksvc.dll in this ndtk folder and reboot. open vcreg and apply interop unlock. how this works is, we tell the registry to load the ndtksvc.dll version from this folder instead of the prebaked restricted one that comes stock.
@dorianmuthig has kindly provided a copy of ndtksvc.dll file in this post #332
Click to expand...
Click to collapse
Attached Files
File Type: xap vcREG_1_5_W10M.xap
File Type: zip files_1_5.zip
Hi all,
I've just encountered weird problem with my Fire Phone. It's on stock 4.6.6.1, rooted with Kingoroot. Everything was fine until yestreday. Gapps have stopped working at all (Google Play says "no connection"). None of gapps mentioned in this forum are working. Another thing is that all tools in my computer say the phone is not in Debugging mode even it is.. Any suggestions?
So finally sorted. Found solution in one thread..
1. Download Total Commander from Play Store.
2. Install it in your Device.
3. Open Total Commander and goto Root of System. (/ )
4. Open the etc folder.
5. Find the file named "hosts", and hold it for 3 seconds. Choose edit file, and choose Total Commander Text Editor if prompted.
6. Delete everything and paste this at the first line: " 127.0.0.1 localhost". Copy it exactly, dont modify anything.
7. Save the file and overwrite if needed.
Easy and fast. Thanks