Ricky Kavana and T-MyFaves - HTC Excalibur

Hi everyone, I am new to the scene and just signed up with tmobile and received my dash today. I immediately flashed the dash with Ricky's Kavana rom and had not setup myFaves. I am not sure how the myFaves works but if I set them up with this modded rom will they register with tmobile as myFaves numbers?

No it has nothing to do with T-Mobiles My Fav plan.
HOW TO SET UP MyFaves
Instructions
==================================
This Part is for thoses how have v11 to v19
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
This part is for if you flashed your phone
============================================
1)Download Total Commander form here http://ghisler.fileburst.com/cebeta3/index.html
2)Install to your phone
4)Open Total Commander
5)Navigate to \Program Files\Excalibur Photo Dialer\ in there youll find lnk files
named Dial_Contact1m.lnk all the way thougth to Dial_Contact12m
6)Now Click File then click 4 (edit)
7)You sould see this 40#"\Windows\VJDialer.exe" +1-555-555-1234"
8)You need to Change +1-555-555-1234" to the number you what
9)Then Click File then Click 2 (Save)
This part is for if you Did't flashed your phone
============================================
1)Download Total Commander form here http://ghisler.fileburst.com/cebeta3/index.html
2)Install to your phone
4)Open Total Commander
5)Navigate to \Storage Card\Program Files\Excalibur Photo Dialer\ in there youll find lnk files
named Dial_Contact1m.lnk all the way thougth to Dial_Contact12m
6)Now Click File then click 4 (edit)
7)You sould see this 34#"\Storage Card\Program Files\Excalibur Photo Dialer\VJDialer.exe" +1-555-555-1234
8)You need to Change +1-555-555-1234" to the number you what
9)Then Click File then Click 2 (Save)
============================================
This part is for v20 and v21
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
1) Go to MyFaves panel
2) Slid you panel to the left untill you get to (6)Change My5 Contacts
-------------------
3) Click on it
4) click edit Click contact1 then click change name now enter your contacts name once you have done that press down twice on your center button then the name will come up on the screen
5) click edit Click contact1 then click change phone click back then enter you contacts number then once you have done that press down twice on your center button then the number will come up on the screen
6) click edit Click contact1 then click Change image then click choose then find you contacts photo in you file system then
once you found the picture press down twice on your center button then the picture will come up on the
7) do the same for all contacts then click save
8) turn off you phone then turn it back on
This part is for if you Did't flashed your phone
============================================
1)Download Total Commander form here http://ghisler.fileburst.com/cebeta3/index.html
2)Install to your phone
4)Open Total Commander
5)Navigate to \Storage Card\Program Files\Excalibur Photo Dialer\ in there youll find lnk files
named Dial_Contact1m.lnk all the way thougth to Dial_Contact12m
6)Now Click File then click 4 (edit)
7)You sould see this 34#"\Storage Card\Program Files\Excalibur Photo Dialer\VJDialer.exe" +1-555-555-1234
8)You need to Change +1-555-555-1234" to the number you what
9)Then Click File then Click 2 (Save)
-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=
these Instructions was made by RickWyatt at xda-developers
http://forum.xda-developers.com/forumdisplay.php?f=309
\05\04\2008\ at 1.13pm
Click to expand...
Click to collapse

But this is not the real myFaves that tmobile phone rom comes with, is this correct?

Correct oh mahn doe

Thanks for posting these instructions. I was about to go bonkers.

Go to this link, download "duprade My Faves" and install it on your phone.
http://forum.xda-developers.com/archive/index.php/t-369500.html
Yo need to go to CHome to configurate "CMyFaves" for the rapid acces to your number and changes the default DIALER (Dialer.exe) by: "My5Dialer.exe;phonenumber" with 1 prefix to the phone number.
Good luck
Adavid

My faves
I tried to install Duprades my faves on my t-mobile dash but it does not show any names or number and i cannot make any calls via myfaves, please help me

when i 1st installed the duprades my faves app it didnt work for me and i gave up but just recently installed it and rebooted my phone then i was sent a txt msg that said your my faves contacts have been refreshed then i went back to my faves app then worked

How does one reset/edit the names on Ricky's v24 with the My-Favs(photo dialer) app. I didn't realize it was putting whatever I typed as the name when I tried to edit the name of one of my contacts. I typed the name in and hit the center button, and it just vanished, so I typed in some more stuff and that vanished too. Now when I restarted my phone, there's a bunch of gibberish text, everything I typed, as the name for Contact 1. I can't get rid of it to add just the name in.

Related

how can a Xda cosmo flash the wm6??

i have a unlocked xda cosmo . when i flash the tmobile wm6 beta , the programm says that the model id is invaliad. i've tried first flashing the tmobile wm5 and than the wm6 , but it doesn't work. does anyone have any ideas?? thanks a lot!
WM6
Hello,
do you have a download link for WM6 ?
Thanks, Newchurch
Newchurch said:
Hello,
do you have a download link for WM6 ?
Thanks, Newchurch
Click to expand...
Click to collapse
take a look at here
http://forum.xda-developers.com/showthread.php?p=1151069#post1151069
james_xl said:
i have a unlocked xda cosmo . when i flash the tmobile wm6 beta , the programm says that the model id is invaliad. i've tried first flashing the tmobile wm5 and than the wm6 , but it doesn't work. does anyone have any ideas?? thanks a lot!
Click to expand...
Click to collapse
Had the same problem with the Cosmo, look here: http://forum.xda-developers.com/showpost.php?p=1151863&postcount=85
Xunil2006 said:
Had the same problem with the Cosmo, look here: http://forum.xda-developers.com/showpost.php?p=1151863&postcount=85
Click to expand...
Click to collapse
yeah!i have emailed imeicheck and they rplied me in 5 minutes!i have successfully flashed my cosmo!!
this is the way to flash it!
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen) 6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
a thousand thanks to IMEI-CHECK~!!
James_xl: Could you please be so kind to share your edited files?
BrumBrum74 said:
James_xl: Could you please be so kind to share your edited files?
Click to expand...
Click to collapse
http://rapidshare.com/files/18907094/ROMUpdateUtility.exe
http://rapidshare.com/files/18907427/RUU_signed.nbh
just unzip the rom you downloaded and replace these two files
It says update utility is too old now.
I read the instructions again and now it worked.
Thanks for the help.
OMFG it worked on my S620! Thanks IMEICHECK!
Nice interface, and you can sync files now!
i tried this several times with no luck. i downloaded the two files and when i tried to run the romupdater prog nothing happens. the program will not start no matter how many times i try. any suggestions?
i think i got it to work now. i had downloaded the two files but had not copied them into the folder that had the extracted rom in it. i was getting stuck at the point where you pull cable out instead of selecting the unlock file. once i had already copied the files over i started all over again and when i got to the step where you disconnect and run the new romupgrade.exe i opened the file where the rom was and clicked the upgrade.exe file and the rest went very smooth and quick.
thanks to everyone that helped out!
but the beta rom is indeed unstable. i hope the final version will soon out!!
james_xl: what problems do you have with the rom?
"4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!"
I've been looking, but where is the unlocker program?
Hello,
you'll get the unlocker program with your imei-unlock-file from imei-check.co.uk.
Newchurch

No voice command after ROM update

I just updated my Tmobile dash to the RUU_Excalibur_HTC_WWE_Brightpoint_US_1.33.422.1_4.1.13.51_03.07.90_Ship ROM and now the voice commands seems to have disapeared.
In the old TMOBILE phone, I was able to see the app and also click on my headset to activate. Now that setting seems to have disappeared and I get the message "no voice tag setup" (or something like that).
Can anyone help me get this working again? It was a great feature which allowed me to call on the fly using only my headset while leaving my phone in my bag.
Forgive me if I am posting anything in the wrong place or re-posting. I am a newbie to this and forum.
Thanks
YOOJ
yoojie said:
I just updated my Tmobile dash to the RUU_Excalibur_HTC_WWE_Brightpoint_US_1.33.422.1_4.1.13.51_03.07.90_Ship ROM and now the voice commands seems to have disapeared.
In the old TMOBILE phone, I was able to see the app and also click on my headset to activate. Now that setting seems to have disappeared and I get the message "no voice tag setup" (or something like that).
Can anyone help me get this working again? It was a great feature which allowed me to call on the fly using only my headset while leaving my phone in my bag.
Forgive me if I am posting anything in the wrong place or re-posting. I am a newbie to this and forum.
Thanks
YOOJ
Click to expand...
Click to collapse
There is no Voice Command in this ROM.
Check out my post here to get it working:
http://forum.xda-developers.com/showpost.php?p=1834188&postcount=154
Voice Command On The New HTC WM6 ROM
boggsie said:
There is no Voice Command in this ROM.
Check out my post here to get it working:
http://forum.xda-developers.com/showpost.php?p=1834188&postcount=154
Click to expand...
Click to collapse
When you install the voice command app to the new wm6 HTC ROM, the way its described in this link, it works like a charm, the same way it does on the T-Mobile wm6 ROM. Just follow the instructions to a "T"....................!
THANKS!!! Worked perfectly..
FYI - you have to remove the shortcut from start folder otherwise you will get an error when trying to copy files into the prog folder.
Then paste the shortcut back in.
yoojie said:
THANKS!!! Worked perfectly..
FYI - you have to remove the shortcut from start folder otherwise you will get an error when trying to copy files into the prog folder.
Then paste the shortcut back in.
Click to expand...
Click to collapse
Yes, that is essentially step 2 in the instructions:
remove the lnk from the Voice Command item in the startup folder​
what is described is changing the extension of the shortcut by removing lnk
Technology said:
When you install the voice command app to the new wm6 HTC ROM, the way its described in this link, it works like a charm, the same way it does on the T-Mobile wm6 ROM. Just follow the instructions to a "T"....................!
Click to expand...
Click to collapse
" T "​
nice ...
something wrong with the second file because i can't extract it.
when i try to , it only extra the direc. file.
drunkenmastera said:
something wrong with the second file because i can't extract it.
when i try to , it only extra the direc. file.
Click to expand...
Click to collapse
dunno what might have happened
I just this very minute downloaded it as a test and it extracted fine for me
maybe try again?
boggsie said:
dunno what might have happened
I just this very minute downloaded it as a test and it extracted fine for me
maybe try again?
Click to expand...
Click to collapse
yea its weird.........
i restart computer and everything. still can't get the files in there.....
any way u can make me a new rar.......
I can't extract either, I'm using Universal Extractor. Whenever I extract, all I get is a readme type file.
I extracted the folder from the second link. When I opened that folder, there is another folder called Voice Command DASH. I opened that folder, and then copied all 34 files to the \Program Files\Voice Command folder. When i try to copy the files from the second link to the program files\Voice Command folder, I get the following message:
cannot copy enu_g2p: There has been a sharing violation. The source or destination file may be in use.
Any ideas?
galatians51 said:
I can't extract either, I'm using Universal Extractor. Whenever I extract, all I get is a readme type file.
Click to expand...
Click to collapse
the second file.
i had to open it in winrar and repair and remake it.
and then it would extract again.
hollywoodstylin said:
I extracted the folder from the second link. When I opened that folder, there is another folder called Voice Command DASH. I opened that folder, and then copied all 34 files to the \Program Files\Voice Command folder. When i try to copy the files from the second link to the program files\Voice Command folder, I get the following message:
cannot copy enu_g2p: There has been a sharing violation. The source or destination file may be in use.
Any ideas?
Click to expand...
Click to collapse
Funny thing is that in the \Windows\Startup folder, I don't see the .lnk. I have unchecked the box to hide extensions for known file type. Also, I just try and copy the shortcut from the Startup folder to my computer desktop and then soft-reset the phone. Everytime I soft reset the phone, it still places the shortcut in the \Windows\Startup folder.
I finally got it to work!!!
Instead of renaming the shortcut from the \Windows\Startup, I went and just copied it to desktop. However, after a few times, I followed the instructions and instead of renaming the shortcut again and adding .lnk to the end, I just dragged and dropped from my desktop to the \Windows\Startup folder.
drunkenmastera said:
the second file.
i had to open it in winrar and repair and remake it.
and then it would extract again.
Click to expand...
Click to collapse
This worked great, thank you!
It is so nice now having voice command again... I bought an adaptor and am using my Dash in the car for music- really awesome to play music using your voice!
boggsie said:
Yes, that is essentially step 2 in the instructions:
remove the lnk from the Voice Command item in the startup folder​
what is described is changing the extension of the shortcut by removing lnk
Click to expand...
Click to collapse
I accidentally deleted the Voice Command lnk file. Can someone send me a copy? Or how can I recreate one? THANKS!

Trouble getting t9 keyboard fix to work

i use activeync like everywhere says and put it in the windows folder or my documents and when I click on it it doesnt give me the option to instal anything. It just has a file that says setup and when you click on it it brings up a bunch of wordss and it has a bunch files with random numbers
thegunna37 said:
i use activeync like everywhere says and put it in the windows folder or my documents and when I click on it it doesnt give me the option to instal anything. It just has a file that says setup and when you click on it it brings up a bunch of wordss and it has a bunch files with random numbers
Click to expand...
Click to collapse
are you by any chance extracting the file when you get it? if so, dont...the setup file you are talking about is an xml file...just leave everything in the cab file
take this file as it is (do not extract/unrar), and transfer the whole thing over to the phone and then run it.
still
I put it in as the rar/zipped file and clicked then it opened it and had a file that said start menu and windows I clicked on start menu and it said my tools clicked again and it said extras and then it had another one of those files with random words.So I went back to the windows file and it had the files etp excalibur 1-6 and then a file that said changer.I clicked on changer and it asked what language.After that it said for everything to take effect I need to reboot so I did that and nothing happend.Is there any way to but back on mobile 6.0 its already been like 5 hours of not being able to use the keyboard??
thegunna37 said:
I put it in as the rar/zipped file and clicked then it opened it and had a file that said start menu and windows I clicked on start menu and it said my tools clicked again and it said extras and then it had another one of those files with random words.So I went back to the windows file and it had the files etp excalibur 1-6 and then a file that said changer.I clicked on changer and it asked what language.After that it said for everything to take effect I need to reboot so I did that and nothing happend.Is there any way to but back on mobile 6.0 its already been like 5 hours of not being able to use the keyboard??
Click to expand...
Click to collapse
if you cant install a cab file then maybe you should switch back. its really this simple. copy the file (unmolested) to the phones \windows directory via activesync. then using resco explorer, browse to \windows on your phone and just click on the file..dont open, dont extract, dont pass go and dont collect 200$. it will install. then reboot and THATS IT. we have all done this 100000 times here so im not buying the fact that you are the one off case where it doesnt work.
look in the sticky's at the top of this forum for the wm6 rom
gixxum said:
if you cant install a cab file then maybe you should switch back. its really this simple. copy the file (unmolested) to the phones \windows directory via activesync. then using resco explorer, browse to \windows on your phone and just click on the file..dont open, dont extract, dont pass go and dont collect 200$. it will install. then reboot and THATS IT. we have all done this 100000 times here so im not buying the fact that you are the one off case where it doesnt work.
look in the sticky's at the top of this forum for the wm6 rom
Click to expand...
Click to collapse
LOL "unmolested"... Classic gixx...
Thanks
I appreciate all the help I dont know why it wasnt working whenever I would click it would open the file and show other ones.I still didnt get it to work so Im just going back to 6.0 Does anyone know if there will be an official update anytime for the device or a dummy proof bugless one for guys like me
Im only 16 I guess I need to grow up a little
thanks a lot bro i need it this,major props to you........

Adding Cities to Touch Pro 2 (Revised for Time Zone Issue)

I modified this post because I kept getting the wrong time zone. And the Conflipper solution failed due to server failure. This is a more reliable way of adding cities.
Follow these steps and you should be fine:
1. Install Microsoft.NET Compact Framework (the current version is 3.5)
2. Install Total Commander
3. In Total Commander, navigate to the Windows directory and find 2330fc3c_manila. Go to the properties of that file and uncheck "Read only". Click ok to save your changes to the file.
3.5 Copy the file out of the windows directory, change the permissions, then copy it back.
4. Download Weather Database Editor (attached in this post) and install. Launch the app, go to your Country> click "Edit" > click "Cities" > click "Edit" > click "Add City".
5. Add your city using the Accuweather code. Example: |NAM|US|NJ|PARAMUS
6. Click OK to save
7. Download and Install sqllite admin (http://sqliteadmin.orbmu2k.de/)
8. Copy 2330fc3c_manila to your desktop
9. Edit 2330fc3c_manila with sqlite
10. Check last fields (timezone and msid) in cities section for your town and copy them from nearest one to your town (geographically)
11. Commit changes to file and copy back to the \Windows directory on your TP2
12. Soft reset your phone.
I'm unable to remove the ReadOnly checkbox from this file, using Total Commander... Do I need to shutdown Touch Flo 3D first?
amcq1010 said:
I'm unable to remove the ReadOnly checkbox from this file, using Total Commander... Do I need to shutdown Touch Flo 3D first?
Click to expand...
Click to collapse
Copy the file to your storage card first. Then remove the read-only property and move back to the windows folder. That should work.
Teddy!!! Thanks a million for helping me resolve my timezone issues.
Great Suggestion. Was definitely able to remove the Read Only once copied over to storage card.
Also, I've now completed the rest of your procedure and have successfully added in the two cities that I needed.
THANKS!
I'm confused. I know, I know follow the directions exactly...
This is for getting custom cities for weather right. Not sure about the time zone stuff.
I used Resco to move/copy/change read only of the 2330fc3c_manila. All worked fine there. Then I used sqllite to edit the file and replaced it. The weather app now recognizes my added cities but gives me the following error,
"There was a connection error while attempting to download weather data. Retry?"
I figured I might have to try Pockethosts as per this post http://www.htc-touch-info.com/en/weather/ but it is not clear if this app works with WM 6.5. Ugh, something so simple is made so hopelessly complex. Thanks in advance.
Solved. Needed to install .NET v3.5 (as the prerequisite for) and the Weather Database Editor. In my case the latter only redirects the location the Weather app is looking for its data.
When I try and edit 2330fc3c_manila with sqllite I get an error. Something like this:
"error: can't perform the operation on a closed dataset"
Thank you very much for this. This fixed this annoying problem!
Maybe someone in HTC should do this for us all. Just a thought.
I was not able to copy/move/paste/change read-only status in any of the ways available to me (including using my computer to remotely copy/move/paste, using total commander, shutting down TF3d etc). I just plain couldn't do it. I have the stock rom for verizon CDMA Touch Pro 2. Anyways, just to let you know, there is another program available on here that did the trick (already in a cab). Here is the link
http://forum.xda-developers.com/showthread.php?t=546141
I hope i saved some people half an hour of trouble at 2am (like me)
FYI, you can also rename the city in the weather tab by typing what you want in the appropriate box. For example, "Dream Vacation in Fiji"... just as long as you leave NAM|***|**|***** the same
How ?
teddy333 said:
9. Edit 2330fc3c_manila with sqlite
10. Check last fields (timezone and msid) in cities section for your town and copy them from nearest one to your town (geographically)
Click to expand...
Click to collapse
I don't mean to complain but I find these directions difficult to follow... extremely frustrating giving the frustrating nature of the issue at hand: this "bug" has driven me CRAZY since I flashed.
"EDIT" how? specifically???
"Check last fields in cities section for your town" what last fields? where is the option for my/nearest town?
in which cities section/in which pop-up hierarchy? indexes > citiesAccuweathercode OR indexes > citiescountry?
I'm not a programmer or a chef so unfortunately nothing in SQLite seems readily intuitive to me.
It would be great if someone who understands this well updated this to be a little more newbie friendly.
THanks
PS-- WHEN I TRIED TO DO THIS PROCEDURE AS DIRECTED HERE I COULD NOT COPY THE EDITED 233... FILE BACK INTO THE WINDOWS FOLDER B/C I GOT "CANNOT COPY/ACCESS DENIED" MESSAGE

X2 Tilewave Daylight Savings Fix

Hi.
I made a quick and crude patch to the TilewavePanel.dll file to cruedly but effectively correct the Daylight savings problem that I and lots of others were having.
----------
To use this...
1. Download THIS - TilewavePanel.dll which is 920KB in size... or use the 355KB ZIP file attached to this post.
2. Copy the new TilewavePanel.dll file to My Device\Program Files\Panels\TilewavePanel. Replacing the original.
-----> You may need to rename the old file first as it is "in use" but it still lets you rename it.
-----> If you are using the basic File Explorer built in to Windows Mobile then you may need to go to the Menu and check Show all Files before the dll files become visible.
3. Go to the Registry using Resco or PHM... Navigate to, HKLM\Software\SonyEricsson\TilewavePanel\City\0, edit the DaylightSaving key and change it to 0.
3. Do a soft reset.
-----> If the time is still 1 hour fast, then go back to the registry and check that the DaylightSaving key is still set to 0.
----------
What this does is... Whenever the Tilewave Panel weather gets updated, instead of overwriting the DaylightSaving key in the registry it writes to a different key DaylighSavinX. But the Daylight Savings time is still read from the original key. So you can change it to 0 without it being overwritten.
Hope this is useful!
Wow, another potential person in XDA
thanks!!
after installing patched DLL panel manager hangs...
panel is not workin after copy .dll file bro
what happen??
Excellent, thanks allot for your updated dll file. It solved my problem with the wrong time and can now have the weather updated automatically
It freezes after a reset?
The patch is tested will all jerpelea's first 5 test ROM.
------------
EDIT: Just tested as working on Jerpelea's 6th test ROM too.
dave-ro-mex said:
It freezes after a reset?
The patch is tested will all jerpelea's first 5 test ROM.
------------
EDIT: Just tested as working on Jerpelea's 6th test ROM too.
Click to expand...
Click to collapse
working very well
i like the way you thinking, making the weather update false string and system still reading the original key XD
thanks!!
Now it works with the same time as on wm 6.5 thanks alot!!!
Works just fine. Cheers mate.
Very good work, mate.
Just like everything in coding, very simple fix. If I knew how to amend .dll files, I would have tried to make it not write to a key at all, and completely remove that line of code.
Thanks for this, makes the panel so much better!
Does not work for me :-(
Yeeeeeeeeees!!!! It works!!! Thank youuuuu!!!
papa Marco said:
Does not work for me :-(
Click to expand...
Click to collapse
Agreed. I can't get this fix to work either. It works until automatic update and reverts back to being one hour ahead.
augie7107 said:
Agreed. I can't get this fix to work either. It works until automatic update and reverts back to being one hour ahead.
Click to expand...
Click to collapse
Sounds like you are not actually replacing the original dll file correctly. As the patch works just fine.
Go to My Device\Program Files\Panels\TilewavePanel.
Make sure Show all Files is checked on the menu. Then rename the TilewavePanel file that is 918K in size to "Old" or "Backup" or something like that.
Then Copy the patched TilewavePanel file from your Storage Card or using ActiveSync to My Device\Program Files\Panels\TilewavePanel.
Soft-Reset the device.
Go to the Registry and Set DaylightSaving to 0.
-------
You can confirm if the patch is installed by... First updating the weather on the Tilewave. Then, going to HKLM\Software\SonyEricsson\TilewavePanel\City\0 in the registry. There should be a new DWord value called "DaylightSavinX". If that key isn't there, it is not installed.
dave-ro-mex said:
Sounds like you are not actually replacing the original dll file correctly. As the patch works just fine.
Go to My Device\Program Files\Panels\TilewavePanel.
Make sure Show all Files is checked on the menu. Then rename the TilewavePanel file that is 918K in size to "Old" or "Backup" or something like that.
Then Copy the patched TilewavePanel file from your Storage Card or using ActiveSync to My Device\Program Files\Panels\TilewavePanel.
Soft-Reset the device.
Go to the Registry and Set DaylightSaving to 0.
-------
You can confirm if the patch is installed by... First updating the weather on the Tilewave. Then, going to HKLM\Software\SonyEricsson\TilewavePanel\City\0 in the registry. There should be a new DWord value called "DaylightSavinX". If that key isn't there, it is not installed.
Click to expand...
Click to collapse
I'm sorry but my ignorance is frustrating me.
First download link is bad. Zip file can't be downloaded to device with IE because it opens straight to Total Commander and won't extract.
Opera 10 Beta keeps hanging up and I can't get it that way either.
Downloaded to PC, extracted dll and emailed it to my account.
Accessed with device and followed instructions. Still not working for me.
Extracted dll is 918.7kb just as original.
Can you possibly enlighten me?
After Hardrest my device it works - only the Mail-Button has no functionality right now.
very very good. thanks, now the panel is useful
Thank you. I love you, mon.
Simply changing the daylight saving time from 1 to 0 or vise versa wortked for me - did not need to change dll.
Ctrl+A said:
Simply changing the daylight saving time from 1 to 0 or vise versa wortked for me - did not need to change dll.
Click to expand...
Click to collapse
Do an update for your weather and check again.

Categories

Resources