Hey everyone... I cant seem to start android. I run Haret and it does the whole text on screen thing, but it ends up with this:
[ 000.000000] Something used micropklt_lcd_ctrl. This function should no longer be used.
Now the 000.000000 within the brackets just increases. thats all it does. it continues scrolling while that number increases over and over and over very fast. (i dont know if it actually starts at 000.000000 but it increases so quickly i am just using the zeros as placeholders for the actual numbers.
Any help?
Edit/Delete Message
I get the same error. Please let me know if you get a fix.
Try reformatting and a fresh install
I have tried that already. I formatted the card completely and tried fresh. Same error. The weird thing is back in december i was able to load the 12/24 build on my phone while running NRG's rom.
I am now running Josh's Perfect 1.7 rom. Could the rom have anything to do with it?
hey im no expert, but the same thing happened to me. I realized that the start up file was not in the root of the SD card. make sure u have the STARTUP.TXT file in the root, the build i was using came with a folder designated startup configuration, and i found the rhodium file in there and copied it to the root.
Hope this helps
Thank you, but i tried that also. and the same problem still occured. I dont know what it is that i am doing wrong. :-\
Maybe this will help
I have 2 Micro SD cards and I can get Haret/Android to boot on my 2GB card but it will not boot on my 8GB card. The 8GB card has all my standard folders and files for my TP2 but the 2GB card was a fresh format with only Haret/Android on it. I loaded up the same files and folders to the root of each of the cards but only the 2GB card will fully boot. For me, this works. I just put in the 2GB card when I want to run Android.
Same thing for me. I used two different cards, the 2G SanDisk worked and 8G Kingston didn't. I bought an 8G SanDisk and now I have two "good enough to boot Android" cards.
My 8G Kingston was nothing but trouble anyway. I bought the 2G SanDisk because I couldn't flash a ROM from the Kingston (which is in my wife's phone now ).
I suggest buying a new card
Thanks, i will try another card. However i am still using the same card i used before when it loaded.
With me, Haret will just randomly lock on boot. Usually, resetting the TP2 then trying a reboot will work.
It's odd. It seems to work sometimes, then not at all.
(BTW, I'm booting off a 16GB SanDisk card)
I still get the error also. I formatted the sd card and I still get the error also. 000.000000] Something used micropklt_lcd_ctrl. This function should no longer be used.
I tried an old build and it works but I can't get the old build to work. Any ideas. This is a Tmobile Touch Pro. I updated the windows ROM to the latest offical build. I also tried it on a custom build with the same error. Any ideas?
when i run the haret program, its says that it can't open the script file. what i am doing wrong?
Newest XANDROID (XDAndroid 2.0.1 (rel 1.5).cab) clean install fixed it for me.
Well, I only had the Problem on my RAPH300. RHOS was working fine anyways.
I have a similar problem, haret runs and the normal linux startup stuff scrolls along until it does a fsck on the sd card. It stops after complaining about not finding rootfs and drops to a bash shell.
I've tried it on two different sd cards with the same result. I've formatted and reinstalled to the same effect. I've tried this with the latest and the next-to-latest xandroid cabs.
Is there something I'm missing after installing the xandroid cab? Perhaps I can pass a command-line parameter to the startup to not run a filesystem check?
Could you plz Post your STARTUP.txt? im just curious and wana try something out.
Damnit... Its still happeneing.. On the newest build (today's build)
I cant seem to get it to work...
I still have the problem also. I tested it with 3/1/2010 build. I formatted the sd card downloaded 3/1 build installed the cab. Soft reboot and ran Haret.exe.
Omega, What ROM are you running? Im on Josh's Perfect 1.7. Im starting to think MAYBE the rom has something to do with it?? (i have absolutely no evidence to back this up, however when i tried an old build while running NRG's rom, it worked, but now, it doesnt.)
I'm on clean official WM 6.5 rom.I recently run eclair on my TP2 and decided to reset back to WinMo.When I tried to boot back to Android,it took me forever to load.Anybody can help?
I got problem with 2gb Kingston microSd, but I tried to load Haret from Sandisk 1gk and Sandisk 8gb and it works fine
Related
I recently upgraded from the Tmobile 6.0 ROM to Rickwyatt's v24 Opera Rom. I followed the instructions posted for "Newcomers" by Mikey1022. Everything work great I really like the 6.1 ROM. But, the Dash no longer sees the 1 GB SD storage card. It should be showing up as "Storage Card" in File Explorer", right? I've looked in every folder and don't see it anywhere. I don't see it on the Dash screen or over the PC using ActiveSync. Oddley enough, when I enable Bluetooth explorer I can see a Storage Card listed in the Menu of File Explorer. When I click on the Storage Card link it takes me to a Bluetooth folder, not what I'm looking for.
I've been using this card for a couple of years and it was working fine before the 6.1 upgrade. I have since tested it in a desk top and in a Verizon Razer phone, it works properly at both places.
I reviewed some other missing storage card type threads in this forum, but never found a solution that works for me. I've even tried formating the card, both as FAT 16 and FAT32. Niether worked, I'm back to FAT 16 now. Some forum suggestions were to reformat the card in the Dash using Resco Explorer, but how do you do that when you can't see the card?
I tried reloading V24 Opera, didn't work. I've tried all varieties of reboots, soft resets, hard resets. Nothing works.
Any suggestions? What am I missing? Is this an issue with V24, should I try another ROM?
Try the Kavana Rom to see if it's the rom or the card?
When you plug your phone to active sync, can you see your card through that?
That is weird because I am running version 24 and it seems to be working fine with me well my storage card seems fine...
Same as jdog never had probs on v. 24
OK, I tried the Kavana ROM. I still can't see the SD card. No, I can't see the card through ActiveSync either.
I guess I'm in the market for a new card, dang it.
Who is the manufacture of it?
i have 4 cards, all different brands and they all show up in v24. maybe a new card would be best...you can get a 1gb for about $5 now
I had a card do that before, so I put it in another phone and it was recognized. I ended up reformatting it and it started working again on my phone.
I bought a great big 2 gb card today, stuck it in, and nothin. Still could not see the storage card in file explorer. The card is a PNY.
So, I flashed back to the T-Mobile 6.0 ROM. Got it from their website. Anyway, tried the old 1 gb card and the new 2 gb card. Still cannot see a storage card in File Explorer or through ActiveSync.
My problem is apparently not with the ROM. I am doing (or did) something wrong. As I said earlier the card was working prior to upgrading to the 6.1 ROM. Is there a setting somewhere to tell the Dash it has a storage card in it. I thought it as a plug and play type thing.
Could it be a hardware issue? I really don't want to crack the shell open looking for loose wires or something.
Any ideas would be appreciated!
PNY cards a crappy. Sandisk it my friend.
The original 1 gb card is a Sandisk.
Both cards are working. And I guess the roms are working to.
What else could be going wrong?
hojo2000 said:
The original 1 gb card is a Sandisk.
Both cards are working. And I guess the roms are working to.
What else could be going wrong?
Click to expand...
Click to collapse
Have you tryed putting any of your cards into a card reader on a computer to see if recognised 'just going over every possibility your cards may be corrupted?'
Sorry just read your post again and it was recognised.
Strange as i have multiple cards of make and sizes and there all recognised.
Long shot try some compressed air. Maybe some crud got in the slot for the mini SD.
take the card...stick it in a pc/laptop and use something like partition magic or paragon to format the card to fat16 or 32. once formatted see if the phone sees it.
other than that...buy a better card...kingston have never failed me nor has sandisk
edit: oh yea...when you format it, make sure you give it a drive letter (such as f...if i dont do that, the phone wont see the card.
I've got a Tilt 2 with hard spl and can flash from my desktop no problem. I'd like to get the flashing via SD card going, but it's hanging.
I've got the nbh file copied to the root of my SD card, get the phone into bootloader, but I see a message flash up about no image. It's very quick though and then the phone hangs in the bootloader. A soft reset fixes it and the phone boots up.
I'm clearly missing something and can't figure out for the life of me what it is.
The image file is named correctly. It was copied to the phone through WMDC to the SD card. Should I put the phone into disk mode a copy the image over?
The SD card is formated in Fat 32.
Any thoughts/Advise?
Thanks.
maybe..
i had this issue before - check your .nbh file with total commander, or put it in your pc and check it. if you name it .nbh with the wm file explorer, it actually ends up RHODIMG.nbh.nbh - solution is just to remove one .nbh!
:::Whimper:::
I'm having this exact same problem!
My RHODIMG file is named correctly and in the root directory (there is nothing else on the SD card either), but I get that same EXTREMELY BRIEF message about no IMG file and then it hangs at the bootloader screen with 'Serial' in the white box on the bottom.
I've even tried using Mobile Flasher, but nothing is working. I
What am I missing??? I've tried it many times already, formatted my card a few times and loaded the RHODIMG file again, but nothing! My Rhodium will NOT connect via USB anymore, so I need to flash via SD card.
Help!
Debbie
I actually don't even rename the file, it's already got that name from the rom. It's e2 manilla 2.5 rom.
I'll try and transfer the file to the card when the phone in disk mode and see if that makes a difference...
O-M-G(!), this is *so* freakin' wacky!!!
I just switched SD cards to one that was larger (8GB rather than the 2GB), that had tons of stuff on it, then copied the RHODIMG file in the root, and then ran 'enablerapinew.cab' again, just for the hell of it...
Damned device found the RHODIMG file there from the bootloader and the update ran as expected, but not on the 2GB card with nothing else on it! WTH?!
Device says that the update is complete, so I'm booting up now and will do a few resets and then perform the tedious task of setting up my Tilt 2, etc.
Don't know whether the cab (thought I only had to run this once when Hard SPLing?) or the different card was what caused it to work, but I hope this helps someone else with the same problem. Whew!
Debbie
...Who's back in business!
SOLVED!
I don't know what caused the magic, but I was able to flash from SD card... FINALLY!
Here's what I did: Flashing Via SD Card Assistance
Hope this helps others!
Debbie
No, this did not work for me. I tried installing the cab again, but no luck, just passes on by saying no image.
Delete image off sd card, reformat FAT32 and copy image back on... I have had this problem myself, it seems that when the .nbh file copies it doesn't register on the card properly or something. Either deleting the file then re-copying seems to work but I still like to reformat too..... DON'T just copy over the top of the image file... THIS DOESN'T WORK... leads to a lot of hair pulling frustration...
Cheers...
So I tried a reformat of the card, just a quick one, not full. Still didn't work. I downloaded another image to try out, the lastest Energy rom, to flash on a completely blank card. That didn't work.
So, I went and got an older card, 8 gig, that is currently being used in a camera. The one I use now is a 16 gig card. This one worked fine.
Conclusions being perhaps a 16 gig card won't work for flashing?
brands
i have heard of certain brands having sizes that didn't work for flashing, for whatever reason. It was a long time ago on my kaiser, so i don't remember which it was, but kingston 2gb comes to mind. like i said, don't know if that is accurate, but there definitely were some that just wouldn't work. perhaps a different brand 16gb?
Well, I used the other memory stick, a Scandisk and this worked fine. Must be something with the 16 gig Kingston disk as it just will not work.
The first week i had the phone i was not rooted and all was well
Then i rooted and flashed a ROM thats when the problems started:
The Problem
~SD card will intermittently will not be readable sometimes in-part or in whole.
~Some time the photo album will say "SD Card unmounted"
~I can how ever reboot and all is well for about 3 attempts of accessing the SD (either by Astro, Gallery, Touitour, or BW pulling skin info off card) then it breaks
~Have tried putting the card in to my PC and i can read it all day long.
~When I conect via usb to view SD card i get the same problems as above
~Using the stock 8g that came with my phone
What i have done
~wipe SD from PC-no help
~wipe SD from Phone-no help
~Flashed 4 diffrent ROMs- no help (and yes i wiped EVERY thing and even tried to reflash)
~Did the "fastboot SD card fix" from XDA forums- no help
~Ask for help with in threads- no help
~Tried a old 2g card-no help
So please help i am getting no where with this...this phone is very frustrating with out SD
*note i have not unlocked Nand yet...
i'm having the same problem you are having, my first rom (bugless v.3 ) was very good, then i flash to bugless v.4 i didn't like and when this is were my problem began. Not saying that bugless rom affected my microsd but after flashing to v.4 now every rom i flash i'm having the same problem. Everything works fine the first few minutes after flashing but then the problem persist. My evo is perfect but now it seems i have to return this to best buy and get a new one before my 30 days is up.
any fix on this
I had same issue. For whatever reason, mine is fine at the moment after flashing the latest damage rom. One thing I did notice, was after opening astro browser, the card would have issues. I had both astro, and es file browsers installed. After I flashed the last rom, I did not reinstall the astro, just the es. This is my second day like this and so far so good.
Another possibility is the sd cards themselves are poor quality. One guy in the damageless thread stated he was having these issues until he put a new sd card in
I bought a 8gb sd card from best buy that came with a USB reader, right clicked on the drive in my computer and chose format, with FAT32, and not the quick format option, phone works fine ever since. maybe just a bad SD card for us? The one with the phone even after I try and format it causes problems but the one thats from best buy is great.
for some time I was using a Samsung 8GB SDHC Class 2 which came with the device.
I have made it a Goldcard, rooted the phone and installed Froyo. then I began to get SD Card Unexpectedly Removed errors after a few minutes of using an app instaled on SD (mostly when I tried to run ColorDict, which keeps dict data on SD). I am not sure, but I think this began to happen when I tried to upgrade to OTA 2.29 and "Red Triangle of Death" (lol) appeared... my Desire was getting unusable as it happened more frequently and required the phone to be powered off and the card to be taken out and insterted again. I tried formatting from Windows level, from phone level, checking for errors, bad sectors etc, but everything failed, so I bought Kingston 16GB SDHC Class 4. and, as you can expect, nothing really improved. well, maybe the errors were a little less frequent.
so I tried to change the ROM, yesterday I have flashed LeeDroid 2.3d No-A2SD, since then the error came twice - first when I tried to wipe sdext in recovery and about five minutes ago, while accessing the card with Root Explorer. I have to stress out that I use the SD intensively through the day as I install apps and test new games. so it seems that the appearence of that error is somehow related to ROM as normally it would happen much more frequently.
did anyone experience similar coincidence?
I have had the SD Card unmount itself randomly before with a custom ROM but it has been a one off. I just rebooted and it was working.
However, your problem is quite extensive. I guess you could just sort of leave it for a whole day not doing anything and see if anything happens. If so, then it could be a number of reasons. Reformat, check for errors (thoroughly), change your ROM to stock and test that out.
Im using a SCLD GSM Desire rooted. Ive used Gingerbread versions of Oxygen, CM7, and currently on MIUI XJ but all freeze up on me often(almost daily) and battery pulls are required to revive.
The freezes do not happen with my 2GB Samsung SD card that came with the phone, but i have used 3 brand new Sandisk 16GB Class 4 SD cards and it crashes on all. This is regardless of whether i have Apps2SD enabled or not. I have looked for last_kmsg after the crashes on CM7 and Oxygen, but the file is never present after a battery pull, if i reboot normally i will get an old last_kmsg file from a few months back.
Was transferring about a gig of music to my phone currently on MIUI XJ 1.12.2, and after i unmounted USB storage it froze up and crashed.
The SD card im currently using was bought at a Virgin store, so im sure it wouldnt be a fake. I hope someone can help troubleshoot, im completely out of ideas!!
Thanks a tone in advance!
zigackly said:
Im using a SCLD GSM Desire rooted. Ive used Gingerbread versions of Oxygen, CM7, and currently on MIUI XJ but all freeze up on me often(almost daily) and battery pulls are required to revive.
The freezes do not happen with my 2GB Samsung SD card that came with the phone, but i have used 3 brand new Sandisk 16GB Class 4 SD cards and it crashes on all. This is regardless of whether i have Apps2SD enabled or not. I have looked for last_kmsg after the crashes on CM7 and Oxygen, but the file is never present after a battery pull, if i reboot normally i will get an old last_kmsg file from a few months back.
Was transferring about a gig of music to my phone currently on MIUI XJ 1.12.2, and after i unmounted USB storage it froze up and crashed.
The SD card im currently using was bought at a Virgin store, so im sure it wouldnt be a fake. I hope someone can help troubleshoot, im completely out of ideas!!
Thanks a tone in advance!
Click to expand...
Click to collapse
which version of MIUI-XJ ie.. A2SD or XPart or D2W?
You can try the following:
1. take nand backup, titanium backup & miui backup
2. download the full rom
3. full wip/wip cache/wip dalvik
4. flash the rom, if you are using cm7r2 hboot you might have to flash market cache fix.
5. let the rom reboot automatically and then let it settle for 15-20 mins
6. go to super user and make sure you enable ROOT permission ON.
7. power-off and power-on, restore your apps.
Thanks for help, appreciate it. I'm running the apps2sd version. Will flash according the method you have suggested. Since I'm on apps2sd, any reformatting/repartitiin you recommend?
Right now for the 16gb class 4 card I have a 1gb ext3 partition created using gparted.
You partitionend your SD card with an FAT32 partition and an EXT partition. If you partitionend in that order and set both partitions primary, you are ready for A2SD/A2SD+.
But please use "A2SD" if you are talking about the script which moves apps automatically to EXT partition, because with "app2sd" you could also mean the FroYo-App2SD and this would be very confusing.
Thanks for the help guys. I repartitioned and reflashed miui according to the procedures you'll mentioned. So far its been running fine, except that I had to use the terminal to reinstall a2sd yesterday, but still no crashes.
So far I have not put any music on the phone since last time it crashed when I filled up the SD. Now that I'm certain the installation is clean after using it for the past few days, ill go ahead and fill up some muswic tomorrow and will post back here.
So the phone crashes everyday now. Noticeably after I enabled a2sd amd moved dalvik.
Need to perform battery pulls to revive the phone and there is no last_kmsg after a reboot.it really kills me everytime I need to pull out the battery, hopefully someone can help troubleshoot!
I have the same problem. It's do not freeze only with stock hboot
Since I'm rooted on custom rom, any way to use a stock hboot now?
yes, you can use any rom with stock hboot. but you will not have much memory for applications
just checked, im on stock hboot.
do you have any other ideas ?
maybe here: http://forum.xda-developers.com/showthread.php?t=1393132
After failing to get 3 of my 16gb sandisk cards working, I tried my Samsung 2gb that came with the phone. This card is working flawlessly for the past month (or however long its been). I'm using a 512mb partition with apps and cache moved to SD with zipalign running and its never crashed.
Does anyone have any ideas? Can't really load any music into such a small card
I have a similar problem.
My phone crashes every time I browse fast trough my picture gallery (I have a lot of pictures) or I use an app that accesses the SD card continuously for several minutes.
For instance, it happens when I do a batch backup with Titanium Backup for all my applications.
I tried the official ROMs and custom ROMs (Cyanogen, DevNull) but the problem persisted.
I sent the device to HTC and they replaced the mainboard.
I tried then the latest official ROM and I faced the same problem.
I switched again to Cyanogen and the same problem appeared.
I have to mention that all this time I used a 8GB SD card (I tried several different cards with the same result) and no App2SD.
Now I'm using the card delivered by HTC together with the device and the problem is gone.
This card is only 4GB (the brand is Samsung) but it seems to work flawless.
My advise is to try a 4GB card and see if it works.