Related
Hi,
Does anyone know of any app that restricts data connection to only when in WCDMA (UMTS 3G) network?
Reason why is that i use my Dopod D810 to surf the net and download files. However i have managed to rack up $320 in roaming charges for internet usage even though i am on a 1 GB XSeries plan on 3.
I was not aware that i was roaming at all. So in future, i want my phone to automatically disconnect when "Roaming".
Is there such an app? I have tried Bandswitch but i couldnt get it to do what i wanted.
use search.
There is an app called trinity hacks or something that adds this feature.
Are you sure? I have Trinity Hacks v0.3 and it doesnt seem to have this feature.
What i want is for my phone to automatically disconnect once it is "roaming" onto Telstra's network from the 3 network.
Yes,
Trinity Hacks v0.3 --> Phone tab --> 'Enable GSM/UMTS Band Selection'
Ticking this enables a new tab under 'Settings' --> 'Phone' --> 'Band'
Switch it from 'auto' to 'WCDMA'
Then you will never incur roaming charges on Telstra network.
Yeah i already have that setup.
What i want is to be able to Roam to Telstra so i get full PHONE coverage, but once it goes to roaming, i want the data connection to automatically disconnect.
What you have asked me to do is to permanently connect only to 3G which means i cannot get reception everywhere.
Does that make sense?
What you want is not possible without some serious programming! The Radio stack can be set to connect to GSM, UMTS/WCDMA or either, but you can't split voice and data functionality.
Hi,
Thanks for all your replies, but im not asking for voice and data functionality to be split. The phone can already tell whether it is roaming or on the home network. Isn't it just a matter of getting this information from the phone possibly via the OS API and then when the phone returns a value to signify that its roaming, then the program will disconnect the connection, just like pressing the disconnect button, but this time programmatically?
Im not asking for someone to write something like this, but if something already exist like this.
Maybe this reply is not needed anymore sinds the thread is one month old. Still, I use spb grps monitor. It has a lot of customization option. Maybe it has a feature that will do the trick. I'm not going to look into it myself. Just wanted to give you a headsup.
for some reason, my phone keeps going to 'no service'. i have set it to gsm for network type and auto for gsm/umts.
i installed the no data cab because my phone always keep getting connected to the internet after turning off data connection and 3g. i even went into task manager and i don't know what else to disable that connects to the internet. that's why i installed the no data cab.
after installing the no data cab i noticed the 3g is turned on in communication manager, and i get the bars and see the big H. i turn off the 3g, and then i get no service, but then no service again.
i then went into network connection and chnaged gsm to auto. and now it works with the big H and the 3g is turned on, but even when 3g is turned on, i can't connect to the net unless i toggle in the no data cab program.
anyone please help!
radio issue?
do you think it's a radio issue?
i think its just telling you that ur in a 3g/HSPA area not that ur actually connected to 3g
but it didnt do that before, it would just be no service and I would have to change to 3g..not sure why.
True, the 3G or H icon will sometimes show up to tell you that those signals are present, even if the phone is not actually connected to them.
The toggle in the Comm Manager is basically useless. It will connect automatically if you open your browser or other program that uses the data connection, even if the Data Connection is toggled "off". The only exception is if you are Airplane Mode.
If I remember correctly, you also need to toggle the Data Connection off in the Comm Manager, after you toggle "off" in NoData. I don't think NoData can shutdown a data connection that is already open. So I guess the bottom line is that you have to use BOTH the Comm Manager and NoData to toggle the data connection off and on.
radio reflash
So the odd thing is, no issue occured after I reflashed a different radio. Maybe it was the radio? But yes, I do have to use NoData and CommManager together. I had to soft reset after installing.
I recently received a T-Mobile Touch Pro 2 cell. I'm NOT paying for web service and would like to only use Wi-Fi. If I disable my data connection under the communication manager, would this mean that I will not be using T-Mobiles web service and only my Wi-Fi? Can I still receive calls/text messages when the data connection is set to off? Do I have to worry about the data connection setting automatically turning on by itself for whatever reason?
DADDYDC650 said:
I recently received a T-Mobile Touch Pro 2 cell. I'm NOT paying for web service and would like to only use Wi-Fi. If I disable my data connection under the communication manager, would this mean that I will not be using T-Mobiles web service and only my Wi-Fi? Can I still receive calls/text messages when the data connection is set to off? Do I have to worry about the data connection setting automatically turning on by itself for whatever reason?
Click to expand...
Click to collapse
Yes.
Yes.
Yes.
Flipping that switch manually turns off your phone's 3G connection, and you can still make/receive calls/sms. However, as soon as some app or process needs a data link (ones that don't/won't use the wifi connection), it will flip that connection right back on.
sirphunkee said:
Yes.
Yes.
Yes.
Flipping that switch manually turns off your phone's 3G connection, and you can still make/receive calls/sms. However, as soon as some app or process needs a data link (ones that don't/won't use the wifi connection), it will flip that connection right back on.
Click to expand...
Click to collapse
Which apps do I have to worry about flipping the connection on? I only plan on surfing the web and I don't plan on setting up my e-mail account. I only want to text and browse the web using my TP2. Thanks for the response.
DADDYDC650 said:
Which apps do I have to worry about flipping the connection on? I only plan on surfing the web and I don't plan on setting up my e-mail account. I only want to text and browse the web using my TP2. Thanks for the response.
Click to expand...
Click to collapse
Well Google Maps for one, it insists on downloading through your 3G data connection even if you're connected to wifi. There may be others that will ignore a wifi connection and fall back on 3G, I don't know off the top of my head, you can dig around here some to see if there's any reference to that (I know I've seen it, just don't have it bookmarked)
Yes, some apps are automatically enabling the data connection.
My solution:
go to Settings > Connections >
and delete the 'data connection' for your provider.
Their you could also go to advanced and choose which networks will be used for what type of connection; play with it.
The data connection isn't used for 'calls', only if you are calling over IP (skype e.g.)
With a program like SPB wireless monitor, you can see which connection has used how many bandwidth.
HTH,
Fossie
fossieniel said:
Yes, some apps are automatically enabling the data connection.
My solution:
go to Settings > Connections >
and delete the 'data connection' for your provider.
Their you could also go to advanced and choose which networks will be used for what type of connection; play with it.
The data connection isn't used for 'calls', only if you are calling over IP (skype e.g.)
With a program like SPB wireless monitor, you can see which connection has used how many bandwidth.
HTH,
Fossie
Click to expand...
Click to collapse
How do I go about deleting the data connection from my provider? I'm lost!
There is an easier way. Use the Modoco NoData cab and it turns off the data connection until you turn it back on. This way if you decide that you want to use the data later you dont have to find out and enter your settings again.
It works very well.
For those who want to restrict the data to thier home carrier ie: no roaming the Dynamic+ NoDataInRoaming is ideal as it automatically switches on and off when you enter and leave your home area.
When I read the HTC Desire user manual, it said that I need to turn on the "Data Connection" setting to have internet connection.
Well, this is understandable ... but, does it has automatic connection on demand?
On Windows Mobile, I dont have to specifically turn on data connection. Whenever an app is trying to reach the internet, it will turn on the data connection automatically.
And of course, it will turn-off the data connection automatically as well, when there is no internet network activity.
Does this also the same in Android?
It should turn on automaticly when you try to use online services...
But you can turn it on in Wireless & Network
You have to option to turn mobile data off, that is why it specifies that you need a data connection.
If you do not turn it off, apps that require internet access will use it with no further interaction.
By default MENU -> Settings -> Wireless & networks -> Mobile network was off on my device, meaning it would not connect to internet via 3G (I could still make/receive calls). However, I chose to use WiFi for set-up when I first started the phone, so maybe that's why.
Anyway, I guess that is the setting they are talking about.
Thanks for your information, but that raise a question:
When I switch off the data connection and also switch off the background data option.
Will the HTC Weather widget (and other similar widget) still work with auto-updating periodically?
Zappza said:
You have to option to turn mobile data off, that is why it specifies that you need a data connection.
If you do not turn it off, apps that require internet access will use it with no further interaction.
Click to expand...
Click to collapse
gogol said:
Thanks for your information, but that raise a question:
When I switch off the data connection and also switch off the background data option.
Will the HTC Weather widget (and other similar widget) still work with auto-updating periodically?
Click to expand...
Click to collapse
NO... they need either 3G or WiFi connection to update...
So, that means ... those apps cannot wake up (turn-on) the data connection automatically if needed (on-demand) ...
pantera70 said:
NO... they need either 3G or WiFi connection to update...
Click to expand...
Click to collapse
I do remember the old days of the HTC Hero which had the option of background data usage. I think that was more to do with the version of Android than anything else. I recently had the Nexus One and on the new 2.1 version of Android, you can either switch data on or off, no automated connections on data usage.
When the phone is sleeping (screen off) nearly everything is powered down anyway, even if the data connection is 'on'. Apps will wake the device (an power up radios as required) to do their updates when they need to.
gogol said:
So, that means ... those apps cannot wake up (turn-on) the data connection automatically if needed (on-demand) ...
Click to expand...
Click to collapse
The whole idea of being able to turn your mobile data connection off is to disable mobile data completely. This is a very good option if you are roaming in a foreign country or don't have a fixed data plan.
If you leave the mobile data connection to enabled, applications will "turn-on" the data connection if needed (on-demand). In other words, if the mobile data connection is enabled, the mobile data connection will be in standby, waiting for applications to request use of the connection.
Hope this clarifies it for you, as you appeared to misunderstand my last post.
Ok then
I think it has different meaning compared to the Windows Mobile.
In the COMM MANAGER, there is "Data Connection" toggle which normally is OFF. And this does not mean that the device cannot use 3G data connection.
While on Android, its data connection toggle setting means to enable or disable 3G data connection completely.
I think that is the difference, if we look from Windows Mobile point of view.
Thanks.
Zappza said:
The whole idea of being able to turn your mobile data connection off is to disable mobile data completely. This is a very good option if you are roaming in a foreign country or don't have a fixed data plan.
If you leave the mobile data connection to enabled, applications will "turn-on" the data connection if needed (on-demand). In other words, if the mobile data connection is enabled, the mobile data connection will be in standby, waiting for applications to request use of the connection.
Hope this clarifies it for you, as you appeared to misunderstand my last post.
Click to expand...
Click to collapse
I have a Verizon G4 and have one major gripe.
At my workplace, the wifi is somewhat spotty and it's a guest network that requires authenticating (clicking an "i agree" button)
So my phone will, throughout the day, as it detects the "weak" signal, automatically turn off that network due to "unreliable internet connection".
Even as I'm back in an area with a strong signal, now my phone is ignoring that and stuck trying to use mobile network. I have to go into my network list and manually tell it to reconnect.
During all of this, wifi is enabled the entire time.
I see where others have had the same problem on other phones and have turned off "Smart Network Switch" and I even read where someone had done this on a LG G4 (not verizon).
So I'm thinking this is something Verizon removed. Anyone have any ideas?
Smart Network Switch is just a feature that checks for a "data" connection over wifi and switches to use Mobile Data if WiFi loses internet access.
I am not sure the G4 has this. When I am connected to WiFi with a bad signal, it will just send me a popup telling me the WiFi has no internet access and whether to use Mobile Data or not. The feature you are looking for is "Avoid bad WiFi Connections", which is the same thing with a different name. Just make sure that is OFF. That will force WiFi to use WiFi as the only connection.
And it sounds like your wireless network sucks and needs to be upgraded to a corporate solution.
Just FYI, in my WiFi > Advanced WiFi settings, I have everything unchecked + "Keep WiFi on when screen is off" = Yes.
Well "avoid bad Wi-Fi connections" is off. Read on another forum that the mobile version I think it was had the smart network option.
I have the same options as you except I also allow Wi-Fi scanning.
I have tried with that one both on and off and see the same behavior.
I never get a popup, it just ignores that wifi connection and used mobile data. When I look at my Wi-Fi list, it'll say something about unreliable internet connection in small text,on the Wi-Fi network that it disconnected from. Surely I'm not the only one seeing this.. :/
Beats me. Sounds like the Access point you are connecting to has a bad internet connection. What is happening is you are connected to the WiFi and it notices that the WiFi AP is either dropping internet connection (Google pings google servers to test connections) or bouncing.
In order to keep from losing a data connection, it seems to be switching to your cellular network.
I see this often because we install APs (I am a network engineer). I think your phone is trying to protect you and that is normal behavior. Here is another scenerio: In a hotel, wifi is always set to OPEN. If your phone automatically connects to the hotels network, you will lose a data connection because Hotels require you to "sign-in", just like most free wifi places do. The phone sees that your phones WiFi connection is not accessing the internet and making sure you are good.
I am not sure how often it "checks" the wifi for a good connection or if it ever does once it switches.