Develop Bugs

My MDA Pro start up screen as Imate, Can I change?

I have upgrade my MDA Pro from German rom to English, but the start up screen is Imate, anyone can tell me how to change back to T-mobile?

check the blue angel forums, there is something there, or was it the xda ii forum (cant remember proper name for those).
try it and report back ;-)
mine's returned as faulty so I can't help.

how did you did the upgrade ? didn't you got the country error ?

i to want to know this
i get country id error

we need the string from running getdevicedata on mda pro and jasjar.
can anyone be so kind to do this and post the result. it's a txt file.
thanks

Update
Hello I updated my MDA pro with the Jasjar update.
I unpacked the romupdate with winrar and replace the ROMUpgradeUt with the MaUpgradeUt_noID that you can download in this section of the universal pages.
The first time you start the update it wil tell you the your countrycode isn't right. but it wil shift in to bootloader mode and when you start the update the second time it wil update your ppc without problems. Do not reboot after the first update but just try it again in bootloader mode.
Good luck it works like e clock and You get MSN, SKYPE and even a version of etrust antivirus that you can install.

what do you mean by
" Do not reboot after the first update but just try it again in bootloader mode.
"
and how are you reseting the device ?

i did it 10 times.
i'm stuck into bootloader.
the upgrade with the patched file works 100% but then ...
when i'll pull of the usb cable and try the reset (power + reset) or it is not working
any ideeas
thanks

decebal said:
when i'll pull of the usb cable and try the reset (power + reset) or it is not working
Click to expand...
Click to collapse
What about softkey + softkey + reset like the updater suggests?

Re: Update
gpsenzo68 said:
Hello I updated my MDA pro with the Jasjar update.
I unpacked the romupdate with winrar and replace the ROMUpgradeUt with the MaUpgradeUt_noID that you can download in this section of the universal pages. .
Click to expand...
Click to collapse
Hello!
Is the correct file there uploaded. I was trying it but is seems to be for the
Magician. No luck for the MDA Pro.

nope. not working.

Update
For me it worked like a charm
Even with the radio update
So I can't see why it won't work with you

Upgrade
I'll try and explain again my way of installing:
I downloaded the update from Imate I unpacked the update and then I unpacked the executable with winrar. In the directory where the exe is unpacked I put the patchfile the I have uploaded for you (unpacked offcourse).
The I used that patchfile to start the update the first time it shuts down active sync 4.0 and reconnects in bootloader mode. You get a countrycode error.
the MDA is still in bootloader mode.
Now i restart the update and the install begins after the update you can reset your MDA pro. and it wil come with a IMATE splashscreen whereafter you can select your networksettings from your phonecompany.
then it wil install the new cabfiles from the rom.
That's how it went with my installation.

gpsenzo68
Isnt you mda pro a wwe rom already?

Re: Upgrade
gpsenzo68 said:
I'll try and explain again my way of installing:
I downloaded the update from Imate I unpacked the update and then I unpacked the executable with winrar. In the directory where the exe is unpacked I put the patchfile the I have uploaded for you (unpacked offcourse).
The I used that patchfile to start the update the first time it shuts down active sync 4.0 and reconnects in bootloader mode. You get a countrycode error.
the MDA is still in bootloader mode.
Now i restart the update and the install begins after the update you can reset your MDA pro. and it wil come with a IMATE splashscreen whereafter you can select your networksettings from your phonecompany.
then it wil install the new cabfiles from the rom.
That's how it went with my installation.
Click to expand...
Click to collapse
This worked for me as well. This first time I tried to run it I got a incorrect ROM version error message. Than I found out that I renamed MaUpgradeUt_noID.exe into MaUpgradeUt.exe instead of ROMUpgradeUt.exe. After renaming the file correctly gpsenzo68's explanation works just fine!
The first things I notice with the new imate ROM:
MSN (messenger works without having to buy the app (can sign in )!), Skype, Backgammon, more program memory, got rid off T-Mobile dialer skin, media player fullscreen stretch bug has not been fixed in this release.

MDA PRO ROM
MY ROM WAS THE ORIGINAL ROM FROM T-Mobile and now its a wwe rom

original german or english rom?

MDA Pro
NL Rom as you can see ;-)) So English

will your updated in this topic works
but it wont start after its done
its just says bootloader.
i really need the new updater to be hacked
it gets a string from the device.
someone able to hack this?

HOW TO: Rom Upgrade - Universal / XDA Exec

Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.

Thanks.

Thanks!
There is only one thing, step 4, it is not USB but Serial.

Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.

It doesn't seem to work with last Qtek 9000 ROM...
Help!

OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.

cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted

Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.

someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."

thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems

Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve

Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!

Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care

Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?

Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot

Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.

Many thanks! PU10 by German T-Mobile upgraded to WWE

I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?

Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers

Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse

O2 Xda Zinc, How To Enter Bootloader,Plz?

I have a completely dead O2 Xda Zinc..probably caused by software...can someone tell me how to get to bootloader mode so I can try to update rom?..thanks

you need to have the abi files update for your O2 zinc that need only to load to your mini SD. and after power on it will automatic detect by your zinc

windelas said:
you need to have the abi files update for your O2 zinc that need only to load to your mini SD. and after power on it will automatic detect by your zinc
Click to expand...
Click to collapse
i have a similar problem with a dead O2 XDA Zinc...where do i get the abi file or can i make one from the wm6 upgrade file (Xda_Zinc_RM3070712_WWE_ExtV2.8.0.exe) that i download from the official website

the abi file can be found inside the exe but i dunno how can u extract it since if u use any extractor it will not give u the abi file ... also if u hv the raw rom & want to extract the rom also u will hv difficulty in extracting it
that is the problem that i am facing now

you can extract abi file from Xda_Zinc_RM3070712_WWE_ExtV2.8.0.exe by
1. connect o2 zinc with usb
2. flash your o2 zinc by exe file
3. when complete flash don't push finish button
4. select to view hidden files in folder that you put exe file
5. finally you will see marsii_g4.abi
goodluck & sorry my bad english

the .abi file in rapidshare
http://rapidshare.com/files/91371327/MarsII_G4.rar.html

unable to open registry key
hi kindly help me with my xd zinc problem w/ rom6. My unit suddenly crashed while in standby mode then i reset it then the setup was changed. the programs i installed suddenly became resident applications. Meaning ithey don't appear anymore in the storage memory unlike before that i can easily uninstall them. Now i dont know how to install them to install new softwares because the memory is low. then a message error "unable to open the registry key" appears everytime i reset.
What happened and what should i do?

ronald_di said:
hi kindly help me with my xd zinc problem w/ rom6. My unit suddenly crashed while in standby mode then i reset it then the setup was changed. the programs i installed suddenly became resident applications. Meaning ithey don't appear anymore in the storage memory unlike before that i can easily uninstall them. Now i dont know how to install them to install new softwares because the memory is low. then a message error "unable to open the registry key" appears everytime i reset.
What happened and what should i do?
Click to expand...
Click to collapse
reset meaning soft or hard reset?

hard reset or soft reset both does not do any good to remove the error message "unble to open the registry key" and to just reload the orginal applications and remove the others

ehmmm ... sad to say maybe u hv to flash the rom

how do i flash the rom?

download the official rom from seeo2 and then make sure ur dev is fully charged ... sync it wz ur pc using active sync then execute the rom (.exe file u hv downloaded)
good luck

Hi guys,
I've already upgraded to WM6 for my Zinc, but I'd like to have an original ROM in case I need to flash back when something's wrong. I checked seeo2 but I can't find it.
Pls tell me where I can find this original ROM (WWE) ???
Thanks

LeoDH said:
Hi guys,
I've already upgraded to WM6 for my Zinc, but I'd like to have an original ROM in case I need to flash back when something's wrong. I checked seeo2 but I can't find it.
Pls tell me where I can find this original ROM (WWE) ???
Thanks
Click to expand...
Click to collapse
original rom? WM5 ... u can get it at the site also

cruzzmz said:
original rom? WM5 ... u can get it at the site also
Click to expand...
Click to collapse
You mean the WM5 ROM on seeo2? It's still an upgrade ROM, not the original that comes along with the device at the beginning.
Anyway, I'm a newbie so please advice how to 'downgrade' from WM6 to WM5? Is this similar to the process upgrading from WM5 to WM6 (you just sync the device with PC, run the .exe file on the PC and let it go)?
If it's not, please kindly give me detail instruction
Many thanks

My FSC-n560 is bricked. Help please!

Hi!
I was using Newplow's WM6 038 ROM with my N560.
Yesterday I tried to write another ROM(WM6 038 with 8MB pagepool) but during update got an error.. It said it just failed.
Now my N560 is stuck on booting screen(people climbing mountain..)
I tried Warm, Cold, Hard reset but with no luck.
Even the power button doesn't work so I had to remove battery. When I insert battery it powers on by itself.
I can enter bootloader screen by pushing power+record button so I tried to copy rom image file to SD card but it doesn't work.
I tried two ROMs(OS_213U.nbf from Original WM5 ROM and Newplow's) and 3 SD Cards(2GB SD, 1GB MicroSD with Adopter, 16GB SDHC)
Is there any recovery tutorial in bootloader mode?
Help me please!
Sorry for my English.

Have you tried flashing a ROM through the computer rather than the memory card? Try going into bootloader and flashing that way rather than the card.

The pagepool ROM is meant for N560s that have been upgraded to 128Mb RAM... have you upgraded the internal RAM to 128Mb? If you have not, then this may have caused your problem.
I had this problem when flashing to 038 normal RAM (from 035). A hard reset reset to the normal start screen, but nothing worked. However, trying a new burn with the Loox flash tool restarted the process and it worked. I found the cure was to make sure you hard reset the N560 before doing a burn. It appears to be that you have to do this to release enough RAM for the burn program to reside and for "working" storage. You may not have done this.
I suggest you try simply re-running the flashtool with SD/SDHC cards removed, battery in place, on the cradle via your PC, even though it appears stuck. The signals coming from the USB link may wake up the bootloader routine in the N560?

Solved the problem! Thanks for your comments!
I asked same question in Newplow's guestbook and the person who made pagepool rom answered. I used MTTY to revive my pda.
What I did is in below post. need translation
http://4pda.ru/forum/index.php?showtopic=55274

Hi all,
I have the same problem. N560 is stick on the himalaya picture. I tried to falsh from WM5 to new rom for Wm6 and after installation the pda stuked. So I did a warm reset and now only the start picture is apperaing. Problem is that battery is down now.
Can someone give more info on the process followed to revive the PDA ? I just cannont read russian (may be Jinsu77 ?)
Many thanks for support in advance

same problem here please please please someone help us
the only thing i can do is the l c:\os_213u.nbf on mtty program and nothing else happend to the machine
sorry for my english

read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.

It was me asking on Newplow's guestbook.
In case you're using Vista, you need some trick to be able to rom update. Read below.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
And then you need to download MTTY (I used version 1.42, got it by googling) and follow below steps.
(used google translation from 4pda.ru)
------------------------------------------------------------
For rom update without ActiveSync.
1) take this set of extract, copy it to the folder with the firmware.
2) copy the file os_213u.nbf example in C: \
3) You press the button Recorder + food and poke in the hole reset (Recorder button and hold until you eat dolphins)
4) plug the device to a PC, the Task Manager, shooting process - wcescomm.exe
5) Run mtty, choose Port: USB, connect.
6) If mtty caused an error and shut down, simply restart mtty, if not typed commands, then repeat the procedure with paragraph 3.
7) in mtty command, enter: (first letter in kommande - a little l l от слова from the word L L oad)
> l l c:\os_213u.nbf c: \ os_213u.nbf
Since the end of the process will be an inscription about the error, remove the device from the PC.
9) Run rom update, zhmete "next", until you see dolphins.
10), plug the device to a PC and program.
---------------------------------------------------------------
Hope this helps you all

in advance sorry for my english
I am doing all the instructions carefully and the mtty show this
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,1A0F023Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
the pda shos the dolphins and the full blue bar
after without change anything i run the PocketLOOX5xxFlashTool that i have in the same folder with the :
EnterBootLoader.exe
OS_213U.nbf (originally rom)
RUUServer.dll
RUU.dll
and the only thing i can see is that the PocketLOOX5xxFlashTool is trying to find the pda without any luck
also the pda is stucked in the same screen with the dolphins and the blue bar
do you see any mistake in this procedure

Helppp!!! please

tuluba said:
Helppp!!! please
Click to expand...
Click to collapse
have you closed EVERY process of activesync before proceding with mtty?

I close the wcescomm.exe and the rapimgr.exe is there anything else?

The pocket LOOX 5xx FlashTool cant connect with the N560 and at the and says that Error"The language in this Flash Image update (ENGLISH) differs from that on your device()!" and i have always english rom exept maybe from the last rom "the killer" with the 128MB rom that i dont know if it is an english or something else because the device never opens to see

After flashing in MTTY(don't care about error messages), you need to unplug your n560 from PC. And then proceed romupdate until you see the dolphin picture. Now you plug n560 to PC and cilck next and wait for a while.. Hope it works!

I change the language of the rom and it works
thank very much all of you

At all they have Probs with flash from SD Card: only use a Card with 512MB! I think a Card greater then can't read by the Bootloader....

hey.
i am compeletly new here. I have the same with my n560. I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP

if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)

Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????

ChrisDo said:
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
Click to expand...
Click to collapse
You can usually get back to the boot loader if you do a hard reset. I am sure you know how, if not you will find it in the FSC CDROM manual that came with the device. Let us know if this works? I have got stuck at this point too, so I know it works..... hopefully!

How to upgrade ROm with nbh file

As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).

The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.

thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted

stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .

You can download my ROMs, they come with the full package

trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help

stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...

stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?

Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP

Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.

strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?

Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.

From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.

thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading

stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )

Lol I can't belive I forgot to tell you that!

It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?

Thank you, here you go!

sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!

nevermind, it worked ok on the second attempt!