I have upgrade my MDA Pro from German rom to English, but the start up screen is Imate, anyone can tell me how to change back to T-mobile?
check the blue angel forums, there is something there, or was it the xda ii forum (cant remember proper name for those).
try it and report back ;-)
mine's returned as faulty so I can't help.
how did you did the upgrade ? didn't you got the country error ?
i to want to know this
i get country id error
we need the string from running getdevicedata on mda pro and jasjar.
can anyone be so kind to do this and post the result. it's a txt file.
thanks
Update
Hello I updated my MDA pro with the Jasjar update.
I unpacked the romupdate with winrar and replace the ROMUpgradeUt with the MaUpgradeUt_noID that you can download in this section of the universal pages.
The first time you start the update it wil tell you the your countrycode isn't right. but it wil shift in to bootloader mode and when you start the update the second time it wil update your ppc without problems. Do not reboot after the first update but just try it again in bootloader mode.
Good luck it works like e clock and You get MSN, SKYPE and even a version of etrust antivirus that you can install.
what do you mean by
" Do not reboot after the first update but just try it again in bootloader mode.
"
and how are you reseting the device ?
i did it 10 times.
i'm stuck into bootloader.
the upgrade with the patched file works 100% but then ...
when i'll pull of the usb cable and try the reset (power + reset) or it is not working
any ideeas
thanks
decebal said:
when i'll pull of the usb cable and try the reset (power + reset) or it is not working
Click to expand...
Click to collapse
What about softkey + softkey + reset like the updater suggests?
Re: Update
gpsenzo68 said:
Hello I updated my MDA pro with the Jasjar update.
I unpacked the romupdate with winrar and replace the ROMUpgradeUt with the MaUpgradeUt_noID that you can download in this section of the universal pages. .
Click to expand...
Click to collapse
Hello!
Is the correct file there uploaded. I was trying it but is seems to be for the
Magician. No luck for the MDA Pro.
nope. not working.
Update
For me it worked like a charm
Even with the radio update
So I can't see why it won't work with you
Upgrade
I'll try and explain again my way of installing:
I downloaded the update from Imate I unpacked the update and then I unpacked the executable with winrar. In the directory where the exe is unpacked I put the patchfile the I have uploaded for you (unpacked offcourse).
The I used that patchfile to start the update the first time it shuts down active sync 4.0 and reconnects in bootloader mode. You get a countrycode error.
the MDA is still in bootloader mode.
Now i restart the update and the install begins after the update you can reset your MDA pro. and it wil come with a IMATE splashscreen whereafter you can select your networksettings from your phonecompany.
then it wil install the new cabfiles from the rom.
That's how it went with my installation.
gpsenzo68
Isnt you mda pro a wwe rom already?
Re: Upgrade
gpsenzo68 said:
I'll try and explain again my way of installing:
I downloaded the update from Imate I unpacked the update and then I unpacked the executable with winrar. In the directory where the exe is unpacked I put the patchfile the I have uploaded for you (unpacked offcourse).
The I used that patchfile to start the update the first time it shuts down active sync 4.0 and reconnects in bootloader mode. You get a countrycode error.
the MDA is still in bootloader mode.
Now i restart the update and the install begins after the update you can reset your MDA pro. and it wil come with a IMATE splashscreen whereafter you can select your networksettings from your phonecompany.
then it wil install the new cabfiles from the rom.
That's how it went with my installation.
Click to expand...
Click to collapse
This worked for me as well. This first time I tried to run it I got a incorrect ROM version error message. Than I found out that I renamed MaUpgradeUt_noID.exe into MaUpgradeUt.exe instead of ROMUpgradeUt.exe. After renaming the file correctly gpsenzo68's explanation works just fine!
The first things I notice with the new imate ROM:
MSN (messenger works without having to buy the app (can sign in )!), Skype, Backgammon, more program memory, got rid off T-Mobile dialer skin, media player fullscreen stretch bug has not been fixed in this release.
MDA PRO ROM
MY ROM WAS THE ORIGINAL ROM FROM T-Mobile and now its a wwe rom
original german or english rom?
MDA Pro
NL Rom as you can see ;-)) So English
will your updated in this topic works
but it wont start after its done
its just says bootloader.
i really need the new updater to be hacked
it gets a string from the device.
someone able to hack this?
Related
I'm trying to upgrade my O2 XDA with original O2 Radio stack 4.21:
1. connect with PC via ActiveSync 3.8
2. launch Setup.exe
3. tranferring on XDA (WM2003)
4. on XDA starts Radio stack upgrade
BUT:
shows an error message like this
"Radio Stack upgrade fails. please click on OK to restart"
I click, XDA restart, bat shows errore message too.
I do an hard reset an then....
shows O2 boot screen with
G
R
4.01.16
and does not proceed anywhere!!!!
IS DEAD DEAD DEAD!!!!
how can i do to restart it?
Marco Molinari
ITALY
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
after ah hard reset and a long long long time, my XDA starts with no phone service (in boot screen shows:
G
R
4.01.16)
My XDA is PW10A-Model
I found RSU 4.21 (not found 4.16)
if i run PROGRAMME B
it shows FLASH FAILED! message and OK to restart.
if i click OK its restart, an so looping ...
you wrote:
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Click to expand...
Click to collapse
where can i found RSU 4.16?
where can i find RSUpgrade.exe ?
I must wait 10 minutes without click on OK, restart the device?
thanks
Take a look at:
http://lumpistefan.dyndns.org/tools/
HTH
Stefan
I just found a Cheinese Rom in the FTP, and using the "MaUpgradeUt_noID" it seems can detect my rom version, but i did not continue because i can not afford to "Fail", DID anyone know how to upgrade my english ROM to chinese???
HELP!!!!!!!!!!!!!!!
ericcc said:
I just found a Cheinese Rom in the FTP, and using the "MaUpgradeUt_noID" it seems can detect my rom version, but i did not continue because i can not afford to "Fail", DID anyone know how to upgrade my english ROM to chinese???
HELP!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
should be no problem for that , you can look at FTP again there had new ROM 11336_11334_10402 that's same as I had Dopod 900 , I already try to flush WEE i-mate ROM and flush back Dopod ROM twice no problem for flush ,
how can you upgrade it? need to enter serial mode? ( how to enter for universal) what tool did you use?
thx
ericcc said:
how can you upgrade it? need to enter serial mode? ( how to enter for universal) what tool did you use?
thx
Click to expand...
Click to collapse
See here maybe help http://wiki.xda-developers.com/index.php?pagename=Universal_Technical
I did the upgrade from Jasjar WWE to Dopod CHT. Here is how I did it:
1. Connect JJ to ActiveSync thru USB and wait till the sync session is completed.
2. While the sync is still active, I ran MaUpgradeUt_noID.exe. After a few steps of checking, it will disconnect ActiveSync and put the JJ into the bootloader mode.
3. The upgrade will halt with a country code error. No upgrade has been performed yet.
4. Run MaUpgradeUt_noID.exe again while the cable is still connected and JJ still in bootloader mode. I was prompted that I am upgrading from [Blank] to [NewVersionNumber]. Click "Next".
5. The ROM will be upgraded this time till it's done. It took about 20 minutes.
6. I pressed both softkeys and reset. When the reset prompt comes up, I pressed "0" to reset to default factory settings. After some booting time, JJ starts to speak Chinese.
I upgraded to Chinese ROM because the Chinese plug-in I used to use for English ROM is kind of buggy on WM5. Thanks to everyone on this forum.
There are a few things I did after I upgraded to CHT ROM:
1. Changed the system font to the more artistic Kai font (from KAIU.ttf on a Windows machine). The original system font was MingLiU, which looked kind of scrawny on a VGA screen.
2. Re-enabled ClearType for the system and PIE. For some reason, Dopod disabled ClearType settings so the user cannot turn on ClearType from the user interface. I used a registry editor and modified a few keys to get the ClearType feature back.
With the Kai font and ClearType, the screen becomes a lot more readable and very pretty! If someone is interested in step-by-step instructions, let me know, and I will post them.
By the way, I was so excited when I discovered the im.tv site actually works for me in USA. I was able to watch the TV news in Taiwan in full VGA screen.
One difference I noticed is that with the WWE ROM, I can very easily set up Bluetooth ActiveSync. With the CHT ROM, the device can only discover the serial port service on my computer, but not recognize its ActiveSync capability. If someone knows how to correct this, please let me know.
Also, in case you don't know, the keyboard mappings between WWE and CHT ROMs are slightly different. The SYM key is swapped with the ";" character, probably because SYM is hardly used in Chinese input. The shortcut "FN + ;" can toggle the English and Bomopofo modes. Note the ";" character is now on the SYM key of JASJAR.
yyl said:
There are a few things I did after I upgraded to CHT ROM:
1. Changed the system font to the more artistic Kai font (from KAIU.ttf on a Windows machine). The original system font was MingLiU, which looked kind of scrawny on a VGA screen.
Click to expand...
Click to collapse
Hi yyl :
Can you tell me how to change system front to Kai ?
Thanks
1. Copy KAIU.ttf from a Windows machine. Paste it into the Pocket PC's "Windows" directory thru ActiveSync.
2. Using a registry editor (like PHM RegEdit), BACK UP your registry first! Then go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink\". Change the data of "Courier New" and "Tahoma" keys to "\windows\KAIU.ttf,DFKai-SB".
3. Soft-reset your device. Now all the Chinese characters become Kai font. It is not very smooth, because ClearType is still disabled.
4. To enable ClearType, this is how I did it. Maybe some steps are not really necessary.
5. Using the same registry editor, search for the keyword "cleartype" in all the keys and values. I found three matches. I set ClearType=1, NoClearType=0, ClearTypeText=1 respectively.
6. Soft-reset your device. You will see that the system ClearType is still disabled. Go to "Settings -> System -> Screen -> ClearType" to enable ClearType. This option was originally hidden from end users. Now it's visible. Once you check the "Enable ClearType" box, the font will immediately smooth up.
That's it. One thing worthy of note is, KAIU.ttf seems to only have traditional Chinese characters, not simplied Chinese. I am not sure.
Thanks yyl , I will try it today
yyl said:
I did the upgrade from Jasjar WWE to Dopod CHT. Here is how I did it:
1. Connect JJ to ActiveSync thru USB and wait till the sync session is completed.
2. While the sync is still active, I ran MaUpgradeUt_noID.exe. After a few steps of checking, it will disconnect ActiveSync and put the JJ into the bootloader mode.
3. The upgrade will halt with a country code error. No upgrade has been performed yet.
4. Run MaUpgradeUt_noID.exe again while the cable is still connected and JJ still in bootloader mode. I was prompted that I am upgrading from [Blank] to [NewVersionNumber]. Click "Next".
5. The ROM will be upgraded this time till it's done. It took about 20 minutes.
6. I pressed both softkeys and reset. When the reset prompt comes up, I pressed "0" to reset to default factory settings. After some booting time, JJ starts to speak Chinese.
I upgraded to Chinese ROM because the Chinese plug-in I used to use for English ROM is kind of buggy on WM5. Thanks to everyone on this forum.
Click to expand...
Click to collapse
Can anyone give me more detailed information about how to use MaUpgradeUt_noID.exe? When I run it, I get an error message: "This application has failed to start because RUU.dll was not found. Re-installing the application may fix this problem", any help will be appreciated! I'm trying to update my Jasjar to CHT ROM.
yyl said:
I did the upgrade from Jasjar WWE to Dopod CHT. Here is how I did it:
1. Connect JJ to ActiveSync thru USB and wait till the sync session is completed.
2. While the sync is still active, I ran MaUpgradeUt_noID.exe. After a few steps of checking, it will disconnect ActiveSync and put the JJ into the bootloader mode.
3. The upgrade will halt with a country code error. No upgrade has been performed yet.
4. Run MaUpgradeUt_noID.exe again while the cable is still connected and JJ still in bootloader mode. I was prompted that I am upgrading from [Blank] to [NewVersionNumber]. Click "Next".
5. The ROM will be upgraded this time till it's done. It took about 20 minutes.
6. I pressed both softkeys and reset. When the reset prompt comes up, I pressed "0" to reset to default factory settings. After some booting time, JJ starts to speak Chinese.
I upgraded to Chinese ROM because the Chinese plug-in I used to use for English ROM is kind of buggy on WM5. Thanks to everyone on this forum.
Click to expand...
Click to collapse
Can you give me more detailed instruction about how to use MaUpgradeUt_noID.exe? Every time I run it, I get an error message as follows: "This application has failed to start because RUU.dll was not found. Re-installing the application may fix this problem."
yyl said:
I did the upgrade from Jasjar WWE to Dopod CHT. Here is how I did it:
1. Connect JJ to ActiveSync thru USB and wait till the sync session is completed.
2. While the sync is still active, I ran MaUpgradeUt_noID.exe. After a few steps of checking, it will disconnect ActiveSync and put the JJ into the bootloader mode.
3. The upgrade will halt with a country code error. No upgrade has been performed yet.
4. Run MaUpgradeUt_noID.exe again while the cable is still connected and JJ still in bootloader mode. I was prompted that I am upgrading from [Blank] to [NewVersionNumber]. Click "Next".
5. The ROM will be upgraded this time till it's done. It took about 20 minutes.
6. I pressed both softkeys and reset. When the reset prompt comes up, I pressed "0" to reset to default factory settings. After some booting time, JJ starts to speak Chinese.
I upgraded to Chinese ROM because the Chinese plug-in I used to use for English ROM is kind of buggy on WM5. Thanks to everyone on this forum.
Click to expand...
Click to collapse
Thanks! I am Upgrading my ROM now, May the God bless me!
Upgrade Success! thx everyone's help!
yyl :
Can you upload KAIU.ttf which I can't find in my window machine, Are you used Chiese window system ? mine was English + language pack
The KAIU.ttf comes with many versions of Microsoft Office of many languages. When the Asian character support is selected during installation, Office will install some extra Asian fonts for you. This is one of them.
Anyway, I uploaded this font to ftp://xdaupload:[email protected]/Universal
I don't know if this upload is appropriate. If it is not, the board moderators, please feel free to delete it. Thanks.
The principles that I outlined above should work with any TrueType Chinese font that you like.
johnney said:
Can you give me more detailed instruction about how to use MaUpgradeUt_noID.exe? Every time I run it, I get an error message as follows: "This application has failed to start because RUU.dll was not found. Re-installing the application may fix this problem."
Click to expand...
Click to collapse
Download "(Open_ch)UNI_DOPOD_11336_134_10402_Test.exe" from the "Universal" folder of this site (see the link in my previous post). Use Winzip to extract all the content from this EXE file into a folder on your hard drive. Place "MaUpgradeUt_noID.exe" into the same folder. Then perform the steps I mentioned above.
I have Modify the font to KAIU , But it does not suppurt Simpfy Chinese, it only support tradition chinese, does any font will fit Both?
I did it!
yyl said:
johnney said:
Can you give me more detailed instruction about how to use MaUpgradeUt_noID.exe? Every time I run it, I get an error message as follows: "This application has failed to start because RUU.dll was not found. Re-installing the application may fix this problem."
Click to expand...
Click to collapse
Download "(Open_ch)UNI_DOPOD_11336_134_10402_Test.exe" from the "Universal" folder of this site (see the link in my previous post). Use Winzip to extract all the content from this EXE file into a folder on your hard drive. Place "MaUpgradeUt_noID.exe" into the same folder. Then perform the steps I mentioned above.
Click to expand...
Click to collapse
Thanks for your help! Now I did it! My mistake was that I copyed the whole exe file to the folder!
Do you guys have Wisbar Advance 2 installed? How's it work? It really slowed my system down on my previouse english ROM.
Re: I did it!
johnney said:
Thanks for your help! Now I did it! My mistake was that I copyed the whole exe file to the folder!
Do you guys have Wisbar Advance 2 installed? How's it work? It really slowed my system down on my previouse english ROM.
Click to expand...
Click to collapse
I use Magic Button to "truly" close applications. It also shows battery meter and the icons of currently running apps.
ericcc said:
I have Modify the font to KAIU , But it does not suppurt Simpfy Chinese, it only support tradition chinese, does any font will fit Both?
Click to expand...
Click to collapse
Yes, as I mentioned in one of my previous posts, KAIU.ttf seems to include only traditional Chinese. The MingLiU font that came with the Dopod ROM has both traditional and simplified. I presume there are many third-party fonts on the market that support both. Note that fonts supporting both styles tend to occupy a lot more space.
hi guys
i have mda pro (PU10) from t-mobile germany need help. i wan't to update to english lang. please tell me wich file need to use. please tell me correct file name. my phone info
MDA Pro T-Mobile
ROM date 08/23/05
ROM 1.12.43GER
RADIO 1.00.02
ExtROM 1.12.127GER
please help me
thanks a lot
hi guys
please help me. now my phone dead only show usb v1.0 and nothing. i'm use this soft:
UNI_TMUK_12032_120_10600_Ship
i'm use reset button no result. please help me. wich file need to use
thanks a lot
hi guys
please help me. now my phone dead only show usb v1.0 and nothing. i'm use this soft:
UNI_TMUK_12032_120_10600_Ship
http://t-mobile.iris-global.com/download_manager_mda_pro.html
i'm use reset button no result. please help me. wich file need to use
thanks a lot
help meeeeeeeeeeeeeeeeeeeeeeeeeeeeee
The latest English ROM is Dopod 1.30.111 WWE(World Wide English) with latest Radio 1.11.00. The second is Qtek 1.30.77 WWE with Radio 1.09.00. They all can download at ftp.xda-developers.com/Universal with user name:xda and password:xda. But, read the detailed instructions before upgrading at http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Upgrading your device with different ROM wil show you Country ID error and use the program instead at http://forum.xda-developers.com/download.php?id=9885
hi man
thank you for reply mail. i'm find here: http://forum.xda-developers.com/viewtopic.php?t=42743&postdays=0&postorder=asc&start=175
http://forum.xda-developers.com/viewtopic.php?t=42743&postdays=0&postorder=asc&start=125
tell you result later
thanks a lot
hi guys
i have same problem. after update to UNI_QTEK_13077_176_10900_WWE_Ship
my phone not turn on. please help me
how resolve my problem thanks a lot
mrijnvis said:
i had the same with earlier updates. connect the device in a usb port not a hub, remove all cards, sim and memory
update ( maybe 2x because of language fault) then soft reset
in your case, maybe re update 1.09 then softreset
Click to expand...
Click to collapse
I had the same problem with a German T-mobile MDA PRO from Ebay and first think i did was to try and change the language.
First attempt went wrong and the phone would not turn on, but i flashed it again and all was OK.
I think the fault is the way you flash it. I discovered you must follow some important steps.
If the upgrade is a standalone file you must extract the firmware files in a directory like C:\flash (using winrar for example) where you can do the following:
1. Find MaUpgradeUt_noID.exe and later use it to flash, DO NOT USE ROMUpgradeUt.exe.
2. Edit RUU.conf and add [CHECKCEID_TYPE]=1 at the end.
3. Put the phone in bootloader mode (bootloader mode is where it shows usb on top and v1.0 at the bottom, so your phone is allready there)
4. connect usb cable (do not use a usb hub, plug directly on the computer).
5. Run MaUpgradeUt_noID.exe, and ----VERY IMPORTANT---- after the first screen when it displays the firmware version you are about to flash (it does not detect the version on the phone) WAIT 10 SECONDS. Then press continue, and wait for 20 minutes until it finishes.
Hope you make it...
HI MAN
I'M USE YOUR SOLUTION. BUT NO RESULT. ONLY SHOW BOOT MODE. SOFT CAN'T DETECT MY OLD SOFT VERSION. ONLY SHOW NEW SOFT VERSION. OTHER SOLUTION HAVE??? HELP ME
THANKS A LOT
Asxetos said:
I had the same problem with a German T-mobile MDA PRO from Ebay and first think i did was to try and change the language.
First attempt went wrong and the phone would not turn on, but i flashed it again and all was OK.
I think the fault is the way you flash it. I discovered you must follow some important steps.
If the upgrade is a standalone file you must extract the firmware files in a directory like C:\flash (using winrar for example) where you can do the following:
1. Find MaUpgradeUt_noID.exe and later use it to flash, DO NOT USE ROMUpgradeUt.exe.
2. Edit RUU.conf and add [CHECKCEID_TYPE]=1 at the end.
3. Put the phone in bootloader mode (bootloader mode is where it shows usb on top and v1.0 at the bottom, so your phone is allready there)
4. connect usb cable (do not use a usb hub, plug directly on the computer).
5. Run MaUpgradeUt_noID.exe, and ----VERY IMPORTANT---- after the first screen when it displays the firmware version you are about to flash (it does not detect the version on the phone) WAIT 10 SECONDS. Then press continue, and wait for 20 minutes until it finishes.
Hope you make it...
Click to expand...
Click to collapse
hi thanx man for the info but it didnt work for me now my phone is not coming out of bootloader mode....... what can i do now can u help me out of it. my HTC MDA T-Mobile PU10 has chinese wm6.1 installed in it. i want it to work in english. please help me out...............
Hello,
must be to reinstall the firmware.
Here is a link to the procedure:
Code:
http://forum.xda-developers.com/showthread.php?p=8674413#post8674413
I have a completely dead O2 Xda Zinc..probably caused by software...can someone tell me how to get to bootloader mode so I can try to update rom?..thanks
you need to have the abi files update for your O2 zinc that need only to load to your mini SD. and after power on it will automatic detect by your zinc
windelas said:
you need to have the abi files update for your O2 zinc that need only to load to your mini SD. and after power on it will automatic detect by your zinc
Click to expand...
Click to collapse
i have a similar problem with a dead O2 XDA Zinc...where do i get the abi file or can i make one from the wm6 upgrade file (Xda_Zinc_RM3070712_WWE_ExtV2.8.0.exe) that i download from the official website
the abi file can be found inside the exe but i dunno how can u extract it since if u use any extractor it will not give u the abi file ... also if u hv the raw rom & want to extract the rom also u will hv difficulty in extracting it
that is the problem that i am facing now
you can extract abi file from Xda_Zinc_RM3070712_WWE_ExtV2.8.0.exe by
1. connect o2 zinc with usb
2. flash your o2 zinc by exe file
3. when complete flash don't push finish button
4. select to view hidden files in folder that you put exe file
5. finally you will see marsii_g4.abi
goodluck & sorry my bad english
the .abi file in rapidshare
http://rapidshare.com/files/91371327/MarsII_G4.rar.html
unable to open registry key
hi kindly help me with my xd zinc problem w/ rom6. My unit suddenly crashed while in standby mode then i reset it then the setup was changed. the programs i installed suddenly became resident applications. Meaning ithey don't appear anymore in the storage memory unlike before that i can easily uninstall them. Now i dont know how to install them to install new softwares because the memory is low. then a message error "unable to open the registry key" appears everytime i reset.
What happened and what should i do?
ronald_di said:
hi kindly help me with my xd zinc problem w/ rom6. My unit suddenly crashed while in standby mode then i reset it then the setup was changed. the programs i installed suddenly became resident applications. Meaning ithey don't appear anymore in the storage memory unlike before that i can easily uninstall them. Now i dont know how to install them to install new softwares because the memory is low. then a message error "unable to open the registry key" appears everytime i reset.
What happened and what should i do?
Click to expand...
Click to collapse
reset meaning soft or hard reset?
hard reset or soft reset both does not do any good to remove the error message "unble to open the registry key" and to just reload the orginal applications and remove the others
ehmmm ... sad to say maybe u hv to flash the rom
how do i flash the rom?
download the official rom from seeo2 and then make sure ur dev is fully charged ... sync it wz ur pc using active sync then execute the rom (.exe file u hv downloaded)
good luck
Hi guys,
I've already upgraded to WM6 for my Zinc, but I'd like to have an original ROM in case I need to flash back when something's wrong. I checked seeo2 but I can't find it.
Pls tell me where I can find this original ROM (WWE) ???
Thanks
LeoDH said:
Hi guys,
I've already upgraded to WM6 for my Zinc, but I'd like to have an original ROM in case I need to flash back when something's wrong. I checked seeo2 but I can't find it.
Pls tell me where I can find this original ROM (WWE) ???
Thanks
Click to expand...
Click to collapse
original rom? WM5 ... u can get it at the site also
cruzzmz said:
original rom? WM5 ... u can get it at the site also
Click to expand...
Click to collapse
You mean the WM5 ROM on seeo2? It's still an upgrade ROM, not the original that comes along with the device at the beginning.
Anyway, I'm a newbie so please advice how to 'downgrade' from WM6 to WM5? Is this similar to the process upgrading from WM5 to WM6 (you just sync the device with PC, run the .exe file on the PC and let it go)?
If it's not, please kindly give me detail instruction
Many thanks
Hello,
if got the T-Mobile MDA III with WM6.0.
Now i want to update my ROM with WM 6.5, bit i only become the following error:
Your image has corrupted. please check your update utility.
Can anyone help me???
i hope you can help me.
thx
markus
try to re-download the rom and make sure you run a USPL first if it's your first upgrade. Search the forum if you need help
it dosn´t works
i´ve tried 5 different roms but no one works.
its the second upgrade on the fon.
Try a new update of SPL, files here= http://forum.xda-developers.com/showthread.php?t=311403
Download "ArtemisUSPL.zip"
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run start_uspl.exe on your computer and wait until process finishes
4. The phone reboot.
When boot is done, you are CID unlock forever normally so you can flash all rom you want.
Then, You can flash now your rom, just run RUU from your rom folder and normally it's good.
If it always don't work, give us all the number show in your 1st screen when the phone boot (IPL, SPL ...)
yes, tell us what numbers you get on your screen
also what error are you getting
and what OS are you on....vista? XP ? Did you get an activesync connection before you tried flashing?
also try putting phone into bootloader mode first and then flashing, sometimes helps. (hold down RECORD/NOTES button when you reset)
once you've got an error number ( eg error 260 ) you can try searching the forum for that error number and see how everyone else has coped with it.