Related
I upgraded my Orange SPV M3100 with Dutty's Windows Mobile 6 Premium v2
http://forum.xda-developers.com/showthread.php?t=303665
I followed the exact instructions as per the following guide
http://www.mrvanx.org/hermes_guide/dutty
Everything went fine and the phone seems to be having no issues apart from the following issue of receiving calls.
My Network - Virgin
ROM Version : WM6.Premium.v2
ROM Date : 17 April 2007
Radio Version : 1.41.00.10
Protocol Version 32.74.7020.18H
If I call it from the landline it sounds as though its ringing but actually does not respond. The phone won't rings. The calling person is getting 'The is a fault' or 'Please check the number you have dialed'.
Even I tried to reset as many times.
I even switched the network to using GSM ONLY. But still happening...
But I can make calls with no problem.
Please help
i had the same problem also and im using tmobile(US), but i just used a different rom.
Any other software running on the phone? If so, try uninstalling.
santhoshkumar said:
I upgraded my Orange SPV M3100 with Dutty's Windows Mobile 6 Premium v2
If I call it from the landline it sounds as though its ringing but actually does not respond. The phone won't rings.
Click to expand...
Click to collapse
Hi
1.Try reflashing it. Some times works after reflashing or
2.Try with another Radio Rom
todd_jg said:
Any other software running on the phone? If so, try uninstalling.
Click to expand...
Click to collapse
I am running the following softwares only
1. TomTom Navigator
2. spbBackup
3. spbWeather
Apart from that none..
I even reflashed the Radio Rom..Still havinng problems..
Found an interesting reading here
http://www.modaco.com/index.php?showtopic=250460
suggesting that it might be the 3G of TMobile UK, but I belive I haven't had the issue for the past 4 monhts having my M3100 with original Orange WM5 ROM.
Thinking of going back to the latest WM5 rom from Orange
Then try as the wise Abo Forat suggested and reflash the ROM - I would re-download it too. (Or try a different one.)
santhoshkumar said:
Thinking of going back to the latest WM5 rom from Orange
Click to expand...
Click to collapse
But plz be careful and read mrvanx downgrade guide otherwise u brick your phone. Still u can try reflashing
Good luck
Since I installed WM6 I can´t recieve incoming calls. The phone lights up but nothing more, and when I click on the reception or phone symbol when it lights up it says "no service" (translated from Swedish).
It was also some problems with Active Sync 4.5 since I upgraded, but those problems might just be because I needed to reinstall it.
Does anybody please know how to fix this, otherwise tomorrow it will go to the repair-shop and I will lose 12 days and the order in my life. : (
The sim-card works on another phone and it worked with WM5, and I have tried hard reset and a reinstall of WM6, but the problem persists.
/Danne
Hi,
Did you try to install an offoicial version of WM6 or one of the cooked ones of this board? If the latter did you take all the necessary precautions first eg installing an upgraded bootloader, etc?
If you have not you may have bricked your phone.
Give us a bit more detail so we can see how we can help.
Cheers
WB
hello
I had the same problem when I upgrade to official WM6 HTC rom, the phone don't ring and I loose the network.
I solve the problem with flashing the radio rom with older version.
I put wm6 on my phone the first day I got it. so I don't really know if this was a problem b4 with wm5.
mine only seems to ring my end after about 8 rings from the dialer so I have to get it within 2 rings b4 voice mail kicks in. Ypu think the if I update the radio as well will that help me?
ps. sorry for hi-jacking your topic seemed along the same line.
the same problem with Bouygues telecom!
Hi guys,
vinzcoyote can you tell me which radio version you put? i'm having the same problem with Bouygues telecom after updrading to WM6
thanks for the help.
C. J.
are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.
CrunchyGremlin said:
are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.
Click to expand...
Click to collapse
Sorry but i'm new to this: whats the "cnguar provisioning cab "?
thanks
CJ
Hi everybody,
Sorry it took a while to answer (sleeping time).
I installed the official version from HTC Europe and it it only the incoming calls that doesn´t work, I can call other people.
THE SOLUTIONS
Two solutions seems to have been offered (below) but I (as Curious Jack) are new to this so could you please elaborate of give a link where I can read more?
Vinzcoyote "I solve the problem with flashing the radio rom with older version"
CrunchyGremlin: cnguar provisioning cab
Thanks so far.
//D
Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps
luckydip said:
Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps
Click to expand...
Click to collapse
Thanks!
Two concrete solutions.
One last question: I use a Swedish OS - do the radio roms that is under: "Extracted Radio ROMs for your Hermes" work for me? Or only Anglosaxian PDA:s?
/Dan
similar problem discussed here:
http://forum.xda-developers.com/showthread.php?p=1442269#post1442269
in fact Palm Treo 750 (HTC Cheetah) and Hermes are based on the same radio module.
latest Palm Treo WM6 Radio version: 1.47 (Qualcom)
What that Palm utility does is simply downgrading radio to earlier version. This might work for Hermes in bootloader mode as well.
My point is: no need to install hard sspl if one can downgrade to earlier version of radio with _official_ radio downgrade tool.
I will try later and report back.
update: Palm Radio downgrade tool picked up that device is incompatible. no luck so far.
Seems problem is with Bouygues Telecom
Hi Guys,
Got the exact same problem with Bouygues Telecom. I put a Orange Sim card and it is working so I assume the issue comes from Bouygues Telecom.
So that to check, are the french guys all on Bouygues Telecom or are you using other Telco operators?
Frederic
SOLVED : WM6 & HTC Tytn & Bouygues Telecom now working
Guys,
to make it work, you need to flash ROM Radio 1.38 on top of Windows Mobile 6.
ROM Radio 1.38 can be finded at http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
what version did you use? There are few of them listed on that page:
1.38.00.01
1.38.00.10
1.38.30.10
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
the same
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
kosiara said:
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
Click to expand...
Click to collapse
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Same problem here
Zecanilis said:
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Click to expand...
Click to collapse
Hi Zecanilis,
I encounter the same problem that is described here by user kosiara an Novy
The GSM signal is excellent, but the phone does not work from time to time and when I try to make a call, I get the message "the operation failed". of course nobody can reach me neither... When I do a soft reset everything is back to normal...
This is very anoying and I do not know what to do.
I bought this PDA second hand, with the upgrades already done for me. Since I do not have any personal data or programs on it yet, I wouldn't mind doing a hard reset and installing everything from scratch.
What would you suggest as a stable system OS and ROM versions?
Any help would be much appreciated.
Here are my actual data:
XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.13.0.0
ROM version : Artemis Touch 4.02 WWE
ROM date 4/08/08
Protocol version 4.1.13.52
Model Nr : ARTE 200
WM 6.1 Professional
CE OS 5.2.19199 (Build 19199.1.0.0)
Regards
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Zbootsom said:
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Click to expand...
Click to collapse
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Zecanilis said:
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Click to expand...
Click to collapse
Hi, and thanks for your reply.
I am new to this and althought I read many post, I am not sure.
Can I just upgrade the OS Build without flashing a new ROM.?
If Yes, How do I do it...any tutorial?
Thanks
No.
You have to flash a complete new ROM.
Cheers
OK Thanks
Whish me good luck,,,
Good luck and good choose...
!Novy said:
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
Click to expand...
Click to collapse
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
novy said:
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
Click to expand...
Click to collapse
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
neilhhardy said:
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
Click to expand...
Click to collapse
Thanks for your answer. Yes, I flashed it twice and I even flashed a factory rom before that. All Artemis Touch roms were fine until 4.01 and 4.02.
So Zecanilis is probably right blaming the OS version for that malfunctions.
New Rom
I have flashed my device using USPL (took me 2 days to setup the program to work with vista drivers). Then I flashed the same ROM I had before (Artemis Touch 4.02 full Red and Black) but with a different OS build. (as Zicanillis advised)
I will use it for a while and let you know if the freezing phone problem has been corrected.
Cheers
One other change that is on my build is page pool.
My page pool is 6 MB, and some Touch and vanilla (included the 4.02 i had) is only 4MB.
In my opinion that could be another issue to test.
My PDA is working just fine now.
Cheers
For me the problem was the OS Build.
I flashed my device with the same 4.02 vanilla but with a different OS buid and the Phoneworks great. Been using for 2 weeks now, never freezes or looses signal.
Cool
Thanks to Zecanillis advice! obrigado !
I have an HTC S620 (Original HTC)
Running WM6.1 (http://forum.xda-developers.com/showthread.php?t=374890)
but...theres an Problem:
Wifi Works Fine,No Problems
But i became no Gsm Signal,it Takes my Pin and Displays "Sim card pro" (is Normal,its an A1 Austra card-it displays this on every Phone)
but then stands on the Display "Searching" ive waited 2hours and tested 3 Sim Cards and 4 Roms,Nothing Helps
i also Flashed from HERE
The "HTC WM6 WWE ROM - 4.1.13.44_02.94.90" and also "Rogers WM6 Radio - 4,1,13,47_02.98.90",doesnt Help
any Suggestions?
Sry for My Bad english :'(
Have you also tried the Radio-Rom "T-Mobile WM6 Radio - 4.1.13.34_02.79.90 " from http://forum.xda-developers.com/showthread.php?t=332195 ?
Re-Flash Kavana or Ricky's 6.1 ROM - It's stickied. Choose either one of them.
Set it up. Pop in your SIM Card and Try again.
Check if your phone is off just incase (in the settings).
If you've done everything and you still can't get the gsm signal and it keeps searching, then either you have a problem where you live or your phones defective. Did you try going outside? Maybe you have a weak signal where you live? Let us know.
Good Luck!
ok,Have Reflashed.-No help
The Phone is Activated
Outside also No Signal
The Signal here is Good,with my Other S620 (MDA Mail without wifi)
i have no Problems
Ahh, That Sucks then all I can think of that there's something wrong with your phone i.e. it's defective. Get it replaced !
Good Luck.
Just wondering does the original rom work that came with your phone. Also what is your provider.
the Original Rom was:
HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship
This Worked Fine
The HTC is an US Device (QWERTY),i Use it here in Europe (Austria) with an Mobilkom Austria-A1 Sim Card
I Reflashed it Now,but no Help
Willmaster said:
the Original Rom was:
HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship
This Worked Fine
The HTC is an US Device (QWERTY),i Use it here in Europe (Austria) with an Mobilkom Austria-A1 Sim Card
I Reflashed it Now,but no Help
Click to expand...
Click to collapse
Ummm you might need to configure the settings on that phone because you said the original rom worked however the new one didn't. Here try this on the new rom that you have installed (assuming its the 6.1 by Ricky if not download it from below in my signature). After you installed it or have it installed then go to accessories and connection setup and that should get you rolling.
HI
i have kaiser 130
I tried few diffrent android version but with evry version phone cant connect to network sometimes he connects for few minutes but not longer. With windows everything ok
I tried:
Incubus26Jc's Super Eclair Lite 2.1
Warm Donut RLS 5 with Kaiser updates integrated including battery
Im using
HardSpl 3.34
radio 1.70.19.09 (tried 1.70.18.02)
Protocol 25.83.40.02h
Maybe someone had same problem and can help me?
Sorry for my english.
i just checked i was editing nbh for Warm Donut RLS 5 with Kaiser updates integrated including battery
and i was using esclair not donut. (dum) Maybe in this is problem....
I has the same problem too ,waiting somebody give a method to solve this
Have you tried an older radio, such as 1.65.21.18?
No because in guide:"How to replace Windows Mobile with Android (Guide)" (sorry i cant paste link because im new user) is recommended 1.70.x and better here it is "#2 Does your Kaiser have a relatively new radio rom? If not then get one. Recommended to have 1.70.xx.xx and up. "
if it is radio fault so why on winMO with same radio working?
And one more thing kaiser with android finds not 02 but BTCellnet (in the beginning O2 was BTCellnet )
The same radio suggestion was made to me several days ago while trying to get audio working in android (via HaRET). Upping to 1.70.xx didn't fix my issues, but 1.65.xx did.
If you are able to test it in WM, you must still have WM installed. Are you booting android with HaRET?
No i think HAret if you installing to sdcard but im installing not in sdcard.
im doing all by this guide go here to read.
xda-developers > HTC Kaiser: Tilt, TyTN II, MDA Vario III > Tilt, TyTN II, MDA Vario III Android Development
> How to replace Windows Mobile with Android (Guide)
Yes, I know the sticky thread to which you have now twice referred. I am asking how you know wifi works in WM if you have replaced WM with android as the guide leads you to do.
There is no danger it trying an older radio regardless of what the guide suggests. I would respectfully suggest that you give 1.65.xx a shot, despite what the guide says. If the older one works, then you have solved your problem. If it doesn't work, you can flash 1.70.xx back on and try something else.
I am running Incubus's Super Eclair on my device and wifi works flawlessly. I am also able to do BT connections and hear audio. None of these worked when I tried 1.70.xx, so I use 1.65.21.18 instead.
em not wifi iwth wifi every thing ok but mobile newtwork dosent work
Roger that. My recommendation still stands, however.
Trying the alternate radio will take you less than 5 min total including d/l time. You can find it linked in post #3 of this thread: forum.xda-developers.com/showthread.php?t=393182.
You could also try 1.71.09.01, which I see was posted several days ago.
thx m8 its working! just signal strength is bad but still....it works! one more time thank you m8!
m8?
What was your solution?
i have a similar problem. Cannot connect to the internet with 2g/3g, but wifi works. The latest rom did not solve my problem. Maybe i'll try older ones...
hi @all,
any news here?
I got the same problem.
At the moment I have running the version milanche has upped, because I thought it is running for him, so maybe it does also for me. but it doesn't.
forum.xda-developers.com/showpost.php?p=6570064&postcount=7
(sorry, as a new user I can't make a link out of this)
Everything seems to be fine except mobile internet.
Edit:
Maybe I should inform you that I already have edited my APN-Settings. And I really think they should be ok. On WM6.1 these settings are working.
And I like to mention that I'm booting from SD.
Kernel may be ?...
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
I have a problem with an i-mate K-JAM ... Some time ago I got this ppc but I went I installed a program and got stuck. Windows and the currency we now find no signal at all looking and looking and still not know what does. please help me
orcatrainer said:
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
Click to expand...
Click to collapse
same issue.APN data not working
Incubus26Jc's Super FroYo RLS15
radio 1.65.16.25
kaisimg-panel2-240x320-2.6.32-tilt-froyo-09-09-10_21.nbh
possible solution
I,m started MODEM application,tapped Connect-and looks like APN now working!
Let's see how long it works for you. I have the same setup as orcatrainer but mine works off and on some times. I must add, I have Simple Mobile. They are on the T-mobile network therefore, I cannot access 3G on my tilt. Playing with the 2G setting usually cause my phone to connect to APN until I turn the phone off. Then I have to struggle to get it to work again. I just put my sims back into my Blackjack 2 to access mobile data until this issue is fixed.
illegal2008 said:
I,m started MODEM application,tapped Connect-and looks like APN now working!
Click to expand...
Click to collapse
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
orcatrainer said:
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
Click to expand...
Click to collapse
in applications section-not in settings