i guys i don't know if u had the same problem but in my phone some times it appears one small black box in top left at home screen and others screen and i can`t close it i tried to use Kaspersky antivirus but i doesn`t work some times it block my phone that i should do the hard reset there is any way to remove it or any antivirus that can stop it??
see the screenshots and please help me because i`m tired of re flashing
Try a hard reset
i tried but some times it comes again
Maybe one of the programs you're installing?
Try another Rom
no, not virus. the touch flo 3d problem. try other rom
ok thank you guys I will try other rom, I need u guys to advice me which is a best and stable rom with manila 2.5 that don'T consume too much ram, thanks again
another rom,mtty plus hard reset is the key
Related
it stuck's at the windows mobile scrren anda don't know what to do help me please
why anyone can help me
i dont uinderstand why my posts don't have anwser
Is this a joke?
Hmmmm....
Don't take it as an offend, but you are at the wrong forum.
I believe you have to ask the question on the right one.
This forum is for QTEK 9000.
Please feel free to look and search before you post.
If you look here it seems that the early QTEK Uni was branded as the 4040 so please dont be so quick to flame...
Anyway onto the problem. Try a hard reset and clear by pressing 0 when asked. if that fails then reflash the rom in the usual way. That should cure the problem.
Psi
sorry man i had a very bad day realy sorry how do i hard reset my qtek
No need to apologise. I have had a hell of a day myself mate.
Extract below is taken from the Universal Wiki - Perhaps you may find all of it an interesting read in
To do a hard reset (push the two menu buttons ("-") on the keyboard + the reset button at the same time (all of this three). Doing a hard reset will result in you losing all your installed apps and data so ensure you have a backup of everything first.) Everything should be fine from this time. You have to calibrate the screen and do some setting up...
Click to expand...
Click to collapse
Psi
Hello, i'm sorry to get this thread back up, but i'm having a problem that looks much like this.
I can power the device on, but it powers off sometimes at QTEK screen, sometimes at Windows mobile screen, and sometimes i can do the whole setup thing, and when it begins at installing extended, it powers off again! :s
I can get in bootloader, so i don't know if it's bricked or not,
The device is a QTEK 9000
Radio 1.15
the Windows Mobile 6 version of Jmwright or something like that (Latest version)
Can anyone post me a quick walktrough of what i have to do to get my device back up and running... If you suggest another ROM from another developer which doesn't have that camera buffer problem etc, because i really want to start using this device in a safe way.
Thx in advance, i really appreciate all the work done here.. Just want my problem fixed asap
Greetz,
Vergracht Nikki
Hey Guys...
Heres a new one for ya!
So.. Hard SPL installed, success "upgrading" to Elite 1.0
Now.. when i try to "reinstall" a standard Stock rom (tried both Asia & UK) it goes through the procedures with no real probs... then stops after entering Bootloader.. at 0% and stays there!
Any Ideas??
BTW After resetting / battery remove etc, the old rom is still there, no hard reset or any of that mallarky!
I even tried taking out the sim, just to be on the safe side!
I know that "before" with my UNI, it did this sometimes when I had a SD card in it! But the internal storage is built in now... so???
Juggles said:
Hey Guys...
Heres a new one for ya!
So.. Hard SPL installed, success "upgrading" to Elite 1.0
Now.. when i try to "reinstall" a standard Stock rom (tried both Asia & UK) it goes through the procedures with no real probs... then stops after entering Bootloader.. at 0% and stays there!
Any Ideas??
BTW After resetting / battery remove etc, the old rom is still there, no hard reset or any of that mallarky!
I even tried taking out the sim, just to be on the safe side!
I know that "before" with my UNI, it did this sometimes when I had a SD card in it! But the internal storage is built in now... so???
Click to expand...
Click to collapse
only signed ROMS can be upgraded with the Hard SPL for unsigned ROMs u need the latest Olipros hard spl to be installed. for now only two roms are there that u can upgrade with a signed hard spl. if u want other ROMS to upgrade use this SPL version of olipros but i may remind u that its not for newbies !!!
http://forum.xda-developers.com/showthread.php?t=400950
DOH!
Of course...
I didnt even think about that!
Cheers Mate..
Actually I sort of got things sorted.. Re-Flashed Elite.. Giving it a second chance!
Will test though and let you know. Thanks for the tip!
So I'm having problems installing Hard SPL (Olinex Unsigned). The phone is connected w/ Active-sync to my computer, and all of those required "steps" to check before you begin flashing were there. It takes just a few seconds for the HardSPL to install, and it says "congratulations...", so I assumed it went well. However, when it boots up, it says NOTHING about Olinex. Instead, when I'm on the boot screen, it has red letters, the lower ones stating my normal ROM build. It looks like:
R 1.00.25.5
G 1.52.29.25.12H
D 1.93 ...
I assume this is the bootloader? I held the lower volume button and hit the soft reset button to get to the bootloader, and that was the same screen it went to. However, then the ROM boots up on the phone, and it's the same intro screen as my initial ROM was. When I proceed with trying to install the HardSPL again, it tells me my current ROM is 1.93.401.2.. not Olinex.' I also tried the SSPLmanual file. No good..
Also, I realized that when I ask for it to update, Mobile Device Center loses connection w/ my phone. Maybe I am just having a problem holding a connection between the two? Activesync is turned on on my phone, and Mobile Device Center says that my phone is connected before the flash.
Has anyone had this problem before, or know how I can fix it? Thanks everyone. I've been looking around everywhere.
TAhsifter88 said:
So I'm having problems installing Hard SPL (Olinex Unsigned). The phone is connected w/ Active-sync to my computer, and all of those required "steps" to check before you begin flashing were there. It takes just a few seconds for the HardSPL to install, and it says "congratulations...", so I assumed it went well. However, when it boots up, it says NOTHING about Olinex. Instead, when I'm on the boot screen, it has red letters, the lower ones stating my normal ROM build. It looks like:
R 1.00.25.5
G 1.52.29.25.12H
D 1.93 ...
I assume this is the bootloader? I held the lower volume button and hit the soft reset button to get to the bootloader, and that was the same screen it went to. However, then the ROM boots up on the phone, and it's the same intro screen as my initial ROM was. When I proceed with trying to install the HardSPL again, it tells me my current ROM is 1.93.401.2.. not Olinex.' I also tried the SSPLmanual file. No good..
Also, I realized that when I ask for it to update, Mobile Device Center loses connection w/ my phone. Maybe I am just having a problem holding a connection between the two? Activesync is turned on on my phone, and Mobile Device Center says that my phone is connected before the flash.
Has anyone had this problem before, or know how I can fix it? Thanks everyone. I've been looking around everywhere.
Click to expand...
Click to collapse
I'm under the impression that you are not entering your bootloader screen. Please try this again (soft reset and ASAP, press the vol down button). Keep holding it until you see Red, Green, etc.(rainbow like coloured screen) .... please report back what it says on that screen before we move on.
wow.. I suppose that did the trick. AND it DOES say that it has Olinex on it, so I guess that installed w/o a problem! Thank, I really appreciate the help. Unfortunately, I've heard many different ways to get there (mainly hold vol-down THEN press soft-reset).
One last question though.. Now that I spent a good 30 minutes installing the list of those tweaks, would I really see much of an improvement jumping to a cooked ROM? I was looking at getting AZTOR or Nataly's lite (I'm not asking which one..), but I am not sure how much of an improvement I'm looking at. I'm currently running the stock ROM as 1.93 (I guess I'm running Olinex atm). Now that I've applied all of those tweaks from that one page, is it worth it to jump to a cooked ROM?
Thanks again! That makes my day seem MUCH more successful now.
TAhsifter88 said:
wow.. I suppose that did the trick. AND it DOES say that it has Olinex on it, so I guess that installed w/o a problem! Thank, I really appreciate the help. Unfortunately, I've heard many different ways to get there (mainly hold vol-down THEN press soft-reset).
One last question though.. Now that I spent a good 30 minutes installing the list of those tweaks, would I really see much of an improvement jumping to a cooked ROM? I was looking at getting AZTOR or Nataly's lite (I'm not asking which one..), but I am not sure how much of an improvement I'm looking at. I'm currently running the stock ROM as 1.93 (I guess I'm running Olinex atm). Now that I've applied all of those tweaks from that one page, is it worth it to jump to a cooked ROM?
Thanks again! That makes my day seem MUCH more successful now.
Click to expand...
Click to collapse
Hi I would not to back to a stock 1.93 rom even the stock 2.03 rom is a lot better in my option.
cobbs said:
Hi I would not to back to a stock 1.93 rom even the stock 2.03 rom is a lot better in my option.
Click to expand...
Click to collapse
haha, so you recommend I go ahead and push my luck w/ a 2.03 cooked ROM? Will I really have to worry about all of those tweaks, or will they already be optimized in the cooked roms? Again, I'm looking at 2 that are based off of performance, so I can expect they'll already be well-tweaked, but I'm new w/ all of this.
TAhsifter88 said:
haha, so you recommend I go ahead and push my luck w/ a 2.03 cooked ROM? Will I really have to worry about all of those tweaks, or will they already be optimized in the cooked roms? Again, I'm looking at 2 that are based off of performance, so I can expect they'll already be well-tweaked, but I'm new w/ all of this.
Click to expand...
Click to collapse
Hi I would but thats me. yes these roms are tweaked for performance.
make sure you have read this http://forum.xda-developers.com/showthread.php?t=416211
warning once you start to flash some roms it is hard to stop.
Hi have a look here to flash from the internal storage.
http://forum.xda-developers.com/showpost.php?p=3287426&postcount=10
Lately I keep like 4 cooked roms in folder on my internal storage and when I feel the need to try a new rom I just copy it to root, change name and install OS from bootloader (volDown, backButton, resetButton).
That is my identical process. Sometimes they never make it to the flashing stage but always a couple on standby...lol
HI im having some very big problems with my tilt2. I can teather it fine but for some reason after a day or two i get the remote party has ended the connection, and no matter what i do to it, weather it be uninstall the script and speed patch and reinstall it, it wont help. so i have to format the phone and load it all over again and it works fine for about 2 days tops. Anyone have any ideas why this is happening? I seem to be formatting this phone every 2 days just to get it to teather.
i had the same thing happen to my kaiser with the stock att rom what i did was flash the rom and radio. after that problem was gone never happened again. you can also try this http://forum.xda-developers.com/showthread.php?t=538874
i don't know if this is of any help to you. After you get the error message can you still connect with active sync?
nope
after the errormessage i cant connect on the internet at all, i have to formatt the phone and reload everything to get it to work again
Rom and radio
What rom and radio do you reccomend for the tilt2 thats stable
i remember getting that error on my blackjack, it was mostly because i let it idle and data disconnects when not in use. its not like its a stable connection. if you wanted that you buy the crappy little usb card.
tomfubarr said:
What rom and radio do you reccomend for the tilt2 thats stable
Click to expand...
Click to collapse
the rom i'm using right now is here http://forum.xda-developers.com/showthread.php?t=617142
and Radio 4.49.25.91 i found the link on the same page.
if you're new to flashing i suggest you go here first http://forum.xda-developers.com/showthread.php?t=550540 it helped me out alot
Possible solution
The above mentioned "idle" problem is more than likely your culprit. I had a similar problem as well with the stock ROM. I suggest using NRG's Leo ROM to fix this problem. There are other solutions, but they are pretty tech savvy ones. Plus, if you haven't flashed your ROM yet, dude, you don't know what you're missing. The whole reason we're here is to push our phone's to the limit as far as functionality is concerned. Stock ROM's don't even cut it. Give a new one a whirl, I promise you won't be disappointed, plus, your reformatting issue will be gone as well, just a heads up from someone who's been around, you know?
Stuck
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out
tomfubarr said:
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out
Click to expand...
Click to collapse
Is your phone "unlocked?"
tomfubarr said:
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out
Click to expand...
Click to collapse
For the Tilt2 you'll want to use the enablerapinew.cab file in the Hard SPL thread.
Hello members,
My diamond screen is often showing black and white screen. It is simply hanging. Each time I had to remove the battery and restart it again.
I am using MIN.74 ROM.
Please let me know what is wrong and suggest me a solution.
Please find the enclosed copy.
Thank you in advance.
Best Regards,
So
sonyuk143 said:
Hello members,
My diamond screen is often showing black and white screen. It is simply hanging. Each time I had to remove the battery and restart it again.
I am using MIN.74 ROM.
Please let me know what is wrong and suggest me a solution.
Please find the enclosed copy.
Thank you in advance.
Best Regards,
So
Click to expand...
Click to collapse
did you formated the device before flashing ? task29 .. mtty ?
this i had few times after much flashing. but few times meaning 2-3 after MAAAANY flashing .. but if it is often .. probably some leftovers from previous rom ?
it is not a screen problem!
cheers
Even i have this now for the past 2-3 weeks, i thought my diamond was dying
Lets see what happens im gonna backup my phone and try formating it today.
It also happens to me sometimes... But I don't restart the phone... I wait some minutes that the device go into sleep mode and after that the screen is normal again.
It happens very rarely and I don't know what's the cause...
I always flash the device using mtty.
Bye
Marshall
yes it started also on mine, today i had to reboot it twice because of this problem.
I'm using last memo rom with sense 2016.
i never had that problem until now, and i flashed like hundred times almost every rom here, always with mtty.
i have faced that problem too! it's not a big deal for my phone. try to flash other ROM to your Device.i'm using Memo too! and i love it.
maybe it's because a bad ROM flash. try to flash it with other ROM and flash again with your current ROM and try to flasy using mmty.
I have a same issue and I thought that my device is gonna die
I'm using Rottgrub's rom and I alwasy do mtty before flashing rom
I am having the same problem, since the past few weeks. I have flashed the device say 100 times. I've tried different ROMs and the problem recurrs. I do a soft rest and everything returns to normal.
One observation is that when I do task 29. I get I get atleast 5 'ERASE block xxx FAIL' messages. I hope someone can help in this regard.
When I using GenY 2.6 with Sense, I also got this problem. But I change to 6.5 with titanium, the problem gone. I think the reason is sense, or maybe run too much 3D with Sense.
And of course, I don't think It's a hardware issue.
@sobny:
Yeah- it only happens when I use Sense Rom
as far as i heard, is just "overflashing" .. and NOT known solution for "snow like screen" ..
and it is NOT sense related, as few times i turned OFF sense, and used SPB mobile shell ..
FyreMasq said:
One observation is that when I do task 29. I get I get atleast 5 'ERASE block xxx FAIL' messages. I hope someone can help in this regard.
Click to expand...
Click to collapse
basicly that is flash error, i mean .. blocks in phone, like bad sectors on hard drive, but in the great mtty guide .. it says
ERASE block xxx FAIL !!!
ERASE block xxx FAIL !!!"
(where x is a random number)
This has been asked 100+ times in this thread so this is the final time I will answer:
IT MEANS NOTHING..NADA..ZIP! I have not experienced ANY problem with this output...Please stop asking!
Click to expand...
Click to collapse