hi there
when i get i new sms the the notice sound didn't work.i get sms with no sound at all even when i define it in setting.i flashed xanny 1.9 rom.it's the same problem on the earlier roms
thank you
+1 ... I have the ame problem :s
Have you installed a new dialer or taskbar? these can play havoc with the sound files. If so, try uninstalling to see if this resolves the problem.
No new taskbar and no new dialer ... juste few programs :
Max Manilla v2.82, G-Alarm, Spb BackUp, Tomtom and CorePlayer
I usually have the same problem after installing an additional Language interface in a new ROM.
My solution (95%) is to install "SmileySMS "
http://www.1800pocketpc.com/2008/07/22/smileysms-v166-add-smileys-in-sms-for-windows-mobile.html
Don't forget to make it the default SMS tune and then do a SR
Good Luck & enjoy!
Hello,
thanks for the information. I tried to install it. It seems to work fine for the sound, but there is an enormous vibration... So I tried to configure SMSSmiley. I installed the 1.66, 1.68 and each time, I had a problem, I can't save the configuration under WinMo 6.5.3, there is no way to validate.
I edit a key in the registry for suppress vibration
HKEY_CURRENT_USER\Software\Roozbeh GHolizadeh Softwares\SmileySMS:Vibrate
value set to 0
It's OK now ... thanks a lot
I got the same problem, driving the blackdragon 1.9, weird. And yes of course I have checked the boxes in sound and notifications.
Edit: So I've read that the issue appears when one uses the manilla language manager (which I did), however no fix has been reported yet.
The method describe there is working on my HD ... and I confirm that I used MLM ...
Related
I tried to figure out what happens with audio manager 2.0 when you turn the device in suspend mode and the music stop playing, but i have no answers, i tried in mostly all new cooked rooms available in this forum so i think that is a problem with manila2d... any one can help me?
maybe changing the registry setting HKLM-Software-HTC-Audiomanager-Config dword: enter_suspend value: 1 ; change to: 0 can solve this?
i tried that and no results! :_(
hm, ok... i could not try before, cause i'm on work now and can not run my musicplayer
Any body figure out how to stop this happening?
I assume all these different manialla roms are based from the same core Rom and maybe the problem is their?
I also noticed, that third party players like Core Player also get terminated when you push the power button, seems a common problem and one that I'd like to fix, as leaving the phone on while playing music seems a tad excesive.
well first.. the new YuE v11.3 3.15.20755 rom with manila is solved this problem..(not the previous V11.1)
and this is the rom
http://forum.xda-developers.com/showthread.php?t=434516
and who don't want to flash a new rom.
i used an application or tweaker called pocket toolman
http://pockettoolman.blogspot.com/
just go to settings and then enable the screen toggle and then assign a hard bottom to it soo al players will work.
hint. this tool opens in the try .. so if you want to use it with manila open it twice from the programs.
cheers
Admin edit: removed spam quote
stop spamming, you...
hello frnd. i have faced a few problems cooking wm6.5 roms recently. which if you find a solution then share with me asap. am not releasing newer version of my roms cause am busy with my exams and not able to get enough time to fix these bugs.
1st of all am using da_g's kitchen for wm6.5:
here are the problems i am having..
1st. i use youtube that does not require touch flo 3d. you only provided me with the oem. i open application. it loads the videos section. but when i click on any video to view it, i get an error " cannot play this video" i have tried to cook flashlite3 as well as the oone in da_g's kitchens but with no help.
2nd where can i get oem or cab for htc gesture 2. tried searching.
3rd Da_g's recording modification with wm dialer is great. but is it possible to add it to htc dialer?? although have sent him this ques but still if other could fine a soln.
4th how to change link to chome photos directry
5th i dont want date and time setting to start on clicking clock at chome. i dont want anything to happen when i click on clock in titanium.
6th the volume managers do install and work fine normally. but during call, i do not get the call volume display to change call volume. instead i get the usual system and ring volume control display and am unable to change call volume. i have tried both standard and topaz volume manager. could be a build issue but not able to fins a soln yet.
am using notification menu with buttons. could this be causing the issue.?
if you are able to find any possible solutions then feel free to let me know.
Ok, I decided to write new thread because most of the rom makers I pm to didn't answer me at all. Some kind of secrets or whatever. I think we should help each other to improve our ROM's but maybe I'm wrong.
I have some issues in my owe ROM which I can't really fix. Maybe someone will know the solution
1. Some ROM makers wrote in their changelogs that now CommMgr is really closing without being on the process list all the time? How?
2. I'm using EZinput keyboard 2.0.33633 full qwerty and two keyboards should be available: full qwerty and phone keyboard. Only the first one is present in the system (the second one now is standard MS keyboard instead of phone keyboard 2.0 EZinput). Why? I changed the EXT package many times to make sure it's ok and all the time the same issue...
3. Is there a working method to change system rings to wav? Every time I do it then they doesn't work. Do I have to change also some registry value?
4. Windows Media Player dosen't play any videos. I changed mHub and mHubVO into some other versions but still no efect. What else could be the reason?
That's all what I'd love to know to make my ROM better
Thanks in advice!
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
michal_banszel said:
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
Click to expand...
Click to collapse
Dude, about the comm manager, I don't know which version of comm manager are u using. But I got my comm manager working good n closing when clicked on x button. All I can say is don't use any new version like 2.8 or topaz comm manager. Use the 2.7.1.4 version. It's OG diamond comm manager n works nice. I'm using the same version.
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
michal_banszel said:
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
Click to expand...
Click to collapse
Did u try the GEN Y sip menu..??
I heard someone there saying that if we have the touchflo installed, then only we can change between the phone pad n qwerty board. But touchflo brings some more diff probs elsewhere.
Surprising issue this.. Coz it works perfectly fine with ezinput 1.
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
michal_banszel said:
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
Click to expand...
Click to collapse
do u have a package of touchflo..?? If not, I'll mail it to you. Try to import it n see if it works. I had in the previous build of this kitchen.
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
michal_banszel said:
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
Click to expand...
Click to collapse
i dont know..check gen y thread..u will definitely get moe help there. its surely been talked about in that thread.
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
michal_banszel said:
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
Click to expand...
Click to collapse
nope its not only that, u definitly need the touchflo package, but that package conlicts with wm 6.5
the only thing we can do is wait for HTC to bring out its first WM 6.5 rom for diamond2, then we can take the new touchflo or ezinput package from that rom
about the windows media player issue, make sure u have the DShow OEM in your rom
yozgatg said:
nope its not only that, u definitly need the
about the windows media player issue, make sure u have the DShow OEM in your rom
Click to expand...
Click to collapse
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
michal_banszel said:
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
Click to expand...
Click to collapse
there a slight newer one in my kitchen, here are the oems i use for multimedia:
- DShow_2_00_19143426_0
- mHub_6_57_080529_E0
- mHubVO_1_75_090515_X0
u should also check the following drivers in OEMDrivers:
- qtv.dll
- qtv_mp4_decoder.dll
try replacing those drivers
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
michal_banszel said:
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
Click to expand...
Click to collapse
just check the link in my signature, i released the full kitchen of my rom
Thanks man!
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
michal_banszel said:
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
Click to expand...
Click to collapse
Hey Michal,
found something that may help with the face down mute issue
pranavsethi said:
Hi,
Does mute on face down work?
Its not working on mine TD and would be glad if someone can get me to know how to get it working.
Even Checked HKLM, and there is no entry in Phone sector for Face down mute.
Kindly advise.
.............................
Pranav
Click to expand...
Click to collapse
cednicek said:
Try copy reg code from windows mobile 6.1, where it worked... I think i could work.
CODE: HKEY_LOCAL_MACHINE\Software\HTC\PHONE and change FaceDownMuteRing to 0 (default is 1)
Anybody has this problem?
Click to expand...
Click to collapse
Hope this helps
Thanks dude but it doesn't work. I was trying with both, 0 and 1 to make sure but still no effect. Friend of mine checked some others 6.5 ROM's and it seems that it doesn't work in any of them.
I found out that automatic time and date set works only if 3G/SHDPA network is available. So this question is out of date.
If anyone find the solution with face down mute ring then please let me know.
Another issue that I was hoping to solve is contact list popping up every time after SR. So in titanium softkeys registry I changed SK1URL into HTCActionScreen. And now... HTCActionScreen popping up every time after SR. Any solution for that?
Till now i have found just about everything in xda! Even a similar thread for the same problem but no solution at all!
Thing is, my hd takes too long to wake up for an incoming call..resulting in missed calls all the time..Ring starts in about 3,5 tones..!!! It wakes almost instandly (backlight) but it takes a lot of time to draw the picture etc and THEN starts ringing..
[i am on MIRIS V18 wm6.5, using the default WM dialer with the sliders (not htc's one!) and csdev for autolocking after wake up]
I had similar problems in many roms, even 6.1 .. with the fastest one being 1,5 tone then ring.. Its allready too long for me! I have tried some tweaks, i am not using mp3 for ringtone, using instant ring from hdtweak and no ring delay setting etc..still no luck..
What can be done? I know that many users have the same problem, even with stock roms.. Its same for such a device to be able to do everything sooo sweat but not the phone function!!
So any special tricks?? (font, gdi cache etc settings?) i heard that with sktools and advanced configuration tool etc you can do actually much about that!
Feel free to post your experinces as well, hoping that someone can provide us with a solution or a worthy workaround..!!
I've got the same problem, always have to call people back. Mostly takes about 5 seconds before the answerbutton works, while ringtone is already pissing off the other passengers in the bus
I still think the slow buildip is caused by Wisbar Advance, I used the HD Tweak aswell.
Very Good POST yes you are right many peoples have the same problem i have the same problem!
So i try with HD tweak "Ring without delay" i try with Advanced config and etc Again the same really when someone ring me no matter from the ringtone or anything the phone start ringing after few seconds!
I make few test and what i saw is that if the phone is sleeping when someone call you take longer your phone to wake up and ring
then i try again with no sleepy phone, again ring with delay so i can say if the phone sleep he need few seconds to ring like 5 seconds if the phone not sleep he need 3-4 seconds But at all This is serious problem and maybe is time we to fix this!
I don`t see any point this device to be able to do so much things and we always to Upgrade them but the phone function that we use everyday to make us troubles!
I have this problem with the stock room when the phone was brand new, after i flash the phone with Davideuck V 5 have the same and now im with Davideuck v7 and again is the same ! so no matter what kind of room or radio version you use this problem is real... and really the phone ring with DELAY
Will be perfect if anyone can find desigion of this problem and our phones to start ring immediately without any delay !
Thanks
I have been struggling for months with well-known this 2-sec (far more than this !) delay. The HD tweak didn't work for me either. Furthermore, it has been reported that even if this setting is changed, it is self-reset after a soft reset !
The only solution I found is replacing the HD Caller ID with the WM default one. It is very ugly compared to the modern HTC one, but now my phone takes only 1 sec to respond, that is, wake up, show the Caller ID screen and start ringing.
This replacement can be done from the settings of the HD tweak.
Please let me know if this works for you ! I'm running stock ROM.
Yes if we use the default WM dialer the PHONE is very very fast and ring without ANY delay but its very UGLY so maybe the problem is in the dailer!
Like i say no matter what room you use yes its the same for me with the default WM and the phone just think faster than me
Maybe some programers must to chek this out why this heppand maybe the HD dialer is too heavy?
Yes,thats true! But i am using wm dialer, not htc's one!! Still far from fast..(although i am on wm 6.5 where the default wm dialer with the answering sliders looks awesome, its buggy and slow as hell..[because it needs that the phone is locked in order to run so])
So as i asked around in a major greek forum i have found out that 99% of hd users have the same issue! [that 1% doesn't give a s&@t !]
Here too..What can we do about it..?I am starting to think the 1,5 tone delay as acceptable value..[told you i am on 3+ right now!!] Does anybody know if windows 6.5 that lock with external programm [like csdev] on wake up take normaly so long? Ideas...?
it's always not a good idea to fresh new rom too often
coolmicko said:
it's always not a good idea to fresh new rom too often
Click to expand...
Click to collapse
That has nothing to do with the problem man..!
If we could find a way to minimize the load on wakeup!! (so the hd has nothing to load more than the phone function!)is it possible?
Like i told you with the default WM dialer with WM 6.1 the phone ring without delay and is like every normal phone so this mean that the problem is in the dialer..
I think that the HD dialer is too heavy or buggy and this is the reason why take so long to wake up.. the phone!
Maybe some programers must to chek this out what is the diference betwen the default WM dialer and HD dialer we all know what is the diference.. but i mean the diference not how they look like how they are made and all other litle codec files..
So maybe we can find solution to update the HD dialer to be fast as the default WM one..
No matter you are with WM 6.5 and etc.. because till the problem is not solved no matter what room you will use the dialers will be the same made from the same files..
to resolve this we need to know what exactly is the problem to be able to fix it!
Like i say i think that we can find answers in the DIALER but im not programer..
this is very true and this is a very good post gonna supscribe to instant email about it right now ... i think the problem is not only in the dialer i have a stock rom and i had the problem since the very first day but i got a greater delay after installing spb pocket plus while i am not actually using manilla anymore and even a greater delay after installing wisbar advance 3 ... maybe the solution would be in the processor priorities i dont know
So far, i haven't found any solution .
I already made the same post a few months ago :
http://forum.xda-developers.com/showthread.php?p=3902624#post3902624
there's got to be a way guys!!
Some time ago, both sides recording was a total NO(!) for htc devices!! They say it was HARDWARE ISSUE and nothing could be done!(for over a year+) Then .. ICR and..voila! We even got tmc now! !
Is it possible to have the slugiest of all phones?? no way!
I think is a question of time we to find solution for our problem with the phone ringing delay!
Managed to get it to 1,5 rings in the same situation!( as i described before, no rom change etc..i was on 3,5 + rings remember!!)
I installed advanced config tool and played with the phone and performance settings.. performance almost set to max values..(font cache etc..)
Phone settings no delay, end key delay from 3000ms to 0 etc..(there are some settings there, so be sure to know what you are doing or backup first!)
Think i can get it to 1..!which will be extremely fast from what i experienced so far!!
Note: the improvements are for the second+ call after a softreset! The first one is ALWAYS slugish!!
Hi kostasalfa,
Mind posting your Adv Config settings? Thanks.
After long... long search I found maybe a solution:
HKCU\ControlPanel\Sounds\RingTone0
Script value to av0pr
I'm going to test but it seems the true way ^^ (thx to AX3L)
D'rath
Ok .. not a "true" solution but got INSTANT ring! (before the end of the first tone!!)
As i said i was on wm 6.5 using the kinda buggy default lock etc...After my advan.config setting which was an improvement i did the following! Stopped csdev and so the deafult lock! I did go back to S2U2 !! (warning,important: set delay after wake up to 300 or better 400 ms!!) And then i tried resco contact manager!(again!) But there is a new beta free for all of you in their forum!( http://www.resco.net/forums/ShowPost.aspx?PostID=24957 ) Set it to HANDLE INCOMING CALLS! Soft reset.. and voila!! (install s2u2 in device..resco better in sd!)
As i said..not a true solution but i GOT INSTANT RING!!
DONT FORGET TO USE HD TWEAK TO REVERT TO DEFAUL WM DIALER, NOT HTC;S ONE!!!
Try abd tell me if it worked for you!
i use the new energy rom 6.5 standard hav no problems with ring time or receive any late calls or miss calls u guys must check out the roms before loading them
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
tatou said:
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
Click to expand...
Click to collapse
Good news! Resco did it i think..
(i may try the energy rom as wingtytn suggested but i dont think its a roms issue..Ps:wingtytn try to call yourself from another phone to see WHEN it starts ringing..if you got no issues i would lke to know!you use wm stadar dialer?etc!)
Hi guys,
sorry to bother you guys but i have got a small problem...
I did a hard reset and installed all the HTC updates including the enhance the stability of sms update...
Now everytime i send a message, on the top of my screen (where the battery icon, clock are) a new icon appears...
If i click it a message appears with the message: message was sent successfully ...
I don't want to get this message... it's annoying when you have to send multiple messages...
I tried searching in the messages settings and the notification settings but can't find it... anyone an idea?
Advanced Configuration Tool will take care of that for you, as well as many other things.
i found a cab that solved the problem...
Just installed it, messages gone
Thx for the intel anyway
So question - what cab did you install? I've tried using Advanced Config Tool - but even on "disabled" mode for this feature it still happens! (Stock 6.5 ROM, unlocked, UK, TP2).
Thanks as this is driving me nuts,
Adam.
Advance toolkit did not work on my verizon tp2 either there is a cab file called "Updated Disable Verizon Message Sent Popup" or something similar (I have 3 different ones) Find that, install the cab and RESTART THE PHONE. (if you don't restart the phone it will still do it and you'll think the cab did not work but it does.)
hi noob sneak
what cab was that i have triued all the above to get rid of this notification.
since i installed all the HTC updates including the enhance the stability of sms update..
even tried the Updated Disable Verizon Message Sent Popup
Please, tell us what cab you used because i REALLY HATE that DAMN STUPID useless notification!
This cab works fine....used it for my roms....
Regards,
WC
Thanks WildChild - worked for me where nothing else had (Stock UK WM6.5 TP2). What registry values does it change or what does it do?
Adam.
thanks WildChild- installed and worked straight away not even a reboot.
was doing my head in
I love you man, that stupid notification is ungodly annoying!
adamchap said:
Thanks WildChild - worked for me where nothing else had (Stock UK WM6.5 TP2). What registry values does it change or what does it do?
Adam.
Click to expand...
Click to collapse
HKLM > Software > Jataayu > Messaging >
DWord: DisableSMSSuccess
Value: 1 - disabled, 0 enabled.
Thank you very much. it's working for my htc hd2 .