Related
As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).
The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .
You can download my ROMs, they come with the full package
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?
Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP
Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.
strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?
Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.
From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )
Lol I can't belive I forgot to tell you that!
It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?
Thank you, here you go!
sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!
nevermind, it worked ok on the second attempt!
Hi All,
I did some search, but it seems there's no Error 270 topic for a Touch Diamond. And surprisingly that's the problem I have. Here's the deal.
For a whole duration of the day I've been trying to upgrade to 2.03 ROM, which would my first ROM upgrade. I tried the ROM from the phone's importer site, the HTC site, xda site, all lof them with the same result. After the RRU reaches 100% the mobile goes to Tricolor with "Upgrade ROM code error" message and the RRU shows says Error 270.
I searched the forum and saw that some of the people suggested to burn different HardSPL versions, so I tried burning the 2.03 with various HardSPL versions, 1.24, 1.30, 1.93 are the few I remember, there were more, both signed and unsigned, the last is SPL-1.93.OliNex unsigned -> all of them installed nicely, with a clean reset after them but the following upgrade to 2.03 failed every time the same way, Error 270, as usual.
I use an original USB cable and an XP OS that, at the moment of RUUing, runs nothing but the RUU.
By the way, I also tried doing the upgrade from the internal storage. I renamed the ~100MB file to the name specified in the Noob Guide (DIAMIMG.NBH) and put it at the root of the storage device, but the bootloader gray screen says no image found (or something similar and goes directly to trying to find a USB host).
OK an Update (for whoever gets this problem after me).
I'm not sure why the installation from PC failed time after time - this is something for smarter people to find out.
I solved it by eventually managing to copy one of the numerous RUU_signed.nbh I tried, to the Internal storage, renaming it to the DIAMIMG.NBH and running the bootloader procedure.
Why didn't this work for a 6-10 times I did this before, I donno, the important thing that now it did, and I'm going to enjoy my diamond starting this moment.
Error Code 270
Dear Hunter_I
i have HTC Touch Diamond
i m facing the same problem. and i even dont know how to find the file and how to copy it in HTC internal storage
it is totally un accessible for me
can u help me in this regard
regards
Khurram
Dear Hunter_I
i have HTC Touch Diamond
i m facing the same problem. and i even dont know how to find the file and how to copy it in HTC internal storage
it is totally un accessible for me
can u help me in this regard
regards
Khurram
Hello,
I'll be happy to help to the extent I can.
But can you please specify where you stand right now?
I mean, what steps did you take already and where did you stop?
For example,
Do you have Hard SPL installed already?
What's the ROM you currently have?
Can your phone boot up correctly? Can it sync with your PC?
Is your phone locked?
Let me know some details.
Hello everyone, it's me again...
Please read this first, as it is the reason why I started MTTY. http://forum.xda-developers.com/showthread.php?p=10487426#post10487426
I used this guide to MTTY http://forum.xda-developers.com/showthread.php?t=540290
I did exactly as described in the guide, exept for the "Remove Watermark" thing, as it is for windows x65 and x84. I have a 32 bit system.
I used the Energy.DIAMOND.28244.Sense2.5.Cookie.2.0.Dec.21.7z ROM
I used the "flash from internal storage" method. Again, I did exactly as the guide described. I did change the ROM name to what is described in the guide, and when i did that, my pc warned me if i changed that which was after the .xxx , the program couldnt work properly anymore. I continued anyway because I was pretty sure it would work. I changed the name to DIAMIMG.nbh
Maybe that's what's wrong?
I used the MTTY program, and selected USB.
I typed: set 14 0
I typed: task 29
In the guide, only one file failed to be erased. I had four un-erased blocks.
I typed: task 8
I immediatley disconnected my device and held vol down and back for over 2 minutes. The startup screen came, which displayed TouchDiamond as normal, but this screen stays there forever, no matter what I do.
The only thing I can do is enter bootloader. Then, when i hook my device up to my computer, "serial" changes to "usb". When i check control panel--> device manager, I can see my device is hooked up. When i disconnect, it isn't there anymore. That means my pc still recognizes my htc.
Is there any way to fix this? Was it a wrong ROM version? Was it a Wrong HardSPL version? Please help me.
I've made a backup before I even started with the Hard SPL, but i'm not sure if thats the ROM, or the settings and some files on my internal storage. It's about 30-60 MB.
Please help me.
Also, I have downloaded the original rom from htc, but i'm not sure how to flash this, as activesync doesn't recognize my HTC device.
Again, please help me. There has to be a way.
Thanks in advance
connect ur diamond to pc and flash from PC
btw u can still get ur original rom from htc netherland site....use ur serial number in ur device
I downloaded the rom from the htc site. i just flashed it and it works.
Now how to flash the energy rom? im still not sure which method to use, because it's now working like the htc one. it's a .z7 file. The htc rom was just double clicking and following the instructions. It may sound stupid, but i dont want it to happen again
Happy it's working again tho.
glad ur device is working again. and dont worry if it happens again. becoz you can bring it back with htc rom always.
if i may suggest, how about you try a non-energy rom jus to kick in the confidence in you.
try another custom rom....then you can be sure if its really ur device or the energy rom file that is corrupt.
some users hav had issues with their energy rom files downladed being corrupt
Arthedes said:
I downloaded the rom from the htc site. i just flashed it and it works.
Now how to flash the energy rom? im still not sure which method to use, because it's now working like the htc one. it's a .z7 file. The htc rom was just double clicking and following the instructions. It may sound stupid, but i dont want it to happen again
Happy it's working again tho.
Click to expand...
Click to collapse
Hi there...
File with z7, it's compressed file. You need to extract it first to a new folder. Then you can try to flash again.
Hello again.
I did notice when i first downloaded the energy rom that it was a 7z file. But when i tried to unzip it, there was no such option in the drop down menu. This is my mums pc, so I think it's not installed on this pc.
I'll try to unzip it today after school.
If it doesn't work then, I'll try to flash a few other roms, just to be sure.
I'll keep you updated. Thanks for the fast replies tho^^
It's working! I just used 7Zip and ran the RUU included with the ROM. Ill try several as maxsence 2.5 is a bit sluggish, ive tried two, but the 23699 build doesn't have cookie 2.0
Really happy and thanks for the replies, guys(or gals)
see...i told you so...this is called the "CROSS CHECKING"....
now do you (or everyone else) believe me when i say there are some energy rom files that are corrupt or refuse to flash to diamond.
no, it was not corrupt, I was just so stupid not to unzip it first, that's all.
There may be some files that are corrupt, but i haven't witnessed one.
Now i know how to, i'm one die-hard flashin' mother******
TY^^
Arthedes said:
no, it was not corrupt, I was just so stupid not to unzip it first, that's all.
There may be some files that are corrupt, but i haven't witnessed one.
Now i know how to, i'm one die-hard flashin' mother******
TY^^
Click to expand...
Click to collapse
thank God if you're aware of your shortcomings...
I'm proud of people who really gentleman
hey guys
how could me remove linux from my kaiser?
help me please
If you have your WM rom, you need to change it's name to KAISIMG.NBH and copy it to root of your sdcard, then you should be able to install it from your bootloader.
If it doesn't work, you can go to bootloader, connect your device to computer with USB cable and then flash with RUU just like you had with WM, it will go straight to flashing instead of checking battery level etc like it was when flashing with booted WM.
I hope you will understand me
Thanx for the reply
i tried the two ways but with no result
it's hang up at 1% in the case of using usb
and hang up at (loading...) in the case of using sd card
if there is any way else please help me
sorry for my bad english
thanx again
msichal said:
If you have your WM rom, you need to change it's name to KAISIMG.NBH and copy it to root of your sdcard, then you should be able to install it from your bootloader.
If it doesn't work, you can go to bootloader, connect your device to computer with USB cable and then flash with RUU just like you had with WM, it will go straight to flashing instead of checking battery level etc like it was when flashing with booted WM.
I hope you will understand me
Click to expand...
Click to collapse
I'm pretty sure he also needs a corresponding WM kernel to go back to winmo.
read this ..the section that will interest you is at the end of opening post.
http://forum.xda-developers.com/showthread.php?t=680518
Hi,
I think I followed all instructions to switch back to WiMo in the sticky thread.
For a second the display shows a screen with four colours:
KAIS130
SPL-3.34.0000
CPLD-8
Then the screen turns to grey showing:
Loading ...
but nothing else happens.
Data on my sdcard:
KAISDIAG.NBH form the sticky thread
KAISimg.nbh (renamed RUU_signed.nbh) form rom file from this thread:
forum.xda-developers.com/showthread.php?t=379554
Do I have the right files on my sdcard?
My phone: Vodafone 1615 from german
Any suggestions?
thanks,
Hello ,
i bought my DHD few days ago , it is shipped with the last GB update , Android version 2.3.5 , Sense 3.0 , software number 3.13.415.2 ...
i know how bad that looks , cuz rooting the GB shipped dhd seems to be pain in the ass ...
i started to look for it before making a new thread, i found 2 solutions , AAHK and HTC DEV TOOL .
starting with htc dev tool , i read that it has many disadvantages , and a lot of custom roms wont be able to be flashed after using this method in rooting , so i decided to choose the AAHK which seems much better , but i faced a major problem , the downgrading of the dhd ...
i started to root using AAHK , did every thing was written in the notes ,disabling av , installing drivers , usb debugging ....etc
1- connected the phone
2- pasted the password
3- pressed 1 to start hacking
4- i was asked to downgrade , i chose yes
here comes the problem , cuz the aahk started trying to download the PD98IMG , it completes 20 try then stops .
i took the link of the PD98IMG , and downloaded it myself , its a zip file sized 256 mb ... i put it in the file that has the same name in the kit , and started over again , nothing happened .... pasted it to the sd card and started again , nothing happened also , and the kit tries always to download the PD98IMG with no result .....
did i make any mistake ?
did i miss a step ?
any help will be appreciated , thanks in advance
it's not a big deal... just take the downloaded ROM "PD98IMG.zip" and copy it to the root of your SD card, then go to hboot "turn off the phone and then start it with power+vol down " it'll take you to the hboot menu " white screen with few options " it'll scan your sd card and automatically prompt you that if you wanna install the discovered ROM or not, choose yes and you must be ready to go.... hope that what i said is helpful and guys correct me if I'm wrong..
if i helped please press the thx button
SpiritStealer said:
it's not a big deal... just take the downloaded ROM "PD98IMG.zip" and copy it to the root of your SD card, then go to hboot "turn off the phone and then start it with power+vol down " it'll take you to the hboot menu " white screen with few options " it'll scan your sd card and automatically prompt you that if you wanna install the discovered ROM or not, choose yes and you must be ready to go.... hope that what i said is helpful and guys correct me if I'm wrong..
if i helped please press the thx button
Click to expand...
Click to collapse
thx pal , the problem was in "PD98IMG.zip" downloading step because of the internet proscription in Syria , i used a proxy bypass software and everything wnet perfect ... it took some time to download the image but it deserves waiting .... lol
ghassan haddad said:
thx pal , the problem was in "PD98IMG.zip" downloading step because of the internet proscription in Syria , i used a proxy bypass software and everything wnet perfect ... it took some time to download the image but it deserves waiting .... lol
Click to expand...
Click to collapse
mine transfers the file to sd card but hboot wont show any option to press the volume up key to start the downgrading process please help
looks like you have a problem with downloading the downgrade ROM due to your slow internet speed?
I suggest that you should download and install this stock rom
___h t t p ://shipped-roms.com/download.php?model=Ace&file=RUU_Ace_TELUS_WWE_1.84.661.1_R_Radio_12.35d.60.140f_26.06.03.24_M2_release_168987_signed.exe
This is an old stock rom but it will make the AAHK be able to root without downgrading the ROM. Since the link above is a direct link, you can add it to any download manager which can accelerate your download speed. It is faster than letting the AAHK download the old rom by it self.
Hope this help
Can anyone tell me how to install the driver correctly from the AAHK pack. I go to tools then win and install from there. Then I run the program and it gives an error message. Can anybody tell me what seems to be the problem. Thank you for your help guys.
What is the error message ?
Are you talking about the adb drivers ?