Related
Can anyone help me remap the home key so it opens VC 1.6. Right now when I press it it opens voice speed dial not VC 1.6.
ch8 said:
Can anyone help me remap the home key so it opens VC 1.6. Right now when I press it it opens voice speed dial not VC 1.6.
Click to expand...
Click to collapse
Which ROM are you running on your device.....?
I am running the rogers WM6 rom
Remap
ch8 said:
I am running the rogers WM6 rom
Click to expand...
Click to collapse
Try to find this download {eT9 Excalibur.0409.Kmap}, I believe this is what you need! Just copy to the Windows folder..................!
Thanks I did d/l the file but I have no idea how to make voice command launch since they are using program codes here.
//
// N O T E: This file must be saved as Unicode
//
// This file contains the virtual keys mapping table for the
// Excalibur device. The mapping table is define as follow
//
// VK_TPOUND = 0x78
// VK_TSTAR = 0x77
// VK_TAB = 0x09
//
// We do not support escape value yet. So the key/char values should be
// entered explicitly or by encoding start with 0x
//
// Format:
// {VK VK' CH1 CH2}
// VK -> value from keyboard driver
// VK' -> printed on keys
// CH1 -> symbols produced by Fn + key
// CH2 -> symbols in 123 mode
// KeyIndex -> matched the kdb key index, 0xff -> no key index
{Q Q % % 0x00}
{1 W 1 1 0x01}
{2 E 2 2 0x02}
{3 R 3 3 0x03}
{T T + + 0x04}
{Y Y ( ( 0x05}
{U U ) ) 0x06}
{I I - - 0x07}
{O O _ _ 0x08}
{P P " " 0x09}
{0x78 A # # 0x0a} // VK_TPOUND maps to Device Button A
{4 S 4 4 0x0b}
{5 D 5 5 0x0c}
{6 F 6 6 0x0d}
{G G / / 0x0e}
{H H ? ? 0x0f}
{J J @ @ 0x10}
{K K $ $ 0x11}
{L L = = 0x12}
{0x77 Z * * 0x13} // VK_TSTAR maps to Z
{7 X 7 7 0x14}
{8 C 8 8 0x15}
{9 V 9 9 0x16}
{B B ' ' 0x17}
{N N & & 0x18}
{M M ! ! 0x19}
{0xBC , ; ; 0xff} // 0xBC = VK_COMMA
{0xBE . : : 0xff} // 0xBE = VK_PERIOD
{0 0x09 0 0 0xff} // 0x30 = VK_TAB
{0xE9 0xE9 0xC1 0xC1 0xff} // Launch Camera with Fn
Copy To The Windows Folder
Copy the download to the Windows folder,don't take the download out of the package leave the download in the package, just copy it to the Windows folder, soft reset the device.
Actually, this is an interesting topic in itself, i.e. remapping the long-press (aka. press-and-hold) functionality of the HOME key. For example, I'd like to change it to be something completely different (perhaps the VITO AudioNotes recorder, for example), and it doesn't look like this can be achieved from fiddling with the keymap (kmap) file.
On the some smartphones, the long press of the HOME key can be tweaked by simply replacing the default application that gets loaded by tweaking the appropriate registry key. For example, on the Motorola Q, the long-press of the HOME key brings up the quickapp.exe (i.e. the "quick list" that seems to come up on my T-Mobile Dash w/WM6 when I quickly press the Power button). So, if I had a Motorola Q, all I'd need to do was go to:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:MSQuickApp\1
and replace quickapp.exe with something else.
I just can't figure out the right place to tweak things for my Dash. All I know is that now when I press-and-hold the HOME key it brings up the Voice Recorder. I can't even find where the Voice Recorder program is stored... it's link file (.lnk) in the Start Menu contains:
22#:MSTNOTES?:notesapp
And I can't seem to find any reference to notesapp (either in the \Windows directory -- e.g. no notesapp.exe or notesapp.lnk, nor in the registry).
My only hint was to look under HKLM\Software\Microsoft\Shell\Rai\:MSTNOTES
but there I found that it was referencing ":MSPOUTLOOK notes"... Another mystery to me. It feels like I'm going through magic rabbit holes like Alice in Wonderland, that lead to nowhere...
Anyone with some further insights on this?
Remap Home key for Voice Command
Will the above keymap change the rest of my keys? I don't know how to read those things, so I can't just create my own keymap by changing that one line.
For me holding the Home key launches Voice Command. Do you have App3 selected as the voice Button? Do you have voice command enabled. I am using an s621 with the Rogers WM6 ROM.
Hi there,
I'm having a big issue, when trying to remove an XElement from an XML file created in IsolatedStorage.
--------------------------------------------------------------------------------------------
Code to CREATE the XML file
Dim File_to_Create As String = "Tracks.xml"
Dim file As XDocument = <?xml version="1.0" encoding="UTF-8"?>
<dataroot xmlnsd="urn:schemas-microsoft-comfficedata" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="Cartridges.xsd" generated="2010-11-23T14:26:55">
<Carts>
<CART_NAME>First</CART_NAME>
<CART_COLOR>White</CART_COLOR>
</Carts>
<Carts>
<CART_NAME>Second</CART_NAME>
<CART_COLOR>Black</CART_COLOR>
</Carts>
</dataroot>
Dim isoStore As IsolatedStorageFile = IsolatedStorageFile.GetUserStoreForApplication()
Try
If isoStore.FileExists(File_to_Create) Then
MessageBox.Show(File_to_Create + " TRUE")
Else
MessageBox.Show(File_to_Create + " FALSE")
Dim oStream As New IsolatedStorageFileStream(File_to_Create, FileMode.Create, isoStore)
Dim writer As New StreamWriter(oStream)
writer.WriteLine(file)
writer.Close()
MessageBox.Show("OK")
End If
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
'open selected file
Dim isoStream As IsolatedStorageFileStream
isoStream = New IsolatedStorageFileStream(File_to_Create, System.IO.FileMode.Open, System.IO.FileAccess.Read, isoStore)
Dim XML_File As XDocument = XDocument.Load(isoStream)
Dim Cart_Query As System.Collections.IEnumerable = From query In XML_File.Descendants("Carts") Order By _
CStr(query.Element("CART_NAME")) Descending, CStr(query.Element("CART_NAME"))
Select New Class_Cartridge_Data With {.Cart_Name = CStr(query.Element("CART_NAME")), _
.Cart_Color = CStr(query.Element("CART_COLOR"))}
Me.ListBox_Cartridges.ItemsSource = Cart_Query
isoStore.Dispose()
isoStream.Close()
End Try
--------------------------------------------------------------------------------------------
Code to ADD / EDIT XElement
Dim File_to_Create As String = "Tracks.xml"
Dim XML_IsolatedStorage = IsolatedStorageFile.GetUserStoreForApplication()
' Check that the file exists if not create it
If Not (XML_IsolatedStorage.FileExists(File_to_Create)) Then
Return
End If
Dim XML_StreamReader As New StreamReader(XML_IsolatedStorage.OpenFile(File_to_Create, FileMode.Open, FileAccess.Read))
Dim XML_Document As XDocument = XDocument.Parse(XML_StreamReader.ReadToEnd())
XML_StreamReader.Close()
' Update the element if it exist or create it if it doesn't
Dim XML_XElement As XElement = XML_Document.Descendants("Carts").Where(Function(c) c.Element("CART_NAME").Value.Equals("First")).FirstOrDefault()
If XML_XElement IsNot Nothing Then
XML_XElement.SetElementValue("CART_NAME", "Third")
Else
' Add new
Dim newProgress As New XElement("Cartridges", New XElement("CART_NAME", "Fourth"), New XElement("CART_COLOR", "Blue"))
Dim rootNode As XElement = XML_Document.Root
rootNode.Add(newProgress)
End If
Using XML_StreamWriter As New StreamWriter(XML_IsolatedStorage.OpenFile(File_to_Create, FileMode.Open, FileAccess.Write))
XML_StreamWriter.Write(XML_Document.ToString())
XML_StreamWriter.Close()
End Using
--------------------------------------------------------------------------------------------
Now my issue and request for some help!
If I use
XML_XElement.Remove
then the following exception is raised whenever I try to "refresh" the bounded ListBox
System.Xml.XmlException was unhandled
LineNumber=37
LinePosition=12
Message=Data at the root level is invalid. Line 37, position 12.
SourceUri=""
StackTrace:
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(Int32 res, String resString, String[] args)
at System.Xml.XmlTextReaderImpl.Throw(Int32 res, String resString)
at System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.Linq.XContainer.ReadContentFrom(XmlReader r)
at System.Xml.Linq.XContainer.ReadContentFrom(XmlReader r, LoadOptions o)
at System.Xml.Linq.XDocument.Load(XmlReader reader, LoadOptions options)
at System.Xml.Linq.XDocument.Load(Stream stream, LoadOptions options)
at System.Xml.Linq.XDocument.Load(Stream stream)
at ListBox_Data_from_XML_LINQ.MainPage.Button_Create_XML_Click(Object sender, RoutedEventArgs e)
at System.Windows.Controls.Primitives.ButtonBase.OnClick()
at System.Windows.Controls.Button.OnClick()
at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
at System.Windows.Controls.Control.OnMouseLeftButtonUp(Control ctrl, EventArgs e)
at MS.Internal.JoltHelper.FireEvent(IntPtr unmanagedObj, IntPtr unmanagedObjArgs, Int32 argsTypeIndex, String eventName)
InnerException:
--------------------------------------------------------------------------------------------
In short, I can add or edit, but cannot DELETE an XElement...
Any ideas?
Thanks in advance!
Can you post the code you are using for XElement.Remove and use code tags so the formatting is right. Its the # button on the post toolbar.
Ren13B said:
Can you post the code you are using for XElement.Remove and use code tags so the formatting is right. Its the # button on the post toolbar.
Click to expand...
Click to collapse
Well, I did nothing special, just the XML_Element.remove, instead of adding a new xelement.
Then the error raises whenever I try to reopen the XML file.
My point is, how can I delete an specific xelement?
As far as I know, the following code should work
Code:
Dim XML_XElement As XElement = XML_Document.Descendants("Carts").Where(Function(c ) c.Element("CART_NAME").Value.Equals("First")).Firs tOrDefault()
If XML_XElement IsNot Nothing Then
XML_XElement.SetElementValue("CART_NAME", "Third")
Else
' remove the selected record
XML_XElement.Remove
End If
Honestly I don't know if the foregoing code is correct or if the issue is related to how WP7 handles the removal thus corrupting the original file.
Please let me know if you need anything else.
Any help is very appreciated!
PS: Thanks for the other replies, helped a lot!
Here's how I did it in c#. My xml file is very different than yours so the query will be different but the important parts are where you load and close the file streams and then write.
Code:
//Get users private store info
IsolatedStorageFile isoStore = IsolatedStorageFile.GetUserStoreForApplication();
IsolatedStorageFileStream isoStream;
//open selected file
isoStream = new IsolatedStorageFileStream(list, System.IO.FileMode.Open, System.IO.FileAccess.Read, isoStore);
XDocument xml = XDocument.Load(isoStream);
isoStream.Close();
//Find section
XElement sectionElement = xml.Descendants("section").Where(c => c.Attribute("name").Value.Equals(groupn)).FirstOrDefault();
//Find item and remove it
sectionElement.Elements("setting").Where(c => c.Attribute("name").Value.Equals(litem)).FirstOrDefault().Remove();
isoStream.Close(); //Seems unnecessary but it's needed.
//Write xml file
isoStream = new IsolatedStorageFileStream(list, FileMode.Create, FileAccess.Write, isoStore);
xml.Save(isoStream);
isoStream.Close();
Thanks again for your help, greatly appreciated.
However I'm still getting the same error.
Sorry for asking, but are you getting any errors when deleting in WP7 ?
My knowledge on XML is extremely new and I'm sure that I'm making some mistakes somewhere...
But so far, I cannot get past the same exception.
Seems that the XML gots "corrupted" after the delete operation.
On the other hand, if is not too much to ask for, using my current code, how will handle the delete of the selected record?
Thanks!
I have no problem at all removing elements in c#. I don't have vb support even installed right now. If you think it's a bug you should post on the forums at http://forums.create.msdn.com/forums/98.aspx
Ren13B said:
I have no problem at all removing elements in c#. I don't have vb support even installed right now. If you think it's a bug you should post on the forums at http://forums.create.msdn.com/forums/98.aspx
Click to expand...
Click to collapse
Problem is my country is not listed so I cannot register...
Here is the C# version of my current code for adding/editing
Code:
public static void ADD_XML_Record()
{
string File_to_Create = "Tracks.xml";
var XML_IsolatedStorage = IsolatedStorageFile.GetUserStoreForApplication();
// Check that the file exists if not create it
if (! (XML_IsolatedStorage.FileExists(File_to_Create)))
{
return;
}
StreamReader XML_StreamReader = new StreamReader(XML_IsolatedStorage.OpenFile(File_to_Create, FileMode.Open, FileAccess.Read));
XDocument XML_Document = XDocument.Parse(XML_StreamReader.ReadToEnd());
XML_StreamReader.Close();
// Update the element if it exist or create it if it doesn't
XElement XML_XElement = XML_Document.Descendants("Carts").Where((c) => c.Element["CART_NAME"].Value.Equals("dd")).FirstOrDefault();
if (XML_XElement != null)
{
XML_XElement.SetElementValue("CART_NAME", "bbbbb");
}
else
{
// Add new
XElement newProgress = new XElement("Carts", new XElement("CART_NAME", "dd"), new XElement("CART_COLOR", "ff"));
XElement rootNode = XML_Document.Root;
rootNode.Add(newProgress);
}
using (StreamWriter XML_StreamWriter = new StreamWriter(XML_IsolatedStorage.OpenFile(File_to_Create, FileMode.Open, FileAccess.Write)))
{
XML_StreamWriter.Write(XML_Document.ToString());
XML_StreamWriter.Close();
}
}
I tried your code but I'm having a bad time making it to work.
If not a big deal, please could you tell me how to modify it ?
I mean, if a record is found, instead of editing, to remove it?
Honestly I'm stuck and any help is more than apprecisted!
Ren13B said:
I have no problem at all removing elements in c#. I don't have vb support even installed right now. If you think it's a bug you should post on the forums at http://forums.create.msdn.com/forums/98.aspx
Click to expand...
Click to collapse
Ren,
Just to say thank you for your last code. I made a little mod and now it works ok!
Thanks a lot for helping me out!
Us T-Mobile users cannot flash Roms at the minute because the download mode button combo has been disabled.
Maybe there is a way to do this programatically or use a resistor accross certain USB pins like the Galaxy S method.
What's your opinion on this?
Sent from my OMNIA7 using Board Express
Yesterday I wasted some time playing around with the USB diagnostic port (enable in the Diagnosis app, it's the third USB mode option). Both PSAS and QPST can connect to and mess with the phone, so I think if someone knows his way around, the phone can be kicked into Download Mode.
(I only managed to crash the phone in many different ways, but I was really just monkeying around.)
If this can be done it would be great as this is the first phone I have owned where I cannot flash firmware myself.
Might be worth while seeing if everyone with a tmobile uk branded omnia 7 has this issue?
FYI I have included my firmware versions etc so we can try and collate a list of working/non working ones to see what the differences are if any.
os version 7.0.7004.0
firmware revision number 2424.10.10.6
hardware revision number 3.15.0.4
radio software version 2424.10.10.6
radio hardware version 0.0.0.800
bootloader version 4.10.1.9
chip soc version 0.36.2.0
KarmaXXK said:
Yesterday I wasted some time playing around with the USB diagnostic port (enable in the Diagnosis app, it's the third USB mode option). Both PSAS and QPST can connect to and mess with the phone, so I think if someone knows his way around, the phone can be kicked into Download Mode.
(I only managed to crash the phone in many different ways, but I was really just monkeying around.)
Click to expand...
Click to collapse
Yes, I tried the *#7284# code and changed the USB Path Control to "Modem, USB Diag" and my phone was recognised by the ROM Downloader but the phone was not in download mode.
I have stumbled upon something which may be what we are looking for though, after reverse engineering the Samsung Diagnosis app I notice there are codes to access 'Operator Specific' Admin areas in the app. Take a look at the attached image.
Now as you can see, the values listed cannot be typed into the Diagnosis app as there is a formula to decipher them. I have the formula but cannot get it to work.
Code:
Private Overloads Function GetHashCode(ByVal str As String) As UInteger
Dim num As UInteger = 0
For i As Integer = 0 To str.Length - 1
[B]num = ((num << 5) + num) + str(i)[/B]
Next
Return num
End Function
Now the bit highlighted in bold is the bit I cant get to work.
It gives the following error:
Operator '+' is not defined for types 'UInteger' and 'Char'.
Once someone can help to get this working, reversing the formula should in theory show us the correct *#000# code combination for each area.
Fingers crossed you can crack it!
lyriquidperfection said:
Yes, I tried the *#7284# code and changed the USB Path Control to "Modem, USB Diag" and my phone was recognised by the ROM Downloader but the phone was not in download mode.
I have stumbled upon something which may be what we are looking for though, after reverse engineering the Samsung Diagnosis app I notice there are codes to access 'Operator Specific' Admin areas in the app. Take a look at the attached image.
Now as you can see, the values listed cannot be typed into the Diagnosis app as there is a formula to decipher them. I have the formula but cannot get it to work.
Code:
Private Overloads Function GetHashCode(ByVal str As String) As UInteger
Dim num As UInteger = 0
For i As Integer = 0 To str.Length - 1
[B]num = ((num << 5) + num) + str(i)[/B]
Next
Return num
End Function
Now the bit highlighted in bold is the bit I cant get to work.
It gives the following error:
Operator '+' is not defined for types 'UInteger' and 'Char'.
Once someone can help to get this working, reversing the formula should in theory show us the correct *#000# code combination for each area.
Click to expand...
Click to collapse
I worked on this few days ago, I couldn't reverse the hash function but we had some brilliant ideas how to do it (see the stackoverflow thread about it http://stackoverflow.com/questions/4523553/reversing-a-hash-function)
but I used brute force and extracted some 60 diagnosis codes that you can find here http://www.martani.net/2010/12/windows-7-hacks-all-diagnosis-codes-you.html
and here http://www.martani.net/2010/12/windows-7-hacks-all-diagnosis-codes-you_26.html
This is great stuff martani if there is any way to decipher these ones, they may be worth looking at:
g_ADMIN_GENERIC = 3370684588
g_ADMIN_TMOBILE = 469486183
g_ADMIN_VODAFONE = 474092301
These ones indeed look very interesting and may offer a way to enable ADC or even the Download Mode some people like me have been looking for.
lyriquidperfection said:
This is great stuff martani if there is any way to decipher these ones, they may be worth looking at:
g_ADMIN_GENERIC = 3370684588
g_ADMIN_TMOBILE = 469486183
g_ADMIN_VODAFONE = 474092301
These ones indeed look very interesting and may offer a way to enable ADC or even the Download Mode some people like me have been looking for.
Click to expand...
Click to collapse
Actually the code is a little misleading, if you see closely, the enum HashCodeTable is used nowhere.
The app waits for user input, after each "tap" on a number it calls the function ParseDial() that hashes the input with GetHashCode then calls the function GetEnumFromList() on this hashed value.
In GetEnumFromList, there is no use of HashCodeTable and even the codes you provided are not hard-coded in this function. I am not sure why they are there but as far as I can tell, to access these parts of the diagnosis app, you need another method than dialing a code it seems
martani said:
Actually the code is a little misleading, if you see closely, the enum HashCodeTable is used nowhere.
The app waits for user input, after each "tap" on a number it calls the function ParseDial() that hashes the input with GetHashCode then calls the function GetEnumFromList() on this hashed value.
In GetEnumFromList, there is no use of HashCodeTable and even the codes you provided are not hard-coded in this function. I am not sure why they are there but as far as I can tell, to access these parts of the diagnosis app, you need another method than dialing a code it seems
Click to expand...
Click to collapse
Damn it! Looks like we are back to square one!
Have you seen also on the Samsung Galaxy S the Download mode is disabled on some devices, but some users made a jig where you bridge 2 pins with a certain resistor and it knocks the phone into download mode. Maybe this would work on the Omnia 7 also????
I am hoping for a software based fix rather than hacking together something.
**ALL** diagnostic codes for SAMSUNG devices
I reverse engineered the Diagnostic Menu Application. It contains a list of configuration "Titles" with corresponding hash-codes. I made a tool to reverse the hash-codes to dial-codes. The dial-codes may not be the same as some codes that were already known, but the dial-codes are absolutely correct for these menu. Differences are due to hash-collisions (same hash-code may have multiple possible dial-codes). I just used the shortest dial-codes for every menu.
The list of menu's is very long and I discovered that not all menu-codes were not actually implemented. I guess this list of codes is used for all Samsung devices (possibly also for Galaxy S and older Windows Mobile devices). So not all dial-codes may actually work on your device.
WARNING!! The menu's can configure low-level settings of your phone. And if you don't know what you're doing you may brick your device or maybe hard-reset the device and loose all your data and settings. Or you may faulty calibrate your sensors. Be very, very careful with experimenting!! I will not take any responsibility for damaging your device in any way.
I would personally be very interested if anyone finds a way to get the device in download-mode by using these menu's (I have a bad bootloader which does not let my Samsung Omnia 7 go into download-mode to flash it to a newer firmware).
By the way: the admin menu's are NOT implemented on the Omnia 7 :-(
This is the list with menu-titles, dial-codes and their hashcode:
Code:
FTAMain = 15 (0x686)
QUALCOMM TEST = *09# (0x17DB96)
TMOServiceMenu = *74*# (0x31710C2)
SMDINFO = *#03# (0x30C0953)
SIMPLE FUNCTION TEST = *#05# (0x30C0995)
IMEI NUMBER = *#06# (0x30C09B6)
VIEWHISTORYNW = *#07# (0x30C09D7)
LCDTEST = *#0*# (0x30C082A)
QWERTYTEST = *#1*# (0x30C0C6B)
BATT TEST = *#2*# (0x30C10AC)
BRIGHTNESS TEST = *#3*# (0x30C14ED)
TouchDelta 80 = *#80# (0x30C2AF8)
LIGHTTEST = *#12*# (0x648DBCDD)
BTLOGDUMP = *#232# (0x648E4E87)
WIFI FACTORY TEST = *#526# (0x648FEFED)
RILNETLOG = *#638# (0x649080D1)
RILDUMP = *#745# (0x64911110)
VPHONE770 = *#770# (0x64911D2E)
VPHONE771 = *#771# (0x64911D4F)
VPHONE772 = *#772# (0x64911D70)
VPHONE773 = *#773# (0x64911D91)
VPHONE774 = *#774# (0x64911DB2)
VPHONE775 = *#775# (0x64911DD3)
VPHONE776 = *#776# (0x64911DF4)
VPHONE777 = *#777# (0x64911E15)
VPHONE778 = *#778# (0x64911E36)
VPHONE779 = *#779# (0x64911E57)
SR TEST = *#780# (0x6491216F)
VT DUMP = *#938# (0x649225F4)
Disable Testbed = #12358# (0xFC28BE89)
Enable Testbed = *12358# (0x170067D0)
DEBUGMODE1 = *#0011# (0xF63246F2)
BATTERYINFO = *#0228# (0xF63364DC)
PHONELOOPBACKTEST = *#0283# (0xF6337DBD)
AUDIOTEST2 = *#0289# (0xF6337E83)
FMRADIORX = *#0368# (0xF6340241)
LIGHTSENSORTEST = *#0589# (0xF63523A6)
RRCVERSION = *#0599# (0xF63527E7)
AUDIOTEST = *#0673# (0xF635AB00)
SOUNDTEST = *#0675# (0xF635AB42)
RTC = *#0782# (0xF6363B81)
DEVICETEST = *#0842# (0xF636B6DE)
ILLUMINATIONTEST = *#0843# (0xF636B6FF)
MultiTouch = *#0987# (0xF63754E8)
SWversionFTA = *#1111# (0xF644EBD4)
MOUSETEST = *#121*# (0xF645774E)
SWversionEx = *#1234# (0xF645811A)
MOUSECAL = *#123*# (0xF6457FD0)
MOUSECAL06 = *#126*# (0xF6458C93)
GPSTEST = *#1575# (0xF6473762)
MICROUSB TEST = *#1793# (0xF6485864)
HWversionFTA = *#2222# (0xF6579518)
BANDSELECTION = *#2263# (0xF657A63D)
PHONEDUMP = *#2454# (0xF658BADF)
CAMERAUPDATE = *#2470# (0xF658C2DD)
CAMERADISABLE = *#2480# (0xF658C71E)
NAVIKEY TEST = *#2486# (0xF658C7E4)
INTEGRITY = *#2580# (0xF659537F)
TouchFirmare 2663 = *#2663# (0xF659D7C1)
TouchDelta 2664 = *#2664# (0xF659D7E2)
TouchDelta 2665 = *#2665# (0xF659D803)
RILNETLOG OFF = *#6380# (0xF6A09CC1)
RILNETLOG ON = *#6381# (0xF6A09CE2)
NETLOCK NETWORK = *#6955# (0xF6A3DAE9)
USBPATHCHANGE = *#7284# (0xF6B22965)
POWERONATTACH = *#7298# (0xF6B22E2A)
SELF DIAGNOSTIC MODE = *#7353# (0xF6B2A8E2)
DebugOption = *#7450# (0xF6B334E0)
ERROR REPORT ON = *#7451# (0xF6B33501)
ERROR REPORT VERIFY = *#7452# (0xF6B33522)
NETLOCK SERVICE = *#7755# (0xF6B4DAA8)
VPHONE DISABLED = *#77*0# (0xF6B4AB38)
VPHONE ENABLED = *#77*1# (0xF6B4AB59)
UARTCHANGER = *#9090# (0xF6D54562)
DEBUGDUMP = *#9900# (0xF6DA0E82)
PILEDUMP = *#9901# (0xF6DA0EA3)
NETLOG LOG START = *#9905# (0xF6DA0F27)
DEBUG RIL DUMP = *#9906# (0xF6DA0F48)
ERRORREPCAB INSTALL = *#9907# (0xF6DA0F69)
GUMITEST3G CAB INSTALL = *#9908# (0xF6DA0F8A)
SUWON3G CAB INSTALL = *#9909# (0xF6DA0FAB)
UARTPATH = *#9910# (0xF6DA12C3)
BATTERYMONITOR = *#9911# (0xF6DA12E4)
CONNECTION SETTING = *#9920# (0xF6DA1704)
VERIFYCOMPARE = *#9990# (0xF6DA34CB)
YSSHINTEST = *#9999# (0xF6DA35F4)
VersionScript = 19104#2* (0xD21FC43E)
BLUETOOTH LOG DISABLE = 20652609 (0x1598F3DE)
BLUETOOTH LOG ENABLE = 20652619 (0x1598F3FF)
BT SSPDEbugModeEnable = 20652629 (0x1598F420)
BT SSPDEbugModeDisable = 20652639 (0x1598F441)
OMADMCLIENT LOG DISABLE = 20653609 (0x1599803F)
OMADMCLIENT LOG ENABLE = 20653619 (0x15998060)
CELOG LOG DISABLE = 20654609 (0x159A0CA0)
CELOG LOG ENABLE = 20654619 (0x159A0CC1)
TOTALCALLTIME = 2934331* (0xC35403F3)
RESET CUSTOM = 35180948 (0x77496B66)
RESET FACTORY = 35190718 (0x775B7B02)
ERASE IMEIITEM = 35190728 (0x775B7B23)
IMEI ADJUST = 35190738 (0x775B7B44)
BLUETOOTH RF TEST = 3##65*88 (0xECE73A9E)
BLUETOOTH AUDIO TEST = 3##65*98 (0xECE73ABF)
AutoSimSetting = 40*047#3 (0xD1C556DF)
PVKKey = 40*549#3 (0xD21FD9E6)
RESET FACTORY WITHDEFAULTLANGUAGE = 76264513 (0x777E1362)
NONSLEEPCALL OFF = *#069*0# (0xBCEBFF49)
NONSLEEPCALL ON = *#069*1# (0xBCEBFF6A)
LEDTEST = *#14789# (0xBF1C1ADD)
DMSessionInit = *#15428# (0xBF2C7494)
CIPHERING = *#32489# (0xC3A095FA)
CAMERAUPDATESVC = *#32589# (0xC3A1225B)
LOGDUMPMGR = *#33284# (0xC3B19514)
SR DISABLED = *#780*0# (0xCD5F5D49)
SR ENABLED = *#780*1# (0xCD5F5D6A)
NETLOCK SUBSET = *#78255# (0xCD60A57B)
LAUNCH UAEDIT = *#92782# (0xD1A12DFC)
PdaBuildTime = *#99820# (0xD2204C1C)
VersionTime = *#99821# (0xD2204C3D)
WIFI TEST = 0373385#6 (0xECE73BA6)
EN LOCK NW = 074578132 (0xBBF27D35)
GCFTESTMODE ENTER = 086#58023 (0x1807BAE3)
FILE SYSTEM TEST = 089559715 (0x28F3F681)
AUDIOGAINCONTROL = 08#766104 (0x902D68E3)
DIS LOCK SUB NW = 17#991#3* (0x1D45A6AE)
PVKFileName = 18*357#25 (0x161B193C)
EN LOCK SUB NW = 193582504 (0xBC073A15)
GPSTESTTOOL = 1#8865#55 (0xF61EC09C)
EN LOCK CORP = 1*0273411 (0xF62C007D)
EN LOCK SVC = 1*0278411 (0xF62EBE62)
DIS LOCK NW = 20789802* (0x1D30E9CE)
SellOutSMS = 2615#0922 (0xD04CA8DE)
TFlashUnPairing = 30334*733 (0x51B892C4)
DIS LOCK SVC = 38025*93# (0xCA957BDB)
GPSTESTTOOL2 = 400#40*08 (0xB9F6D60D)
GPSTESTXTRA = 400#40*18 (0xB9F6D62E)
SerialNumber = 5317*0648 (0x6E256D8C)
EN LOCK SIM = 5494585*3 (0xBC051995)
SERVERURL = 553378683 (0xD8389060)
SLIDECOUNT = 584644021 (0xF0BF3052)
SellOutSMSTestMode = 597#*224# (0x96E7B26D)
APPSLAUNCHER = 5**6244*3 (0x33B0B76)
SLOGSERIAL M2 = 66#6757#1 (0x7050E07C)
AutoReceive Enable = 7160*5088 (0xEF2C5E0D)
TESTMODE = 718071#49 (0x8A09ACC8)
RESET SERVICE = 72673#00# (0xEC5B4BEF)
ReactivateSellOutSMS = 74201#086 (0x807DB65F)
AUDIOCODEC = 7#16#1#37 (0x902D68C2)
ADMIN GENERIC = 838*5448* (0xC8E890AC)
SLOGSERIAL ALL ON = 8644*3081 (0x705107AC)
VT MANUALSETTING = 8802*7*5# (0x104384B5)
DISLOCK SIM = 98217*243 (0x1D43862E)
DMTESTMENU = 9#7357764 (0x414D9633)
SLOGSERIAL ALL OFF = #22#6214# (0x7050E03A)
SLOGSERIAL M1 = #22#6215# (0x7050E05B)
SLOGSERIAL M3 = #22#6217# (0x7050E09D)
SLOGSERIAL M4 = #22#6218# (0x7050E0BE)
SLOGSERIAL M5 = #22#6219# (0x7050E0DF)
ADMIN VODAFONE = #75471648 (0x1C42130D)
DisableSellOutSMS = *4587*676 (0x903477AF)
BLUETOOTH SEARCH TEST = *#232333# (0xECE73AE0)
RANDOM BT MAC = *#232336# (0xECE73B43)
BLUETOOTH MAC VIEWER = *#232337# (0xECE73B64)
WIFI MAC VIEWER = *#232338# (0xECE73B85)
PRECONFIGURATION = *#638738# (0x213EF313)
SELF DIAGNOSTIC MODE DISABLE = *#7353*0# (0x6E008D7C)
SLOGSERIAL M6 = *#745*06# (0x7050E100)
DIS LOCK CORP = 00*2*2#524 (0xCA92BDF6)
ADMIN TMOBILE = 0612824763 (0x1BFBCA67)
AutoReceive Disable = 09925572#3 (0xD4B8217D)
SWversionIn = 1309653522 (0xECB23FC4)
GPSTTFFTESTTOOL = 154*068271 (0xF61EBC7C)
SellOutSMSProductionMode = 1#3341#5#0 (0x96D7C68A)
LOCK STATUS INFO = 28##**23*0 (0x7D8C72E3)
SWversionNewIn = 32456464#7 (0xFD58D7FC)
Heathcliff74 said:
I reverse engineered the Diagnostic Menu Application. It contains a list of configuration "Titles" with corresponding hash-codes. I made a tool to reverse the hash-codes to dial-codes. The dial-codes may not be the same as some codes that were already known, but the dial-codes are absolutely correct for these menu. Differences are due to hash-collisions (same hash-code may have multiple possible dial-codes). I just used the shortest dial-codes for every menu.
Click to expand...
Click to collapse
Can you share how did you reverse the hash function? I worked on this some time ago but finally just brute forced it to extract the keys.
I would also like to know how he reversed the hash codes! I tried for hours and had no luck!
Haha.. Well, I first tried to calculate the original dial-codes, but that seems to work only for dialcodes shorter than 8 digits (5 bits per digit, 32 bits hash-code = 32 / 5 = 7 digits + 1 digit for the extra add):
Code:
uint hash = 0; // enter hash here
string DialCode = "";
while (hash > 0)
{
uint digit = (hash % 33) + 33;
if (digit > hash)
hash = 0;
else
hash = (hash - digit) / 33;
DialCode = Convert.ToChar(digit) + DialCode;
}
return DialCode;
But this does not work for long dial-codes. So after that I just made a little program to brute-force it. I copied the enum with menu-titles and hash-codes to my project. Then I used reflection to populate a sortedlist. Then I started to brute-force and check all dialcodes for their hashcode and see if it exists in the list. If it exists, I add it to a textbox and remove the item from the list. That's it. So it is not really reversed, but my program took about an hour to get dial-codes for all the hashcodes in the enum.
Code:
SortedList<uint, string> hashCodes = new SortedList<uint, string>();
int l = typeof(HashCodeTable).GetEnumNames().Length;
string[] menunames = typeof(HashCodeTable).GetEnumNames();
for (int i = 0; i < l; i++)
{
try
{
hashCodes.Add(Convert.ToUInt32(Enum.Parse(typeof(HashCodeTable), menunames[i])), menunames[i].Substring(2).Replace('_', ' '));
}
catch { }
}
char[] chars = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '#', '*' };
for (int length = 1; length <= 20; length++)
{
ushort[] digits = new ushort[length];
for (int i = 0; i < length; i++) digits[i] = 0;
while (true)
{
// calc hash
uint hashCode = 0;
for (int i = 0; i < length; i++)
{
hashCode = ((hashCode << 5) + hashCode) + chars[digits[i]];
}
if (hashCodes.ContainsKey(hashCode))
{
int m = hashCodes.IndexOfKey(hashCode);
string str = "";
for (int j = 0; j < length; j++)
str = str + chars[digits[j]];
textBox1.Text = textBox1.Text + hashCodes.Values[m] + " = " + str + " (0x" + hashCode.ToString("X") + ")" + Environment.NewLine;
hashCodes.RemoveAt(m);
}
// increase
digits[length - 1]++;
for (int k = length - 1; k >= 0; k--)
{
if (digits[k] >= 12)
{
if (k == 0)
break;
else
{
digits[k] -= 12;
digits[k - 1]++;
}
}
}
if ((digits[0] >= 12) || (hashCodes.Count == 0)) break;
}
if (hashCodes.Count == 0) break;
}
Excellent stuff! Thank you for this very interesting code snippit!
WP7 diag codes
martani said:
Actually the code is a little misleading, if you see closely, the enum HashCodeTable is used nowhere.
Click to expand...
Click to collapse
This is because the compiler optimized out the switch statement and compiled the constants into the IL code for the hash codes.
Within the main switch statement where keypad entries are evaluated there are ~112 codes and I've reversed all of them. Writing hash algorithms is not straightforward and it's quite a simple one, since my app captured 2-3-4 variants of keycodes for the same hash value.
Regarding the most interesting entries at the top of the enum the ADMIN_ entries...those hash values are not handled by the application, maybe Samsung has another diag app or a different app which is using the same method.
The other thing I can think of is there are APIs in the diag app which one is sending the hash of a keycode to the given driver...I tried that but the ADMIN stuff did not worked that way either :-((
If anyone is interested I can post the resolved codes, but not sure if I can post it in the forum or not ;-)
Regsitry entry to enable SLDR mode
I found this definition in B44C7A84-5068-4b43-A1E5-F870A80F6FF8.rgu:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\UsbFn]
...
"OsMode"=dword:0 ; 0 for Main OS, 1 for SLDR
....
Is the download mode == SLDR mode?
Since maybe we can set this entry "somehow", and upon next reboot we will get into download mode so we can flash the device?
So the question is, what is SLDR mode? Secure Loader mode? I don't know this, a more pro in this area should help out ;-)
UPDATE
I was able to read the value (0) and write it back (0). Did not tried to write 1 there
Hey guys. I know this thread is about programmatically enter downloadmode, but I wanted to try the 301k resistor trick and I can confirm it works on Samsung Omnia 7.
I used this guide. If you're gonna do that too, then you should pay attention to these things:
- The guide refers to pin 4 and 5 being closest to the headphone socket. But on the omnia 7, the headphone and micro-usb sockets are the other way around if you compare it to the Galaxy S. The guide is for the Galaxy S, so you should really pay attention to which pins you solder the resistor(s). This is the best picture on how you should solder the resistor(s).
- Many micro-usb cables have no wire for pin 4. Some connectors don't even have a pin 4. You should first verify that your connector has all 5 pins. If you only have 4 wires, then you have to dismantle the connector and solder directly on the back of the connector.
I switched off my Omnia 7. I plugged in my jig and it went to downloadmode immediately.
It's late now, so I will see tomorrow what I will be going to flash on it. There quite a few roms and I'm not sure which one I should use. I have to figure that out first.
If anyone has questions about how to make a jig, just ask. I know how to make one now.
You should post pictures, how to make such a cable. Thanks
FromOuterSpace said:
You should post pictures, how to make such a cable. Thanks
Click to expand...
Click to collapse
The picture I linked to in my previous post look pretty clear to me. It shows what pins you have to use. The guide I linked to contain all the other necessary details. If you have any specific questions about something that is still not clear, you can ask me.
Hello all, Sorry for the dumb question but i'm pretty new to VB.Net CF.
I'm working on a little program that exports settings from the registry and then writes to the SD card for XDA_UC to import when a new rom installed. I'm currently struggling with the error checking code. I want it to be able to tell if there was an issue updating an already existing file with new settings but i can't seem to find a way to do it. I have managed to get it to check the file was written but this only works the first time. After that it always reports a success if the file is present in the expected location.
I've pated what i have below. I appreciate all and any thoughts you may have.
Code:
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Private[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Sub[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] BTIdent_Click([/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]ByVal[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] sender [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]As[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] System.Object, [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]ByVal[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] e [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]As[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] System.EventArgs) [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Handles[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] BTIdent.Click[/SIZE]
[SIZE=2][COLOR=#008000][SIZE=2][COLOR=#008000]'Setup The variables so we can have them ready to write the .reg file[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Dim[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] BTIdentity [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]As[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]String[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] = Registry.GetValue([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\General"[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2], [/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"DeviceName"[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2], 0)[/SIZE]
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Dim[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] sw [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]As[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] IO.StreamWriter = IO.File.CreateText([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"\Storage Card\BT_Ident.reg"[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2])[/SIZE]
[SIZE=2][COLOR=#008000][SIZE=2][COLOR=#008000]'Format and then write the reg file to disk[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2]sw.WriteLine([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"Windows Registry Editor Version 5.00"[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2])[/SIZE]
[SIZE=2]sw.WriteLine()[/SIZE]
[SIZE=2]sw.WriteLine([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\General]"[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2])[/SIZE]
[SIZE=2]sw.WriteLine([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"""DeviceName""="""[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] + BTIdentity.ToString + [/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]""""[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2])[/SIZE]
[SIZE=2]sw.Flush()[/SIZE]
[SIZE=2]sw.Close()[/SIZE]
[SIZE=2][COLOR=#008000][SIZE=2][COLOR=#008000]'Check that the file wrote successfully (this needs work becuase it will always report "operation successful" once the file has been written once[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]If[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] File.Exists([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"\Storage Card\XDA_UC\BT_Ident.reg"[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2]) [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Then[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2]MessageBox.Show([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"Operation Complete."[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2])[/SIZE]
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Else[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2]MessageBox.Show([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"Operation Failed."[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2])[/SIZE]
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]End[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]If[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]End[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Sub[/COLOR][/SIZE][/COLOR][/SIZE]
[/COLOR][/SIZE][/COLOR][/SIZE]
You could use FileSystemInfo properties of the file to make sure it was actually updated.
Code:
Dim fsi As FileSystemInfo = New FileInfo("\Storage Card\XDA_UC\BT_Ident.reg")
This will reveal the FileSystemInfo properties of the file, as defined here:
http://msdn.microsoft.com/en-us/library/system.io.filesysteminfo_members(v=VS.71).aspx
LastWriteTime is the last time the file was written to. If it wasn't within the last few seconds then the update has failed.
I've got to a point in my project where i actually need to look at doing this so thanks for taking the time to post.
this i what i've come up with so far
Code:
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]If [/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2]File.Exists([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"\Storage Card\XDA_UC\VolumeTest.reg"[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2]) [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Then[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Dim[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] fsi [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]As[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] FileSystemInfo = [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]New[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] FileInfo([/SIZE][SIZE=2][COLOR=#a31515][SIZE=2][COLOR=#a31515]"\Storage Card\XDA_UC\volumetest.reg"[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2])[/SIZE]
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]If[/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2] fsi.LastWriteTime = DateAndTime.Now [/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Then[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2]OpComplete()[/SIZE]
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]Else[/COLOR][/SIZE]
[/COLOR][/SIZE][SIZE=2]OpFailed()[/SIZE]
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]End [/COLOR][/SIZE][/COLOR][/SIZE][SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]If[/COLOR][/SIZE][/COLOR][/SIZE]
[SIZE=2][COLOR=#0000ff][SIZE=2][COLOR=#0000ff]End If[/COLOR][/SIZE][/COLOR][/SIZE]
It should work but i would like to say dateandtime.now +/- say 5 seconds and i'm having trouble figuring that part out.
Any ideas?
This should do the trick.....
Code:
Dim Seconds5 As New TimeSpan(0,0,5)
If File.Exists("\Storage Card\XDA_UC\VolumeTest.reg") Then
Dim fsi As FileSystemInfo = New FileInfo("\Storage Card\XDA_UC\volumetest.reg")
If (DateAndTime.Now - fsi.LastWriteTime) < Seconds5 Then
OpComplete()
Else
OpFailed()
End If
End If
Alternatively, drop line 1 and put it straight into the compare, as that what the compiler will do anyway, when you switch it to a 'Release' build.
Code:
If File.Exists("\Storage Card\XDA_UC\VolumeTest.reg") Then
Dim fsi As FileSystemInfo = New FileInfo("\Storage Card\XDA_UC\volumetest.reg")
If (DateAndTime.Now - fsi.LastWriteTime) < New TimeSpan(0,0,5) Then
OpComplete()
Else
OpFailed()
End If
End If
Cool, thanks. I really do appreciate you taking the time to help.
Hi all,
First of all, sorry if this is not the right forum section, not sure where to post my problem. ( and yes i don't have a moto 360, but watchmaker is the problem )
I have a script witch store in variable my next appointment. The script is working and refresh variable but only when i run it manually ( by pressing the back arrow in editor mode )
The function on_minute() is working ( thank the vibrate ), but my variables ARE NOT UPDATED automatically, any idea why ? Thanks a lot !
Here is a short video that demonstrate the problem ( script in description too ) :
Youtube : https://youtu.be/yLUiOppldOc
Script :
Code:
function on_minute(dt)
--wm_vibrate(100,3)
rdv_one()
rdv_two()
getweek()
end
function getweek()
if {ddw0} == 0 then
var_myweek = math.ceil(({dw})+1)
else
var_myweek = math.ceil(({dw})+0)
end
if math.ceil(var_m_myweek ) < 10 then
var_myweek = '0'..var_myweek
end
return var_myweek
end
function rdv_one()
if {cex} == true then
if {c1ep} == 1 then
var_rdva = {c1t}
else
var_rdva = {c1b}..':'..{c1t}
end
else
var_rdva = ''
end
return var_rdva
end
function rdv_two()
if {c2ex} == true then
if {c2ep} == 1 then
var_rdvb = {c2t}
else
var_rdvb = {c2b}..':'..{c2t}
end
else
var_rdvb = ''
end
return var_rdvb
end
Watchmaker 4.9.8 2249801
Ok, nevermind, after lot and lot of test and try, i deleted all the script and use only lua code in each text field.
This is ugly, but it work !